Thanks for sharing. Some of the things I wish I did different before I bought my TJ was.... Take your time shopping. Go with a inline 6 rather than a inline 4. Make sure it has a AC. Go with a hard top rather than a soft top. Go with full doors rather than half doors. To upgrade to these needs will cost a lot later on.
@OFFROADSLuTZ
Жыл бұрын
The first thing I removed was the AC system. Mud and water do bad things too those clutches, I didn’t want to be “that guy” blowing a belt in the middle of the backcountry and then having to perform the delete anyway.
@JeepTeriyaki
2 жыл бұрын
If you do a rear drum to disk conversion like I did for my 05 TJ the 4.5X5 15 inch rims the brakes seem to be fine with 37s for me and has been for years but with rear drums it was a bit weak braking. Both axles are Dana 44s. Running offset steel rims, canned the spacers. But yeah rear disk conversion was a massive help with 37s and 15 inch rims i prefer more side wall personally! I'm also up in Maine and not desert running all day in extremely hot areas where it causes extra heat on your braking system. Great vid it randomly popped up. TY for sharing. Decent looking build!! Nice!!
@jerryschuler6864
5 жыл бұрын
Metalcloak does make them in aluminum now, but if you look up the weight, the Metalcloak fenders in steel are actually lighter than the stock ones you took off of the TJ so you did save some weight overall. I believe it's only around 3-5 pounds difference than the stock ones. I love the video, a lot of great insight and advice.
@bulletproofdirtworx4030
5 жыл бұрын
Jerry Schuler thanks for the comment, really like the extra up-travel they give. Plus more clearance at the rear so the tires don’t rub
@jimmyvalhalla1939
3 жыл бұрын
1. Angry grill 2. Ghetto ass wheels over 17” 3. Light bar before locker
@bulletproofdirtworx4030
3 жыл бұрын
No doubt
@davidmilesbrownii
3 жыл бұрын
Wow I'm so happy to find this channel. I just bought a stock TJ and found a wealth of information here. Thank you
@bulletproofdirtworx4030
3 жыл бұрын
You bet, enjoy, TJ,S are great
@jeremy8715
3 жыл бұрын
My thought had been to keep the heavy components at or below the frame and the lightweight components at or above the frame.
@bulletproofdirtworx4030
3 жыл бұрын
That is exactly the way to build
@davidrandall9964
2 жыл бұрын
I love my TJ. Your video has reminded me that I don’t do work on my Jeep for it to be perfect. I work on it because it’s fun and even the mistakes are a work of art. There are not many vehicles aside from TJ and it’s derivatives on which the unskilled person can actually do DIY work effectively. And the other upside is I get more looks and comments than the guys I know driving new Porsche 911’s.
@bulletproofdirtworx4030
2 жыл бұрын
Thanks for the comments 👍. So true
@thelonewrangler1008
2 жыл бұрын
Ive owned 4 different TJs over the last 22 yrs and I still found much of this vid to be helpful although I did make the same message you did with the " power adders". In my mind the only reliable horsepower to be added to this rock solid motor is to increase the displacement and anyone thinking about stuffing a turbo under the hood so they can crawl through the woods..... Don't do it! Turbos are for race cars and rice rockets🤷
@zeropointenergy1574
2 жыл бұрын
You're conveying wisdom. I just swapped to a 62mm TB. Because of your video I'm stopping there. Big thanks for the education about wasting money on illusory gains.
@bulletproofdirtworx4030
2 жыл бұрын
Thanks I think I’m gonna do a stroker motor in mine. Try and keep it smog legal in CA (legal enough to pass without getting caught anyway), get 40-50 hp the old fashioned way
@bugoutjeep8065
9 ай бұрын
Torque is what you want for off-roading and maintaining speed on the highway. Torque in a useful rpm range is the problem in all US jeeps. IMO either get a 4 cylinder and do a v8 or diesel swap (by far my preference but it depends how much you like using the skinny pedal and refueling) or stay with the inline 6 and regear/axles and stay 35s or less. Forced induction is for diesel and race vehicles. The wheelbase is another issue too and more reason to run smaller tires. TJs are much easier to deal with running 33s or smaller though and regear before looking for hp. HP is for race vehicles and tractors where rpms are always going to stay in a small window. All the hp mods don’t give enough low rpm torque to matter for general driving.
@hoppermantis7615
Жыл бұрын
Except for the 4 hole injector & heat shielding. Anything for the 4.0. I6 Im only having NEWCOMER RACING touch it.
@3smoke
3 жыл бұрын
I think the biggest mistake is you need to decide what you are going to do with the Jeep and build it for that. I built my Jeep to be a capable trail Jeep with trails like John Bull and the Rubicon as the upper limit. So 3.5" lift, air lockers, 35" tires max, Cage and metal cloak fenders. If I go beyond that, then I'll buy a dedicated crawler.
@t27buck
Жыл бұрын
Does anyone know what rear axle he is talking about having trouble with for the rear? I’m looking at a currie hp Dana 60 rear but now he’s got me wondering….
@lindeleasley
2 жыл бұрын
Black Magic Big Brakes seem to fine with my 15" wheels on the stock bolt pattern with the tires I run. I can lock them up at speed if I need/want to. The engine and drivetrain are stock, with the exception of a motor mount lift to go with the body lift and 3.5" Game Changer lift. Short arms are also working fine.
@Godsfavorite4.0
3 жыл бұрын
Good video saves me from the cold air intake 🙏🦾😆🙌
@EverydayOutdoor
3 жыл бұрын
Lots of good info, thanks brother! Good luck on the channel, you deserve more subs.
@craigwood3498
2 жыл бұрын
Thanks for the information. Bought a 04 Tj Sport and now I know what not to do thanks
@bulletproofdirtworx4030
2 жыл бұрын
Thanks
@alexlandsberger1423
3 жыл бұрын
Do a stroker kit get more low end torque over forced induction
@skiddysm
3 ай бұрын
All you should do with a jeep tj is keep it stock and throw a hemi in it
@TheNotSoOrdinaryCarGuy
4 жыл бұрын
Your Jeep is so awesome and you’ve got so much experience from all you’ve done to it. Very intriguing!
@bulletproofdirtworx4030
4 жыл бұрын
The Not-So-Ordinary Car Guy thanks
@humzilla707
3 жыл бұрын
All get points. I think before someone starts modifying their tj they need to make a really big decision, are you going to be comfortable with 35 inch tires or smaller for the life of your jeep. Because changing your mind later is going to cost you.
@blakbanshee
3 жыл бұрын
Tj is my favorite jeep. I’ve had 2 door jk, jkur, 2 yj’s and another tj that I regret selling. Great video with excellent information/advice.
@bulletproofdirtworx4030
3 жыл бұрын
Thanks, love mine, 17 years and still modifying it
@thedogtutor4998
3 жыл бұрын
lol cold air intakes ?? ya maybe 5 to 10 degrees cooler, biggest gimmick
@codyrockwood15
Жыл бұрын
You mean a hot air intake.
@indridcold8433
3 жыл бұрын
Expensive mods, cheap mods, functional mods, cosmetic mods, extensive mods, simple mods, ridiculous mods, mods most other Jeepers hate, mods most other jeepers will love, no matter what, always make your Jeep, "Universal," your own. I have seen Jeeps with modifications I have hated so much I cring. However, I will never badmouth the modifications someone else did. I may heavily dislike the other modifications the other Jeeper made. But the Jeeper that modified their Jeep is still refusing to operate a status quo, upside down soap bowl, front wheel drive, crap box full time, or ever. They still made their Jeep their own and contributed to showing everyone that there are still options to having to drive a four cylinder, front wheel drive, soul sucking factory car. Always make your Jeep, "Universal," your own. True car people and true Jeep people will never badmouth the modifications others make to their Jeeps and cars, no matter how much they hate it.
@tariklaarej2259
Ай бұрын
Man you talked about exactly what I wanted to change l. Axle, engine crap etc . That’s the best overall video I found so I don’t waste money or spend it right
@bulletproofdirtworx4030
Ай бұрын
@@tariklaarej2259 thanks Have fun upgrading
@MEDEDOME
3 жыл бұрын
Thank you for sharing George. Really dig your TJ. I have a 03 TJ Rubicon. All original never modified. I am the second owner my brother special ordered it from Jeep in 2003. My TJ is due for new shocks now going on the 2nd set and new coil springs and front fenders. Will be leaning towards Old Man Emu Suspension package and factory correct type aftermarket front fenders. I like to keep my TJ original like my dads old 1971 CJ5 was. Used to push around dead vehicles and plow snow at my dads shop in the early 70's.
@bulletproofdirtworx4030
3 жыл бұрын
Thanks for the note on your TJ. Lots of stock fenders out there on FB marketplace, CL, eBay. Good luck. Old Man Emu stuff is great.
@MrAbsentdriver
4 ай бұрын
Great video. Truths.
@slant6guy
4 жыл бұрын
An EATON M62 supercharger with the 7th fuel injector kit is the best as it runs cooler and doesn't need an intercooler. Next: Ford 8.8>D44. Also, minimal armor needed (oil pan, diff covers, tummy tucker). For the "Jay Leno rich", pull the AMC 4.0L six and stroke it to a 4.7L torque monster six...the unimaginative would say put an GM LS v8 motor there = blasphemy, _but to each their own_ . Good video & thumbs up!
@czechnolike
4 жыл бұрын
Good points. Why not bore out your 4.0 for more power?
@bobert201164
3 жыл бұрын
Best mod i did was a 8.8 swap and 4.88s on my tj
@lindeleasley
2 жыл бұрын
I looked for about 3 years for a D44 and finally gave up. Swapped in a 8.8 with 4.88 gears, disc brakes and an ARB locker and called the rear done.
@rogerjones1466
3 жыл бұрын
Great information thanks for making this video. I’m now a subscriber.
@bulletproofdirtworx4030
3 жыл бұрын
Thanks Roger
@OFFROADSLuTZ
Жыл бұрын
Ever get rid off the box of unwanted gear? Lol I will take it.
@bulletproofdirtworx4030
Жыл бұрын
I still have some stuff, anything in particular you are interested in.
@cdnorthup
Жыл бұрын
Great information
@hilldwler420
3 жыл бұрын
I run adapters with 18s on my tj
@reignmack
Жыл бұрын
Thanks for this video
@bulletproofdirtworx4030
Жыл бұрын
You bet, thanks for watching
@jerrywhalen2100
4 жыл бұрын
Any advice on Switching fuel injectors or do the stock ones work perfectly well
@bulletproofdirtworx4030
4 жыл бұрын
I used some cheap 4 hole ones off Amazon. They have done well for a year at least. They were like $80 for all 6.
@ansongray6734
4 жыл бұрын
Would really like to hear more about possible axle upgrades. Lots of BS out there from guys that really don’t know what there talking about with unlimited dollars. Would really like to get rid of the Dana 30 for a Dana 44 in my LJ, but it’s 3k+ from a junkyard. Any advice is appreciated.
@bulletproofdirtworx4030
4 жыл бұрын
Ok, I’ll give a shout out to Nate at DirtLifestyle. I like his video on a older high pinion Ford Dana 44 front. Look up his channel. It takes some fabrication, but, a really strong housing and tubes, high pinion. Locking hubs, better brakes. Parts are cheap for one of these compared to aftermarket stuff. I personally, would just keep it full width.
@jimmyvalhalla1939
3 жыл бұрын
HP D 30, non vacuum disconnect from a Cherokee are a dime a dozen
@holton345
3 жыл бұрын
@@jimmyvalhalla1939 I run one of those on my 2003 TJ. It is great, too. I like it a lot more than the fake Dana 44 that came stock on the Rubicon TJ. I got my HP 30 off an old MJ for like a hundred bucks.
@JeepTeriyaki
2 жыл бұрын
@@bulletproofdirtworx4030 Agreed Nate Pickles at Dirt LifeStyles is great
@lifelong5425
4 жыл бұрын
Enjoyed your video...I'm new to jeeps....and in my experience so far, found the 17 inch rim aftermarket wheels to be a pain...just sold the lot...did not have the 5x 5.5 though... I have gone back to 15's...(16 seems to be getting phased out)..with 31 x 10.5 x 15's...The jeep suddenly came to life...easily accelerates now up past 50 mph, and it didn't feel sketchy once..barely a tremble..and it feels more able, more in control...my 2 bits worth on going 17 is to make sure the rims really fit..putting on the jeep 15's..They balanced up no problem... I'm never going to do the rock climbing thing ,but I want to be confident on off roads that get me out there... I was intrigued by your 5 x 5.5 information. ..thanks...hope to see more of your stuff
@suchgr8hieghts
3 жыл бұрын
yeah 17s are great for larger brakes and tires.. 35's and up basically. so you did the right thing going back to 15s with 31's especially if you plan on keeping it that way.
@JeepTeriyaki
2 жыл бұрын
Rule of thumb your rim size should never exceed more than half your tire size for off road applications maintaining enough side wall on your tire so you can air down properly.
@Whiteandsonsgarage
5 жыл бұрын
I have the performance thing, never ended up any good and just went back to stock, great video
@bulletproofdirtworx4030
5 жыл бұрын
Thanks , it has been a waste of money. If you ever make it to America, I’ll need to guide you through the Rubicon
@Whiteandsonsgarage
5 жыл бұрын
Jeep TJ Tech George Croll I will definitely be taking you up on that, thanks mate
@ujayet
3 жыл бұрын
I think there's nonthing you did that would be bad to the jeep... if you only drive on paved road I dont see anything wrong with the weight.. but if you do alot of off roading.. then I would agree with everything here as you want to your jeep to be fairly light where needed.. usually when I'm off road.. I don't even have spare tire in and cool numbers are also removed.
@adamrosetattoo
2 жыл бұрын
Thanks! I did 17" rims on 4.5. Wish I would have seen this first
@bulletproofdirtworx4030
2 жыл бұрын
Thanks for watching anyway. It does make it hard to upgrade
@premiertermite8296
4 жыл бұрын
go Steelers!
@bulletproofdirtworx4030
4 жыл бұрын
Let’s hope they don’t cancel football season
@OntarioFreshwaterFishing
4 жыл бұрын
Get yourself a tripod man, your content is excellent and I think you would gain so many more subscribers with a steadier camera. Either a tripod or a gimble for your camera man.
@bulletproofdirtworx4030
4 жыл бұрын
whiteouthamstra will do, sorry bout that
@jeremy8715
3 жыл бұрын
Black magic brakes are dual piston and work with 15” wheels.
@bulletproofdirtworx4030
3 жыл бұрын
I had that setup, worked ok till I went to 37” tires
@greggoett
3 жыл бұрын
Says go with 5 on 5.5" lug pattern.. Jeep has 8 lug axle
@bulletproofdirtworx4030
3 жыл бұрын
True I went to 5.5 years ago. Then to 8x6.5. If you are using a Dana 44, Ford 9 inch, then go 5.5. Once you go to one ton axles, you can do either. I have a 14 bolt one Tom rear and Dana 60 front, and I run spacers with 43 inch tires. That’s way outside the norm for a TJ. As is the 8x6.5 lug pattern
@extremeduty2570
2 жыл бұрын
Give the man a mic.
@sonandsanford4963
2 жыл бұрын
Great, great info. Thanks for the video.
@bulletproofdirtworx4030
2 жыл бұрын
Thanks for watching
@REDMAN298
3 жыл бұрын
I had a `99 TJ from the south and it had the cold air intake,big throttle body, header and dyna flo exhaust, a FI chip and the power was OK until I put on 33`s The braking sucked too.
@rediron44
2 жыл бұрын
If you go up in tires size, you need to regear your axles. Probably 3:07 or 3:54 gears stock at best. Going to 33s, regear to 4:27 or 4:56 gears. You'll get your engine back in the correct ram range
@REDMAN298
2 жыл бұрын
@@rediron44 It had 3:73`s. A Wrangler needs 400hp and 1 ton axle lockers. I broomed it and got a C6. That and a Harley Springer are my current toys.
@desertadventures4221
2 жыл бұрын
Nice video
@bulletproofdirtworx4030
2 жыл бұрын
Thanks, have fun out there
@UncleUnicorn
3 жыл бұрын
Can someone please tell me what front bumper that is at 2:24
@bulletproofdirtworx4030
3 жыл бұрын
I’ll have to ask Matt, it was on his Jeep when he bought it
@bulletproofdirtworx4030
3 жыл бұрын
Body Armor, 59” triple hoop Matt says it may not be produced amymore
@chuckmeade8149
4 жыл бұрын
I could use the tuner Just put a stroker in mine
@bulletproofdirtworx4030
4 жыл бұрын
Where do you live
@chuckmeade8149
4 жыл бұрын
Jeep TJ Tech George Croll Pennsylvania
@fomocoloco7172
4 жыл бұрын
What bumper is that on the second jeep?
@bulletproofdirtworx4030
4 жыл бұрын
thePhysics meister not sure, haven’t seen that guy in a few years
@fomocoloco7172
4 жыл бұрын
@@bulletproofdirtworx4030 dang it that's like my ideal bumper
@bulletproofdirtworx4030
4 жыл бұрын
thePhysics meister check Gen Right, they have some aluminum bumpers that are $$$, but sweet. Poison Spyder has some cool stubby bumpers as well. I think Metal Cloak makes stuff similar as well
@fomocoloco7172
4 жыл бұрын
@@bulletproofdirtworx4030 I might just have to learn how to weld I REALLY like that bumper
@mattquackenbush4357
4 жыл бұрын
thePhysics meister which Jeep? The one in the intro? Or the other red rubicon? If you’re referring to the red rubicon it’s mine.
@scalefreakgaming
4 жыл бұрын
You lost me on “You can’t get a bigger break on a 15” wheels” Yes you can.
@bulletproofdirtworx4030
4 жыл бұрын
Ok, you are correct. I guess I should have said I’m not a big fan of the 15” wheel options for brakes
@kenuber4766
3 жыл бұрын
Be alright, if only you could here you.
@stephenjett7838
3 жыл бұрын
Can't hear a lot of this video because of the wind noise
@Kivavitch
4 жыл бұрын
Must be nice to be rich.
@bulletproofdirtworx4030
4 жыл бұрын
Lol, rich is all relative, I have a loving wife, steady job, good health, great friends. I’m as lucky as any billionaire
@lucatosi2933
4 жыл бұрын
seriously... it’s like this guys shitting on everyone for not putting 40s and 1 tons on their TJ. some of us are just trying to get into the woods and go fishing or camping or whatever.., you don’t need all types of performance upgrades. just get out there and enjoy your jeep. there’s no wrong way to do it (except angry eyes lol)!
@ironicchannelname6457
3 жыл бұрын
@@lucatosi2933 my Jeep runs stock axels and 33s never had a problem what he needs to add to this video is clarification it all depends on what you are using your Jeep for mine is my daily driver and weekend explorer
@JeepTJWheelin
3 жыл бұрын
@@lucatosi2933 There's a lot of 🐂💩 out there for this constant need to get folks to do unnecessary builds. I have a 2.5" lift on 32 KO2's. Never had any problem getting to my favorite fishing hole, camp site, home from a trail and my favorite, beach/dune wheelin and surf fishing. If you have any skill, you can navigate through most anything. Anyone with any common sense realizes the aftermarket creates a false narrative for what is "necessary" for a proper build. You "need" at least 35's, no wait...make that 37's to do that, Bs! Then once the poor ignorant slob bites on that, he becomes another resident to the Just Empty Every Pocket - Moronville, USA. My '05 TJ Rocky Mtn as it sits right now is by far the best vehicle I've had. It's an amazing TJ with solid capability. Build your rig for what you will use it for. And 90% of the wheelers out there can do most everything with a 2.5" lift on 32's or at most a 3" lift on 33's.
@Pusfilth
Жыл бұрын
@@JeepTJWheelin if you’ve got money spend it and enjoy it
@thomaschambers157
Жыл бұрын
Sounds like you opened a can of worms
@bulletproofdirtworx4030
Жыл бұрын
Lol Lots of mistakes on the path. Been amazing the way it finally turned out. Drives, steers, brakes better than new on 40’s. Wheels amazing on the 43” sticky’s Thanks for watching, hope you don’t make all those mistakes I did 😂
Пікірлер: 109