"Transfer the rails to the new drive unit. Make sure they are properly secured, by fastening as many of the screws you still have after losing a few under the false floor".
@98xjdriver
Жыл бұрын
I can't count how many 2.5" hdd mounting screws I've lost through the air holes in those tiles. Even worse when it's a void at the bottom of the rack.
@DenisGomesFranco
4 жыл бұрын
1:25 Didn't knew Freddie Mercury had a side gig as a phone network engineer.
@DJSubAir
2 жыл бұрын
I was just going to comment that too before I saw this comment about it
@kneel1
Жыл бұрын
he never died he just went to work a normal IT job
@423tech
4 жыл бұрын
Nothing like some SWEET 90s jazzy production music
@emcsquare62
Жыл бұрын
Wow. 340MB. Today, we'd be hard pressed to get anything done. My first computer only had a 52MB HDD. I had to replace it 5-6 times until a new system came along.
@Steveos312
9 ай бұрын
Right but for it's time it was storing raw data and this is not a consumer system.
@sethtaylor5938
3 жыл бұрын
I did 5 E translations for cellular office testing at Bell South in Atlanta. Easy peasy. We were still using DAT tapes in 1996. Worked for Att bell labs, later Lucent 1996-2003. We were doing FOA (first office application) testing.
@eric_d
Жыл бұрын
Which Lucent location(s) were you? I had an NJ-ALL badge in 99-01. If you were in any of my locations, there's a good chance I fixed your computer before. :-D
@americanspirit8932
Жыл бұрын
@@eric_d the last few years I was in technical support working with bell labs, resolving very difficult problems. I covered pretty much the entire Northeast of the country. I have a total of 36 years service, I started out, with Western Electric, in, February 1963. I work primarily with simple office electronic switching systems, 1 ESS, tsps, ETS, 4 ESS, 5 ESS, then technical support for all central office systems, throughout the entire Northeast.
@eric_d
Жыл бұрын
@@americanspirit8932 I was only at Lucent about 2 and a half years, from 99 to 2001. My company was contracted to do all hardware support while IBMGS was supposed to handle all software support. I was on the refresh team (replacing computers at the end of their lease and transferring all the users files to the new computer), and the "break-fix" team (fixing any broken hardware). IBMGS totally screwed us over, and made us lose the contract, which put our entire company of over 7000 people out of business. During my time there I worked in at least 2 dozen different sites around New Jersey, from Mount Olive, to Princeton, to Red Bank, to Murray Hill, and everywhere in between.
@JohnMartin-cd1qm
Жыл бұрын
Awesome. I feel confident enough to switch the hard drive out in my laptop now.
@Jerrec
Ай бұрын
Hard Rock Cafe Pullover. Made my day!
@jonathankleinow2073
4 жыл бұрын
Let’s see, 340 MB divided by 70 pounds... this drive gives you almost 4.86 megabytes per pound of disk! Show me a flash drive that can do THAT. Interestingly, despite the complexity, iFixIt still considers this a “Moderate” difficulty procedure.
@apl175
4 жыл бұрын
Would they have ever thought that 128 gigabytes of storage could weigh .0006 pounds (0.25 grams) in a micro SD card.
@straightpipediesel
4 жыл бұрын
iFixit gives it a reparability score of 1/10 since you can't take the drive apart, swap the media, and rebuild the heads like a 1960s disk pack drive.
@DandyDon1
4 жыл бұрын
@@straightpipediesel I believe the CDC drives were sent back for refurbishment? I know the Quantum q2040s could be repaired too.
@HelloKittyFanMan.
3 жыл бұрын
"Per pound of disk"? Um... not all of that weight is in the disk. Also, why the quotes around and random capital on "moderate"?
@jonathankleinow2073
3 жыл бұрын
@@HelloKittyFanMan. It was a joke.
@cybercat1531
4 жыл бұрын
The days before hotswap and automatic drive management.
@syferdet
2 жыл бұрын
4:15 It's like a NASCAR pit crew changing out the rails. 10:58 That's some sweet hard drive changing music.
@viperch25
3 жыл бұрын
4:25 the days of flat head screws i dont miss that at all
@MeriaDuck
Жыл бұрын
Those synths 😍. In the nineties I once helped change a hard drive (in what one would now call a makespace) of about 1 kg per megabyte 🤣. It weighed over 70kg, requiring about three nerds with nerd carrying capacity 🤷♂️.
@thewhitefalcon8539
Жыл бұрын
I'd say 23kg per nerd is not too shabby
@the_tux
5 ай бұрын
Classic DX7 Slapbass
@hansmuller1625
3 жыл бұрын
Management: "There's no need for two people. This procedure should take at most ten minutes. You should have got the drive warmed up before, i'm slashing two hours off your pay."
@OceanPatriot777
5 ай бұрын
Truly we've come a long way baby !!!!
@americanspirit8932
2 жыл бұрын
In the bell system, all memory was totally duplicated, with memory control is controlling, controlling all the data in a central office. If there were problems it's the one system would automatically switch, to the opposite memory which is totally duplicated, without skipping a Beat. Many audits run continuously through the Bell System, any discrepancies would kick out an alarm remove the suspect memory, and put the standby memory online that will run Diagnostics automatically, to see whether there was a memory error or a hardware error. The systems were totally bulletproof from access from outside sources, hash thumbs or monitored 24/7, with all the various audits running continuously 24/7. 100% foolproof from any, interference from anywhere in the world would be detected instantaneously, some of these comments show me that these people really didn't have an understanding how these systems really operate. I am a bit old school from number four and number five ESS, but I understood the operating systems completely, they were 100% foolproof, outside of a earthquake or building collapsing. Today is September 9th 2022.
@thewhitefalcon8539
Жыл бұрын
This is still done nowadays but often at a higher level. Companies with only a few servers can put redundant drives in the same server (which is called RAID), but companies with many servers make the whole servers redundant, and don't bother putting redundant parts in each server.
@thewhitefalcon8539
Жыл бұрын
It's amazing by today's standards how much effort Bell put into automatic testing and diagnostics though. Nowadays we don't bother to diagnose anything in detail.
@americanspirit8932
Жыл бұрын
@@thewhitefalcon8539 you have absolutely no idea what you're talkin about. The belt system is totally redundant, routine Diagnostics run, generally out-of-hours. These systems you cannot learn any college or university. We done the seat is because, communication is the first line of defense. They do not depend on individual privately-owned service doesn't work that way. Too complex and difficult to explain with a few words, what's the information is proprietary, to begin with.
@ttrjw
3 жыл бұрын
Caution: May contain large quantities of the mid 1980s.
@HelloKittyFanMan.
3 жыл бұрын
*late-
@MrWolfTickets
3 жыл бұрын
If, like me, you were wondering what Bellcore was: it's effectively a mini Bell Labs Co started in 1983 for the baby bells, hence they were able to keep using the bell logo.
@HelloKittyFanMan.
3 жыл бұрын
How did you know this and wonder it at the same time?
@DoctorWhom
3 жыл бұрын
@@HelloKittyFanMan. lol. You should double check their work, look up what Bellcore was, and report back if Ben is wrong
@HelloKittyFanMan.
3 жыл бұрын
@@DoctorWhom: I wasn't trying to state whether he was right or wrong, duh. Try rereading my reply because you totally blew it. But I wasn't even talking to you anyway, so you really don't even need to worry about it.
@chem525
Жыл бұрын
It's an SMD interface. I used to design controllers for these drives. We did a scsi to smd interface.
@TomStorey96
3 жыл бұрын
Not a single anti-static wrist strap in sight .. as was indicated as a requirement in another training video I watched a few minutes ago.
@agy234
3 ай бұрын
They also didn’t use the pull tabs on the interface cables, they just yanked the cables out
@jasonluong3862
Жыл бұрын
This was 40 years ago. Today, a harddrive with 1000 times the original capacity is the size of your finger nail.
@arbyyyyh
3 жыл бұрын
3:08 Not the official maintenance video showing pulling directly on the conductors instead of the convenient pull tabs right there!
@yvr2002rtw
4 жыл бұрын
I would assume it is much easier on the newer softswitches these days!
@NortelGeek
4 жыл бұрын
Yep, just pull and replace the SATA drive. If RAID, re-stripe. (depending on how big the CO is) -- I run my company's entire phone system on a thin client and a USB SATA dock (so I can make backups just by inserting a blank 128GB SSD and pressing the 'Backup' button) :)
@user-oh5pn3py4p
3 жыл бұрын
Yeah, our new IP switch takes up only half of one rack, the Ess takes the whole 1st floor
@kimcelarmycx229
2 жыл бұрын
The 5ESS was upgraded later on to use standard SCSI drives
@markemanuele1929
Жыл бұрын
10:49 OMG- defect table... it has been decades since I used that...
@mxg75
Жыл бұрын
Copyright 1989. 340MB, that's a huge drive for that era! "The unit weighs approximately 70 pounds." Ah, there you go. I wonder how much one of these spare drives cost.
@michaelcarpenter1031
2 ай бұрын
Mind = Blown
@KevinInPhoenix
Жыл бұрын
Those 8" drives were so huge compared to the 5.25" drives that replaced them. Ah, the '80s.
@HelloKittyFanMan.
3 жыл бұрын
We had had hard disk drives for 3 decades by this time, and they were already called hard disk drives or hard drives for a long time. Why did these guys think they still had to call them this weird name?
@Okie-00-Spool
4 жыл бұрын
Fascinating. I understand switches like these are still operating to this day. So, do these units that are still operating have to be re-capped and retrofitted with modern storage devices? Also, I wonder what is actually stored on these hard drives.
@Nighthawke70
3 жыл бұрын
They replaced 9 track reel to reel systems with these beasties. And I would not be surprised if they had set up storage systems with one adapter on top of another to enable semi-modern storage methods to be used. 5ESS systems are on their way out and very few are left, only in operation in fringe locations.
@HelloKittyFanMan.
3 жыл бұрын
If they weren't still operating to this day, then what would've replace them, supposedly (besides maybe just smaller versions of the same thing that may run on a different OS, like System Signalling #7, etc.)?
@kimcelarmycx229
2 жыл бұрын
Most are SCSI now
@teglin8256
4 жыл бұрын
do you think these older digital switches (DMS, ESS, etc.) will ever find their way to telephony/communications museums given their complexity and since many components for them no longer exist
@NJRoadfan
4 жыл бұрын
Given that Verizon is buying parts on ebay to keep their switches running in addition to retiring copper at many Fios-enabled COs to increase their spare parts cache for the rest..... good luck finding spares. Verizon also seems to be determined to get all DMS-100s off their network due to Nortel going EOL and nobody supporting it. I suspect the 5ESS will be around for a while since there is still support from Alcatel-Nokia. The trend has been to consolidate their local switches to a regional Gentech C20 soft switch (which is replacing the older CS2000 switches).
@jfbeam
4 жыл бұрын
Many of those switches are still in use today. And no, parts are no longer made for them. (your only hope is to find functional "spares" from out-of-service units.)
@techfury90
2 жыл бұрын
They will. A friend of mine acquired a DMS-100 for less than $2000 from a university last year and saved all of the cabinets except for some of the line card cabinets (don't really need more than a few for a museum/lab install) specifically for this reason. He aims to set up a museum around it one day... hasn't fully worked out powering it up yet, though. Needs quite a lot of amps of -48VDC...
@kreuner11
Жыл бұрын
they have one 3ESS in the musuem
@teglin8256
Жыл бұрын
@@kreuner11 yes, but the 3ESS is a monolithic system compared to the 5E. the challenges are far greater in regard to generic software images and operating a 1B computer -- huge electric bill. The best that can be hoped for is a 5ESS VCDX , I doubt we'll see a full fledged 5E unless Nokia or Bell Labs launches an effort to preserve software for historical purposes.
@edwardbyard6540
3 жыл бұрын
"Vast amounts of information" - also known has about 15 mins of an HD movie. How times change....
@roachtoasties
Жыл бұрын
I thought for a second the size of the drive was 340 GB, about the same size as a drive that comes with a laptop. Nope, it's 340 MB. Times have changed.
@starlite528
4 жыл бұрын
What happened to the data that was on the failed drive, is it in some form of RAID where the data gets rebuilt on the new drive?
@SarahAutumn
4 жыл бұрын
I don't have my 5ESS manual handy at the moment, but I suspect that the storage was redundant, yeah. Not sure if it was RAID, like we use today, but almost certainly was something similar.
@dalezapple2493
4 жыл бұрын
Worked on 5ess for a number of years. 5ess used hardware redundancy to increase reliability. The switch was required to be down for only about 2 minutes per year. As I remember, the disk file controller wrote the same data to 2 separate drives And ping pong reads from each drive, so it is similar if not equal to raid on a modern PC.
@NortelGeek
4 жыл бұрын
@@dalezapple2493 I'm a DMS guy, myself. NT went to "Disk-On-Pack" in 2002 and the lower capacity DOP daughter cards wrote to a larger disk for redundancy. You had to 're-image' a DOP if replaced. Do you recall when WECO/ATT went solid-state?
@dalezapple2493
4 жыл бұрын
@@NortelGeek nope, in my time 5ess used the 300mb removable disks, and later 340mb non removable disk platters. For the 300mb the platters were about 15 inch diameter and 12 or so platters.
@kimcelarmycx229
2 жыл бұрын
The 5ESS later used standard SCSI drives
@tpcdude
4 жыл бұрын
Great blast from the past .. maybe a nightmare from the past... Are we still switching calls?
@icovada
4 жыл бұрын
It depends. Backbones are completely digital and a single 4 rack unit machine like an Oracle Acme Packet 6350 (which given its capabilities + licensing + redundancy might end up costing a million $ per pair, or more) can handle 3 million subscribers and 160,000 concurrent calls. Access networks are a little different as it depends what technology you get your phone service with. If you plug your landline to the back of your modem, it's digital as well and most likely connects to one of the aforementioned machines. If you have good old copper lines, also called POTS, it probably still looks similar to this video
@NortelGeek
4 жыл бұрын
@@icovada Yep, still a ton of 5E and DMS100 offices out there (And maybe a few XB5 and CG0) but they can't beat the offerings of an IP connection when it comes to price or variety. (Maybe in reliability, but that's a discussion for another time.) It's still fun to see these in action again, though. :)
@HelloKittyFanMan.
3 жыл бұрын
"Are we still switching calls"? As opposed to what other supposed way of connecting one phone to another (even cell phone calls are switched in some way)?
@HelloKittyFanMan.
3 жыл бұрын
@@icovada: Just because something's digital doesn't mean it's not being switched. It all gets switched in one way or another.
@icovada
3 жыл бұрын
@@HelloKittyFanMan. Sure but that's packet switching at layer 3 in the ISO/OSI pile, while the voice would be at layer 7. Either way, "switching calls" in my head is more of a circuit-switching thing, which definitely isn't happening anymore except for the last pure landlines at the last mile
@rustyshackelford8769
3 жыл бұрын
Later, Juan and Carla made their own special amateur video in the back room.
@thcoura
6 ай бұрын
Hello IBM. Teach these guys how make things
@classicpcgaming4194
Жыл бұрын
Where can I get the OST?
@Wtfinc
Жыл бұрын
Why did they even bother with that number 3 sticker. Did they film an actual replacement? Quality with a capital K. We all know that sticker will be on the bottom of the cabinet tomorrow
@amtsgedicht
Жыл бұрын
cool stuff! thanks for sharing! what year is this setup originated?
@jjones503
Жыл бұрын
Ah yes. The infamous flat head screw.
@DandyDon1
4 жыл бұрын
No mention of the 3B15 in the scrolling data.... ;)
@DandyDon1
4 жыл бұрын
I'd like to have seen them find a CDC drive which looked like it had been drop kicked out of the truck. haha I saw that at ATT's Beaudry Building in DTLA.
@DandyDon1
4 жыл бұрын
I wonder how the tech smashed his fingernail....
@satinwhip
3 жыл бұрын
What a hassle. This must be from the dark ages. Modern MHD drives are simple plugin packs. All of our MHD units have been upgraded to flash drives.
@HelloKittyFanMan.
3 жыл бұрын
Another term you could use instead of "MHD drive" is simply "hard disk drive."
@rolfbuchner857
Жыл бұрын
replace many 340 mb drives in 3B5 and 3B15 computers for PacTel
@NortelGeek
3 жыл бұрын
Around 1:53 you can hear what sounds like electromechanical pulsing. Could this have been shot from a blended CO perhaps?
@NortelGeek
2 жыл бұрын
@Miss Kobayashi I just listened to it again. It sounds more like the event printer which was probably impact type. Since they are servicing a drive, there's no doubt that it's throwing errors. It could just be papers being rustled, but it sounded like mechanical outpulsing the first time I listened to it.
@tonymaile7330
Жыл бұрын
I didn't know Freddie Mercury worked for a phone company lol
@mjackstewart
Жыл бұрын
No grounding strap? My guy ...
@arbutuswatcher
4 жыл бұрын
I wonder if that drive was MFM, SCSI, or IDE? In the OG or Operations Gateway of the GTD-5, they were originally IDE mechanical drives, which were later upgraded to SSD Drives. The hard drives in the IROC of the GTD-5, which controls direct-interface to MXU/PairGain Cabinets, are still SCSI.
@lohphat
4 жыл бұрын
Could have been SASI, the precursor to SCSI.
@StringerNews1
3 жыл бұрын
They aren't computer drives, first off. So no to IDE or SCSI. Just as computer drives were once proprietary to their interfaces (like ST506 for PCs), these were probably made just for ESS use.
@kimcelarmycx229
2 жыл бұрын
They're SCSI now
@techfury90
2 жыл бұрын
Neither, it's a SMD interface drive from Control Data Corp. Later on, SCSI became an option on 5ESS.
@chem525
Жыл бұрын
It was SMD interface. I use to work on these drives and I designed a scsi-1 to smd interface for them in 1992.
@JohnRunyon
4 жыл бұрын
- unmount the disk controller - turn off the disk - turn off the other disks - turn off the power to the disks - turn off the power to the disk controller - turn off the power to the disks again Aiyiyi...
@JohnRunyon
4 жыл бұрын
Also, remove ground *then* power? That's backwards... What? Edit: oh... There are two ground leads? Why...
@Madness832
3 жыл бұрын
Was ponytail a girl or a guy (hard to tell)?
@HelloKittyFanMan.
3 жыл бұрын
Ponytails are neither. They're not living.
@acoustic61
4 жыл бұрын
I would have yanked the power cord and ripped this drive out in 30 seconds!
@fabriciobocardo3887
2 жыл бұрын
Fred Mercury era o engenheiro? kkkkkkkkkkkkk
@Lion_McLionhead
Жыл бұрын
By 1993, they were putting 200MB into laptops, so it seems a bit low tech for 1989. Women doing manual labor is so scandalous by today's standards.
@cromulence
5 ай бұрын
Jesus Christ. The seems needlessly complex given the tech that was available already at that time.
Пікірлер: 111