Man, I'm over here worried about my lifters at 100k miles 😅😅
@InTheShop
Жыл бұрын
Haha 196,000 on the bottom end in this truck. Fresh lifters, heads, and pushrods. Still has original camshaft.
@hotrod6919
Жыл бұрын
Wow! look's great and you got it done remarkably fast. I've kicked around the idea of bolting on my spare 78/75 from my never ending boosted LS camaro project. But I just know id turn it into another 2+ year project lol I like that glow plug delete. My LS I tried using a cheesy fitting where I had to drill a big ass hole into my pan with a greased up drill bit trying to catch the shavings but ended up yanking the motor back out anyways cause it leaked so bad just to weld it up
@Bacongrease00
Жыл бұрын
Should put you around 550-600hp full out on fuel only. How’s your EGT on a WOT pull?
@JoshSmith-pr3fj
Жыл бұрын
You my friend are an amazing mechanic when endless talent the sky is the limit for you my friend you do very good clean work wish you could work on my 6.0
@InTheShop
Жыл бұрын
Thank you Josh!
@tdchotrods9889
Ай бұрын
Absolutely love the truck. couple questions. is there anything you would change with turbo sizing? also who is the tune from? I have read vgt compounds have been a issue for tuning in the past. Thank you for your time and keep up the great videos!
@hasenafarms6448
Жыл бұрын
Damn son! What a beauty!
@InTheShop
Жыл бұрын
Thank you!
@ExecutiveAutomotiveSociety
Жыл бұрын
Woah, video!
@InTheShop
Жыл бұрын
I know finally right!
@davestewart9146
Жыл бұрын
She looks and sounds sweet 👍😁
@InTheShop
Жыл бұрын
Thanks Dave!!
@nickbader4704
4 ай бұрын
I’m super confused is it draining oil back in to a cylinder??
@InTheShop
4 ай бұрын
No there is a glow plug delete plug. It’s draining the oil into the rocker box
@raydavis7241
Жыл бұрын
Takes imagination!
@taylornichols6563
11 ай бұрын
What diameter pipe did you use from charger to charger and exhaust to downpipe?
@InTheShop
11 ай бұрын
3” between the two and 4” charger to downpipe. If I was running 800+hp I would have like to get 3.5” but the 3” is good for my application.
@kyletapia6810
Жыл бұрын
How did you set up your mass airflow sensor
@InTheShop
Жыл бұрын
I’m not running a mass air flow sensor. The tune is based off of EBP. The mass air it plugged in but tucked off to the side and is only used to measure ambient air temp.
@kyletapia6810
Жыл бұрын
@@InTheShop I’m putting in my set up this week will have have to get a new tune in order to run off my ebp
@joshwollberg3028
10 ай бұрын
Who wrote your tune for the compound set up?@@InTheShop
@InTheShop
10 ай бұрын
@@joshwollberg3028 Blessed Performance
@darienschnepp1664
Жыл бұрын
What did you end up doing with the glow plug module
@InTheShop
Жыл бұрын
Mounted it to the fan shroud
@rodneymiddleton9624
Жыл бұрын
I have a 04 with bad lifters that I’m going to repair soon. Any advice on what to look for? I know it needs a timing cover because the low pressure oil pump is trashed. Thanks.
@InTheShop
Жыл бұрын
Lifters, front cover, and new camshaft. I would also make sure to thoroughly clean the lower and upper oil pans.
@rodneymiddleton9624
Жыл бұрын
@@InTheShop Thanks for the tips. Should I use OEM or any recommendations?
@InTheShop
Жыл бұрын
@@rodneymiddleton9624 it depends on your goals for the truck and what you use it for but the guys at @blessedperformance and get you set up with cam and lifter packages.
@rodneymiddleton9624
Жыл бұрын
@@InTheShop Thank you so much!!!
@chrisrogers8694
Жыл бұрын
what is the best stock budget turbo out there for an 03 f250 6.0
@InTheShop
Жыл бұрын
Stock I would get a genuine Garrett Turbo.
@nicholasvosatka2407
6 ай бұрын
They must be Yankees smh.
@brandoncain91
Жыл бұрын
Bro make vid showing us where you moved oil cooler since turbo is in your way
Пікірлер: 40