First saw you with Matt at 731 Woodworks. It caused me to order your base and a couple of bits. Now after seeing your #406 & 552 post I’m inspired to get started and seeing about ordering your other bits. One problem: I have to wait until after Christmas because I gave my wife the box with the base and bits when it arrived and told her this was going to be one of my Christmas gifts. She is so mean, now she won’t let me start playing with my new toy until Dec. 25th.
@oldave100
Жыл бұрын
😂😂😂 Well, you kinda brought that one on yourself
@robertcowan5545
3 жыл бұрын
I’m not a flat background guy, but that is good to know. Good demo, thanks.
@oldave100
3 жыл бұрын
You're welcome Bob...
@krawec1958
3 жыл бұрын
It's funny you have this video today because this afternoon I just got a set of 10 -1/8" spiral upcut bits for my dremel 4000 I am planning on making a 8x11 sign never used this bit but want to try. Thanks for the advise and pros & cons will send you a picture when I am done.
@oldave100
3 жыл бұрын
Glad I could help
@lloydfortner1663
3 жыл бұрын
Mornin Eric, enjoyed the video. You do a good job demonstrating and explaining things. Hope yuns have a goodun
@oldave100
3 жыл бұрын
Thank you Lloyd...
@emilkiyak2344
3 жыл бұрын
very good and helpful video. like the pros and cons you presented.thanks for the info.
@oldave100
3 жыл бұрын
Glad it was helpful!
@tomstone2322
Жыл бұрын
I will definitely be ordering these. I just ordered the carving liner think I will use this more. Thanks for the info
@oldave100
Жыл бұрын
The spiral bits are definitely useful!
@jeffvansickler3710
3 жыл бұрын
Excellent video as always!
@oldave100
3 жыл бұрын
Thank you Jeff
@jimduhaime9
3 жыл бұрын
one your demos and honest appraisal. You show us, explain the pros and cons and your personal opinion. Now we have another tool. Thank you.
@oldave100
3 жыл бұрын
Happy to help. Thank you Jim...
@stanmashek3085
3 жыл бұрын
i like the flat background i will order one of these thanks ERIC
@oldave100
3 жыл бұрын
Thank you Stan...
@johnhackman9392
3 жыл бұрын
I like using the up cut bit on certain projects, but use the profile most of all
@oldave100
3 жыл бұрын
Thank you for watching John...
@olddawgdreaming5715
3 жыл бұрын
Thanks for sharing with us Eric, great job and great information. Fred 👍👍👏🏻👏🏻
@oldave100
3 жыл бұрын
My pleasure! Thank you Fred...
@danyodice1048
3 жыл бұрын
Nice demo EZ E...🤘🤘🤘
@oldave100
3 жыл бұрын
Thank you Dano...
@JohnathonWhittaker
3 жыл бұрын
great video Eric! i quite like the smaller spiral bits, I even use the smaller ones down to a 1/16th but with a 1/8th shank. they work great in either a 1/4" or even 1/2" inch router. just need a collet reducer
@oldave100
3 жыл бұрын
Thank you Jonathan, I appreciate the kind words and the tips. I may get a smaller one too...
@artday610
3 жыл бұрын
I always set the depth of both bits on a scrape piece of wood to the same depth before I carve the piece I’m working on...matches up great
@oldave100
3 жыл бұрын
Great idea... Thank you
@skyscrapper9021
3 жыл бұрын
Got mine Monday. Can’t wait to try it out. Got a special sign coming up that it be perfect for. Thanks Eric for letting us know what to expect with bit. Great video.
@oldave100
3 жыл бұрын
Happy to help Gary. Thank you for the business...
@shastastan1935
3 жыл бұрын
Thanks for the info. Wish I would have had this bit for a sign that I worked on today. I'll be ordering one soon.
@oldave100
3 жыл бұрын
Thank you Stan...
@jeffreycallanan184
3 жыл бұрын
Awesome video once again !! Love this bit ! Thanks for this information.
@oldave100
3 жыл бұрын
Glad you enjoyed it, Thank you Jeff...
@SawdustmakerLori
3 жыл бұрын
Great information to know.......thanks!
@oldave100
3 жыл бұрын
Happy to help, Thank you Lori...
@garyzellner9938
3 жыл бұрын
I like both flat background and your textured background.... just depends on the look desired.
@oldave100
3 жыл бұрын
Agreed...
@PopsCustomSignsLLC
3 жыл бұрын
Great bit review Eric. I like the ability to offer flat backgrounds as well as textured for my customers. Not sure if you remember the ones I had you get for me from Amana......but they were even smaller cutting diameters thank the 1/8"......and they are AWESOME!!! Amana bits are the best!!
@oldave100
3 жыл бұрын
Thank you buddy, I agree!!!
@davidcardillo6907
3 жыл бұрын
Thanks Eric very thorough video review
@oldave100
3 жыл бұрын
Glad you liked it David, Thank you for watching.
@dannybrand5045
3 жыл бұрын
Great info: thank you and God Bless Always,
@oldave100
3 жыл бұрын
Thank you Danny...
@scottmorris4914
3 жыл бұрын
Great video demo. And good feedback and thoughts on the bit. I didn’t think about the painting and addtional paint needed due tot he sharp angles. My thought, where a spiral bit is not affected would be on a bigger carving.
@oldave100
3 жыл бұрын
Thank you Scott...
@johnhall8645
3 жыл бұрын
Makes me nervous about the inner parts of the letters carving but just encourages to do more outset rather in inset when using this bit. I ordered two and am looking forward to playing a little with them to get a feel for them. Thank you for all you do.
@oldave100
3 жыл бұрын
It does cut VERY good... I think you'll like it...
@eldonbeyea393
Жыл бұрын
thank you good video.I find that if you first do an outline abound letters with a carving liner bit it helps with tear out with the spiral bit ,but it is another step, I know you have forgotten more about this craft thaN i know sir
@oldave100
Жыл бұрын
Good tip Eldon, Thank you for watching and for the kind words ❤
@poppelegreg14
3 жыл бұрын
Love your channel thanks for all the help wondering if you have any tips with dust and wood chips having lots of problems with my eyes ! My wrap around safety glasses fog up when wearing a mask. Thanks Eric
@oldave100
3 жыл бұрын
Greg here's a video I did on a portable dust collection device kzitem.info/news/bejne/o46lqmuAf6aqgKw hope this helps.
@zitternden
3 жыл бұрын
Thanks.
@oldave100
3 жыл бұрын
You're welcome...
@jasonlunde407
3 жыл бұрын
Thanks Eric I love the flat background! I also like the v-groove look on the inset letters and the slight angle the profile bit gives the outset letters. Wondering if you have tried using the spiral up cut bit after making a pass with the profile bit for outset, and then again after one pass with the v-bit on inset letters? (Assuming you have letters big enough to do that for the inset letters) thanks for the videos!
@oldave100
3 жыл бұрын
Thank you Jason. Interesting idea, I may do a demo on that....
@jasonlunde407
3 жыл бұрын
@@oldave100 that would be great!
@poppelegreg14
3 жыл бұрын
Morning Eric great video great info. How are you liking the cordless router?
@oldave100
3 жыл бұрын
I love it more and more...
@johncoonradtjr.5141
3 жыл бұрын
Do you have a video on how to cut circles with or without a Jig.
@oldave100
3 жыл бұрын
Here's a video I did a couple years ago cutting a circle kzitem.info/news/bejne/o2utz52ocWWnpII
@jameslangston7642
Жыл бұрын
how do you know when your bit needs to be sharpened? i'm just starting out can you tell me the best bits to start with? saw you on 731 woodworks and was interested in sign carving.
@oldave100
Жыл бұрын
Hey James, it takes a little bit to really get the feel for when your bits are dull but the general rule I use is if it feel like you're having to drag your bit through the wood, they're probably dull or they need to be cleaned. Here's the link for all the bits that we use makeawoodsign.com/collections/router-bits If you have any other questions, feel free to hit me up ryan@makeawoodsign.com
@jameslangston7642
Жыл бұрын
@@oldave100 Thank you Sir its a pleasure watching and learning from y'all thank you very much
@usernamemykel
Жыл бұрын
So, would this be equivalent to a Dremel 561 "multipurpose" bit, only the shank is 1/4" instead of 1/8"? They look the same...
@oldave100
Жыл бұрын
The router has a lot more power than the Dremel, so you will be able to carve harder wood deeper and faster using the router and the 1/8” spiral upcut bit.
@jaimegenovajr3257
3 жыл бұрын
Where can I buy a base plate with LED lights? Thanks
@oldave100
3 жыл бұрын
I don't know of one that has internal lights but here's a video of what I did kzitem.info/news/bejne/2JVq0IVrk4eVrZw Let me know if I can answer any other questions, eric@makeawoodsign.com. Thank you
@4everabeast79
3 жыл бұрын
Could you have gone all the way through with the spiral bit to make the insets and outset letters? For isn't the outset s&p would be separate from each other and you can put them on a whole different platform. As far as the inside you will have a hole showing the s&p
@oldave100
3 жыл бұрын
Yes but you would need to make it in several passes, at least 3.
@tessiamathes5830
3 жыл бұрын
Does anyone else feel like Eric is looking at you when he talking about overs ]o
@oldave100
3 жыл бұрын
LOL...
@rogercourtney8376
3 жыл бұрын
Like it
@oldave100
3 жыл бұрын
Thank you Roger..
@usernamemykel
Жыл бұрын
Eric, to prevent splitting using the spiral upcut, would you recommend the use of packing tape on top of the letters? Thank you! PS - Where can one purchase a "Blue Lives Matter"/ "Thin Blue Line" ring, such as yours? Thank you.
@oldave100
Жыл бұрын
You can definitely use the packing tape, But it will bur up a little bit. I don’t really like carving through tape because it distorts the lines as you’re carving, but a lot of people do. And I think you can get the blue lives matter bracelet on Amazon
@usernamemykel
Жыл бұрын
@@oldave100 Thank you!
@johncoonradtjr.5141
11 ай бұрын
This bit can’t ever get sharpened then what do you do with it , throw it away.
@oldave100
11 ай бұрын
Or you can have a machine shop sharpen it, but it's probably cheaper to just buy another one. But, the spiral bits last for a LONG time. We've been using the same one for about 3 years. We don't use it all the time but it cuts just as good today as it did brand new
@markduggan3451
3 жыл бұрын
It doesn't sound like your a fan mate.
@oldave100
3 жыл бұрын
I am a fan but just in certain situations. For most of my stuff I still like a textured look.
Пікірлер: 81