Sorry for the poor focus during installation. The trick was to spread the opening with it overhanging the side, all while pushing the other side down with a screwdriver. I also want to clarify that the washer in the 7-CS spring kit is only for the Forward clutch spring cage. Wear safety glasses if you do this in a press the way I did. And be very careful not to bend your cage. There are also now inexpensive tools available that press on the case legs to compress the springs if you want to go that route. Good luck!
- Жыл бұрын
4L60E Low/Reverse Spring Cage Installation and Tips
- Рет қаралды 813
Пікірлер