This is awesome. Would you be able to provide a list of all the parts needed to make these mods? Are they all available from the Lego website?
@Brick_Fantasy
Жыл бұрын
Sure I will add a list to this comment later on today! If they are not available in the lego store I suggest checking bricklink
@Brick_Fantasy
Жыл бұрын
here you go! there are some very common pieces but the radar dishes are a little bit harder to get, they are not really necessairy. I used the names from bricklink but you can always ask if something isn't clear! 2x dark bluish grey 1x6 plate 2x dark bluish grey 1x8 plate 2x dark bluish grey 2x4 plate 2x lightsaber hilt (grey or black) 2x blue technic pin (Technic, Axle 1L with Pin with Friction Ridges) 2x Technic, Liftarm Thick 1 x 2 - Axle Hole 4x dark bluish grey 1x4 bricks 4x dark bluish grey 1x4 cheese slope (Slope 30 1 x 1 x 2/3) And if you used the shield stickers -> 2x black Dish 6 x 6 Inverted (Radar) Webbed - Type 2 (Underside Attachment Positions at 90 degrees)
@SmoothGuyTO
Жыл бұрын
@@Brick_Fantasy Thanks for this. I found all the parts. Can't wait for them to arrive so I can do the same mods as you.
@escada5218
9 ай бұрын
Why do you all hate the new helmet? It's the best mold yet for me, they can make more accurate prints for different armors and it looks awesome.
@Brick_Fantasy
9 ай бұрын
The old one is just nostalgic to me and is a bit smaller. But i'm starting to like the newer mold tho
@escada5218
9 ай бұрын
I guess people are just averse to some new things. Good to see it grew on you
@thanos1725
9 ай бұрын
for me personally, I like the printing on the new helmet, but it's just too big. I think it works for the 2012 version tho
@Brick_Fantasy
9 ай бұрын
@@thanos1725 True, the new one works for some suits. It's also cool to have some differences between the suits.
@sithkiller0954
5 ай бұрын
The NEW Avengers Minifigures looks so bad with the new printing . And the Helmet from Iron Man looks like he's been slapped in the Face 😂.
@supermiloguardian
7 ай бұрын
🛩🛩🛩🛩THIS WOULD LOOK BETTER IF IT WAS DARK BLUE WITH ORANGE WINDOWS, LIKE THE SET 76126✈✈✈✈
@Brick_Fantasy
7 ай бұрын
That world be really cool!
@nicksterdisneyandpixarclub
3 ай бұрын
I thought you were gonna change Thor’s hair to Old Luke Skywalker’s, because it looks more like his appearance in the first Avengers. No offense, your changes are great!
@Brick_Fantasy
3 ай бұрын
thanks, I did consider that option tho! but I use that hairpiece for "age of ultron" Thor
@chocostudios3218
11 ай бұрын
Here are my thoughts, The new Loki's scepter is more accurate than the older scepter. Also maybe use the newer and more accurate Bruce Banner minifigure from the new Hulkbuster set. Additionally that landing gears were a great idea, althought it downgraded the 3 wheeled rear landing gears which is quite more accurate in aircrafts. Other than that, the other modifications we're a big help, Thanks for doing this!
@Brick_Fantasy
11 ай бұрын
Thanks! And i don't the new hulkbuster yet, bit tired of hulkbusters haha
@thecavalry4
Жыл бұрын
If the issue is that the light blue doesn’t fit with SHIELD's style, shouldn’t you also swap out the windows? Not just the circle pieces under the wings.
@Brick_Fantasy
Жыл бұрын
Good point! But I mostly wanted to swap the blue color because it looked too much like repulsors and too advance. I also didn't have the windshield in a grey color but it probably looks even better!
@JackMurton
Ай бұрын
Final upgrade add a fire extinguisher you need Tap 1 x 1 and Brick 1 x 1 Round in red
@Brick_Fantasy
Ай бұрын
@@JackMurton how could I forget the iconic fire extinguisher!
@seaneva778
24 күн бұрын
For the propellers you can take two of the 2x2 plates with a pin on the bottom and some of the newer propellers from the Batman submarine and make some good ones
@Brick_Fantasy
14 күн бұрын
That would be great, thank you!
@Brick_Fantasy
14 күн бұрын
That would be great, thank you!
@rajivgovind5889
Жыл бұрын
Ned's leg printing black widow and the internet needs more werek
@AdrianPerez-bz1tr
Жыл бұрын
I dont want to use my mk 48 helmet for the fig and i think the new helmet works fine
@Brick_Fantasy
Жыл бұрын
Thats fine! No worries. Just my opinion
@Ian_Cinnamon
6 ай бұрын
I'm so glad to see the older iron man helment works on the new body. I haven't gotten the set yet but it sure was a worry because I don't like the new helments
@Brick_Fantasy
6 ай бұрын
I like the original ones more too!
@TheGenuineDWNUT
7 ай бұрын
I've done most of these upgrades except for Thor and Loki and the landing gear! As for Hawkeye, I got the one in the MCU Blindbag and just added him to the set. Need to get myself a Bruce Banner, though!!
@TonyStark-uu9us
Жыл бұрын
Good one on the lightsaber hilts ;)
@Brick_Fantasy
Жыл бұрын
Thank you!
@winterpurple4587
Жыл бұрын
Personally I think the changes you made weren't enough to yield any noticeable difference. I personally would not have known, like, if I saw that on the shelf. Seems more like tiny nitpicky things here and there. Though I understand the changes made a difference for you; it's owner, which is the most important thing at the end of the day. Cheers.
@Brick_Fantasy
Жыл бұрын
It's because this set is already near to perfect. But there were still a few things that bothered me. And I saw a lot of people complaining about the wheels and the 1x6 plate.
@additayadas8997
8 ай бұрын
The vid is awesome buddy! Loved it! I'm buying this set.. So this video will help me to recreate the set.. Thanks! 🤜🏻🤛🏻
Пікірлер: 40