You got it right Pepe. Check factory ground cable to block and frame clean or replace as needed.
@ritoreveles4134
2 жыл бұрын
That's right don't forget same with Dodge always service grounds
@007.3l
5 жыл бұрын
Make sure to clean the mounting surfaces where the transmission mounts to the back of the engine to make sure that it gets a good ground especially now that the trucks are getting older, also if you're going to add another ground cable, #1 - add 1/0 cable from driver side frame rail to engine block just like you said. #2 add a 1/0 ground cable from one of the transmission mounting bolts to frame rail as well that way the transmission has a direct ground right to the frame instead of through the pump and converter
@rtrans960
6 жыл бұрын
Thanks Pepe, great demo.
@kiranmankodi269
6 жыл бұрын
Excellent demonstration Pepe. Makes sense to check and clean grounds on chassis. Or replace cables.
@brianflanagan5173
5 жыл бұрын
Great video... very informative! Thank you!
@garymullins6939
4 ай бұрын
Don’t forget proper fill procedures have a lot to do with it as well that pump is high volume
@ldtexas1648
6 жыл бұрын
Thank you!
@Nico-jh9ms
2 жыл бұрын
The issue is not a ground issue to the starter It is a alignment issue whether the dowel pins are missing or a dirty mating Surface on a transmission or adapter plate the pumps are very sensitive If the transmission is not filled properly If it runs out of fluid For too long the pump will Weld itself
@asanoen1777
2 жыл бұрын
I think I agree with you I'm a Cat tech work on alot of diesels..
@Steve.191
4 жыл бұрын
Thanks 👍
@ronnapierala9769
3 жыл бұрын
The more ground the better, can not have too many ground connections. It's simple electricity .
@608Jaystone1982
5 жыл бұрын
How often do you see this issue? I’ve been through 3 trans and now looks like my current trans is doing the same? Looks like it’s shorting through the pump throwing codes p1744 and p0741 each time. Ground straps have been added, multiple valve bodies, etc. tried different tunes also
@pepetorres8193
5 жыл бұрын
we dont see this issue in our shop, but we do get a few carry in units with this problem, It all depends on how the pump outer gear damage looks. Hope you got it resolved
@mec_gus
3 жыл бұрын
Hallo can help me, I need to know if my 5R110w, makes the changes visible or how the cars or simply are impersectible. Por favor Pepe necesito la respuesta Por favor
@georgebaker3764
Жыл бұрын
Ground in the computer to the body where the problem
@munemrabadi809
Жыл бұрын
pepe, where are you located? I need my transmission rebuild. what is the difference between 2004 and 2006 powerstroke transmission and which one is better to rebuild. thanks
@iampuga1530
Жыл бұрын
Austex performance transmissions near Austin tx great work
@YourTransmissionRepair
5 жыл бұрын
Slow initial fill galls the bushing. Takes a while to finish it off.
@blakecampos5563
4 жыл бұрын
What is the actual point of this video other then clean battery connections and starter location
@repentfulsinner
3 жыл бұрын
Did you know this info prior to watching video?
@pepetorres8193
2 жыл бұрын
its to inform techs and owners where the grounds are located, some people have no idea where they bolt up to.
Пікірлер: 22