hey!! sometimes we take these things apart and redo things to stop the rough idol, and lack of performance. I went through all these things with my gen 3 but it wound up being the transmission valve body...just food for thought...rough idol was fuel injector, but removing the heads and getting ported ones are the best option for a good 30 hp gains and similar trq.....good video man...thumbs up.......oh I took out the wheel well liner and accessed the lower bolts that way....real easy to get to that last bolt...removing the headers from down pipe is easier than taking it out of the heads....just because of breaking the bolts...
@AMONTE7
3 жыл бұрын
Yea I got everything out just fine. I appreciate the advice.
@originalgoonies7625
Жыл бұрын
Those last two bottom head cover bolts brought me. I’m loosing my mind over here. 2011 5.7. I’ll get ‘em 😂
@EvanSimon
Жыл бұрын
I went through the same thing 2 days ago, try to get the smalest rachet with a long 8mm socket and dont be afraid to move those wire harnesses around !
@JoshMartin-bq5ww
Жыл бұрын
What combination of wrench/extension/ swivels did you use to get the lower head bolts?
@AMONTE7
Ай бұрын
Are you asking brand? if so harbor freight
@redhandedreviews3482
3 жыл бұрын
if your piston is bad, you can do it from under the car.remove the oil pan and pump, expose the crank, then take the connecting rods off for that piston ,drop the piston down and replace it .....I seen it done by my dad and know it can be done.,....harder while under there but you wont need to remove the motor...
@AMONTE7
3 жыл бұрын
I know I did a totally rebuild so I know the motor will be good for a while.
@redhandedreviews3482
3 жыл бұрын
@@AMONTE7 awesome..im getting a creat motor, going to monster my old 5.7 one myself..somthing about the torque it has..just slams...good luck brother..take it to the limits..
@AMONTE7
3 жыл бұрын
@@redhandedreviews3482 thanks man you too I want to see yours when you are done.
@redhandedreviews3482
3 жыл бұрын
@@AMONTE7 absolutely
@mikemarsh4221
3 жыл бұрын
Did you drain the coolant from the block first? Or did it all fall out when you pulled the head?
@AMONTE7
3 жыл бұрын
I drained it but it was still some left
@TakisWRLD
3 жыл бұрын
What book are you using as a reference? It looks very detailed?
@AMONTE7
3 жыл бұрын
Haynes Manual
@TakisWRLD
3 жыл бұрын
@@AMONTE7 thank you!
@AMONTE7
3 жыл бұрын
@@TakisWRLD no problem
@15DurangoRT
7 ай бұрын
First off, you might want to get rid of the leaves.
@AMONTE7
7 ай бұрын
Taking off a head and you are worrying about leaves ?😂😂
@rafaelfuentes7572
3 жыл бұрын
I have an 07 Charger 5.7 I took the intake manifold off and next I'm on gonna replace the heads. I just hope the pistons are in good shape. Good job on your video bro.
@AMONTE7
3 жыл бұрын
Thanks bro and good luck
@rafaelfuentes7572
3 жыл бұрын
Well my charger needs a new crankshaft rod bearing spun and shaved the crankshaft down really bad. So that is why I have metallic shavings in my oil pan whole engine needs to come out. Just my luck.
@rafaelfuentes7572
3 жыл бұрын
Well my charger needs a new crankshaft rod bearing spun and shaved the crankshaft down really bad. So that is why I have metallic shavings in my oil pan whole engine needs to come out. Just my luck.
@AMONTE7
3 жыл бұрын
@@rafaelfuentes7572 damn that sucks good luck on the rebuild
@Realofficialdee
2 жыл бұрын
@@rafaelfuentes7572 did it make any noise before tearing it down ?
@rayzelito
8 ай бұрын
Do you have to take the plugs out if you just want to take the valve cover off?
@AMONTE7
8 ай бұрын
No just the ignition coils
@rayzelito
8 ай бұрын
Bet, I n appreciate that
@AMONTE7
8 ай бұрын
@@rayzelito no problem
@_DIRTe53
11 ай бұрын
Bro… speak up !!!! Lol
@AMONTE7
Ай бұрын
My fault bro
@TaneaNijayWinston
4 жыл бұрын
I know that’s right!!
@TaneaNijayWinston
4 жыл бұрын
I love you and your videos!!!
@ardellbuyckes4910
3 жыл бұрын
did you get it back together?
@ethanramirez6858
9 ай бұрын
The trick on the back passenger bolt by the firewall saved me soooo much time and effort. Big respect for that
@AMONTE7
8 ай бұрын
No problem
@greg3357
Жыл бұрын
Iv got a 2019 RT charger does the manifold have to be on the head when reinstalling ?
@AMONTE7
Жыл бұрын
It’s easier to put the exhaust manifold on the head before it goes back on if that’s what your asking
@MagikMan666
2 жыл бұрын
You made that shit look easy my guy!
@AMONTE7
2 жыл бұрын
Thanks
@curtisfitzpatrick5110
2 жыл бұрын
can't hear what they say . no help .
@kennethvtice
6 ай бұрын
How much are you paying this man for your subscription? If his video doesn’t help you, you can stop being a cheapskate and take it to a mechanic.
@LingoENT
Жыл бұрын
Fire video 💯 I learned something today 💯
@AMONTE7
Жыл бұрын
Thanks
@LingoENT
Жыл бұрын
@@AMONTE7 no problem ,thank you,I’ll be getting this car parked and getting my hands dirty again but it’ll be worth it
@LingoENT
Жыл бұрын
Damn time flys I’m trying to do the passenger today , I did the driver side yesterday
@jorgegonzalez1000
3 жыл бұрын
What tools did you use very helpful
@AMONTE7
3 жыл бұрын
Ratchet wrenches, Ratchets, Breaker bar, 3/8 impact wrench, a bunch of sockets, jack stands and a jack
Пікірлер: 51