Here's a "How To" video for a Starter replacement on a Camaro SS (2010-2015). I try to show as much as I can while underneath the car but in reality It's really quite simple, and should take about 30 mins to do. This can be done on a 2010, 2011, 2012, 2013, 2014 and 2015 Camaro SS.
Here's the instructions, and you can use the video as a reference.
1. Disconnect Battery (negative) & Lift Car.
2. Locate Starter.
3. Locate Heat Shield and remove the three 8mm bolts.
4. Remove the heat shield and expose the starter.
5. Unbolt the two starter mount bolts (13mm). Make sure to hold in place.
6. Carefully rotate the starter to get easier access to the back connections.
7. Disconnect the electrical connector. Located above positive power cable.
8. Remove the (13mm) nut holding positive power cable.
9. Remove and replace starter.
**********************************
Be sure to subscribe and set notifications on so you don't miss another one of my reviews, how to's or any other exciting content!
Негізгі бет Автокөліктер мен көлік құралдары 5th Gen Camaro Starter Replacement (2010-2015) | Applicable for 5th Gen Camaro SS, RS , LT, LS & ZL1
Пікірлер: 109