Me, just finishing the first couple donut videos: Alright then.... *saved for later*
@traumwandeln
2 жыл бұрын
How did your donut went? Did you finish it?
@dygon7663
2 жыл бұрын
@@traumwandeln Yes, I did. Though in hindsight the donut tutorial really isn't the best for a beginner. It does a very good job at going over a lot that blender has to offer, problem is, imo, that as a beginner it's too much. I'd suggest checking out Grant Abbitt. He has loads of more beginner oriented tutorials, like the low poly well and sea shack tutorial that go over the very beginnings of Blender much better than the donut tutorial.
@jackcomas
2 жыл бұрын
Me: finish the barrel tutorial but still can't finish A SINGLE DONUT
@VictorBosich
Жыл бұрын
HAHHAHA S A M E here
@henrysneck2719
4 ай бұрын
OMG ME TOOOOOOO
@Shruti_Vijayakrishna
6 ай бұрын
I remember following this milk box tutorial ages ago, struggling with the line art but finally getting it to work. Now we have a whole line art modifier that can do it for us in a click! This method makes me feel nostalgic now, and appreciate just how far both the software and I myself have come :)
@levimagony
6 ай бұрын
We had line art modifier back then too. I still use this "old" method when I can, cause it looks so clean, I only use the line art modifier when the the other method creates ugly results.
@levimagony
Жыл бұрын
If something doesn't work, recalculate normals and apply scale. These two bad boys mess up everything if they aren't right. Glass edit: the tricky glass shader doesn't work anymore, it doesn't have this glowy bright look, it looks lame This fix doesn't work anymore but I leave it here just in case👇 (Glass fix: I checked my old file and the glass doesn't look as I show you here, probably bc blender has been updated since I published this video, and they've changed things. To recreate the effect, follow everything what I'm showing in the video but instead of setting the Transmission Roughness to 0.69 change the Roughness to 0.69 and it'll look just like mine. Change the blending from opaque to alpha blend.)
@cactus22minus1
11 ай бұрын
Big W for updating us in the comments! :)
@eduardmaterano2333
11 ай бұрын
Levi bro, You may not have 500k subs, but for sure you got loyal viewers, and one of them is right here 🔥, keep it up
@levimagony
11 ай бұрын
@@eduardmaterano2333 thank you 💜
@bravesonly
4 ай бұрын
Transmission tab in "Principal BSDF" has only "Weight" slider in 4.1 So many things have changed in less than one year
@kometan
Жыл бұрын
I was losing my mind trying to find a way to make objects in a transparent container with liquid visible in eevee, found this accidentally after I gave up on the project. I'm revisiting it now, it's going smoothly, life saving tutorial 🙏
@levimagony
Жыл бұрын
I was losing my mind too when I tried to make the Space Milk:D. Glad I could help!
@manusiabiasa200
Жыл бұрын
Same case here, still have some problem left tho. Hope the vids will be more detail
@eemFPS
7 ай бұрын
is this an evee render?
@matraellix
7 ай бұрын
yes@@eemFPS
@fbeeg
Ай бұрын
I've seen a bunch of people saying that this was too fast and hard to learn, and maybe it's just me, but I found this tutorial actually very good. I had almost no knowledge of blender when I first found this, and yes, it is annoying that the video is fast and a little too zoomed in, but it helps you find your way around the program while you're trying to find where those options are. (also, that's what the pause button is for!)
@levimagony
Ай бұрын
Thank you! Exactly, you can hit that pause button, and also this video is not made for beginners, it's made for people who are already using Blender and want to try out a different style, so it's more like an overview.
@fenrisarius
2 жыл бұрын
1:19 You forgot to tell, that if you need color to be applied, then add 1 to Material Offset in Wireframe modifier. I've struggled with this, so if anyone encountered this problem like I am, that this is your solution ^^
@levimagony
2 жыл бұрын
I did it differently, I duplicated the object, added a wireframe to it and deleted the materials and added a new one (purple). In this way you don't have to mess around with the material offset.
@fenrisarius
2 жыл бұрын
@@levimagony ooh, cool, I thought this was the way xd
@smthnew861
7 ай бұрын
dude. this is one of the best tutorials out there! no nascence! just straight to the point!
@levimagony
7 ай бұрын
Thanks💜
@morganalabeille5004
2 жыл бұрын
Man I tried tso so hard to get this to work then it turned out that all I had to do was recalculate the normals
@levimagony
2 жыл бұрын
Ah yeah, if something doesn't work always recalculate normals and apply scale. These two bad boys mess up everything if they aren't right.
@imfrager1404
2 жыл бұрын
my hero!
@a64719
Жыл бұрын
This comment was a lifesaver! This tutorial is really cool but I wasn't able to get it to work until I recalculated the normals.
@jamesbuksa728
5 ай бұрын
This is actually the cleanest and most concise way I’ve seen someone explain some of these techniques. Even explaining how to customize each one. Saving this video for future projects, fantastic job man
@levimagony
5 ай бұрын
Thank you, appreciate your comment✨
@Ritikulously
3 жыл бұрын
This was great and loved the little editing details
@levimagony
3 жыл бұрын
Glad you enjoyed it!
@humanharddrive1
Жыл бұрын
this style is so cool
@levimagony
Жыл бұрын
💜
@7tomidnight
3 жыл бұрын
This is amazing! Love the style and editing! I’ll be watching all your vids that come out!
@levimagony
3 жыл бұрын
Thank you 💜
@DrummClem
4 ай бұрын
As a science teacher wanted to make some educational animations, that will be pretty useful to me !
@gamertcell8425
Жыл бұрын
This is insane. Not just for 3D but for anything
@levimagony
Жыл бұрын
💜
@cardrabitt1159
2 жыл бұрын
This. These renders are Ian Hubert level mind meltingly good
@levimagony
2 жыл бұрын
Haha, thanks 😊
@HardMa5ter
5 ай бұрын
It's... beautiful. Thanks
@levimagony
5 ай бұрын
😉
@trigestigro4707
5 ай бұрын
The press the like button effect deserves a like
@kirangawas6050
Жыл бұрын
Dude, you are making great tutorials. Hope you keep making more. Love this art style and your presentation style. Keep it up dude🤩
@levimagony
Жыл бұрын
Thank you💜
@talgatospanov7283
3 жыл бұрын
Mindblowing how I learned so many tricks in just 3 minutes :D Easily liked and subscribed
@levimagony
3 жыл бұрын
Thank you so much.
@jurgenvantomme
2 жыл бұрын
Inspiring tutorials and your voice makes me feel relaxed
@levimagony
2 жыл бұрын
Thank you 💜
@bap3227
Жыл бұрын
THANK YOUU FINALLY A TUTORIAL WITH OUTLINES WITH TRANSPARENCY!!! im almost at the end now and i dont think my brain can handle this but still useful!!
@levimagony
Жыл бұрын
😄 you're welcome.
@g79ad36
6 ай бұрын
Man, this is exactly what I needed, thanks!
@levimagony
6 ай бұрын
Glad I could help!
@mutle
Жыл бұрын
What on Earth is this magic? I looove it!!!
@levimagony
Жыл бұрын
😄 thanks
@eno_one4106
2 жыл бұрын
"For the black color, I use output material" That's genius! I feel like an idiot for setting up emission and then set the color to black🤦♂️
@levimagony
2 жыл бұрын
Haha 😄, when I found out this I felt the same. On the other hand it doesn't feel right 😅.
@NiHard
Жыл бұрын
Magnificent
@levimagony
Жыл бұрын
💜
@levimagony
3 жыл бұрын
Which tip is your favourite one?
@marclapinff2709
3 жыл бұрын
all of them!!!! I just subscribed cant wait to see more cartoon tips¬
@levimagony
3 жыл бұрын
@@marclapinff2709 Thank you, there's more to come ;)
@a84334656
3 жыл бұрын
Probably all the jokes
@levimagony
3 жыл бұрын
Haha 😄
@alinerdelav
3 жыл бұрын
Damn this is gold. Any idea on how to get hand drawn like with texture.
@area2470
6 ай бұрын
So i just found Blender Final Boss!
@donni835
3 жыл бұрын
My 3D Skills are so weak, I couldn't understand this. Guess I'll bookmark it and come bock to it in the future.
@Poopstream
3 жыл бұрын
Thanks for the vid! Had already learned a lot from your streams, but this short summarize is a decent thing to rewind all the things!
@levimagony
3 жыл бұрын
Glad you enjoyed!
@ololorita
2 жыл бұрын
Great video!! Those last “bye bye bye….” 😍 My heart was broken 😅
@levimagony
2 жыл бұрын
😄
@aronkvh
Жыл бұрын
These techniques are really unique, I never come up with anything like this. Köszi szépen.
@levimagony
Жыл бұрын
I'm glad you like them. Szívesen 😉
@ndnzb
3 жыл бұрын
THIS HAS SOLVED ALL OF MY UNCOMMENTED QUESTIONS ON FEATURED SKETCHFAB MODELS. It's also so funny that when the subtle subscribe signs flashed i was liking the video and so hitting that button was super convenient! Brb slamming that notification bell.
@levimagony
3 жыл бұрын
Thank you! 😄
@northwind6199
3 жыл бұрын
Bro why is your voice so smooth, the blender tricks are _great_ but I think I'm also developing a crush lmao
@levimagony
3 жыл бұрын
I'm laughing out loud 😂 thank you 😄
@Polysthetic
3 жыл бұрын
Amazing effect. Thank you for sharing the method.
@levimagony
3 жыл бұрын
Thank you!
@PiddeBas
3 жыл бұрын
Editing king, for real, it's the little things
@levimagony
3 жыл бұрын
☺️ thank you so much
@shadowdemonaer
Жыл бұрын
This is so cool and I love the colors 💝
@levimagony
Жыл бұрын
Thanks
@n0rice4u39
Жыл бұрын
once again, yt algorithm has taken me to a wonderful place
@levimagony
Жыл бұрын
😌
@badbestgirl
2 жыл бұрын
EXACTLY WHAT I WAS LOOKING FOR, THANK YOU SO MUCH !!!!!!
@levimagony
2 жыл бұрын
You're welcome.
@heathery6396
10 ай бұрын
Amazing and adorable work and I've learned a lot. Thank you so much!
@levimagony
10 ай бұрын
Thanks for watching ✨
@angelblaak8533
Жыл бұрын
You are for real the best!!! Thank you💜
@Himax9
Жыл бұрын
...Are...? Are you a wizard? Because this is some wizard shit right here.
@levimagony
Жыл бұрын
🧙♂️
@iftekhar16
3 жыл бұрын
this is such a great video love it!!!
@levimagony
3 жыл бұрын
Thank you :)
@chocloretin
4 ай бұрын
Awesome tutorial, very funny
@bicyclemk2851
2 жыл бұрын
Didnt think I could find so many difficulties from the first 50 seconds of a tutorial
@levimagony
2 жыл бұрын
What's wrong?
@bicyclemk2851
2 жыл бұрын
@@levimagony I got everything working perfectly but sometimes I got to delete my object and make a new one because it would just go black when creating the border. Defo made sure I haven't accidently made anything wrong as by doing the same thing it would work. Idk it was weird I still don't get why I sometimes experience this stuff on blender.
@Satabol
3 жыл бұрын
I very excited!!! It is so cool!
@levimagony
3 жыл бұрын
Thank you.
@dinukachathurangashow8571
5 ай бұрын
u earned a subscriber. good job
@levimagony
5 ай бұрын
Thank you✨
@fl0killa
Жыл бұрын
beautiful funny and clear information, thank you so much for creating this videos!
@levimagony
Жыл бұрын
Thank you💜
@matraellix
7 ай бұрын
Hi, sorry to bother you, but i can't make the transparency, when i plug backface my bottle becomes completly white with no transparency. Did I miss something ? Thanks in advance for this cool tutorial !
@matraellix
7 ай бұрын
or completely black, i can't make anything work properly 😢
@levimagony
7 ай бұрын
You gotta switch from opaque to alpha blend in the material settings, i show this in the video maybe you've missed it. If it still doesn't work then open a fresh blend file and create the material on the default cube easier to find what's wrong.
@alexmattyou
3 жыл бұрын
Wow, the effect was cool and stylish. Thankyou for uploading this 🌟🌟
@levimagony
3 жыл бұрын
Glad you like it!
@earthrise2001
2 жыл бұрын
Alright! time to make some aesthetic stuff! Though I can't seem to do the gradient milk inside the carton, idk what I'm doing wrong tbh 🤣 EDIT: for the gradient milk, i just switched the emission node to connect at the top instead of the transparent bsdf.
@levimagony
2 жыл бұрын
yaay, tag me if you're done, I want to see it.
@farachainacitra6004
Жыл бұрын
how to make the milk transparent? mine didnt working
@lolila_da_taro
6 ай бұрын
Tries it again, works perfectly fine now, i wonder what do i miss in the first few time 🤔
@gunpringer2342
6 ай бұрын
same, strange, keep restarting and its getting better, even still not work, im sure i do what he do
@lolila_da_taro
5 ай бұрын
Done it again, not work gain D: ) I wonder what did i done wrong TOT@@gunpringer2342
@pixellegolas
3 жыл бұрын
Made a cube and a sphere inside. I cannot get the cube to show "inverted" so the sphere is never visible. I get the outline to work though. Following everything exactly. Just installed 2.93.3 LTS. Switched to eeve etc
@pixellegolas
3 жыл бұрын
Ah, the emission and transparency needs to be correct order in the mix shader. They cannot be in different order
@levimagony
3 жыл бұрын
I'm glad you've found the solution 😉
@leafjerky
6 ай бұрын
@@pixellegolas THANK YOU - i have been losing my hair trying to figure out what i was doing wrong
@anastasiashopine7808
3 жыл бұрын
thank you so much for these helpful tips!
@levimagony
3 жыл бұрын
I'm really glad you liked them.
@ZeekSuds
Жыл бұрын
awesome technique
@levimagony
Жыл бұрын
Thanks
@Hidroks
3 жыл бұрын
Great Video! Amazing tips and super funny! Love it!
@levimagony
3 жыл бұрын
Thank you for the kind words 💜
@daniloteixeiradiniz
2 жыл бұрын
Soo Cool!
@eyesburning
3 жыл бұрын
So cool! Thanks!
@levimagony
3 жыл бұрын
Thanks, I'm glad you like it!
@BlenderBob
3 жыл бұрын
Very cool! Thanks!
@levimagony
3 жыл бұрын
Thank you Bob.
@MegaNarutita
6 ай бұрын
Ok after seeing all this... Of course I subscribe! :0
@levimagony
6 ай бұрын
Thanks
@jenovaizquierdo
Жыл бұрын
Awesome video man, I thought there was a problem with your video and it was my iPad sound it was mute 🤣😂😂
@levimagony
Жыл бұрын
Thank you! 😄
@jenovaizquierdo
Жыл бұрын
@@levimagony is a pleasure, thank you for replying back. I’m subscribing to see more awesome tutorials from you 👍😁
@levimagony
Жыл бұрын
@@jenovaizquierdo Thanks💜
@jenovaizquierdo
Жыл бұрын
@@levimagony is a pleasure 👍😁
@jackseymour978
2 жыл бұрын
Epic tutorial! Couple of questions. 1) The white outline that you're acheiving in some of the thumbnails and your instagram animations - is that done in post or on a different render layer? Havent found a way to ouline the silhouette of a scene yet so would be great to know! 2) Have you tried this technique was many objects that have a lot of concave areas? I've found that the outlines can begin to look a bit wonky because of all the geometry intersections that are happening. Interest to hear your thoughts! Thanks!
@levimagony
2 жыл бұрын
1. I'm creating those outlines in photoshop, but here's a tutorial about creating multiple outlines: kzitem.info/news/bejne/tn5ns4J_h594fXo 2. yes this techniques is not always the best option, there's a lineart modifier in blender which works with concave areas and intersections as well ( i used it to create the outlines for the cassette animation). You can apply outlines to a whole collection of object or only the selected object: kzitem.info/news/bejne/wmelxYtqkXynho4
@jackseymour978
2 жыл бұрын
@@levimagony Amazing, thanks for those! Keep up the great work!
@Cadknowledge
3 жыл бұрын
awesome video man waiting for more video
@levimagony
3 жыл бұрын
Thank you, stay tuned for the next one.
@matters_web3
Жыл бұрын
insane, used some tips for my project
@spaceshapers-the3dprinting981
2 жыл бұрын
Found this on Reddit. Had to check it out
@levimagony
2 жыл бұрын
Thank you for passing by.
@SackLexaRus
Жыл бұрын
Very cool tricks!
@jecosci
3 жыл бұрын
this is amazing! good job!
@levimagony
3 жыл бұрын
Thank you so much!
@inventify_club
3 жыл бұрын
thanks for all the tips
@levimagony
3 жыл бұрын
You are welcome!
@mygames545
2 жыл бұрын
MAPPA Studio Taking notes XD
@nonprofet
4 ай бұрын
soooo good ! !
@miafei
Жыл бұрын
Your channel is just what I was looking for! Thank you! I'll do this tomorrow, just kinda wondering how I'm gonna add the planets...😅
@levimagony
Жыл бұрын
I'm glad you've found me. About the planets, add a sphere, use a scaled down + distorted wave texture with zero detail (if im remember correctly), color it with a color ramp which is set to constant interpolation this way the colors won't have fading. For the ring add a torus give it an outline.😉
@itzderpdoodle6937
3 жыл бұрын
THIS IS SO GOOD AAHHHHHHHHHHHHHHH THANK YOUUU!!
@levimagony
3 жыл бұрын
YOU'RE WELCOME !! 😀
@PeterWoller
2 жыл бұрын
Watch this every day before go to bed
@levimagony
2 жыл бұрын
Thanks for the medical prescription Dr. Péter Woller
@PeterWoller
2 жыл бұрын
@@levimagony anytime, anywhere just call me if you need advice.
@levimagony
2 жыл бұрын
@@PeterWoller sure I'll definitely call you
@einsamerkeks5977
10 ай бұрын
This tutorial is exactly what I needed ! Perfect and entertaining also! A little bit to fast for total beginners but I almost got it. My Glas reflection is transparent but I can't see the liquid through it. Do you know why that could be?
@levimagony
10 ай бұрын
set the blending mode of the reflection alpha blend in the material settings, and set the glass and liquid to alpha clip
@einsamerkeks5977
10 ай бұрын
@@levimagony Hey! Thank you! I deleted my file accidentely but seeing your answer gave me enough courage to try it again and this time I can see the liquid inside the bottle! Thank you very much :> ! Buut I somehow did something else wrong this time. I cannot see the reflection
@einsamerkeks5977
10 ай бұрын
OH wait. I can see my bootle. I have a different problem. My meshes are pink and I googled it. For some reason Blender lost the files, or something and I am trying to fix it now! Edit: Nvm. I fixed it but my reflection is still not visible :(
@levimagony
10 ай бұрын
@@einsamerkeks5977 try to scale up the reflection mesh a bit till it's on top of the glass
@einsamerkeks5977
10 ай бұрын
@@levimagonyOh I can see the reflection now but it is very ugly. :
@franksuarez6398
3 ай бұрын
We need a complete tutorial for beginners 😢🙏🏾
@lolila_da_taro
2 ай бұрын
Do u want help
@dickolas5510
2 жыл бұрын
Jesus, people are making these in Blender. Holy!
@levimagony
2 жыл бұрын
it seems so :D
@bastiwen
3 жыл бұрын
I don't know why but the Swedish google translate *_Tricky glass shader_* made me laugh.
@levimagony
3 жыл бұрын
I also really like that, she's full of joy :D
@lucasmatias2851
Жыл бұрын
I'm having trouble creating the glass, my question is, do I need to create a new material when making the glass?
@levimagony
Жыл бұрын
Check my pinned comment, hopefully that'll help.
@FischlpHD
2 жыл бұрын
amazing, ty soo much
@levimagony
2 жыл бұрын
Thanks for watching 💜
@lolila_da_taro
8 ай бұрын
The outline part is normal tho, it work :D
@ccz7408
2 жыл бұрын
Amazing video!!!
@levimagony
2 жыл бұрын
Thanks! ! !
@steevieartfeed
2 жыл бұрын
just found my new hero! subscribed hard Af haha
@levimagony
2 жыл бұрын
Haha, thanks 💜
@yunal.5172
7 ай бұрын
Thank you for the video! I have a question about the magic transparancy part. I used it on a sphere to show a smaller one inside. But the light can't seem to go trough the first sphere with the magic transparancy and affect the smaller one. Is it normal?
@randommshitt
7 ай бұрын
set the shadow mode of the big sphere to none under settings in the material tab, it's under the blend mode
@tkh9850
2 жыл бұрын
Hi! I like your videos. Thanks you! But i don't understand how to make milk. I created the object for milk then i made the only the shaders that appeared in 1:05. But the milk is not transperent, also gradient don't work properly. In your video one color flows in the other smoothly, but my gradient worked only on small space of milk. I hope I wrote clearly. Thank you for your videos again!
@levimagony
2 жыл бұрын
Create the same magic transparency material as I showed in the first step there's a node setup for the milk at 0:35, copy that. At 1:05 that's the material of the outline. If the milk is not transparent, go to edit mode, recalculate normals with shift+n, and it should work.
@i_am_a_real_cat1443
2 жыл бұрын
awesome bro
@kuddlecat
7 ай бұрын
hi! i attemped this tutorial on my own by making a frog inside a bottle, everything is looking perfect in the viewport but as soon as i hit render the things inside the bottle like the frog turns out gray/black or are completely invisible. already attempted hitting the backface culling box but nothing changes and i have no idea what else to do
@levimagony
7 ай бұрын
maybe you have an object in the scene which is hidden in the viewport but shows up on renders, check the outliner
@Ukiyxe
4 ай бұрын
when i delete vertices on the secondary outline step it deletes the whole object...how do I fix this?
@levimagony
4 ай бұрын
Delete the faces instead
@TheOutsider197
4 ай бұрын
awesome vid! im using this to create my yt mascot and it really helped! would you happen to remember where you got the planets and stars in the bottle?
@levimagony
4 ай бұрын
thanks! I made them myself, there's an addon called extra objects which gives you bunch of new objects including a simple star. The planets are spheres and I applied a wave texture to them.
@basiccomponents
2 жыл бұрын
This is amazing, thank you!
@levimagony
2 жыл бұрын
😉
@basiccomponents
2 жыл бұрын
@@levimagony it gives me a bit of a problem when I intersect two objects, it's like if there is a space between the outline and it's object, do you know I could fix this? ps. I removed the nodes for the trasparency because I only wanted the outline
@levimagony
2 жыл бұрын
because there's a space in between, this is how it works, if you don't want that there's an other technique it puts the outline on the object after the render (like a post processing effect), it's called freestyle
@reemtoghouj
8 ай бұрын
Thank you for the video, I tried to create the magic transparency but it doesn't work :( and I still don't know why
@carrotcake7564
6 ай бұрын
fr it's dope like wtf I wanna do it XD
@goku_dunker_420
2 жыл бұрын
I was wondering, is there any video out there you would suggest using for learning every single node? Because as a noob to Blender there are so many different sections of the program to learn, but the most complex one imo is nodes. It's like coding, and although I used to code I sucked at it lol
@levimagony
2 жыл бұрын
I would rather suggest you to search for a specific material you need and you will learn a ton of stuff, other day comes you need an other materiel you do this again, and in this way you know what the nodes do, but if you want an overview of every single node then here is a good video from Daniel Krafft: kzitem.info/news/bejne/xIdm16iZjKued34
@xrkatej2148
Жыл бұрын
CooooL! Thank you!
@thedevil9442
Жыл бұрын
Is there any alternative for the secondary outline? wireframe gets messy when the shape is more complicated than basic shapes. and line art modifier doesn't work on lines hidden by objects with this transparency method.
@levimagony
Жыл бұрын
Yes, delete the edges where you don't want outlines and convert it to curves and add thickness to them or apply a skin modifier. As far as I know there's not an easy, one click solution. Maybe freestyle but I'm not sure if that works if the object is hidden.
@alex.artechtattoo
2 жыл бұрын
Very glad to find your channel, MAN! Thank you so much for your art. Can you tell how you scaled and made pattern of procedural stars ?
@levimagony
2 жыл бұрын
postimg.cc/47BNc1fn scale down the plane in edit mode
@SilentJheck
Жыл бұрын
I'm unable to render the magic transparency one, in viewport it works but when rendering it shows as solid with no backface culling, tried to render my animation multiple times but can't find a solution, is there something to do for this?
@levimagony
Жыл бұрын
are you using eevee? I would suggest to open a new clean blender file and make the whole thing from the ground up following the video.
@SilentJheck
Жыл бұрын
@@levimagony yes I'm on eevee, but alright, I'll try again I guess
@levimagony
Жыл бұрын
@@SilentJheck if it's no working let me know
@SilentJheck
Жыл бұрын
@@levimagony all good, works now, apparently had some problems with some modifiers. Last question, how do you render your scene with almost no shadows? Is there any video technique for this?
@levimagony
Жыл бұрын
@@SilentJheck yaay. So in the material settings tab where you click backface, culling under that there's blend mode and shadow mode, change the shadow mode from opaque to none and there you have it, no shadows😉
@beaukromberg8011
3 жыл бұрын
This is all so simple and powerful. I love it. I'm curious how you're billboarding the planes though. Stars remain front facing while rotating.
@beaukromberg8011
3 жыл бұрын
Oh, I guess at the end you mention geometry nodes, which is what I figured. Still need to dig into those.
@levimagony
3 жыл бұрын
Thanks, maybe I will make a quick tutorial on that.
@vazak11
Жыл бұрын
Cool!
@granav5240
3 жыл бұрын
who are you? The Lord of Blender???
@levimagony
3 жыл бұрын
Haha 😄
@user-hk8ps6mz7o
2 жыл бұрын
WOW/ thats perfect!~
@benjaminpadernoz1913
3 жыл бұрын
Love your little jokes "All dead, I'm Finally Alone" ♥
Пікірлер: 471