This setup is 5tph rock gold & alluvial gold mixed wash plant,
it is configured with a trommel scrubber, jaw crusher, wet pan mill, sluice box, shaking table, and belt conveyor.
The raw ore is transported to a big hopper via belt conveyor first, then goes to trommel scrubber, with the grizzly bar on the hopper of trommel scrubber, which can separate out the big stone like bigger than 70mm. After accumulating a certain amount of material, it is transported to the crusher for crushing.
The smaller than 70mm goes to the trommel scrubber for washing and screening with the screen part. This plant, designed with a 2mm screen aperture. That’s mean the free gold nuggets are less than 2mm in the alluvial gold part.
A sluice box will be used here for catching the gold particles first, then goes to the shaking table for gold separation again.
The oversized particles: 2-70mm goes to jaw crusher directly for crushing to a smaller size, then feed into wet pan mill for grinding into a fine powder, to release the inside gold of rock.
After the grinding mill, the output goes to the shaking table for gold separation.
The capacity for this washing plant can be customized as per request
such as 10tph, 50tph,100tph,etc
Негізгі бет 5tph rock gold & alluvial gold mixed wash plant
Пікірлер