This car is so cool Aaron thank you for showing us the build
@adamyang5581
2 жыл бұрын
im loving the sound of this sohc turbo build, sucks that the head is lifting even with the arp. Im doing a mild vitara build and probably just looking to do 300hp and hope the head does not lift. Your build sounds solid, keep up the work brother
@Bassknots
2 жыл бұрын
Nice ., I want to get started on my build .. car and build is clean sounds great. . Looking forward to seeing this sorted . Sucks about the studs and head lifting I was wondering about that as I was watching . I’m trying to avoid the issue if I get any where near as close
@shakeemnewman9765
10 ай бұрын
Man love your setup
@TURBOTRISTO
2 жыл бұрын
Inspirational bro good job
@spdwebdotnet
2 жыл бұрын
Nice build
@blackreef9972
3 жыл бұрын
Good to see other people pushing the little d series. Currently building a awd d series with a borge warner 362sxe
@stevo_sir
3 жыл бұрын
Congrats, now here’s your 🍪
@blackreef9972
3 жыл бұрын
@@stevo_sir thank you chieftain. Let me know when that vette Is ready to go to gapplebees
@FreezyFBaby420
Жыл бұрын
What exhaust manifold did you use to keep ac?
@joseamaya3352
2 жыл бұрын
What’s your set up with the transmission is it still holding up?
@joshualessard2325
2 жыл бұрын
What’s your compression on that setup
@GA1.6T
Жыл бұрын
What compression are these pistons?
@mariobarrantes4137
2 жыл бұрын
Turbo size ?? I being having issues with my set up
@boost_edjamesmathew2168
3 жыл бұрын
These are the head studs I run they been holding 30psi no problem they're 11mm×1.5 They work on D15B v-tec or D16Z6 heads you will need to time sert your block and drill the head
@ACGarage614
3 жыл бұрын
I bought srt4 head studs already. Drilling and tapping the block as we speak.
@boost_edjamesmathew2168
3 жыл бұрын
@@ACGarage614 it's not hard just time consuming your going to have to grind down the washers cause they're too wide I just put them on a bolt and nut and grinded them all together it's way faster also you have to drill the stud holes on the head cause the 11mm head studs don't fit although they did barely fit through my head gasket anyways good luck that should solve your head gasket issues
@drseus808
3 жыл бұрын
Sheeessshhh
@periosavethesohc
3 жыл бұрын
Turbo and ecu?
@SIRICKO
2 жыл бұрын
I have A filter smaller then yo jegs and I have never had A problem on power.
@badluckclub6630
2 жыл бұрын
Yo man, you gotta live close by me, Im in the GC area outskirts of cbus. Little red boosted EF hatch running around with no front end on it. lol Would be cool to hang with another d series dude sometimes man!
@ACGarage614
2 жыл бұрын
Yea. I’d say you’re within 20mins but no I haven’t seen your car around.
@badluckclub6630
2 жыл бұрын
@@ACGarage614 Followed you on IG.
@parisvernatter
2 жыл бұрын
Your in grove city?
@jayydaman6784
Жыл бұрын
What ur build setup
@manueld16singlecam83
2 жыл бұрын
How many foot pound you tight the d16 arp headstuds before lifting the head?
@rantstm8836
2 жыл бұрын
try 65ftlb that's what I have
@rego00001
2 жыл бұрын
Hey, Ohio! Right on, up north or south?
@TheDriftSG
3 жыл бұрын
What timing where you running on peak boost?
@ACGarage614
3 жыл бұрын
4
@lordstorm8555
2 жыл бұрын
Hey were did you find a conversion kit for the coil packs instead of using distributer?
@Casey_and_Cars
2 жыл бұрын
Burton-racing.com
@DevinScott-to8ee
2 ай бұрын
Right
@ej.tyloc22
9 ай бұрын
Did Quentin happen to tune your car bro? I’m from Columbus 😂 Edit:watched full vid got my answer lol if you’re in the Columbus area still come out to cars and coffee season 15 finale Saturday
@Constantuned
3 жыл бұрын
nice setup. Howd you mount the coil on plug? and what pump are you running?
@ACGarage614
3 жыл бұрын
Burton racing coil plate. Y8 crank n pump
@Constantuned
3 жыл бұрын
@@ACGarage614so cool been wanting to run that. I found your install video on the COP kit. Any reason you didnt run z6 crank?
@ACGarage614
3 жыл бұрын
@@Constantuned just used what i had.
@jamzempire
3 жыл бұрын
You can use a d17 valve cover and gasket….
@Constantuned
3 жыл бұрын
@@jamzempire heard rumors of this. Do the studs line up?
@joseamaya3352
2 жыл бұрын
What’s your set up with the transmission and is it still holding up?
@ACGarage614
2 жыл бұрын
Stock y8. Sold everything
@ProfessorPuffyPants
3 жыл бұрын
Did you guys mention what fuel is in it?
@ACGarage614
3 жыл бұрын
E85
@jimhiscott2918
Жыл бұрын
If it lifted the head using ARP studs at only 479hp that's more coffee a build issue then a head stud problem.
@shakeemnewman9765
10 ай бұрын
That's the same thing I was thinking too
@DAV4WSR1
5 ай бұрын
Great! like that ! i do on my youtube chanel 295 HP and 377 tq with an D15Z6 at 18 psi ! CIVIC DAV4WS Slip-peut on dyno if you interesting . congratulation from France !
@juangarnica1879
3 жыл бұрын
Did u sleeve the block at all? Or just stock block, currently building the same setup
@ACGarage614
3 жыл бұрын
Stock cylinders
@tyferguson564
2 ай бұрын
Did you ever get the head gasket fox and what head bolts did you go with?
@ACGarage614
2 ай бұрын
No. I parted the car and went back to k series builds
@tyferguson564
2 ай бұрын
@@ACGarage614 yikes, I was just motivated for the d series.. I guess it’s K series then
@dylanmittal-lohse6387
3 жыл бұрын
Whats done to the crank to make that kind of power?
@ACGarage614
3 жыл бұрын
Just off the counter vitara pistons Speed factory long rods King bearings Chamfered crank
@Constantuned
3 жыл бұрын
@@ACGarage614 Z6 or Y Crank?
@Constantuned
3 жыл бұрын
@@ignnext-gengameplay9274 true but the z6 crank fits into the y8 block. That's what I'm building right now.
@rantstm8836
2 жыл бұрын
@@Constantuned go with z6 crank if you can. I spun a bearing on an a6 crank
@abbas674
2 жыл бұрын
@@rantstm8836 I have a a6 crank isn't it the same
@danielpersad5789
3 жыл бұрын
What turbo are you using here?
@ACGarage614
3 жыл бұрын
Pte5831
@danielpersad5789
3 жыл бұрын
@@ACGarage614 ok thanks. Nice build man
@BuyingTickets
3 жыл бұрын
What clutch are you running? You recommend it?
@mihailpetrovici5044
3 жыл бұрын
He said act
@BuyingTickets
3 жыл бұрын
@@mihailpetrovici5044 thx
@Fackler91
19 күн бұрын
What exhaust is on this
@ACGarage614
19 күн бұрын
@@Fackler91 apexi ws2 with a custom 3” cutout that open when ever in boost.
@@bseries8826 just bought a gsr and have a awd crv donor. But i want to k swap something. What would you k swap?
@bseries8826
2 жыл бұрын
@@ACGarage614 oouu. Nice. Man I would probably k swap awd a hatch(eg/ek). Any 90s Honda chassis is a good platform. Im almost done with my k swap (k24/20) eg hatch. Just need to do the radiator and put in oil, coolant, etc..
@ACGarage614
2 жыл бұрын
@@bseries8826 well i have several chassis to work with. Ek sedan. Ek hatch. Eg hatch. Integra. You pick my next k swap. Probably wont be awd right off the back but it will be my next fwd drag car. Not a daily.
Пікірлер: 84