Have you ever worked with textured plastic parts? What is your experience? Leave your thoughts in the comments below. Follow Gordon on LinkedIn for great engineering and manufacturing tech updates and explainers - www.linkedin.com/in/gordon-styles-091b552/
@LuisJalix
2 жыл бұрын
I’m curious to know the standard names of the texture patterns showed at 4:03, can you let me know please? Thanks!
@anandpalsodkar1759
Ай бұрын
Thanks Gordon, Could you pl elaborate on different standards / types of surface finishes, textures followed by the industry 👍
@abhishekmahamune6030
3 ай бұрын
Thank you sir for such an informative video
@starrapid
3 ай бұрын
Thanks for watching L(
@pawelborowski6653
17 күн бұрын
Good one. Thanks!
@starrapid
6 күн бұрын
Thank you. We produce weekly videos on engineering and manufacturing topics. Make sure to subscribe to our channel and stay tuned :)
@BuildItAnyway
Жыл бұрын
Very educational. I always wondered how this was done.
@paulbaird1351
2 жыл бұрын
Love it! Quick and concise expert information. Thanks you Serious Engineers!
@starrapid
2 жыл бұрын
Thank you Paul. There's more to come. Stay tuned :)
@NorthernDiaries
3 жыл бұрын
Excellent 👌
@starrapid
3 жыл бұрын
Thank you :)
@pro-plastics908
3 жыл бұрын
Great video, very informative.
@starrapid
3 жыл бұрын
Thank you :)
@luizricardo-ub7yh
3 жыл бұрын
Me ajuda
@joseiten3647
3 жыл бұрын
I love that you actually take the constructive criticism you’re given here and on Reddit to improve your videos. Keep up the great work and always remember, constant improvement is the engineering philosophy.
@starrapid
3 жыл бұрын
As ardent followers of Kaizen, we absolutely agree with you. Thank you :)
@ayatotakema1194
2 жыл бұрын
they have a reddit? i couldent find it
@starrapid
3 ай бұрын
@@ayatotakema1194 Hi, we don't have a specialized reddit page. But sometimes we post on relevant sub reddits. Especially r/engineering
@naveenkushwaha6305
Жыл бұрын
nICE ONE!
@alansayin
2 жыл бұрын
What would be the best method to add texture on top of a mid sole to a sandal made of EVA?
@starrapid
2 жыл бұрын
You should put the texture into the aluminium mold that is used to make the EVA Midsole.
@alansayin
2 жыл бұрын
@@starrapid So the STL file I have of my sandal, I should get a 3D designer to add tread to it so that then the manufacturer can turn that into the mold? Even if the tread is very small?
@alansayin
2 жыл бұрын
@@starrapid also, do you guys do this? I’m looking to manufacture my own sandal out of EVA, are you guys located in the US?
@samueldavie1772
2 жыл бұрын
Where are you guys located?
@starrapid
2 жыл бұрын
Hi there, our factory is located in Zhongshan, China, and we have representatives in the US, UK, Australia, and Germany
@samueldavie1772
2 жыл бұрын
@@starrapid Awesome - thank you. I'm based in the US and have a new plastic product for the new year. I'll email you with details.
@starrapid
2 жыл бұрын
@@samueldavie1772 Fantastic. Looking forward to receiving those details!
@pawetrznadel7770
3 жыл бұрын
One of the best channels on YT. I always learn something new with each film. Great job, keep it up :)
@starrapid
3 жыл бұрын
Thank you for your support :)
@houariboumediane3536
10 ай бұрын
Hi, are MK lighters slip guard skin applied using surface texture on mold injection
@binaybhusanrana4129
6 ай бұрын
How can calculate draft angle of a grain depth in required percentage?
@mattgeiger9988
Жыл бұрын
As a technician that adds texture to molds, servicing the southeast. Please reply back if in need of service
@Technoboy928
Жыл бұрын
When is the texure applied? Is it before anti corrosion coating or after that?
@Hemang8
Жыл бұрын
how to achieve matte finish in the mold without any texture?
@gokiburi-chan4255
2 жыл бұрын
This guy is an amazing host!
@stevenliu2680
Жыл бұрын
Yeah, indeed. I knew him for many years.
@LaserItPro
Жыл бұрын
What spray masking do you recommend for chemical etching? (Not looking for tape options)
@mattgeiger9988
Жыл бұрын
Even if you use a spray mask you still have to tape it underneath, tape masking overall is cheaper and works about the same
@BrownMInc
3 жыл бұрын
Honestly, I'm excited for each new upload! Thanks again Gordon and Star Rapid team
@starrapid
3 жыл бұрын
Thank you for your kind words!
@AGGOUNE2020
2 жыл бұрын
Great video thank you, I am new in CNC machining, please can you tell me if I can make the texture by micro milling cutter?
@starrapid
2 жыл бұрын
We will reply to this soon.
@AGGOUNE2020
Жыл бұрын
@@starrapid thank you very much sir
@danielhertz7266
6 ай бұрын
Thank you for making this video
@starrapid
6 ай бұрын
Our pleasure :)
@is17pl05
3 жыл бұрын
i have a question. When samblasting a mold continuosly, it could damage the texture or increase the cavities in dimensions? I am sorry for my inglish. Thank so mouch
@pactex23
2 жыл бұрын
you are correct, but light pressure and a fine grit can be a great way to clean texture. .0002
@starrapid
2 жыл бұрын
Excellent. Thanks for the response.
@mattgeiger9988
Жыл бұрын
Sandblasting can damage a mold but only at high pressures and with the unskilled sandblaster. also using the right media aluminum oxide mixed with glass beads is standard
@vickeysmart9685
2 жыл бұрын
Sir blue pigment name sir iam in chennai sir
@starrapid
2 жыл бұрын
Hi. What blue pigment are you referring to? Can you point us to a time stamp?
@AdriankropkaW
3 жыл бұрын
What kind of acid to make graining ?
@pactex23
2 жыл бұрын
Ferric Chloride works well with most metals and is forgiving.
@starrapid
2 жыл бұрын
Thanks for the response :)
@sallas4u
3 жыл бұрын
Thank you !!
@starrapid
3 жыл бұрын
Thanks for watching :)
@cerberus333dog
2 жыл бұрын
once again. useful info!
@starrapid
2 жыл бұрын
Thank you :)
@luizricardo-ub7yh
3 жыл бұрын
Me ensina a fazer textura porfavor?
@starrapid
2 жыл бұрын
Hi. That's what this video is for. It tells you how we make textures in injection Molded parts. É para isso que serve este vídeo. Ele informa como fazemos texturas em peças moldadas por injeção.
@raymondsiu5337
Жыл бұрын
Extremely Useful to those who are new this craftmanship. Thanks.
Пікірлер: 62