Don't forget to truly tune it! Like the AF screw. Pretty good tip if you have to 2 or more turns out from base u generally will need a bigger jet
@xplay751
11 ай бұрын
Little advice when tuning theses slide carbs let the bike warm up all the way b4 making and adjustments to the af,the bikes are supposed to be hot and at operating temperature
@violetstill11
11 ай бұрын
Throw in 1 or 2 cans of TruFuel into the tank. With all the upgrades you have you’ll see an ENORMOUS power gain. It’s 92 octane fuel with no ethanol, the stuff is a bit expensive at Autozone, Advance Auto or Lowes. But it’s 100% worth it especially if you store the scooter for long periods of time since it doesn’t break down or varnish after a long period of time. It’s in a gray aluminum can and trust me you’ll thank me later.
@MangScoots
Жыл бұрын
hey man just wanted to say i love your content, ive actualy been following along and i put an 80 cc kit in my scooter and it runs so so so well now, faster, louder, more able to do burn outs and even pop the front tire up somtimes, thank you again for this video and all of your scooter videos man! scooter sceene is small still but growing in the us and im so fkn excited for it to become a norm to the western world
@throttle_therapy
Жыл бұрын
Thank you! That means a lot🤘I appreciate it. Glad you are enjoying the Content
@xXScumLordXx
Жыл бұрын
ive been following this build for awhile now! ive just installed my 100cc BBK upgrade today and im waiting on my intake, PWK carb and UNI air filter! ive also got the yellow 1500 clutch springs and conca spring but im waiting to install those until i get a feel of the stock springs. Definitely eager for an update but i know your probably taking care of the garage stuff you were talking about.
@throttle_therapy
Жыл бұрын
Update is coming! We are doing a full reno on the house lol... we bit off a little more than we thought we would. Regular videos will be back soon🤘
@xXScumLordXx
Жыл бұрын
@@throttle_therapy getting around 41mph on my app with the 105main/38 pilot. I went to my local shop and was able to get a #98main jet ordered in a pack of 4. Don’t know why I’d need it but hey I got extras for $11 lmao. Gonna put it in the carb and also raise the needle by 1 notch to see if it’ll help with my idle
@rylandnovak9242
12 күн бұрын
So I watched the whole video to find out you ran out of fuel. Uhh okay 😅
@masonnuttall1869
9 ай бұрын
I'm just seeing this now ! Love youre videos man haven this setup on my taotao as well, i haven't perfectly tuned it yet because it's pretty cold now in Western Pa, but these carbs are awesome. Love following along too man!
@throttle_therapy
9 ай бұрын
Heck yeah🤘 glad your enjoying the content
@kalebfriend9519
Жыл бұрын
Bro you look like another KZitemr I follow. Do you have a brother named jay?
@throttle_therapy
Жыл бұрын
I do not! Jay sounds like a cool guy tho🤘
@AllLifethingschannelyt
Жыл бұрын
I get around on my Tao tao pony all stock and 40mph
@Loveliergames
Жыл бұрын
Hey buddy, I'm looking for a Good scooter. I been looking all day, just dont know where to find a good one. Don't Wanna pay much, are you selling or do you know a good website?. Just found your channel looking up scooters. I want a fairly new fast one.
@Tony_860
Жыл бұрын
Can’t wait to see more scooter videos been rewatching ur last 3 all Week lol thanks for the content
@bartekleleniewski1256
Жыл бұрын
yo im going through a similar carb swap and i noticed that i might have to remove a wire and plug (electric choke wire?), is just leaving it unplugged fine or would i have to remove the entire wire system? also added 4 more air filters and gained 22 mph fyi
@nobody94820
Ай бұрын
The pwk 21mm carb says the intake side is 35mm. The link you put says it goes to 32mm. Will that be enough to fit?
@soulvaccination8679
11 ай бұрын
Im gettin bugged ridin up and down the same old strip. I gotta find me a place where the girls are hip, I get a round.
@fthrgasp
Жыл бұрын
Dude...that filter is f*ckin RAD! I support this new HQ idea...the TT Empire must expand! Where do I apply to be a loyal minion? 😆
@throttle_therapy
Жыл бұрын
New HQ is coming for sure! You don't need to apply! I'm promoting you to Head Minion
@fthrgasp
Жыл бұрын
@@throttle_therapy aww hell yeah! 🤣
@AdirondackAmerican
Жыл бұрын
Every rad mod gives at least one to two mph. Keep going and you’ll be hitting 60+ 💪
@throttle_therapy
Жыл бұрын
🤣 I'll add a few more air filters
@carlsheath8918
Жыл бұрын
@throttle_therapy the more the better.....so I hear 😉😂
@MindKontrolleProject
Жыл бұрын
What size main and pilot jets did you use when you had that Glixal 20mm Carb installed? Do you still have the emissions removed?
@yasharostad
Жыл бұрын
Nice video bro! I got a 50cc piaggio nrg power, do you got any tips for tuning on a Italian moped? Its a 2 stroke air cooled doing about 40mph
@throttle_therapy
Жыл бұрын
I wouldn't feel comfortable giving tips with that scooter. Sorry friend! I hope to get a 2 stroke to work on one day! Then I'll be able to learn more and help
@markn2393
9 ай бұрын
What engine code do you guys have on your 50cc taotaos? Myn is 1pqmb139. Does that mean p code engines have the bigger valves? Myn does about 38-40mph stock
@ytoskie
Жыл бұрын
hello, i am 15 years old and have a 50cc gy6 scooter and it has 6g roller weights in and i want to go to 5g roller weights. what is the equivilent in slider weights as i heard they are better. TIA
@kami0712uwurawrxdowo42069
Жыл бұрын
Thanks bro ❤❤❤ much love me and my girl are both buying scooters
@darkrose122
Жыл бұрын
I’ve been waiting on this one!!!
@throttle_therapy
Жыл бұрын
The wait is still on kinda lol. Not finished dialing it in
@removeableskull7446
6 ай бұрын
The orange cdi makes it harder to start if you oval the pick up sensor on the fan engine side if you slide it slightly to the left you get the timing benefits of the orange or blue cdi but with Easter starts for free
@MindKontrolleProject
Жыл бұрын
Anyone know what size (mm) does the Tao Tao pony 50 use for a cone air cleaner? 38,39 etc?
@Tony_860
Жыл бұрын
I ordered a similar 21mm pwk carb for my taotao 50cc with a “100cc” big bore kit on it and it just kept a flooding the engine was sputting and poping like pop corn . Every time I downsized the jets it would run better I’m at an 85 main jet right now and still going down I have an 82 and 80 comin in the mail hopefully does the trick 🤘🏼
@Tony_860
Жыл бұрын
Oh also put the A9 larger cam if that matters lol
@mirkomic8756
Жыл бұрын
I have gy6 50cc scooter 15 yrs old top speed is around 35 mph everyrhing is stock
@airinbone
9 ай бұрын
Templates
@brentking5190
Жыл бұрын
If not enough fuel in the tank isn't the issue, try going up one notch on the needle and lean it out there a tad. So far that's what my scooter seems to like with similar setup.
@redflaxx92
Жыл бұрын
Doing alot of the same myself trying to squeeze up to traffic speed lol. After a recent change, i feel like i lost alot of rpm from my engine, but gained alot of road speed. Swear i feel my valves hitting the cylinder some times. Not sure if its fueling or the quality of the BBK 😅 running a Nibbi Pe19fl, maybe i made a mistake there
@throttle_therapy
Жыл бұрын
I have a hard time finding the sweet spot with tuning. It feels like the scooter runs different each time we ride without making changes. Dialing it in is a constant struggle.
@grazz7865
Жыл бұрын
I’m having a similar issue. I did the 80cc and now the valves are very chatty. I did a test. I adjusted the valves to zero (tappet touching the valve) and ran the engine. The tapping noise went away. I adjusted the valves back to specs and the noise came back. I’m assuming it’s normal for some of these engines to be chatty. I’m also having a problem with the idle. Can’t find the sweet spot. Either too low or too high. Can’t get it right. It’s either the pilot jet is dirty or the carburetor is too small. I’m using the original carburetor 18mm. Other than that runs good. I get to 40 within seconds where before i got to 25 within seconds then it was a struggle to get to 40. I’ll try seafoam first to try to clean it out. If that doesn’t solve it; I’ll try a 20mm carburetor. What’s your ideas in this?
@brentking5190
Жыл бұрын
@@grazz7865 These little engines are definitely chatty to a degree. I think a 20mm would do nice with the bbk. I went with a 20mm cvk before throwing on this exact 21mm carb, and the 20mm absolutely did better than stock without issues. I'm running an 80cc, big valve head, naraku bottom end, and pretty much everything else that can be done to it.
@grazz7865
Жыл бұрын
@@brentking5190 sounds like you did a good job with yours. I don’t know. I noticed the 80cc is a lot more chatty than the 50cc. I know it’s the valves because I ran a test. I adjusted the valves to zero (tappet touching the valve) and the sound went away. Since then I readjusted them to 3mm and of course the sound came back.
@brentking5190
Жыл бұрын
@grazz7865 yeah my 80 is defintely louder in the chat department than the 50 was. I'd like it to be less noisy, but it's at spec and never had any kind of valve/head issues, so I take what I can get.
@linojrfilms1561
Жыл бұрын
good shit, i recommended this last time.
@throttle_therapy
Жыл бұрын
🤘🤘
@MatesNotFound
Жыл бұрын
Nice video man, keep it up
@throttle_therapy
Жыл бұрын
Thank you!
@BigZu423
Жыл бұрын
install video?? with air box removal and hoses??
@erdembas7375
9 ай бұрын
Nice scooter ❤
@throttle_therapy
9 ай бұрын
Thanks!
@mirkomic8756
Жыл бұрын
You can tune your variator at home for free
@pnsmts
Жыл бұрын
polini pwk is better...
@nathanpaullloyd
Жыл бұрын
waiting for the update!!!!
@6969richierich
Жыл бұрын
what size jet did you use on the old 18 mm carb?
@throttle_therapy
Жыл бұрын
I think it was a 95? Or 92? I don't remember forsure
@leohilary4685
Жыл бұрын
Damn upgrade it To 4 valve dohc cylinder head 66 mm cylinders block 30mm carburetor And also an Racing cdi without an limit which may go to 12k rpm
Пікірлер: 63