Warren, You take the mystery away and explain what you are doing in plain language...well done
@sirrepairsalot4189
4 жыл бұрын
This is great! The only video to cover the reverse Piston disassembly and doing it on the fly. Thank you for taking the time to make this video man! Helped me out alot!!
@fredrickjohnson823
Жыл бұрын
Awesome video. I have an 06 super duty wagon and seeing it done has given me a boost of confidence that I could do it.
@eligrigsby12
2 жыл бұрын
Really appreciate this video! You’re helping people 4 years later
@1995jug
6 жыл бұрын
Sounds like you live in a place like mine only you can get is beer, wish I knew as much as you have forgotten you are the man.
@CorkySandpiper
6 жыл бұрын
Thank you for taking the time to teach the rest of us!
@bundylovess
7 жыл бұрын
Nice job mate your a awesome mechanic and thanks for showing us how it's done ✅
@westerntruckandtractorrepa1353
7 жыл бұрын
allan mitchell Thanks
@ldtexas1648
6 жыл бұрын
Thank you for this! Helped me a lot. May have to do mine soon.
@juanmanuelalvarez96
4 жыл бұрын
This is really good stuff, thank you very much!!! You’re the man! Rebuilding mine as I type.
@3347861
6 жыл бұрын
Rebuilt the 545rfe in my Dodge a couple of years ago. Trans wasn't bad, but the torque converter hub sheared and I wasn't about to put a trans with 140k on it back in.... I've done a lot of autos over the years but this one threw me for a loop. Couldn't get the clutch pack clearances right. Bought a builder's manual and discovered that the clutches and steels looked the same but were different thicknesses. Few minutes of sorting them with a micrometer and everything dropped right in. Lesson learned. Thanks for another great video, Warren!
@westerntruckandtractorrepa1353
6 жыл бұрын
John Baugh I've got a 545rfe to do this winter. I like doing those automatic transmissions, for me it's easy bench work and not so damn heavy like the rest of the stuff I work on.
@edvaldorozendo
4 жыл бұрын
Montei a minha caixa 5r110w obrigado pelo vídeo muito explicativo.
@bobbysmoke6.4dzl94
6 жыл бұрын
Thanks for your time and videos brother in grease!! I’m going to be doing my 5R110 in a few weeks. I can’t afford the cost of a shop to do it and I am the only person that turns the wrenches on since I’ve owned it. People always tell me to trade it in but I love my 6.0 and I would be saddened if I just gave up on her. Anyhoo, thanks!
@pabcastil8
5 жыл бұрын
Bobby Smoke6.4 did you ever did yours
@markmacias8263
6 жыл бұрын
Good video, all I could add is inspect and replace the bushings in the drums. Especially high mileage trucks. Keep up the videos.
@gjb79ful
6 жыл бұрын
Lovely chime when you knocked it with the planetary carrier.
@ldtexas1648
6 жыл бұрын
Noticed that too. I wonder if there are a lot of worn out cases we could make into wind chimes?
@lordsage8946
Жыл бұрын
Thank you so much for this video my man
@westerntruckandtractorrepa1353
7 жыл бұрын
Merry Chrissy!
@orkhancombe5
7 жыл бұрын
holy shit, 1 hour video. chrissy came early!!!!!!!!
@williammiller283
3 жыл бұрын
I appreciate your video, such a big help. I have a question on where to use the feeler gauge on the low reverse piston. Do you have a timestamp where I could see it? Thank you very much
@jrneff9773
11 ай бұрын
thank for your vid in just as cheap to order a reman
@carloszaldivar6770
2 жыл бұрын
Hey thanks a lot, this video is very helpful for someone who's got little to no expertise in this stuff. Do you know what snap ring is the one you show in 38:10?? The one on the stator shaft. thanks again man!
@jmsjro6
6 жыл бұрын
I was thinking you had a 4R75E rebuild video, do you? TIA
@tylercole5604
5 жыл бұрын
I installed transmission after rebuild and put it into drive the tail shaft spins and I put it in reverse and still spins the same way also neutral spins the same way what would be the issue
@danb372
7 жыл бұрын
Good vid - thanks. I am doing this on my '05 soon. Getting my kit from OPT as well. Have you seen their 2-clutch billet converters for the 5R110W. Any thoughts on those? thanks
@westerntruckandtractorrepa1353
7 жыл бұрын
Dan B I haven't used any in the 5r100's but I have used the dial disc converters from them on the Allison lct1000 in the Duramax's and they seemed to hold up just fine.
@danb372
7 жыл бұрын
thanks again. One more question if you don't mind: A lot of folks seem to prefer a low-stall converter on their F250's. Do you or your customers prefer a lower than stock stall on a torque converter? This truck is my daily drive and I pull a bass boat on weekends (stock tune). I don't have any dislikes really about how it drives but I want to consider all options. I don't know if I'd like it or what the benefits of a low stall converter would be. Thanks for your time! Dan
@westerntruckandtractorrepa1353
7 жыл бұрын
Dan B Most of these Farmers and ranchers constantly have either a stock trailer or gooseneck flatbed they pack around, and I have always just used the stock converter stall. I have put high stall ones on some kids pickups that like to race and tear their stuff up. To be honest I have never had any one ask me for a lower than stock stall replacement.
@caterpillar6nz310
Жыл бұрын
better than allison 1000......5r110w is tough like hell my 2 cent
@latedconstrutora1011
4 жыл бұрын
Caso precise de algo aqui no BRASIL estarei a disposição... Saiba que o mundo gira e todo precisamos uns dos outros ok. abraço.
@mrsincere4640
8 ай бұрын
What type of solvent do you recommend to clean the components of the tranny, the transmission case, and a differential? Thx
@dianareta338
2 жыл бұрын
Hey man we're can I find a manual like yours but software thanks
@bstance5485
5 жыл бұрын
That low/reverse spring compressor, does that one actually work? Thats only about 30$ on ebay. Conpared to 130 for the actual 5r110 one
@westerntruckandtractorrepa1353
5 жыл бұрын
Yes, that's what I use.
@ai_university
2 жыл бұрын
@@westerntruckandtractorrepa1353 are you talking about the T-0151 tool that is for the th350 and 4l60 series GM transmissions? Getting ready to do this myself
@gustavosolis2244
3 жыл бұрын
Hi I did check all ,but there Is no shift.can you help me please.
@jmsjro6
6 жыл бұрын
Have often do you or anyone else reading this post get too many steels or frictions in a rebuild kit or maybe sometimes get the wrong frictions?
@westerntruckandtractorrepa1353
6 жыл бұрын
Chad Cole Quite often
@jmsjro6
6 жыл бұрын
Thanks for the quick reply. Excellent video by the way, I especially like the use of the bailing wire, saved me a few dollars.
@fattmouth7715
6 жыл бұрын
Dumbass I got the wrong piston hahaha funny stuff. Just about every mechanic I know talks to himself including me😎
@ldtexas1648
6 жыл бұрын
LOL! Yeah, me too!
@Logjam5
7 жыл бұрын
Hi, need a manual for my f350, like the look of the one you have, would like order a copy, who is the publisher please? Thank-you.
@westerntruckandtractorrepa1353
7 жыл бұрын
Logjam5 That is a paper back version I bought directly from my local Ford dealer.
@Logjam5
7 жыл бұрын
Thanks, I'll see if I can get one from my local dealer.
@latedconstrutora1011
4 жыл бұрын
Good afternoon I'm in Brasilia Brazil here does not sell this manul, give me the name, email site so I can get this manual 5R110W. Thanks.
@chrise3801
5 жыл бұрын
My 5r110 goes into reverse slow,every other gear works perfect and once it goes into reverse works good,anyone have any idea what would be the problem? Solenoid?
@sirrepairsalot4189
4 жыл бұрын
Probably worn direct clutches.. they use the same one for reverse and fourth..
@pabcastil8
5 жыл бұрын
My transmission is slipping what do you think is wrong?
@andrewstevens9246
5 жыл бұрын
Clutches could be burnt, bad converter, bad pressure solenoid, could be a few things.
@pabcastil8
5 жыл бұрын
Ok thanks
@burnz163
5 жыл бұрын
Isn't "Mercon SP" spec for this?
@sirrepairsalot4189
4 жыл бұрын
LV surpasses SP. It's the replacement oil for SP I believe.
@mccoytoran1896
4 жыл бұрын
Lv
@mccoytoran1896
4 жыл бұрын
Lv
@latedconstrutora1011
4 жыл бұрын
Good afternoon friend I'm in Brasilia Brazil and here you don't have this catalog if possible, give me the email or the website so I can buy. Thanks....
Пікірлер: 60