⚡️ WATCH NEXT 🛴 Varla Eagle One full review bit.ly/36ReR8Q 🛴 Varla Eagle One rugged clamp upgrade bit.ly/3zXe8PV 🛴 6 Maintenance Tips For Your Varla (Zero10x) bit.ly/3Boeks8
@stuwest5862
2 жыл бұрын
T-27 is a torx bit. Hex bits are allen wrenches.
@Movelectrics
2 жыл бұрын
@@stuwest5862 spot on! T27 torx ⚡️
@Aj-om4dt
Жыл бұрын
Hi dude loved your gripes about the Varla egal one, I’m trying to by one from Varla but they have said they are not shipping outside the states 😢 I live in Wales, how did you buy yours?? Thanks Adam
@Movelectrics
Жыл бұрын
Hi I’m in the EU. Here is that site eu.varlascooter.com/?sld=3
@Aj-om4dt
Жыл бұрын
I thought I heard an Irish accident.. they don’t have an option to ship to the UK 😤 I really want to buy one in time for Christmas 😢
@robertmwangi1493
3 жыл бұрын
Keep an eye on that small screw on the clamp it does get loss in time.
@Movelectrics
3 жыл бұрын
Thanks for sharing Robert!
@SegundaOfficial
2 жыл бұрын
there is a problem with my varla where there is a red exclamation point, brake lights flashing without me using the brakes, and throttle not working. I tried pumping the brakes and checking the wiring and nothing works, how can I fix this?
@Movelectrics
2 жыл бұрын
Sounds like a sensor issue perhaps. Join the Zero10x owners club FB group and ask there. They are very helpful!
@-thefalcon-
2 жыл бұрын
Definitely the sensor I had the same problem it's the wire above the brake line. Mine had dirt in it take out with small wrench 🔧 and clean.
@johnboy0008
2 жыл бұрын
Thanks for the tips, like the washer idea, but maybe go with black washers so,they don’t look cheap,or stand out…
@Movelectrics
2 жыл бұрын
Doesn’t bother me really to be honest but work perfect ⚡️
@AragonsterGamingHD
2 жыл бұрын
Got three for Christmas, two of them have a flat front tire after one use! Any recommendations on alternative tires or solutions, seems outrageous? Had checked the tire pressure was between recommended 40-50 psi as well because it was the first ride. Also one other them the brakes just straight up don't work, I'm pretty sure it needs to be bled because I see the hydrolics somewhat close, but not all the way. Some nails and parts came rusted and the screen that displays speed came with a chip in it:(... Very disappointed
@Movelectrics
2 жыл бұрын
Hi! The stock tyres are ok but it’s best to upgrade them. Link below. I have mine at 50psi and no issues. The surface rust you are talking about sounds like the hydraulic fluid, leaked, causing the brakes not to be effective. You should be able to replace the rusted screws easily. Or contact Varla and get them sent out. Best to bleed the brakes obviously. There is a kit you can buy for this on Amazon. Here are those tyres. Street, hybrid or full off-road. I have the street, but have not fitted them yet. Shop around for prices a.aliexpress.com/_mrxq9yU
@MrOrchardBeach
2 жыл бұрын
My right brake (under throttle) doesn’t work and this is just after the 2nd ride. Any tips on what I can do to adjust the brake?
@Movelectrics
2 жыл бұрын
Sounds like you need to bleed the brakes. Watch this video kzitem.info/news/bejne/ooKJqKuDpYJ8g2U
@MrOrchardBeach
2 жыл бұрын
@@Movelectrics Thank You!
@outlaw-vipex1600
3 жыл бұрын
Yeah about that... I have a monorim suspension installed and I accidentally stripped the bolt that makes the fender stable instead of it going up/down ;/... Update I am going to get a monorim back suspension ..
@Movelectrics
3 жыл бұрын
Hi! I’m sure you could get the bolt in a hardware store ⚡️
@idiot1jerk2face3
3 жыл бұрын
One MAJOR fix would be to get solid tires... I got two flats going 13 mph on the street in less than 100 miles of riding...
@Movelectrics
3 жыл бұрын
Solid tyres in my own experience are very bad depending on what type. Main thing is to keep your psi topped up to 50 ⚡️
@idiot1jerk2face3
2 жыл бұрын
@@Movelectrics They were...
@carpfinder9141
Жыл бұрын
i have 745 km on my mantis 10 and i havnt had a flat yet all i do is check my tyre pressure everytime i use it to make sure i can't get a pinch flat
@Aaqib2nice
Жыл бұрын
I have Eagle one pro Can you tell me how to lose break it’s to tight I just purchased recently I tried to follow Manual but I couldn’t figure out how to lose the breaks it’s so hard and stopped bike right away and it’s bit risky this why
@Movelectrics
Жыл бұрын
Hydraulic brakes on the Pro? You’ll need to bleed them until you are happy. I’ve not made a video on this yet but click here for further help kzitem.info/news/bejne/zKSKvJ2Zj5yFaqA
@woodworkerf355
2 жыл бұрын
Thanks for sharing 👍 😊 the tips!
@Movelectrics
2 жыл бұрын
No problem Craig!
@AVoidDances
Жыл бұрын
Better with the fenders removed completely. Makes it easier to clean and don't go thru much water and mud anyway. Upgraded post clamp looks better turned 180 degrees as well. Functions fine and I ride full tilt.
@Movelectrics
Жыл бұрын
Where i live. I need the fenders. Couple of washers where the screws are firms them up.
@Movelectrics
Жыл бұрын
I disagree but if you live in a dry country mostly, then no need. But for others, it’s essential. As for performance, a mudguard has nothing to do with it. That comes down to tyre pressure, hills, wind, weight, p-settings, temperature, stance and battery state.
@kwkong7129
Жыл бұрын
What’s difference between Varla eagle one and Zero 10x
@Movelectrics
Жыл бұрын
Exact same but different labels. Zero10x though comes in higher volts and Ah batteries.
@577buttfan
2 жыл бұрын
Little piece of Gorilla tape will protect the cable in that spot bro :) Do the regen brakes come on only when you pull the brake or when you release throttle??? i get nothing when I release throttle only???
@Movelectrics
2 жыл бұрын
Hi Jersey! I’ve since used Gorilla Tape and silicone. No issues. But my front controller did blow a while back so the scooter is down at the moment (made a video on that) Either releasing of the brake/throttle activates the regen. I have mine on level 2 p-setting from what I remember.
@dswartley100
Жыл бұрын
I think you have to turn on the regen in settings or you can at least adjust the regen settings
@577buttfan
Жыл бұрын
@@dswartley100 Mine only regens with brake deflection not throttle release.Going on 800 miles.
@MotoTrackSide
2 жыл бұрын
thanks! I had a speed wobble today around 40-50k. So it does need a damper.
@Movelectrics
2 жыл бұрын
Hi! I don’t get any wobbles myself but I think it’s definitely good to have in general. Check your tyre pressure just in case. I would definitely like the steering stiffer regardless. Stay safe man! 🤛🏻
@esotericeos4314
Жыл бұрын
It depends how stiff is your stearing. My came so hard that I cannot turn it with one hand in the middle. But I got used to it and ofcourse absolutely no wobble.
@fpvflyer4758
2 жыл бұрын
Hello my friend... I was watching your videos and just wanted to share that the helmet you're wearing is not rated for motorized vehicles. I know this because I bought, and returned, the same helmet. Indeed, it's a great helmet because it's light and has plenty of airflow, but it clearly says it's not rated for motorized vehicles. I just wanted to share that information with you in case you weren't aware. I was able to get a very good full face motorcycle helmet for far cheaper (that helmet you have is pretty expensive!). If you want me to share the link to the helmet I got, I'll be happy to do so.... I just didn't include it now because I didn't want to come across as pushing someone's product on your channel. I hope you don't mind me sharing this with you. As a fellow rider, just wanted to look out for you, and my heart is in the right place 😊
@Movelectrics
2 жыл бұрын
Hi man! The Bell helmet I use has MIPS (of course) plus breakaway screws, X-Static® and XT-2® Padding,. The general use is all-Mountain, downhill, MTB and free riding. It wasn’t expensive at all. These are popular because of the good visibility and they are light. Heavier helmets I don’t like because they can restrict your movements and the visibility ain’t good. Thanks for the comment however. I’m always upgrading my gear so I’m always looking out for new products. You are more than welcome to share your link ⚡️
@fpvflyer4758
2 жыл бұрын
@@Movelectrics Sounds good brother. Be safe and have fun!
@Movelectrics
2 жыл бұрын
@@fpvflyer4758 send the link man. I like to always check out new gear 🤛🏻
@Windward90292
2 жыл бұрын
I just received my new Eagle One and was upset to find there is a detent in the steering that causes the front wheel to pop into a straight ahead attitude. This is very annoying when trying to navigate at slow speeds because it keeps popping into this detent. Is this a standard feature why have I not seen one person mention it in any of the dozens of videos on this scooter? Also, is there anyway to disable it?
@Movelectrics
2 жыл бұрын
Hi Gary. This is perfectly normal. You will not notice it after a while. It's basically to keep the steering straight. It's helpful at driving high speeds
@Dnxza_
2 жыл бұрын
Where did you get a clear case for the Speedometer
@Movelectrics
2 жыл бұрын
Got it from Banggood but i think AliExpress have them now.
@jfox11000
2 жыл бұрын
I’ve went though 6 flat tires already and have had the Varla eagle one for 7 weeks so far :(
@Movelectrics
2 жыл бұрын
What pressure you have in them? Make sure that there is no sharp edges on the tyre also. Most people upgrade the tyres because the stock ones ain’t the best. Click here to look at tyre options a.aliexpress.com/_EyErsaP
@nl2071
2 жыл бұрын
Bent my Eagle One stem; any ideas about straightening it?
@Movelectrics
2 жыл бұрын
To be honest, best to replace. It would have created a weak point and would be dangerous. You can try Aliexpress for them. Macury store is quite popular ⚡️
@TimsElectric
3 жыл бұрын
fabulous video...washers...awesome idea :) :) don't be stripping the screws :) :)
@Movelectrics
3 жыл бұрын
It always the screws on these! 🛴
@liDanTheManil
2 жыл бұрын
I hear the fenders not good because water still hit your back is it true
@Movelectrics
2 жыл бұрын
This is true. All I did was use some gorilla tape as an extender. I have however just bought the correct extender, I will fit and see how that goes ⚡️
@liDanTheManil
2 жыл бұрын
@@Movelectrics can you let me know how it go asap because I'm debating on varla eagle one or the new Ariel Rider Kepler I'm real conflicted on which to get I live in Florida living setup is a second floor apartment and it rain 🌧 a lot here. So I need good fenders hopefully if it get caught by rain puddle it won't destroy my unit ?
@Movelectrics
2 жыл бұрын
My Eagle One is currently down at the moment with a blown controller. You could use Gorilla Tape as an extension.
@liDanTheManil
2 жыл бұрын
@@Movelectrics i don't understand when u mean extended with that tape ? Can you show a pic how it looks How did your controller stop working a unit failure or going overboard with the scooter...
@Movelectrics
2 жыл бұрын
Join my FB group and I can show you what I mean with the Gorilla Tape (linked below) Also this video explains what happened with the controller kzitem.info/news/bejne/0Ypjt42KqKR1hYI FB bit.ly/2NMeXIY
@Afritunez
3 жыл бұрын
Isnt the speed limit like 20 kmph where u live? Ive wanted 2 get it but where on earth can u drive these monsters really
@Movelectrics
3 жыл бұрын
I test the scooters on closed grounds ⚡️
@crossoutdude6769
Жыл бұрын
Y’all follow the laws?
@Movelectrics
Жыл бұрын
With these scooters, they are great for off-roading on private land.
@highwaymen1237
2 жыл бұрын
What did he say?
@Movelectrics
2 жыл бұрын
Hi What do you mean? If you can’t understand my accent, you can use the subtitles that may help
@timjoseph887
Жыл бұрын
Have to add washers to the fender and brake cables sticking out waiting to be cut by a tree or your own fender? This thing Costs more then $2200 and these issues show me they are way overpriced $$ glad I decided against one.
@Movelectrics
Жыл бұрын
Washer takes minutes to do and a simple cable tie just to stop them from being snagged. Easy job. By the way, this scooter is $1700 below. Not $2200.
@timjoseph887
Жыл бұрын
@@Movelectrics Thin discs that bend and brakes that have never worked well are not maintenance issues but QC issues
Пікірлер: 74