The front diff on those bikes are controlled by a magnet, power needs to be applied to the magnet for it to lock into 4x4, so send power to it and back to ground, just a helpful tip if you have and trubbel
@TuttleScott
5 жыл бұрын
they usually need their fluid changed too. no one ever does it and the clutches stick.
@355east3
5 жыл бұрын
@@TuttleScott they also take diamond drive fluid too not 80w/90
@TuttleScott
5 жыл бұрын
I seem to recall you can use some kind of ATF in them, I cant recall which but I googled it on the polaris forums when I had one way back. I'm talking about the locks in the hubs btw, not the central differential.
@Hoggdoc1946
5 жыл бұрын
So they need to put a battery in it. That way they would have good lights too.
@kodybyrdarmwrestling1767
5 жыл бұрын
Scott Tuttle atf works just as well as demand drive.
@CarsandCameras
5 жыл бұрын
BEFORE YOU COMMENT: consider the costs and labor going into rebuilding the 300cc engine. Around $800 (or more) JUST for a 300cc four stroke engine. We have non-Predator builds in the works. This one turns out awesome! Have a great day!
@almightysoul4475
5 жыл бұрын
itll be fine
@AT_motors
5 жыл бұрын
A stock rebuild atv doesn't fit what you guys do on your channel. What would be the point of that? A bunch of wasted money and boring content.
@crazytalktime5617
5 жыл бұрын
I’m glad you didn’t try and rebuild the stock motor, what fun would that be. I like seeing predator motors stuffed into all kinds of different things.
@AT_motors
5 жыл бұрын
@SirBongsAlot they have never done a stock rebuild on anything. Why would they start now? Go watch mustie1 if that's what you're into. This obviously isn't the channel for you.
@98LSxS10
5 жыл бұрын
John/Issac keep doing what you do. You guys make great content and you have a blast doing it. That's all that matters. Can't please everyone and you listen to what subscribers want but sometimes it's just not feasible. You always comment on that when your not able to and explain why. Keep up the great work.
@BK-it6wg
5 жыл бұрын
You tube:" please rebuild the original engine 😥" Cars and Cameras: *chops the original torque converter in half *jazz music stops*
@Chris-yy7qc
5 жыл бұрын
Yeah, I was like: NOOOOOOOOOOOOO. I was hoping its an 1st april joke until they actually started cutting.
@gunnyfineproductions782
5 жыл бұрын
I think it’s awesome
@adew4u2enjoy
5 жыл бұрын
Why, this channel isn't about restoring factory bikes, it's a gopowersports endorsed channel on how to make stuff work using a wide variety of parts. I personally am in love with Predator engines.
@BK-it6wg
5 жыл бұрын
@@adew4u2enjoy lol it was a joke
@adew4u2enjoy
5 жыл бұрын
@@BK-it6wg All good.
@MagnusDominus1
5 жыл бұрын
Umm... Did you forget something? Maybe a little lubrication?
@Torchedini
5 жыл бұрын
Well it is the first of april.
@imagineaworld
5 жыл бұрын
@@Torchedini this
@Chris-yy7qc
5 жыл бұрын
Yeah, you were able to hear the engine slowly revving down. Ike only killed the ignition. An engine lock up sounds completely different: 1 big bang and its stuck.
@FishFind3000
5 жыл бұрын
Chris not always it can slowly start locking up(losing rpm) then quit suddenly.
@Fz-bo7sm
5 жыл бұрын
Chris have you never seen a 2 stroke seize?
@arj134
5 жыл бұрын
Why not put the Ducati engine in it
@arj134
5 жыл бұрын
Even if the frame couldn't handle it they have welders and can weld so they could stiffen the frame up so yea
@arj134
5 жыл бұрын
True completely over looked that stuff lol but hey it would be spectacular to see how long it would last though.
@TheBestOrion
5 жыл бұрын
@McGill's Garage the Ducati has it's own internal clutch and gearbox, so the axle would be the only thing that would be a concern. Even so, it'll be fine. Do it! :D
@overyonderjustapiece
5 жыл бұрын
Some people are just OBSESSED with that Ducati engine!! Let it go!! Maybe they will build a new rail and have it rear engine Ducati power. Or even a sand rail!! Just have the votech machine shop build a 2" axle with Miata hubs all machined from a solid piece of forged steel. Then they just have to figure out the bearing installation and sprocket installation.
@TheBestOrion
5 жыл бұрын
@McGill's Garage oh, I see now. That makes sense.
@98LSxS10
5 жыл бұрын
Everyone complaining about the 420 , re-watch the first part of the video. He explains everything. 420 motor just worked best for this project. It's a hunk of junk ATV that was used and abused, taken apart and most parts missing. To restore the quad would cost way more than it's worth. What they do is find cheap not running recreational vehicles and get them running anyway possible for the cheapest possible and have a blast with them. Just enjoy the awesome content they make. There are plenty of restoration channels out there for that kind of content. They always make a point to comment in the beginning of their videos if what their doing isnt majority wanted, about why they aren't doing it that way.
@98LSxS10
5 жыл бұрын
@@TUGG75 that's the point. Its ment to be a yard kart of sorts. They probably paid no more than $200 for it. The 420 on the murrey is still goin and its stock. And that motor is still under warranty so they will get a new one free. Most likely itll sit in the shed after a bit then get stripped for parts to build something else. And the circle of ratty shit busted up Polaris ATV life moves on. Half the fun of it is building it
@Jalapenogoesintight
8 ай бұрын
It blew up or whatever this is nonsemse
@athuldev5307
5 жыл бұрын
Send that old engine to mustie1 he will get it running
@hobojoe9284
5 жыл бұрын
Athul Dev what a guy
@imagineaworld
5 жыл бұрын
Shit, ill get it running!!!
@tbah9402
5 жыл бұрын
For under 100$
@austindavis3158
5 жыл бұрын
@@tbah9402 for free
@tbah9402
5 жыл бұрын
@@austindavis3158 points
@Maybe1Someday
5 жыл бұрын
Engine blows an you only get up to 2 mph. *Impressive*
@benjaminfranklinhawkeyepie9721
5 жыл бұрын
Oil is important in a gas engine
@shymekamoore4308
5 жыл бұрын
@@benjaminfranklinhawkeyepie9721 that's true
@akuvillejaakkola9491
5 жыл бұрын
@@benjaminfranklinhawkeyepie9721 yep. Also it's april fools day
@benjaminfranklinhawkeyepie9721
5 жыл бұрын
@@akuvillejaakkola9491 that would be good
@Hoggdoc1946
5 жыл бұрын
Did the engine factory forget to put oil in the engine? Did they check the oil before running the thing? Both unanswered questions.
@garymathews9534
5 жыл бұрын
I like the builds using the predators engines ,it shows how to revive a fun toy in a affordable way
@sweeneysweeney1901
5 жыл бұрын
Can't wait to see if it's at mini mayhem. I thinks it's a sweet build putting a different engine on it . You get atv frames with blown motors for pretty cheap.
@therobb5738
5 жыл бұрын
Mustie1=Original engine rebuild/refurb. Let's make it happen.
@supplykayo3049
5 жыл бұрын
I want to see them rebuild the engine
@Hammerjockeyrepair
5 жыл бұрын
@@supplykayo3049 why?! They were junk when they were new. Just another reason polaris would change atv designs every 2 years
@alasdair4161
5 жыл бұрын
@@Hammerjockeyrepair maybe he meant rebuild the 420.. at least it would be good to see what failed in it.
@Hammerjockeyrepair
5 жыл бұрын
@@alasdair4161 possibly. Id rather rebuild that 420 than a polaris boat anchor!! But with the warranty, id just bring er back and go for another round
@MrJay519
5 жыл бұрын
im thinking your forgot the oil lol
@akuvillejaakkola9491
5 жыл бұрын
1.4
@akuvillejaakkola9491
5 жыл бұрын
1st of April I wonder what day that is
@robertwright1818
5 жыл бұрын
Yes they I did forget the oil I was thinking the same thing.. lol not to smart on there part.
@SportbikerNZ
4 жыл бұрын
@@robertwright1818 Except they didn't. Nice false accusation though.
@shawntl
5 жыл бұрын
Love when you all do this kind of stuff
@ProlificInvention
5 жыл бұрын
*CarsandCameras* Keep the cut off piece of the engine plate/belt cover, if you ever decide to go back to original you could use those Harbor Freight Alumiweld rods, I have had great success with those. Great videos guys, I've watched and thumbs up them all (and commented 😂)
@stevefrance4036
5 жыл бұрын
IKE DID IT AGAIN LOL . LIKe to see the dirt bike and chopper come back cant wait to see how this project and the blaster turns out
@allthoseclips582
5 жыл бұрын
Id like to see a 212cc chopper built for mpg.
@pathaze4299
5 жыл бұрын
Ike’s Engine Destructions 😂 1. Predator 212 on the go kart 2. The 670 V-twin on the drag rail 3. The Predator 420 on the Polaris ATV
@murphyking79
5 жыл бұрын
oil is not for testing purposes only. So glad to see helmets at .2 miles per hour
@deebo3864
5 жыл бұрын
lol the first half of your comment should be on a t-shirt. Thats funny!
@tyler-the-US-trucker
5 жыл бұрын
Do you two ever get mad at each other on projects
@CarsandCameras
5 жыл бұрын
No, but sometimes we get frustrated when we have hard deadlines to meet, but it's never anger at each other
@kisamekinghoshigaki6116
4 жыл бұрын
@@CarsandCameras you guys should put stage 4 parts in that 420cc
@JamesCouch777
3 жыл бұрын
@@CarsandCameras it's amazing how well you guys get along with each other.
@wvbigboy94gaming90
3 жыл бұрын
They are best buddy’s I don’t imagine they probably ever have anger towards each other when you have a real best friend like that it’s very very rare for the two to have anger towards each other just speaking from life experience lol.
@treysayer9077
3 жыл бұрын
@@CarsandCameras thats good to hear I've had the same question for a couple years
@rong4189
5 жыл бұрын
You're the only ones who say 'Clear' before you start to weld. Appreciate it. Gives me time to turn my head away from the screen!
@mrappleproDW
5 жыл бұрын
I also have a 200cc Yamaha Blaster. The engine was blown when I got it, so I got an $80 rebuilt kit and now it runs great
@josteincarlsen2905
5 жыл бұрын
Perfect video! Cool and cheap engine swap. Why anyone want to see the old engine in again I don’t know...
@evanmullen78
5 жыл бұрын
4x4 four-wheeler + golf kart = 4x4 mini truck. I think this would be a sweet build
@johnpauljansen9206
5 жыл бұрын
come on guys, I would like to see some variation like a 670
@jeremyswallows1984
5 жыл бұрын
John Paul Jansen seriously! I wonder what happened to the Honda Davidson..
@bryduhbikeguy
5 жыл бұрын
AS soon as I saw that loose axle boot,I started looking in my history of sights I buy from.It's there,if you need parts for Most atv,lawn tractors,etc..Great vid again guys.!
@bryduhbikeguy
5 жыл бұрын
OK.So I don't look like a complete ass,to some,the part is the CV-Boot.I knew this,I was just caught by the drive axle talk.OK?LOL.Thnx.
@Ratkill9000
5 жыл бұрын
I have a YSF200 (Blaster) as well and it's well a blast to ride. Definitely recommend Yamalube oil for it and also recommend deleting the oil injection and run Yamalube low ash mix oil in it instead. If the oil injection were to go out, you could seize the engine. Upside is, 2 strokes are dirt cheap to rebuild.
@bghouse2853
5 жыл бұрын
I’m actually excited to see this thing work. Very interested
@JUGGERNAUT606
5 жыл бұрын
Ike, it's always you because you can always fix it man👍
@philtripe
5 жыл бұрын
is there oil in it? i know its a dumb question but its easy to forget the simple things sometimes when your deep in building stuff
@PowerstrokeBoiz
5 жыл бұрын
420 on everything ? But of course!
@billyboots3730
5 жыл бұрын
They went from 17hp to 13hp, really wish they done something other than predator engines
@PowerstrokeBoiz
5 жыл бұрын
SirBongsAlot All they care about is making money. But yet not focusing on their audience that put them where they are now.
@slyknowledged
5 жыл бұрын
I can't make it all the way out to the meeting, but if you built a trophy/display out of parts to hang on the wall I'd buy it. Wall art for a shop with parts from projects to rep you all would be kickass. I'd even take old project stuff, been watching you all since around 2k subs.
@marzsit9833
5 жыл бұрын
i've seized up a few small engines over the years and have found that putting a high torque load on a new engine scuffs up the crank bearings and the cylinder walls... what has worked for me is to test-run any new or newly overhauled engine by running a full tank of gas through it running at 3000-4000rpm with no load or anything connected to the crankshaft, then change the oil. after an initial run you can then load it as much as you want. even when i buy something new like a lawnmower or pressure washer, i unbolt the pump or the blade and run the engine in.
@charleshank8573
5 жыл бұрын
I hope you boys remember to put oil in that before you blew it up but congratulations I like your enthusiasm and perseverance on getting things done give you five stars as always, ⭐⭐⭐⭐⭐😎👍
@jacksonmcghghy4773
5 жыл бұрын
It did come from the golf cart didnt it so it should have
@mattsez2879
5 жыл бұрын
@@jacksonmcghghy4773 no it didnt.....came out of the box new
@michaelcook768
5 жыл бұрын
The best part is these guys are great friends...that makes it so real...cause it is.
@topkek7003
5 жыл бұрын
they probably did, just didnt film it because we've seen it so many times
@staceystarling15
5 жыл бұрын
Wonder if it was from harbor freight
@chrisatc627
5 жыл бұрын
Grabs the hot metal bare handed right after he cuts it 😂😂😂
@karl6823
5 жыл бұрын
Cant wait for the blaster content!! Ive had mine for 21 years!!
@YeeThirty
5 жыл бұрын
Yo blasters rip.... honestly sick quads.. good score mates
@mikefalcone9157
5 жыл бұрын
Ive had a few good ideas for you guys for quite some time. Not that you guys have any shortage of new content. But what if you came up with a contest of some sort to get fans more involved. Like maybe have people come up with totally original ideas, and whoever has the best idea maybe gets to go to NC to help you guys with the build? Or maybe just win the build itself, or possibly both! There's alot of us out here that dont have a garage to build anything, but next to yourselves have great minds and know how to build things! Keep up the good work dudes!!
@steveroach6043
5 жыл бұрын
For testing purposes only a small block Chevy will fit on the frame with minor modifications,with a short shaft power glide, I did this already & for testing purposes I ran ,open headers at the mudbog ,283,300 hp. ,hell of a ride !!!!!!! It's like a v-8 pulling tractor!!!!! Nice rooster tail !!!!! Try it Ikey you'll like it !!!! Don't do this at home ,the yard is all messed up !!!!! Whoops !!!!!!
@mten8965
5 жыл бұрын
You got that right used Polaris are a dime a dozen have fun👍🎥😎
@Maverick_Van_Traveller
5 жыл бұрын
Man I miss the GoPowerSports discount codes. The giveaways are a neat idea, but the 10% discount was REALLY handy for those larger orders.
@wheelman5600
5 жыл бұрын
Buys brand new 420 forgets to properly break it in blows it up two seconds later lmao
@michaelcook768
5 жыл бұрын
That kinda stuff happens all the time. QC is sorely lacking everywhere. I've seen new Cadillacs blow an engine in 500 miles. I was a parts manager for 2 Mercedes dealerships....a $120k S class...trans failure at 10k. Nothing suprises me.
@wheelman5600
5 жыл бұрын
@@michaelcook768 I myself I do small engine repair daily I've seen lawn mower engines run completely out of oil not lock up but not run pour oil back in them start right up and run just fine so I get your point about nothing surprises me but what I don't get is how you take a brand new engine and blow it up and less than 45 minutes unless you don't properly break it in see that I own the exact same engine it's just on a snowblower instead I remember specifically reading in the owner's manual about the Predator 420 you're supposed to let it idle for up to three hours according to the book to properly break in the engine as with most new engines out the box and yes quality control kind of sucks nowadays just my two cents
@michaelcook768
5 жыл бұрын
@@wheelman5600 True. But, it is possible they broke it in before the filming started. I remember in the 90s rebuilding the 455 in my 73 Olds 88 Royale....drove it 50 miles, then the beer started talking. I had changed the cam, and put flat tops in it. It had a Posi rear...so...power brake, sets of black marks, burn outs all the way in 2nd gear...and beyond. That car had a special engine code...apparently, it had the HO engine from the 442. I wish I had kept that car.
@marvinsteel1265
5 жыл бұрын
I love the content boys but I would love to see something with a gear box or multiple gears but keep up what you doing
@connerhooper2083
5 жыл бұрын
Can’t wait to see the blaster , I have 3 of them
@89ludeawakening1
5 жыл бұрын
Polaris frame (stretched in the rear) + Ducati engine = Monster quad Yes I know it would probably be a problem fitting it, but it would be awesome nonetheless. Haha
@hunterarcher550
5 жыл бұрын
So just a suggestion. You guys should do a mini bike engine swap the a two stroke motor. Mixing gas and hauling ass
@fleamarketfread
5 жыл бұрын
If you want to do a build. Get 400ex Honda. They are the Toyota trucks of the 4 wheeler world. Torq for days and the earlier ones are cheap
@Moparbrian392
5 жыл бұрын
They are the perfect sport quad if you want to do trail riding. They are fast enough to keep a veteran rider satisfied, but not so insane to the that a beginner can't get on and gain some skills.
@benwhite4202
5 жыл бұрын
These guys sure love their lawn mower engines
@wildsidetv8094
5 жыл бұрын
So excited for the Blaster video!!!!!!!!!!!
@GtaDanK
5 жыл бұрын
I usually don't comment, but you should take the drive, and suspension from the atv, and put it on the golf cart. A 4 wheel drive golf cart would be dope!
@FattyDoveRacing
5 жыл бұрын
I think you may have forgot to put oil in the 420 XD
@joelboley2344
5 жыл бұрын
LoL who needs oil? It'll be fine! R.I.P. 420
@isaacitllbefine7231
5 жыл бұрын
It had oil
@FattyDoveRacing
5 жыл бұрын
I’ve had a new 212 blowfor no apparent reason with oil, I guess that they sometimes don’t quite put em together right in China
@isaacitllbefine7231
5 жыл бұрын
@justin roessner defective engine
@goodguy9979
5 жыл бұрын
The best part, putting the engine with electric start and charging in the golf cart!!!
@the_mystery9803
5 жыл бұрын
Understandable, good work guys.
@Mightbeok
5 жыл бұрын
Y’all need to put some of that slippery stuff in the engin to make it run gooder!
@Over-kill1
4 жыл бұрын
I love that displacement 420 not the strongest engine but it still highhly potent 👌🏿
@jasonpetrich4141
5 жыл бұрын
A blaster rebuild will be very cool guys, i would like to see what you choose to put in it and how you like it,
@fatbuddycat
5 жыл бұрын
MESSAGE TO THOSE THAT HATE : I first subscribed to this channel over a year ago. I unsubscribed because I was slightly annoyed with the mini monster truck build and some of the comments that were shared. I thought these guys were being narrow minded and cheap. I just re-subbed because I realized it was me who was wrong. These guys work hard to put these builds together, they are making things you could do in your own garage. Rebuilding ATV motors and transmissions is not for the faint of heart. It takes a lot more mechanical ability, time and money. You ever try and part out a carburetor on a 2001 Arctic Cat 250 that you already jetted? Maybe you had to rebuild the live transfer in a Polaris Scrambler 500 or had to replace the jack shaft on a Yamaha Big Wheel? Hydro locked Warrior 350? Honda Odyssey built by a tech school with 4 wheel drive, true independent suspension, the electrical system off a lawnmower and a Hayabusa/ Ski-Doo drive train? Point is, those are serious issues that take a lot of experience to fix. It is frustrating, expensive and haphazard at best if you don't end up replacing a weird gasket, seal, grommet, bearing or bushing that has to be special ordered and flown in from China, Japan, Korea or India. These boys are doing "just fine" at creating honest content, they can do anything that has to do with motors, it just wouldn't provide the same value as what they intend to.
@michaelcook768
5 жыл бұрын
I don't understand all the fuss about the Preditor. It is an excellent, affordable powerplant. Go look at the prices on a Briggs...they are f in crazy. And to buy a Kohler, it requires a loan from God. I expect GoPowerSports uses lots of Preditors because of the cost. As for the new engine going boom...shit happens! A Predator is a direct fit for a 1950s David Bradley garden tractors...everybody is using them. Ours had a Continental...can't afford to rebuild those, either. Polaris is stupid expensive. Great job, guys, in all you do. You guys love this stuff...it shows. 👍
@walkermediaworx
5 жыл бұрын
I feel like you guys should be doing a top gear style intro on some of these. "Today we hack up a polaris, turn old parts into treasures and Ike makes a predator go boom."
@vaughanbogran2156
5 жыл бұрын
That foot vice though !!!!!!!!!!
@natereinhold6180
10 ай бұрын
I have one of these quads and absolutely love it. Parts are non-existent though. My dash has went out and now it will not spin up. Havent had time to look at it/bypass it.
@eyeballengineering7007
5 жыл бұрын
I've done this swap, but I built a buggy out of the quad first. Works great stage 3!
@snowman95
5 жыл бұрын
Dude i too have a 200cc blaster two stroke. Thats cool
@fan1701
5 жыл бұрын
Rasta B TV did one very similar and His turned out great. I love how quiet the muffler made that 420.
@catskillwoodgas
5 жыл бұрын
Yay blaster! They have a great power band.
@samilbhogalgodisgreat6927
3 жыл бұрын
I wish I can receive a custom cars and cameras trophy 🔥🔥
@themadddtrucker3426
5 жыл бұрын
That 420cc mount,well..... "it was like it was ment to be!" Good stuff!!
@jamesjudd6008
5 жыл бұрын
Vito’s performance has a lot of blaster parts the super stock pistons work good
@funashextimes
5 жыл бұрын
Electric gokart build. It would be a god challenge for you guys
@williamhelms9868
5 жыл бұрын
cant wait for the blaster bcs I've been trying to fix mine forever
@gigabangdragon1186
5 жыл бұрын
Awesome video guys. Waiting for the 2nd part
@derekchristensen6670
5 жыл бұрын
A Blaster is a great place to start, you can do so many modifications to one of those.
@claytonmartin1021
5 жыл бұрын
Can y’all see if y’all can put the plastics back on it if they’ll fit. It would look so much better. But it turned out a lot better than I thought.
@TowMaters
5 жыл бұрын
420 Hype.....
@billyboots3730
5 жыл бұрын
Yay 420 again.......
@kacperburzak9514
5 жыл бұрын
Did i just i hear a blaster i cant wait 😄😄😃😃😃😃😃😃😃😃 yeay
@paintendaveextremecollisio8057
5 жыл бұрын
Great Video!! Good to see what works and what doesn’t.👍
@mowler8042
5 жыл бұрын
Awesome work boys! Chop and fit it will be more than fine.
@kaostheory2940
5 жыл бұрын
I absolutely love the Yamaha Blasters can't wait for those videos
@flhusa1
5 жыл бұрын
oil works wonders
@250xrider1988
5 жыл бұрын
As a Polaris technician, I am both laughing and cr... yeah, mostly just laughing🤣
@IndianaDoug
5 жыл бұрын
Ike should’ve said, “you know the sweet thang about this engine swap? It’s easier than rebuilding the original.” I personally like seeing retrofit engine swaps, hell throw an LS in there!
@thejoshwileychannel
5 жыл бұрын
What do y’all do with all of the stuff y’all build when they’re done?
@MAD450r2
5 жыл бұрын
Just curious. If this model has high and low range some of the polaris atvs do.
@foureye7058
5 жыл бұрын
Not anymore?
@CarsandCameras
5 жыл бұрын
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY. Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.
@mytennesseedays9528
5 жыл бұрын
My favorite build so far
@nickhill1279
5 жыл бұрын
You need put the 1000cc in it and make a drag quad it will be sick
@jamespollock6350
5 жыл бұрын
VIDEO REQUEST- buy a big performance engine like the polaris and fit it on mini bike and and gear it down to it's Torquey AF
@merlincantrell8546
5 жыл бұрын
be sure to check all seals and fluids
@AT_motors
5 жыл бұрын
Yessss. So happy you went this route instead if rebuiding the stock engine.
@imrebicyclemanszelid1496
5 жыл бұрын
Can't wait to see the Yamaha
@myknz20
5 жыл бұрын
Can't wait to see the blaster Videos as i have one that needs work to so cant wait to watch and work on it
@brandonmortenson646
5 жыл бұрын
Why not an old 2 stroke snowmobile engine they are cheap and easy to fine. That would be perfect for that quad, those predator engines are garbage in my opinion.
@dadurkey8287
5 жыл бұрын
No no no, a friggin wankel engine, those things will make anything small fly. And yes the larger predetor engines are trash, not the small ones
@adew4u2enjoy
5 жыл бұрын
Not sure why so many people comment on what you should have done. I love your channel. I personally do a lot of what you guys do, that is, make stuff work with what you have. My favorite little project is a early 70's mini bike that is full suspension stock, with a 212cc crammed in it with the pulley system. Oh man it's a torquey fun blast. I also welded and customized to accept atc tires. It's cool to see diff way's of doing things and how they work out. I live too far away to make your meets. I really wish I could make the Gambler. I wonder if there is something in AZ?
@tjmarquardt7659
5 жыл бұрын
Sweet more 4x4 atv video
@SleezyMcZeelius
5 жыл бұрын
That yamaha engine is about to be sick
@racinjayson76h98
5 жыл бұрын
It just figures, I’ll be traveling from CT to FL two days before and back three days after the meet up. I would’ve really liked to swing by and take a look at the swap because I’m doing something similar with a V twin Briggs.
@racinjayson76h98
5 жыл бұрын
PS I sympathize with all the purists but anyone can agree that this really is a huge improvement over stock for several reasons.
@ponaldo7611
5 жыл бұрын
Subscribed since under 100k subs good work guys
@aaronbennett3584
5 жыл бұрын
Hey guys! Cant wait to see the finish of this build!
@jamesduffy9756
5 жыл бұрын
Those exhaust welds are mint!👌👌
@RatzillaCustoms
5 жыл бұрын
The easier way of getting the drive shaft out is to take the speed rings out of the u joints
@MrRaab-hu9rs
5 жыл бұрын
Hey guys. How about a Mud-Skipper Longtail Mud Motor build for Tank Boat? Mud-Skipper is a bolt-on kit for Predator engines. They start at $295. There are multiple props available to tune for speeds. You can get up to 22mph on water from a stock 212cc. I wonder what a stage 2, 420 would do? You could drag race minibikes at Busco Beach in a boat.
@michaelangelod5008
5 жыл бұрын
You guys have the 5speed 200cc 4 stroke on the shifter kart why wouldnt you put that engine on this
Пікірлер: 812