IF YOU NEED A TRACTOR ATTACHMENT, THEN WE CAN HELP! WE SELL AND SHIP ALL OVER THE COUNTRY! VISIT www.goodworkstractors.com WANT TO SAVE MONEY? CHECK OUT THE GWT DISCOUNT CLUB! Use code GWT at any of the vendors below and you will save cold hard cash :) I will also get a commission for the sale, so it's a win-win-win! 5% OFF WITH CODE GWT AT 247PARTS.COM www.247parts.com 5% OFF WITH CODE GWT AT ITC QUICK ATTACH! itcquickattach.com 5% OFF WITH CODE GWT AT JU FAB WORKS! www.jufabworks.com 5% OFF WITH CODE GWT AT 511 DESIGNS (CUSTOM GRILLS): www.5elevendesignz.com 5% OFF WITH CODE GWT AT YARD GLIDER! www.yardglider.com 5% OFF WITH CODE GWT AT MUDD'S CUSTOMS! www.muddscustoms.com 5% OFF WITH CODE GWT ON TRACTOR FLOORMATS! www.tractormat.com 10% OFF WITH CODE GWT AT OUTBACK WRAP! www.outbackwrap.com 5% OFF WITH CODE GWT ON HYDRAULIC SAFETY! www.hoseendchamer.com 5% OFF WITH CODE GWT ON SELECT PRODUCTS AT SUMMIT HYDRAULICS! www.summit-hydraulics.com 5% OFF WITH CODE GWT AT LUBE SHUTTLE! www.lube-shuttle.us/store 5% OFF WITH CODE GWT ON PROTERO DUMP SYSTEMS! www.proteroinc.com 5% OFF WITH CODE GWT ON SWEEP-ALL SWEEPERS! www.sweep-all.com 5% OFF WITH CODE GWT AT MILLER TIRE! www.millertire.com 5% OFF WITH CODE GWT AT BIG TOOL RACK! http:www.bigtoolrack.com 5% OFF WITH CODE GWT AT HEAVY HITCH! www.heavyhitch.com *Discount codes cannot be combined with any other promotions, offers, or deals! **I choose to sell some products through 3rd parties instead of stocking items myself. Know that I will receive a commission if you choose to purchase through certain links. Thank you very much for your support! This video is for entertainment purposes only. Good Works Tractors (Good Works Lawn & Power, LLC) cannot be held responsible for content found in any video. Always reference your owners manuals, use extreme caution, and proceed at your own risk.
@donbrutcher4501
2 жыл бұрын
Most hated attachment. The one I need and don't have, yet!
@dfarmer_
2 жыл бұрын
Do you have good neighbors?
@donbrutcher4501
2 жыл бұрын
@@dfarmer_ The best. They mind their own business and leave me alone.
@dfarmer_
2 жыл бұрын
@@donbrutcher4501 That's good too. I was thinking maybe you have a neighbor that you could borrow that attachment from. We have great neighbors and help each other out.
@skyhawksailor8736
2 жыл бұрын
I worked on both my uncles' farms and we never had any problems connecting to their post hole diggers, because of the way they stored them. After getting done using the post hole digger we would go to where the attachments were stored and sink the post hole digger into the ground about half way up the auger. Pull the drive shaft, unhook the three points and drive off. Next time we needed it back up the tractor over the three points and lower the arms. Since the auger was ridged in the ground, the weight of the attachment points are being supported and as long as the PTO has not been attached we had the gearbox actually allow side to side movement to align them. Connect the three point and attach the PTO. Pull the auger up, shake it, move the loose dirt back into the hole and we were done.
@bryceg5709
Жыл бұрын
His farm was somewhere warm and not too clay heavy. Because a winter stuck in the ground like that here and your have clay hard stuck and not be able to pull it out. We did similar though just up under a tree and throw a chain over a low branch and sling the thing by the gear box.
@semorrison7082
2 жыл бұрын
You gave a tip some time ago that helped me out more than anything about attaching a rear PTO shaft. Shift the PTO lever away from the rear PTO slot and your spline spins freely. AMAZINGLY simple and effective.🚜
@bradtaulbee8620
2 жыл бұрын
Strap your post hole digger to a post makes super easy to store and mount
@ritterjon
2 жыл бұрын
💥 As time goes on I’m getting more and more tired of dealing with my mower deck. I think it’s time to get a dedicated zero turn. *Keep on tractoring!*
@markschmaus5580
2 жыл бұрын
That's what I have. A dedicated zero turn. Works perfectly!
@jimmcknight3021
2 жыл бұрын
Even my local Kubota dealer says it's better to go that route. True its another engine on a machine but I am glad I have JD lawn garden tractor to go with our Kubota compact tractor. Orange and Green make a great team for our property. Lol
@joshuaplacka8480
2 жыл бұрын
Made that decision 2 years ago. We will never go back, it took over an hour off our mowing time.
@alstruck8063
2 жыл бұрын
Did that last year, it's a dream come true.
@Formulabruce
2 жыл бұрын
Walker makes one that the mower deck flips up in front for cleaning and storage. Imagine a mower deck NOT rusting?
@williamthomas9463
2 жыл бұрын
“Telescopic Draft Links”. Most people who purchase compact tractors will have no clue what I’m talking about. They are available as an option on almost all “reputable” tractor brands but dealers don’t spec them (I assume to keep the price down) and buyers don’t know to ask. It makes hooking up 3point implements so much easier and eliminates the need for a quick-hitch and the compatibility issues associated with them.
@3sparewashers-lg3gf
6 ай бұрын
YES! Mine has them, older tractor made in the late 60s. Pull the pin, slide out the ball end, tap it onto the implement pin with a hammer, insert clevis pin, and then just back up when done, it locks itself. So much better.
@kencotton4645
2 жыл бұрын
They have loader mounted snow blowers
@PTC61
2 жыл бұрын
It always amazes me when people struggle attaching a pto. Slow down, understand how it works and it is about as easy as plugging into an electrical outlet. Adding complexity will never make it easier.
@GoodWorksTractors
2 жыл бұрын
One line of difficulty that is a pain even if you slow down is aligning the key on the shaft properly. If your attachment is too heavy to move and thus to turn its shaft to align, and if the tractor isn't aligned at the point where you parked it to attach, well that creates work.
@tacomas9602
2 жыл бұрын
@@GoodWorksTractors the biggest problem is the silly connectors where you have to pull the whole ring on the tractor side. The best ones are big button but 1000 rpm pto seems to be all new style
@michaelmactavish4445
2 жыл бұрын
yeah but i used to made from a rear mount pto attachments into a loader mount
@johngersna3263
2 жыл бұрын
When you're in your 70's with arthritis it can be a chore. I'll still do it and I'm not whining but sometimes it can be difficult.
@BarnyardEngineering
2 жыл бұрын
@@GoodWorksTractors but you still have to turn the PTO to engage the PTO Link device. Looks to me like 1/4 of a turn vs. 1/12 of a turn with a standard 6 spline PTO. When you turn the tractor off the PTO shaft will turn by hand, some will turn free, others 1/6 of a turn. One of those PTO wrenches seems like a much more sensible solution.
@johngersna3263
2 жыл бұрын
I had to make my landscape rake and box blade quick hitch compatible. I used extended draw pins and welded home built brackets for the top hook that are the same height on both attachments and my tiller which was already quick hitch compatible. This way I don't have to raise and lower the top hook. It's made this old man's life much easier.😊
@hughhead9079
2 жыл бұрын
Folks who hate their PTO hook up should invest in a simple bottle brush, mineral spirits and a rag to clean the splines to remove any grease clumps that form over winter, then re-grease it... Ironic that one of the original tractor "quick attach" items ISO 500 standard PTO connector is now seen as such a problem.
@andrewslagle1974
2 жыл бұрын
I agree if you cant slip the pto on the splines ,you should be now whare near a tractor!
@davedave672
2 жыл бұрын
After removing and reinstalling a loader & removing the backhoe on my Ford 8n (sold it all), my 1025r loader, backhoe, & mower deck are a breath of fresh air - nothing takes more than 10 minutes on or off & it's EASY. That Ford was a wonder of technology in it's time but we've come a LONG way since then.
@Curtis1824
2 жыл бұрын
I didn't want to mess with the mower deck. I went with a bigger tractor and separate zero turn. Backhoe can be a pain, but it's nice to have one on the farm!
@wolfpack4128
2 жыл бұрын
I was just about to say I bought a lawn tractor for mowing. When you look at the costs and the fact you keep the hours off your utility tractor it more than pays for itself.
@farmerfloyd7696
2 жыл бұрын
I got a kubota l2501 and a z251 zero turn. Was going to get a Tractor with mid pto but I’m very happy with my choice. And I have found out I made the right decision. I love both machines!
@neonnavajo
2 жыл бұрын
I find my post hole auger to be fairly easy to put on/take off. I just disassemble it- pull the pin and take the pto shaft and gearbox/auger off. Then pull the pin between the other two parts. It’s an easy one man job.
@blueboatone5653
2 жыл бұрын
I find your channel very entertaining and your honesty refreshing. The post hole digger becomes an easy 1 man job if you just disconnect the pieces. Remove the auger and the hoop that connects to the 3 point. Put the hoop on the 3 point arms first and lean it forward. Then put on the mast and hook up the PTO. The last step is to attach the auger. Easy peasy, but not super quick. Instead of a quick hitch, I use Pat's Easy Change. I have a mix of old and new attachments and most are not standardized. The Pat's system works with everything. No more having to remove the quick hitch when it won't match up.
@waynejones5239
2 жыл бұрын
I have a few older peices of equipment and I did some fab work to them now they work with the quik hitch
@thom71
2 жыл бұрын
Good Morning Courtney, I'm not sure, but you should send me a hydraulic flail mower to see how much of a pain it is to put on and off my tractor. Something quick hitch compatible that will fit my Massey GC-1720. I can report back. It will be a community service. I am right next door in Ontario.
@mgeren
2 жыл бұрын
I just received mine and connected it to make sure I set it up properly. Can confirm it’s a pain and most definitely NOT quick attach.
@alabamamotionpictureproduc6626
2 жыл бұрын
I made a stand for our post-hole digger (PD10) out of 4x4's and 2x4's. It's still not the easiest thing in the world to put on or remove from the tractor, but it at least makes it a one-man job. I think my fastest time was 15 minutes installing.
@StumpkillerCP
4 ай бұрын
Like the 9N owner you quoted my prior tractor was a 1956 Ford 640. EVERYTHING I do with my JD 1025R is a breeze and a pleasure by comparison. I have no issues with my SpeeCo quick hitch. I did add clevis pins to replace the top link hook bolts. Just needed some adjustments to the implements in two cases. I added a top-link wheel that I can reach from the operator station and hook-ups are slick and easy.
@tomoaktree4951
2 жыл бұрын
One thing that surprises me is that folks grease their PTO shaft couplings. Both the male and female ends. This may be fine when it's 80 degrees outside, but what happens when it's cold? Why not use a simple oil can with something like 10W-30 oil in it.
@Mcss-lu5hv
2 жыл бұрын
Sounds like this turned into “difficulty of hitching to an implement” instead of bad implements. Like the ones that are just not worth the money even after they are attached.
@onefelixedo
2 жыл бұрын
I missed the original survey, but I can't believe SICKLE BAR MOWER didn't make the list. That thing scares the hell out of me just stored on the yard. Let alone attaching and un-attaching.
@advil000
2 жыл бұрын
Front mount SSQA post hole digger. You can get them specifically for anemic flow rate compact tractors like 6-7gpm. Problem solved. They mount easy, pick up easy, hang straight, you can put down pressure on it, and it can REVERSE.
@addisonhoffman2549
2 жыл бұрын
Backhoes can be a challenge to hookup. Was wondering if the quick hitch comments were related to hooking up the quick hitch itself, such as after removing a backhoe to go back to 3pt implements. It can be challenging to attach a quick hitch frame to your 3pt arms when solo, just like a post hole digger.
@richardker5583
2 жыл бұрын
We had post hole digger. I set it on pallets and back up to it, made it easier to hook up. Back over and lift up to the arms. Pallets also kept it off of the dirt.
@fitch8363
Жыл бұрын
Compared to putting the manure loader on the Farmall M or Farmall 400 of my youth the farm, the compact tractor loaders of today are push pull click click. I was installing and removing the loader on the M and 400 when I was in seventh grade. Even worse with the 4 row cultivator attachments that bolted to the frame sides of the big row crop tractors. They were heavy, articulated, not self supporting and it felt like they were waiting to ambush me.
@gibblespascack1418
2 жыл бұрын
Your quick hitch is a unique device but it was bested by the Case Eagle Claw from the 60s. It is sad that equipment went backwards in design from that time.
@TheDuckofDoom.
Жыл бұрын
+1 Any rear mount blade (box or simple back blade), or similar ground engaging implement, that doesn't have trailing gauge wheels(set behind not to the sides). Without that trailing wheel and a slack toplink(eg chain) they loose 80% of their grading ability, every bump or hole the tractor front tire hits causes opposite swing in the back. Unless the operator is moving super slow and adjusting height for every bump it's super easy to setup a wavy washboard effect. It's the whole reason road graders have the blade in front of the rear wheels. Ideally rear mount graders and box blades would have something like a pintle hitch and two rear wheels, the three point could still be rigged to provide lift for transport or backing up while not interfering when lowered for use. This could easilly be extended into a small pulled belly scraper when substantial material needs to be moved a distance(much better than a box blade). Even more ideal is a mid mount blade like the old Farmall cubs and 140s had, but with an industry-standardized hitch. Of course the downside is this requires tractors designed for function over fashion. This mid mount is also ideal for cultivators/row-harrows and seeders. Also mowers of course but mainly beacause of maneuvering space.
@Outdoorsy368
11 ай бұрын
We hung the post hole digger from the rafters in the barn, relatively easy on/off!
@rp1645
2 жыл бұрын
Thank you for your knowledge on all this. Trial and what goes wrong. Yes I hated the pull out to side KABOTA mower deck. The rear baggers getting full to fast. I think if people would just keep the pins and bushings in a supply of NEW ones. Have spares. Fighting a old bushing just to use it till it dies. Is fighting yourself. Clean the holes. Pre check the fit. I noticed that your pictures showed putting on snow equipment out in cold. The metal is cold, your fingers are cold. Put on before it snows. Listen to weather report get ready before snow hits. I remember how nice it was getting into plow trucks all set to go out. Better than those 4 AM dark yards, trying to line up plow hitch. The supervisor mad because we were not out getting on roads, when super could have been more proactive and set up plows just during work hours. Putting a sander on a dump, sliding into place to hit those rear tail dump gates latches, there is no room for play. The hinged sanders ( leg free standing) get all corroded up and nothing works all frozen closed with corrosion. Just power wash off everything after finishing the job.grease fitting. A good one will have lots of zerts. I would water spray off Backhoe everytime I finished a job. Cleaned the dirt off on all joints. Clean off excess GREASE. The huge build up, of grease just attracks lots of DIRT. Makes it difficult to put a bushing in without a fight or pounding it out of shape.
@kylerayk
2 жыл бұрын
For the life of me, I can't figure out why people struggle so much with the PTO shaft hookup.
@earlyriser8998
2 жыл бұрын
Let me see....I have a bad back, I am old, my finger strength is not what it once was, it is hard to see the splines with all the darn safety covers, the ring type require three hands to lift, hold, and pull the ring back....and I don't have three hands, my attachments are all for 60+ HP so they are heavy and large, ......
@jarrets2292
2 жыл бұрын
Kyle, get back to work 🙂🙂 Jarret S👍👍
@kylerayk
2 жыл бұрын
@@jarrets2292 Hi Jarret, you get back to work yourself! 🤪
@kylerayk
2 жыл бұрын
@@earlyriser8998 If the Harmless Farmer can do it, we (you) can too. Look him up on YT and see how bad you got it.
@andrewslagle1974
2 жыл бұрын
@@earlyriser8998 Come on !
@makeiteasydiy5424
2 жыл бұрын
I want a front mount flail mower for my tractor! Any ideas on how to get one?
@zfotoguy71
2 жыл бұрын
I really dislike the "newer" style PTO rings. I grew up with the spring pins, though a pain in the ***, they are easier to put on compared to the rings that you have to push one ring, pull the other, then while pulling the ring towards you then push the PTO on the splines. Hate it! As for connecting post hole digger, I usually have no issue. I have a 6' x 12" auger. It lays on the ground (on a pallet). I back up and connect the two lower arms first, then the top. It's quite easy on the back and I can usually get it connected in a few minutes.
@marlinguidegun1657
2 жыл бұрын
A neighbor uses five tractors for haying, one for each task - all the same Ford model!
@offrodnolefmr7445
2 жыл бұрын
Mornin slim, my first video this morning also. I will go back and look at the “quick attach” video. It seems I always have to get off and make adjustments to anything I need to hook up. I’ve gotten used to leaving it adjusted to the implement I use the most. It’s not nearly as quick as I’ve seen in videos. Thanks for your channel. I usually watch it over coffee in the morning. Great job.
@Morpheen999
2 жыл бұрын
I leave my loader on so hooking up the mid mount mower is quite easy! Lift up the tractor, roll the mower under the front wheels of the tractor into position, and then hook it up.. Maybe takes 5 minutes
@FloridaDeere
2 жыл бұрын
Well, after watching the video, I'm just happy to have a JD 1 series. Loaders, decks and with my hydraulic top link, I really can't complain much at all. All of these go on and off pretty easily. Having said that, I don't attach blowers or backhoes, so maybe I just don't know how tough those are.🤷♂️
@davejohn255
2 жыл бұрын
Your right on including the backhoe...with a homemade BH dolly it takes a few minutes and no effort on and off...The 54" MMM deck is even easier. 2012 1026R
@philsmock4943
2 жыл бұрын
For me mounting the front end snowblower. Sometimes can be a pain. You have to install it in the correct order, driveshaft to tractor first then front bracket. Otherwise it wrong work and it's start over. From year to year I seem to always forget the order. I did finally write it down in my book. I like blowing snow looking forward and seeing what I'm doing with the blower. Thanks for taking the time to create a list.
@cwolff5119
2 жыл бұрын
There is an aftermarket parking stand for the JD bagger.
@scanadaze
2 жыл бұрын
The tractor I have now is an small 19hp. There are attachments I can get and have. I have the two bag mower clipping attachment. I wanted an 3 point. Then I went with an mulcher kit. Then the three point, ect. Works for me. I still need an bigger tractor. Some day.
@carltonbailey3498
2 жыл бұрын
I use my front-end loader so much I just never take it off, but hooking up most any three-point attachment, especially with PTO is usually a pain, especially by yourself! I have a backhoe attachment, its a real pain to put on!
@johnholtforth9081
Жыл бұрын
John Deere did a wonderful job on making my backhoe attach to my compact 4500. Was amazed how easy yet sturdy it is. One of the few times I have to praise engineers on the outcome of their work. Great job!
@VBCJesusSaves
Жыл бұрын
Pat's quick hitch adapters work great. Makes your current 3-point arms ready for action without limiting you to a fixed attachment width. If you have multiple attachments to work with that have differing widths, Pat's is the better alternative.
@matthewheld8577
2 жыл бұрын
So sometimes you gotta go tractor with a intermediate tractor that can handle multiple implants. Yes they are specific to its brand. That is Walker mowers. I have one I use in conjunction with my JD 5065E. I can run it with a 66” deck for regular mowing. In winter I can dedicate it to a snow blower because it’s pto driven. Has many other attachments. Greatest selling point family owned out of Colorado Also has a fantastic grass bagging system hydraulic operated. Takes away owner frustration.
@KateHikes1933
2 жыл бұрын
A powered auger must be a life-changer compared to doing it manually.
@angus4202
10 ай бұрын
my 9n has a trick shut the tractor off and dissengage the pto and you can spin it by hand with ease
@morganottlii2390
2 жыл бұрын
Hook up the hydraulics on 3pth backhoe 1st, and use the controls to help hook up 3pth arms
@YMF1891
2 жыл бұрын
I have seen comments saying that people thought quick hitches were overrated or just hype, and while I don't agree I can see how it wouldn't be as big of a help to some as others. I can't however understand how it could be someones least favorite attachment.
@fyrman9092
2 жыл бұрын
Having a JD 1025, I don't find switching attachments as cumbersome as other tractor brands
@NSNorfolk
2 жыл бұрын
Post Hole Auger. Get a little rust in the PTO shaft and get ready for frustration. We do have 2 diesel tractors, one set up with a grooming mower and te other for farm work.
@tractorboy31
2 жыл бұрын
I got a 57 JD 520 and no attatchment is a pain. I have telescoping pull arms and a toplink that is a hook and i dont really struggle. I put a nieghbors 3point backhoe and that was a challenge because everything was set for her kubota. I had my tractor digging out stump and friends husband was hauling brush with new holland and my friends (brother and sister) were using kubota to haul blocks of wood and guide remainder of trees after a bad storm so we had 3 tractors doing storm cleanup
@daddio7249
2 жыл бұрын
The first tractor I drove was one of my dad's JD 520s in 1959, I was 7.
@chaseledbetter5186
3 ай бұрын
As for post hole digger. I dig a deep enough hole where ever I'm taking off the implement and unhook. The hole will hold it up
@workingmanrondoyle3287
2 жыл бұрын
You nailed this video! 👍👍Keep em coming back for more!
@LarsDcCase
Жыл бұрын
I have a MF GC2309. The front end loader comes on and off very easy. Once one has the hookup installed for the front mount snow blower , it only takes a few minutes to remove the snow blower and re attach the FEL. A back mount snow blower that one has to drive through snow first to clear the snow, that has to be the dumbest idea I've ever seen. Try to drive through crusted 2 feet deep snow to clear it with the rear mount pull snow blower. Not going to happen. My personal ideal option is a rear mounted blade combined with the front mount snow blower or FEL, works very well. The rest of your video was informative.
@mossman7527
2 жыл бұрын
On the post hole digger I just take it apart part by part it stores really well that way and I can do it by myself putting it back on
@pedrorivera4191
2 жыл бұрын
I’m glad I’m not the only one that hates putting on the mower deck
@reno4819
2 жыл бұрын
I have a dedicated Zturn. Use to use my tractor but the zturn cut my mowing time from 2 hours to 1 hour and does a better job. I also remove the Zturn mower deck to use the zturn as a mule on tight trails. 4 clips and a belt and it's out. Just as easy to put it back on. I don't have trouble with my PTO. Keep it clean and lubricated. Hit it with WD40 and it works like a champ. For the post hole digger I use to break it down into 3 parts so it was easier to handle. Now I have a stand.
@gibblespascack1418
Жыл бұрын
For our 8N, the plow, harrows etc are fine. Back up, attach, adjust the 3rd point and go. (I wish that the 3 pt hitch was a Case Eagle claw, but you can't have everything.) The only thing that is horrible is the cutting bar. It is weight balanced when mounted, but you have to back over it, and straighten the tractor before you can pick it up, then it is so close that attaching the pto is more difficult because there is no place to stand. The rest is manually lowering and raising it. But when you need to do that job, it is always better than a horse and pull mower.
@goaheadmakeourdayscooterpe9644
2 жыл бұрын
Those 3pt arms for JD's are in the 2K range new (unbelievable) and only ever saw one aftermarket in the 600.00 range.
@jonniessink1
2 жыл бұрын
In my opinion, never owning a mid mount mower for a tractor. Keep the lawn cutting stuff to a lawn mower or if you still want to use the tractor either draw bar or rear 3 point style finish mower. If you have a front loader you should only have to take it off for doing maintenance/ repair on the engine otherwise leave it on. And I would say get the skid steer quick attach plate, for easier on/off and the attachments are almost endless with with whats available for skidsteers. And for last, the 3 point quick hitch is the way to go. ( coming from a former farm hand, working a 2,000 acre dairy fram in Central California) the problem is not to bad if properly maintained (greased). The biggest P in the A is the safety guard getting in the way of attaching to the tractor. And for the quick hitch. Of you have something not "compatible" make it compatible, even if fabrication is involved in the long run you'll be glad you did.
@thomasdaniel6495
Жыл бұрын
I had a John Deere 4030 that did not have the quick hitch to it,so I hated everything three point hitch.Luckily it was big enough that I could use pull type equipment.
@jamesyates5191
2 жыл бұрын
I agree with your earlier commenters that any time on my tractor is a fun day. I also agree with you Courtney that a separate mower is a wise investment since I already owned one.
@blainetoalston5945
2 жыл бұрын
Yes, The Mid Mount Mower (7 Iron) for My 3720 is a pain to Attach and Disconnect! But for the amount of land I mow. It sure does beat the the old Garden Tractor!
@mr.redneck2715
Жыл бұрын
FYI, just wanted to tell you why I think the JDQA is better than SSQA. First is the equipment is closer to the tractor on the JDQA. Second, I was pulling with a chain and had the bucket all the way forward and when I backed up to make the pull the bucket came off!! And yes the levers were down and it was locked properly! The third reason is it’s much less complicated and has to be cheaper to produce. It’s too bad the John Deere didn’t make it to the industry standard.
@marvindiamonjr.9631
2 жыл бұрын
I had a 1025r with a front mounted snow blower, a mower deck, and a backhoe. After having that for about seven years, I replaced it with a 3046r that has no front mounted snow blower, mower deck, or backhoe. I don't miss them at all. I'm not saying that they weren't useful, but I'm getting along fine without them. My most used implements are my basic bucket, snow pusher, and grapple. My back blade and landscape rake are following close behind. No pun intended. I've also got a 4 in 1 bucket and a box blade that have their applications, but not as frequently as the others.
@chaseledbetter5186
3 ай бұрын
On my dad's old ford 3910 you can cut the tractor off and the pto stub will spun freely. Super easy. On my tym subcompact you can literally shift the pto to neutral and it'll free spin
@stephenoverstreet9898
2 жыл бұрын
I bought a Cat 1 quick hitch a few days ago. Mounted right up to my tractor. But wouldn’t go on my used 6’ brush hog. Turns out it’s a Cat 2 brush hog, but with Cat 1 pins. It was so frustrating. I could understand why people would say the quick hitches are most frustrating, because if it doesn’t work with your attachments (which often outlive the tractor or are nonstandard for economy’s sake) or tractor then none of your intended attachments may work with it. That being said, I got an education out of it…
@larrycannady4601
2 жыл бұрын
I'm amazed at how hooking any pto up is complicated, wow.
@paularthurwebb7212
2 жыл бұрын
hay disc cutter, i disconnect mine with it setting on at least 6x6 blocks so the lifting arms will go low enough to reconnect when needed.
@alpine9996
2 күн бұрын
The BX Front Loader is the EASIEST thing to attach and detach of any implement.
@waynejones5239
2 жыл бұрын
I didn't think that I would like my John Deere quik attach system but I like it after I have used it very easy to use skid steer style get stuck if not used much
@fitch8363
Жыл бұрын
I bought a John Deere iMatch for my 770 when they first came out. None of my attachments including my John Deere brush cutter fit it. None. Not one. I spent a lot of time modifying the attachments to fit the iMatch. Once I got through the process of adapting the attachments (including my home made 800 lb counter weght) that iMatch has move to the top of my list of favorite additions to my tractor. My 770 came with a quick attach model 70 loader.
@stephenseiwert9672
2 жыл бұрын
I think the mid mount mower is the worst. I have a 72" drive over deck on my 2038r. Not because of installing and removing it, that's easy and takes almost no time but because when mowing the radiator gets full of grass clippings. especially when the grass is dry and the wind is blowing and the sun is shining and when the sun is not shining and on and on and on
@simpleman4196
2 жыл бұрын
Both of my Land pride quick hitches that I have had came with quick release pins My top hook is not bolted on however I would like to bolt mine on because I lose pins every once in a while in the top
@mikerequa820
2 жыл бұрын
Great video!! I tried two different quick hitches only have one quick hitch implement that's a 6ft. 2017 Mahindra box blade it hooked up perfectly but none of the rest of my implements. I had a post hole digger put in 200 post with it by myself was kinda aggravating but did the job was hard to store in dry but didn't really have that much problem with it. Thanks for sharing be safe have fun
@garycox7508
2 жыл бұрын
Hey Courtney, re: quick hitch "for reasons unknown"....the ASAE s278.6 spec doc (page 106 on the 1998 version) specifies the diameter and it is the same value for Cat1, Cat2, and Cat3. Ditto the upper hook opening diameter. Now, I don't know the reason for (and perhaps that's what you were actually musing about), but I can guess that a standardization of the openings was desired for maximum re-use of parts across the industry. Another reason might have been to reduce the stress in those mounting holes by increasing the radius (and thus both the surface area and volume of material related to bending/warping and resistance to propagation of micro-cracking) for durability reasons. I would imagine that they are designed principally with a pulling force in mind, and the extra radius provides a better geometry to handle the load of trying to stretch open the "hooks" in the longitudinal direction w.r.t. the tractor's axis of motion (imagine straightening out a fishhook by pulling sideways on the barbed end. The closer the fishhook is to a "vee" shape, the easier that becomes). That's just a guess, but from an engineering aspect I can see that as being a weak point they were trying to mitigate with that choice. I'll do some research later if I get bored and I'll update with any findings that bring further clarity.
@robertpayne2717
2 жыл бұрын
I remember years ago Woods Mowers were the go to in Mowers no matter what brand of tractor you owned i saw brand new IHC CUBS As Bs and Cs sold as brand new but, the buyers would buy a Woods Mower for them.
@farmerguy8579
2 жыл бұрын
I don’t think I could disagree with you. I hate hooking up PTOs! I always have problems hooking them up, such a pain. All other attachments just have their quirks and if you want to use them you deal with the pain if you want to use them. I’ve been wanting a PTO link for a while but they are so pricey I don’t know if I can justify buying one.
@charliej.2716
2 жыл бұрын
Please do a video on how to use the quick hitch. I have on for my MX6000 but cannot use it with the finish mower without the shaft hitting the underside of the quick hitch.
@HillsideAcres
2 жыл бұрын
I have to say the three point post digger is the worst. Getting it on can be a pain but the in our rocky soil sometimes a single hole is 10 shear bolts and finishing it off by hand. Went to hydraulic unit and will never go back. !
@redrussian76
2 жыл бұрын
I can't believe that the front mount snowblower made your list. Blowing snow out of our yard and off of our 1/4 mile long driveway is one of the main reasons we are buying a utility tractor. With a cab too! Kind of leaning towards orange also...
@GoodWorksTractors
2 жыл бұрын
Love a front mount blower. Hate the set up for it though!
@redrussian76
2 жыл бұрын
@@GoodWorksTractors our snowblower will stay on all Winter long. Thinking about running a box blade on the 3 point for breaking up some of the hard pack and for clearing snow also
@leroyroutly9758
2 жыл бұрын
On my BX2660 taking the deck on and off I back up on a 4 x 6 helps tremendously
@robertpayne2717
2 жыл бұрын
I never had a problem with my post hole digger. I could hook mine by myself took a little time but, it was it worth it.
@ryan3513
2 жыл бұрын
I added a slip clutch to the tractor side of my PTO to remove need for shear pins and also make up the gap from my 3-point quick hitch. Anyone who complains about a quick hitch is clearly using it wrong. Best thing I've bought for my tractor, hands down!
@crslyrn
2 жыл бұрын
I have to admit the 3 point quick hitch is one of my least favorite attachments I've had on my tractor. The Harbor Freight Category 1 quick hitch in my case. Now not because of not knowing how to properly use it but, I found that the variances in the older 3 point equipment that I have doesn't exactly match up to the quick hitch.
@circuitbreaker9001
2 жыл бұрын
That is why I went with Pats quick hitch. No issues with it. Check out Pats quick hitch
@churlburt8485
2 жыл бұрын
same story after buying equipment for 40 years.
@johnminyard1054
2 жыл бұрын
I live in a clay layer land an it grabs the auger very quick an your can’t get it out of the ground, never buy a auger.
@doghouse416
2 жыл бұрын
My Grampa used to say......."If you're having trouble with a PTO......put some hair on it"
@TunafishSmoothie
2 жыл бұрын
One of the attachments I had in mind when I purchased my 1025r 6 years ago was a posthole digger. I had and still have about 700 feet of split rail posts to replace, and more to install. Tractor Time with Tim put a post hole digger on his most hated list. Now it is on yours as well. I think I may just rent one of the 1-man post hole diggers from the local rental company. It's $100/day (or a weekend if you pick it up Friday), so I could get it done in a few weekends of hard work. As I get older renting is more appealing, but has the downside of making me kill myself getting as much done as I can during the rental window.
@williamrehberg2546
2 жыл бұрын
Just a FYI for ya...Lowes has been having the Earthquake One Man Auger on sale for $229 at least a couple times a year. I've got one with the 8" bit and though it definitely isn't "professional grade", it'll let you do it at your pace.
@KirtH27
2 жыл бұрын
Anytime I can do something on my tractor it's a great time! I even drive up and down the street looking for fire hydrants to clear out
@MustangsTrainsMowers
2 жыл бұрын
Those mini wheel rakes made for garden tractors are nearly worthless. My landlord bought one and he decided it was money wasted.
@jerryhammack1318
2 жыл бұрын
The standard post hole digger mounted on a new small kubota ! Pain!
@jessegooch9473
2 жыл бұрын
Maybe I’m naive because we use 5100GN….but don’t sub compact tractors or newer tractors have a 540-N-540E? Put the pto in N and it’s free spinning to make alignment simply for PTO shafts?
@Raul28153
2 жыл бұрын
I like the PTO shaft connector. I'd been considering building something very much like that for a while just for my Howard Selectatilth.
@donaldswett6210
2 жыл бұрын
Getting older and stiffer, hard to work rear mounted attachments and see whats going on. Would hope that more front mounted attachments be made, and tractor beefed up to handle stress and strain.
@kencotton4645
2 жыл бұрын
The problem I have with connecting the PTO is, at least on my John Deere, the PTO does free wheel. So trying to turn the PTO shaft on a heavier devices can be a challenge when trying to line it up with the shaft.
@daddio7249
2 жыл бұрын
Shift the pto selector lever to the mid mount pto or just in-between them. The rear shaft should then free wheel, at least my JD 1023E does.
@rocksandoil2241
Жыл бұрын
Agree - Cat 1 quick hitch is not usable on Cat 2 tractor - I have one of each. And virtually none of the things I use on the small tractor is easy with the quick hitch... I hate post hole diggers and I know a guy who broke his arm on one. It's usually a bloody mess as I have such thin skin. Bruised and battered. But the worst piece of equipment is a tedder. They are terrible on many levels - tires, PTOs, staying pinned, loosening arms, breaking teeth... terrible piece of equipment.
@theChiz
2 жыл бұрын
Buy a tractor for each attachment is an excellent idea. That's exactly what I do on Farming Simulator
@ricktanguay2310
2 жыл бұрын
The pto link locking pin should go in the opposite way to make it easier when you want to disconnect it.
@karvtek
2 жыл бұрын
I love my 3pt quick hitch for the 4 attachments I have but you do lose some lift height because it's further from the rear of the tractor. I did have to buy all of the bushings for each though. The one you sell would've been worth the cost comparison when you have to purchase the bushings for each. I didn't know about it then though. Maybe your other viewers will read this and it will help.
Пікірлер: 266