Thanks guys for checking the video out! If you want to pick up a racingramfam t-shirt plz email keepitboosted@racingramfam.com
@lastamericanhero59
3 жыл бұрын
How much to add twin turbos to my 6.4 challenger??
@RacingRamFam
3 жыл бұрын
The Last American Hero how deep are those pockets lol
@lastamericanhero59
3 жыл бұрын
@@RacingRamFam i can make them deep if i Chose to
@RacingRamFam
3 жыл бұрын
@@lastamericanhero59 I mean your prob looking in that 10gs range
@lastamericanhero59
3 жыл бұрын
@@RacingRamFam so you telle that you are charging me 7000.00 to do the work?? That doesn't sound right🤔🤔
@BentonL
Жыл бұрын
This engine is hard to kill. I beat mine to 1,227,000 miles and sold it for 800 bucks barely running. I finally moved on to cummins. I miss the magnums, but the cummins has been insane. By beat I mean I red lined it every red light in its entire life.
@Pointlesshandle48
9 ай бұрын
That’s good to know. I have one and had to do the head gaskets, and I feel better about the redlining 😂
@BentonL
9 ай бұрын
@@Pointlesshandle48 As long as you keep up with the maintenance these engines are good. Everyone one that's had an issue usually dont change the oil or keep up with the maintenance. The trans, if it starts to slip learn to column shift. it will last indefinitely if you column shift it. The auto part of the trans is garbage. if you get the low oil light at the traffic lights touch the throttle a little. Don't let the oil light stay on. Mine did that for the last 400k miles. I know why it did it, it was tired.
@Ian-ju8oo
3 жыл бұрын
Literally just wanted to know about the cam swap. But the second I saw the two turbos I had to subscribe 😂
@RacingRamFam
3 жыл бұрын
It’s fun lol
@high-rise8505
3 жыл бұрын
Great video content once again! Old school vibe in a good way with top of the line information! Reminds me of the true builds that used to come on when I was a kid. Yall are doing great 👍. 🇺🇸
@RacingRamFam
3 жыл бұрын
Thanks man appreciate it!
@aaronbarnes8938
2 жыл бұрын
Another option is to have your stock core reground and using a 200,000+ mile lifters is fine if they are still in nice shape and you can take them apart and clean them. having your cam reground from Oregon cam is only $160 so that is another option for a cam and that is my go to for Smallblock roller cams I keep La and Mag roller cores for these reasons.
@TheBlowinSmokePodcast
Жыл бұрын
Where were u guys when i had my old 5.9 ram 1500 😭😭 love the content
@RacingRamFam
Жыл бұрын
Thanks!
@forgottenmuscletrucks
Жыл бұрын
Can't wait to cam my 02 Dakota R/T. Also going with intake an bigger TB. Just had my trans beefed with bigger stall an shoft kit. Can't wait to see how she runs! Keep up the good work!
@jonallen7191
3 жыл бұрын
5.2 cam is actually bigger than the 360s . I put a 5.2 cam in my 360 and it changed the fuel curve. But problem solved with the Syked tuner.
@RacingRamFam
3 жыл бұрын
Nice!
@matty2helpfull
3 жыл бұрын
I love the idea of going into depth on the srt10
@RacingRamFam
3 жыл бұрын
Thanks man! Same style of video or how should we do it differently?
@billz1316
2 жыл бұрын
Good luck finding a performance roller cam right now. I just finished a 5.9 magnum build and had to retrofit to a flat tappet just to find parts. Jeg's, Autoplicity, Summit, Comp, Lunati.......the list goes on. NOBODY had one. Love the video though, bad ass truck!!
@RacingRamFam
2 жыл бұрын
Thanks man! Ya everything pretty back ordered
@aidanbotham442
4 ай бұрын
Part Numbers: Cam: Hughes SER1418ALN-10 Lifters (x16): Sealed Power HT-2269 Timing Chain: Hughes 6442 Head Gaskets (x2): Cometic C5554-027 Gaskets: Not shown, can use Fel-Pro 260-1723 if upgraded head gaskets not needed Pushrods (x16): Not shown, can use Melling MPR-462 Valve Springs(x16): Mopar 312-P4876062 Plenum gasket: Weld, use Hughes kit, or use included gasket in felpro kit Also in video was heads, thermostat, valve covers, tune. I think it was forgotten, but for the cam listed you're supposed to use new Hughes retainers/locks/cam bolt. It's all listed on their site. If you want just a cam swap: Hughes Cam, Cam Bolt, Cam Key, Spring/Lock/Retainer Set, & 16 Lifters the current price is $960, not including any of the other parts listed like gaskets, pushrods, heads, tune, etc
@aidanbotham442
4 ай бұрын
Also if your block is trashed like mine probably is with 280k miles(I'll be doing this swap in a month) you can get a stroker block from ATK for $3000, which includes a $2000 crank set, so you're only paying $1000 for a "new" block and all the machine work. Pretty good deal IMO
@DBGrimson
3 жыл бұрын
Great video guys, its awesome how you both are not only letting people know the cost of the parts but what parts to properly install on there trucks if they want to go that route. Thank you guys for those three videos. It helped me out when I was needing information and not really able to find a reliable answer. But you guys gave the Golden ticket answers I was looking for. 🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸
@RacingRamFam
3 жыл бұрын
Hope the projects going better! Twin turbo Durango going to be a ripper 🌶
@DBGrimson
3 жыл бұрын
@@RacingRamFam still waiting on the map sensor and connection to be delivered. I got the battery relocate done and the gauges. Got the new fuel bump in to be installed and the exhaust is almost set. Should have a video up by sunday.
@RacingRamFam
3 жыл бұрын
@@DBGrimson nice man sounds like a lot of work!
@kytenbaber1602
3 жыл бұрын
Just bought a single cab auto. I look forward to keepin up with y’all!
@RacingRamFam
3 жыл бұрын
Thanks Man!
@trent.c5071
3 жыл бұрын
These guys have such a drake and josh vibe😂
@RacingRamFam
3 жыл бұрын
Why do you say that lol 😂
@austinnoble3713
3 жыл бұрын
I sure hope not😂
@staycool72
3 жыл бұрын
The factory 5.2 cam is a nice cam for the 5.9, the 5.2 cam is 432 lift intake and 432 lift exhaust, which is a better cam than what comes in the 5.9
@RacingRamFam
3 жыл бұрын
That’s still tiny
@staycool72
3 жыл бұрын
@@RacingRamFam that is what came stock in my 5.9 from the factory with the Mopar performance PCM and that along with the Hughes FI Air Gap intake and my truck hauled ass, now I’m building the motor as a 408 Stroker with a much beefier cam
@barneyfelix5906
2 жыл бұрын
How did it come from factory like that, what made that ram special.
@barneyfelix5906
2 жыл бұрын
For Gary benoit
@tomreyn3610
2 жыл бұрын
Yea. Both stock cams are lumps on a log. Better cams are $$$ Re-use lifters. BUT, stocks springs are shit and machining to use better springs , costs but necessary. Drop the stock MPi. Carb. And run old school dizzy ignition. - been there. Done that. - good for you. Good luck. - what is your 1/4 mile time. ?
@frigglebiscuit7484
3 жыл бұрын
btw, the 5.2 cam is bigger than the 5.9 cam. the stock 5.9 cam is the same lift cam used in the mid to late 80s smoggo 360s.
@marmadukedeeznutz5624
3 жыл бұрын
That is true but not for all years
@randallamik3230
9 ай бұрын
Not exactly the true price to do a cam swap. Lots of additional parts that are not needed for a standard swap
@lifeonadime4703
2 ай бұрын
Nice parts/price layout 🤘. I just bought a 98 rcsb v6 5 speed with a dead cylinder for $1200 and drove it home lol (and to work a few times) im going to junk yard 5.2 swap it in the next month or 2 and while the engine is on a stand, i plan to do gaskets, timing chain, hughes plenum fix, etc so itll be reliable. I just might throw one of those hughes cam/springs/pushrod combos in there while im at it..🤔. The v6 is pretty much dead and smokes like a freight train lol but, the truck was so clean and isca manual so i just couldnt pass up a good deal. They are so easy to Magnum swap, there is no way id put another 3.9 in it 🤮
@RacingRamFam
2 ай бұрын
Ya 3.9 is a boat anchor
@lifeonadime4703
2 ай бұрын
@@RacingRamFam absolutely lol. It would be a turd even if it was hitting on all 6
@insomniahobbies
3 жыл бұрын
Once you said "roll the clip" it jumped to an advert about some guy doing a make up tutorial.
@-ouv
3 жыл бұрын
😂😂😂😂 That's funny but KZitem premium
@RacingRamFam
3 жыл бұрын
Lol @youtube I can delete that when I get home
@aaronmorgan9795
3 жыл бұрын
I got one about that to
@SeansLittleBayofHorrors
3 жыл бұрын
As a dealership tech for nearly 20 years (9 of them with Mopar) I'm in your shoes. I have so much crap. And even then, I never pay retail for anything. Lol. I want to see details on the SCT tuning. But make the SRT-10 video, a lot of people will like it.
@RacingRamFam
3 жыл бұрын
I think we will be waiting a bit on the srt10 video. But yes fuel system going in this weekend then driving video then I’ll go over in depth how to setup a base map I’m thinking doing a live stream?? What do you think
@troybrook3041
3 жыл бұрын
@@RacingRamFam Live stream sounds great!
@RacingRamFam
3 жыл бұрын
Troy Brook I think that would be best to get everyone questions I just want to get a really good hang of it first
@SeansLittleBayofHorrors
3 жыл бұрын
@@RacingRamFam it is tough for me to catch live streams.
@RacingRamFam
3 жыл бұрын
Sean Moore oh dang I can make them a video afterwards too
@dirtyboy8336
3 жыл бұрын
I have a 99 Dodge Ram 1500 I just wish I can find a good mechanic shop that's honest when it comes to fixing my truck. You guys was honest I wish you two was out here in Atlanta Georgia to modify my car for $3,000 that would be a blessing
@RacingRamFam
3 жыл бұрын
Do it yourself easy and rewarding know you did it!
@dirtyboy8336
3 жыл бұрын
@@RacingRamFam Thanks. I really should do it Myself i know how to put the parts on I'm just being a bit lazy of myself. I'm the only one knows best about the Truck anyways Thanks again 💜
@RacingRamFam
3 жыл бұрын
Very true! And ya man
@billcat1840
3 жыл бұрын
For 3k you can make it quick yourself.Im in Abbeville SC and have been a ASE certified tech for 30+ years.I can get you 300hp at the crank without a cam change. First you gotta let these things breathe.The keg manifold can be easily modified and will really wake it up above 3000., with little loss of bottom end power. Just this mod is a definite seat of the pants improvement..Next I fashioned a cold air induction retaining the factory box with a K&N panel filter. I relocated the IAT to the airbox. This tricks the PCM into running a little richer. The thermostat is changed to 180°. The coilis an Accel unit relocated to the firewall to run cooler and shorten the coil wire.I use Accel brass cap and rotor..An MSD 6A fires E3 sparkplugs thru Accel 8mm wires. Stainless steel shorty headers and true 2.5 duals eliminating the y pipe into a dual inlet/outlet Flowmaster 40 series..The muffler configuration is needed because pipes must be run down passenger side and split over the axles. The rear is stock with 3:55 LSD..An electric fan from a 95 V6 Mustang keeps it cool in southern summers.The fan was probably the second best mod for power. Other small mods are polishing the throttle body and trimming the bracket that hangs over the bores. This has resulted in a 5.2 Dakota that embarrasses 5.9 RTs.. I imagine I have the quickest 318 in the county 😁. I plan to replace the heads as they are crackers and tho they don't leak, I'm sure with my hard running, they probably are crackers. Thinner 1028 Mr Gasket .028 head gaskets are going in along with a small Hughes cam. These things have huge potential. They come with 1.92 intake valves and 1.6 exhaust. So the breathing potential is there. Also the rod / stroke ratio is perfect on these motors and they have long forged rods that reduce cylinder bore loading for good long wear.
@RacingRamFam
3 жыл бұрын
Quickest 318? I think whitie might have ya lol
@devinbaker8520
3 жыл бұрын
Thx for releasing this video
@RacingRamFam
3 жыл бұрын
Thanks for watching!!
@TheWesternWest818
2 жыл бұрын
Love those MN plates!
@RacingRamFam
2 жыл бұрын
Thanks lol!
@thelatenightnerd2851
3 жыл бұрын
I got a dodge sst and this helps out a lot! Thanks .
@RacingRamFam
3 жыл бұрын
Ya man!
@machineshopchronicles2787
2 жыл бұрын
I wanna see you guys put a .600 lift hyd roller cam in a 5.9. I have a custom Howard hyd roller in my 5.9 and it’s massive. I do believe I have the hardest thumping 5.9 out there but I could be wrong.
@RacingRamFam
2 жыл бұрын
Ya that would be sweet! Need about 2gs to do it
@0nux229
Жыл бұрын
Post a video I want to hear it
@leakyjeep5.9
3 жыл бұрын
Im in St Paul, so I should just drop my 5.9 jeep off at your place 😉. I'm going to need new heads 217k.. , but haven't gone past replacing the intake gaskets.
@RacingRamFam
3 жыл бұрын
leakyjeep5.9 lol!
@HardwayLearning
3 жыл бұрын
We love a lumpy dumpy cam!
@RacingRamFam
3 жыл бұрын
BiG LuMpY
@megasvarshik
2 жыл бұрын
Hello again from Russia! 👋👋👋😉Tell me where I can read all these upgrades of Magnum 5.2-5.9 in text format? And have you already decided to integrate the engine oil electrical pumping scheme before starting ? :-)))
@RacingRamFam
2 жыл бұрын
I have not but I love the idea!
@megasvarshik
2 жыл бұрын
@@RacingRamFam My idea for pumping engine oil is very good, and most importantly it works!!! - my Magnum 318 loved it:-) Think about how modern Japanese cars with automatic transmission work! After all, now all these cars are on the "start-stop" system (Sorry, I don't know how it sounds in English LOL). But the point is when the ECU of a modern Japanese car "understands" that the car is in traffic and you need to stop the engine. :-))) How will the hydraulic automatic transmission system work after that to move the car?)))) For this reason, the Japanese came up with 12V. oil pumps for automatic transmission:-)))))) My thought is, what do you say?
@RacingRamFam
2 жыл бұрын
@@megasvarshik oh yes it’s a awesome idea! Do you have a oil switch so if it’s below a certain psi it kills the engine?
@megasvarshik
2 жыл бұрын
@@RacingRamFam Sorry, friend, I need time to translate your answer into Russian:-))) (the built-in translator on KZitem has not yet been connected:-))) No, I did not assemble such a scheme in order for the engine to stop automatically when there is insufficient oil pressure. But this is a simple scheme: friend, you need to look into the electrical circuit of the ignition switch and connect the 12V relay. control the opening of the +12V control. At the same time, the logic will be interesting, if you have an electric oil pump from a Japanese automatic transmission that does not create pressure in the engine lubrication system, then you will not be able to start the engine at all! As you saw in my video, the original oil pressure indicator is installed and it allows you to understand what pressure is in the system, and you can always stop the engine as usual in manual mode;-)
@amymeyer6797
3 жыл бұрын
Nice shirts! Good video!
@RacingRamFam
3 жыл бұрын
Thank you!
@oregonisnotabluestatekmats117
3 жыл бұрын
I really like ur video brother ssss nice nice nice yaaaaa keep em rolling
@hausboxes
3 жыл бұрын
Dang fellas. I need yall to come do springs and cam in my 2nd gen magnum. Come on down
@RacingRamFam
3 жыл бұрын
Not to bad to do!
@aaronmorgan9795
3 жыл бұрын
you guys finally got 5K subs now
@RacingRamFam
3 жыл бұрын
Ohhh yes!
@kennethsonier1766
2 жыл бұрын
Great information and a great video guys 👍✌️🇺🇲
@michschep7601
10 ай бұрын
5.2 has sooo much potential..... open up the intake and exhaust chambers, nothing radical, biggest gain is just deshrouding valves..... stage 1 cam, and open up that kegger a little.... wakes em right up
@Madhuntr
2 жыл бұрын
fucking finally a i find you. i also want to tune my 5.2L a bit cam would be the start for me and then slowly go up from there. thx guysonly thing i would like are some links to all the parts. here in germany you pretty much get NOTHING
@RacingRamFam
2 жыл бұрын
Dang!
@TrevorKlibinski
3 жыл бұрын
We want to see a pull with whitey
@RacingRamFam
3 жыл бұрын
Soon still working on stuff. Fuel system this weekend
@chriseller757
2 жыл бұрын
You know these guys be playing tummie sticks late at night.
@RacingRamFam
2 жыл бұрын
Only if you joining!
@aaronmorgan9795
3 жыл бұрын
are you going to make a parts list of everything that you bought?
@RacingRamFam
3 жыл бұрын
Yes I want to make parts lists on my website
@coybennett98
Жыл бұрын
I have 2 Jeep zj one with the 5.9 and one with the 5.2 Magnum. and I always wondered if it’s worth building the moters for power or just swapping in a 5.7 hemi
@kushkiller7108
3 жыл бұрын
Great video
@RacingRamFam
3 жыл бұрын
Thanks!
@rtownsend744brad
3 жыл бұрын
Thank you!
@ricardovasquez4184
Жыл бұрын
I need y’all to go a LS swap on my 72 Datsun 💪🏾
@jforeign2287
2 жыл бұрын
Got a Dodge Ram 2001 5.9. Look what should I do first
@RacingRamFam
2 жыл бұрын
Yes lol a lot of options out there
@BubbaX
Жыл бұрын
More like 1,000 becuase you don’t need new heads, valve covers, and head studs
@prior8t2000
2 жыл бұрын
This is post an old one..But, what's it cost for a CAM Swap that's not going to be a Thumpy CAM..??.. something that's a tad bit better than a 360 OEM Style Standard..??..
@DoorKicker
22 күн бұрын
Are stock pushrods good to run or do you need a set specific to the new cam? 3:47
@RacingRamFam
22 күн бұрын
@@DoorKicker you can run stock pushrods but there usually the incorrect length with a custom ground camshaft. You also will make less power with stock pushrods due to them bowing and flexing not allowing you to use all the lift and duration from your new big camshaft. So personally the only place stock pushrods belong are in the garbage
@DoorKicker
22 күн бұрын
@@RacingRamFam Thanks. 🤘🏻
@MrThomasfouraker
3 жыл бұрын
Great Content. Were the cam bearings good on those motors? I have pulled three magnum cams and all three had cam bearing problems on 3 or 4. In the process now of doing a 408 with a Kenne Bell supercharger. I have a few cam choices laying around but wasn't sure which would be the best with boost.
@RacingRamFam
3 жыл бұрын
Mine look great with 200,000 miles! Any cane is a boost cam! Usually supercharger cams they try to make a lot of low end torque to spin the supercharger easier
@nawscawp
3 жыл бұрын
My cam bearings were toast when I went to do a cam swap, Motor had 130k on it. Budget went out the window at that point.
@sammiethompson457
7 ай бұрын
My first truck was a 97 ram sport that mf was fast but not knowing how to adjust the timing I ended up losing the truck 😢
@justt_a_catt2519
Жыл бұрын
Could I just get all the parts and then take it to a shop to have them install it? I don't trust myself doing it lol but I want a badass 5.2
@yutub561
2 жыл бұрын
You just made me re-thiink swapping my cam haha. Think stock cam will be enough for an e30 bmw?
@RacingRamFam
2 жыл бұрын
For what? What are you trying to do? Stock cam 90% of the time suck
@yutub561
2 жыл бұрын
@@RacingRamFam just have a nice street car
@user-nl2gz7wt2o
26 күн бұрын
What about a Comp Cam for a 5.7 Hemi 🤔🤔🤔🤔
@chrischappell7117
3 жыл бұрын
Great video guys. I have a 1998 Dodge Ram 1500 automatic that has over 200,000 miles and it is my only truck, a work truck. A friend has an old dual plenum intake that he says would help with the pulling power (I pull a 6000 pound work trailer) but not sure if that alone would help or if I would need more added to it. The truck struggles to pull the trailer up overpasses but it is my only truck and I don't need it to be super fast, just pull the trailer better so I guess some more horsepower. What do you guys recommend? Thank you.
@RacingRamFam
3 жыл бұрын
Dual plane won’t give you as much torque as the stock kegger. And go with a tune it really wakes these trucks up
@Joero21512
2 жыл бұрын
What tune do you recommend??
@Blaydrnnnr
3 жыл бұрын
I have that exact same cam and it doesnt sound ANYTHING like that....then again, mine isnt running twin turbos...
@RacingRamFam
3 жыл бұрын
Ya this is it running with no tune and low rpms
@davidheard898
3 жыл бұрын
It’s a pain to put in too hahaha
@RacingRamFam
3 жыл бұрын
Lol not to bad!
@davidheard898
3 жыл бұрын
@@RacingRamFam yeah most people can’t do it right I’ve seen some bad jobs 😂😂
@RacingRamFam
3 жыл бұрын
Lol 😂
@hectorcorrea8044
3 жыл бұрын
Where are you guys located I will pay for everything if you guys do it
@GalpaoV8
Жыл бұрын
this spring mopar perfomance need head machined??? you just assembly it with stock retainers?
@RacingRamFam
Жыл бұрын
Nope not with this amount of lift
@GalpaoV8
Жыл бұрын
@@RacingRamFam no coil bind ?
@rayalvarez4268
Жыл бұрын
Hey, I know this video is a year old, but if still like to try, can you guys point me in the direction of the timing chaing you guys got?
@khrisshultz2532
2 жыл бұрын
You forgot about torque converter...
@RacingRamFam
2 жыл бұрын
You don’t need a converter
@alainlajoie443
2 жыл бұрын
Hey do you guys run a stock bottom end? I just picked up a 2000 Dakota RT and I have a D1 procharger head unit I was gonna put on the 5.9 just wanted to know what you guys do to prep them for boost. Not looking to spend a crazy amount on this.
@RacingRamFam
2 жыл бұрын
Stock!
@alainlajoie443
2 жыл бұрын
@@RacingRamFam cool thx stock bottom end it is.
@BigBadJones
3 жыл бұрын
What would be the biggest camshaft I can use with a stock tune? Or am I going to actually spend money for a tuner sooner than I planned. Lol
@RacingRamFam
3 жыл бұрын
I would do a tuner before a cam. Stock tune is the softest thing ever lol watch my video how to tune a twin turbo beast on the channel. You will see how trash the factory tune is for power
@BigBadJones
3 жыл бұрын
I got a superchips tunner for $75 but it's limited on what I can do. I want a sct eventually. Just kinda my poor boy project truck / daily driver so I'm trying to keep it semi dependable while getting around 400 hp (or more) eventually.
@RacingRamFam
3 жыл бұрын
Ya sct works a lot better
@hectorcorrea8044
2 жыл бұрын
Is it possible or even worth doing just a cam swap with out having to do turbos ?
@RacingRamFam
2 жыл бұрын
Yes yes and yes 100+ horsepower right there stock cams in these engines are pewnie
@GalpaoV8
Жыл бұрын
hello how are you, I bought the spring valves mopar performance p4876062, but a cant find the retainers for this, do you know where can i to buy this? thanks
@RacingRamFam
Жыл бұрын
I just used stock retainers
@GalpaoV8
Жыл бұрын
I cant, because the top outside spring is small
@frigglebiscuit7484
3 жыл бұрын
think im gonna flat tappet swap my 5.2. roller cam stuff is waaaayyyy to expensive for me.
@RacingRamFam
3 жыл бұрын
Flat tappets don’t last. And if you don’t get spring tension just right it will eat the cam alive or be too soft.
@frigglebiscuit7484
3 жыл бұрын
@@RacingRamFam ive got plenty of experience with flat tappets and spring weight. CHEAP flat tappets and no zddp is why they dont last. besides, i could cam swap twice with a flat for what it costs to do a roller. plus, flat tappet stuff is lighter.
@lalosandoval749
3 жыл бұрын
When is the srt10 cost comin?????
@RacingRamFam
3 жыл бұрын
Soon if you want to see it 👀👀
@luckyaffpv343
4 ай бұрын
Why not 5.7 . Just wondering.
@nws_bear
3 жыл бұрын
I just got a 99 1500 5.2 L magnum and I don't know if I should do a turbo or a supercharger
@RacingRamFam
3 жыл бұрын
Want free power or driven power?
@LIL1DOPES
2 жыл бұрын
@@RacingRamFam what's the difference?
@RacingRamFam
2 жыл бұрын
@@LIL1DOPES belt driven vs exhaust driven
@janisziemelis6888
3 жыл бұрын
can you share Baby hauler hp gain chart
@RacingRamFam
3 жыл бұрын
It hasn’t been on the dyno yet
@RacingRamFam
3 жыл бұрын
Would you like a update video tho?
@hollywood_7027
3 жыл бұрын
Yo guys imma need more information I’m just now starting to build my Dakota again
@RacingRamFam
3 жыл бұрын
There videos on everything check the channel out
@Jwe12
7 ай бұрын
Could you run this build without turbos
@RacingRamFam
7 ай бұрын
Oh yes don’t need the headstuds and stuff tho if not turbo
@DMSLAME
3 жыл бұрын
been looking for a cam for my 5.2 for over a year now
@RacingRamFam
3 жыл бұрын
Ya hard to choose one!
@tjthackeray2480
Жыл бұрын
Great information! Does all of this apply to the 318's used in the Jeep ZJs?
@zanderfrench7005
Жыл бұрын
I’m 90% sure yes on that but never know of possible year and cam spec troubles but again should work
@nelsonsandovaljr7047
2 жыл бұрын
What cam do I get if I want to hear it chop but not be expensive and is there’s a kit I could get that does not need a tune? By the way I have a 1st gen Dakota with a 5.2l v8
@RacingRamFam
2 жыл бұрын
If you get a cam with any chip your going to need a tune cause it won’t idle with factory tune
@nelsonsandovaljr7047
2 жыл бұрын
@@RacingRamFam oh ok what cam do you prefer that would make it chop without breaking the bank and a tune?
@dckiller1129
Жыл бұрын
Could i use this in my 97 jeep 5.2 i wanna supercharge it but dont know what i need or where to get it
@coreyhickman9082
Жыл бұрын
Wanna cam and that’s about it she up around 160k
@jobehayes8444
7 ай бұрын
Are you guys close to Florida
@hectorcorrea8044
Жыл бұрын
Can you put a link to the heads studs ?
@alexisharo8865
2 жыл бұрын
For the cam did you have to get a torque converter stall ?
@RacingRamFam
2 жыл бұрын
Didn’t have too but was a pooch off the line
@alexisharo8865
2 жыл бұрын
Would you recommend it tho? I order a cam from hughe it’s a 208/214 -114
@RacingRamFam
2 жыл бұрын
@@alexisharo8865 ya that’s pretty small but good street cam
@alexisharo8865
2 жыл бұрын
@@RacingRamFam I shouldn’t need a mild stall than right ? Cause it’s a small cam right ?
@alexisharo8865
2 жыл бұрын
I’m just trying get that cam sound and do some bolt ons so that’s why I’m curious
@jamescopeland5358
Жыл бұрын
Cool
@Awsometurtle20
3 жыл бұрын
So are there different genrations of the 5.2 magnum im interested in a 89 dodge pick up and it got a 5.2 in it
@RacingRamFam
3 жыл бұрын
Yes that’s a la 5.2 different thank the magnum 5.2
@Awsometurtle20
3 жыл бұрын
@@RacingRamFam thank u for responding :)
@Moparornocar
3 жыл бұрын
Would I have to tune my ram if I cam it or will it self learn
@RacingRamFam
3 жыл бұрын
Matters the size cam. But factory tunes trash would go with a tune over cam swap to start with
@enriquemedina5769
2 жыл бұрын
How much it cost for me to you guys tunea my 5.9 Dakota rt magnum
@RacingRamFam
2 жыл бұрын
I have never tuned anyone’s stuff except my own
@alejandroescutia12
3 жыл бұрын
Did y’all use the stock rocker arms?
@RacingRamFam
3 жыл бұрын
Oh yes
@jadoncreamer7033
3 жыл бұрын
That isn’t too expensive if you think about and people still say ls is cheaper to turbo 😒
@RacingRamFam
3 жыл бұрын
You could do it cheaper than we did but ya magnums are cheap to turbo and make a bunch of power
@jadoncreamer7033
3 жыл бұрын
I’m just ready to see how the bottom hold tbh
@jadoncreamer7033
3 жыл бұрын
Magnums are torque monsters stock 318 has 330lb-ft of torque (1997)
@RacingRamFam
3 жыл бұрын
Ya me too I think we will split the block tho 🌶
@TheProchargedmopar
3 жыл бұрын
@@RacingRamFam Only way you gonna "split" the block is with butted ring or bad tune. That bad boy gonna take ALL the boost! Just no windows please. hahahaha
@vintagejoker5088
3 жыл бұрын
So your springs bind at .600? Thats a big cam lol
@vintagejoker5088
3 жыл бұрын
Also. Its only costed me a total of 1100$ to cam swap my 5.2 magnum with all felpro gaskets. 208/214 cam and spring upgrade kit. Head studs. High volume oil pump. I guess i got a little luckier than yall would have if yall wouldve had to buy it all lol
@jadoncreamer7033
3 жыл бұрын
He put multi layered steel head gaskets and arp head stead’s to handle boost so of course it’s gonna cost him more than you
@RacingRamFam
3 жыл бұрын
Ya you could do it cheaper but we used some high grade parts on this build!
@frigglebiscuit7484
3 жыл бұрын
the valve springs coil bind at .600 lift. that cam is nowhere near .600 lift.
@RacingRamFam
3 жыл бұрын
Frigglebiscuit .061” away...
@wyattcitizenzap4539
2 жыл бұрын
does the 5.7 just not exist to you guys?
@RacingRamFam
2 жыл бұрын
Huh we have a few 5.7 videos it will be back in a month for reassembly
@IgobyJayyy
Жыл бұрын
How much would u guys think a na 5.9 ram can make ?
@joshuaalexander1235
3 жыл бұрын
What do you guys think of doing this But with Holy sniper
@RacingRamFam
3 жыл бұрын
Do it! Another guy on Instagram has a turbo 5.9 with the sniper
@joshuaalexander1235
3 жыл бұрын
@@RacingRamFam I’m working on it slowly I got the 5.2 Magnum edelbrock intake that fits a carburetor just going to put holly sniper on it cam it push rods and Springs just taking a long time to find out all I need
@joshuaalexander1235
3 жыл бұрын
@@RacingRamFam gotta 99 dodge 5.2 4x4 Automatic just had the automatic rebuildet with high performance stuff get a receipts for all the stuff from the guy wanna turbo it gotta 5.7 dodge to 2003
@RacingRamFam
3 жыл бұрын
Nice!
@wyattcalton2438
3 жыл бұрын
or or hear me out dont touch anything leave it stock and only add 10 lbs of boost
@RacingRamFam
3 жыл бұрын
30lbs take it or leave it lol
@wyattcalton2438
3 жыл бұрын
@@RacingRamFam id love to put 30 lbs of boost in my 2004 5.7 magnum but it would probably explode... you guys got your shit together very nice work you guys do.
@wakeUPdummies
5 ай бұрын
I just watched a video that says that an la cam will interchange with a magnum.
@barneywarwick8745
3 жыл бұрын
What is a good cam for a 92 318
@RacingRamFam
3 жыл бұрын
Matters what your looking for
@alexisharo8865
3 жыл бұрын
Where did you get the camshaft
@alexisharo8865
3 жыл бұрын
Never mind found it
@ken-ul7kf
2 жыл бұрын
How much was the cam shaft
@RacingRamFam
2 жыл бұрын
$300
@cristinaportillo5806
2 жыл бұрын
Do these parts fit a 2002 5.9 dodge ram
@RacingRamFam
2 жыл бұрын
Yes sir!
@GeoTrashPanda
Жыл бұрын
So who bribed thier sister on the merch clip? LoL
@tylerlawson87
Жыл бұрын
Still not bad at 3000
@kyleschwalm4870
2 жыл бұрын
Did you use the stock rocker arms?
@RacingRamFam
2 жыл бұрын
Oh yes
@kyleschwalm4870
2 жыл бұрын
Do you think the stock rockers and pushrods would be ok to use with a .552/.549 lift cam?
@RacingRamFam
2 жыл бұрын
@@kyleschwalm4870 yes nothing wrong with stock rockers
@kyleschwalm4870
2 жыл бұрын
@@RacingRamFam sweet. That just saved me 700 bucks. Thank you sir
@rustynloud427
3 жыл бұрын
Does anyone have the link to the cam i cant find it
@RacingRamFam
3 жыл бұрын
Should be in the description
@rustynloud427
3 жыл бұрын
@@RacingRamFam idk man its not there for me ill try to find it again in a bit thank you though
@RacingRamFam
3 жыл бұрын
Alright let me know if it’s not I’ll add it
@rustynloud427
3 жыл бұрын
@@RacingRamFam its not there for me still if u could put it in their it would be greatly appreciated
@bigbud7356
3 жыл бұрын
So can I put a 318 crank in a 360 bottom end and run it as a 318 to put it on my nv3500
@RacingRamFam
3 жыл бұрын
Lol you would need the 360 pistons and you can run a nv3500 behind a 360
@jimmybare3026
3 жыл бұрын
Keep in mind the 318 is externally balanced and the 360 is internally balanced but I believe it can be done.
@coreywilliams3309
2 жыл бұрын
For all this you could have just Ls swap it 😂😂 jp
@RacingRamFam
2 жыл бұрын
Prob would have been 10x the work and double the money
Пікірлер: 252