hvala točno taj problem je bio..hvala na korisnom videu
@dylankren8046
Жыл бұрын
Thanks for sharing. My issue is that the white strips appear, not only dirty, but to be actually damaged and partially scratched off. This theory is also supported by the fact that the motor stops when the gears make a full rotation and return to the same doomed position Dose anyone know if this is special paint/material that is picked up by these sensors? Will white nail polish do the trick?
@rmml1965
Жыл бұрын
I manage to clean all sensors, it works fine, but as soon as I apply some pressure it will stop. Baby only 4 months, not to heavy, don't know if there is any weight sensor. Anyone as the same problem?
@SweetMartine92
Жыл бұрын
I have the same problem, 5 months, 7kg. Only stops when the baby is in it
@bilalkale852
2 жыл бұрын
This solved my problem, thanks a lot👍
@jodyrhodes3977
6 ай бұрын
So, a big reason why these don’t work is because the sensor above the black wheel at the bottom is an ir reader. Over time, the white paint on top of the wheel fades off and the sensor can no longer accurately read the speed of the motor, causing intermittent shutting down. Hope this helps someone.
@dionisebia6166
2 жыл бұрын
Thnx, it works again
@yasirkursunoglu4541
2 жыл бұрын
Kardeşim Türkçe dublaj yok mu😀😀
@kalenatomlinson8502
Жыл бұрын
omg i was going crazy and thought i tried everything this worked thank you!
@daliachavira7313
11 ай бұрын
Omg thanks alot i had tried many things and this did it !
@cristimihu1683
Жыл бұрын
It works thank you
@valeriahernandezrodriguez4863
2 жыл бұрын
Hello could you help me ?. the 4 moms works 3 seconds and it stops, I opened it and still stops I put weight on it with my hand and it works I remove my hand and it stops again. Do you know what it can be?
@abdulilahustahaliloglu
2 жыл бұрын
Hi Valeria, Sorry for replying that late. In the sensor dirt issue I had, it was working less than a second. Your's seems different but it's worth trying to clean both sensors because of this logic: If it works for 3 seconds, that means there is no problem with motors, cables etc. There remains the sensor dirt. Try cleaning both of the sensors. I hope it will fix your issue as well.
@designakayoub1889
2 жыл бұрын
It's automatic switch off after a second to start swing what will be the issue .please reply
Пікірлер: 15