Same problem with a 2015 Ford F550 XLT. There were six codes a few days ago, and the turbocharger boost pressure would not go more than twelve pounds. After watching your video, the fuse box was opened, and just as you mentioned, fuse #36 (15 amp) had blown. Will check further into what may have caused the problem. Engine has no modifications. Thank you for your time, Arnold. I appreciate your work. Subscribed. Aloha. K Inouye Honolulu, Hawaii
@timzyrkowski9461
2 жыл бұрын
Very good of you to post this up. I hope it returns to you in work 1000 times over. Another great shop!!
@Disrespectfulyouth
Жыл бұрын
You literally just fixed the issue I’ve been chasing, than you sir
@big_d4749
Жыл бұрын
Thank you for your honesty. I have same truck with full delete and just got the error. Will check fuse.
@mbproductions2292
9 ай бұрын
Thank you so much!!!!!! Checked and I have a blown fuse. Going to confirm the fix soon. Edit: changed the fuse only for it to blow again. There is a module under the passenger front door (part # dc3a-5k202-ac). Mine had water and salt in it causing a direct short. Unplugged it, taped it up really well. Put a new fuse and confirmed the fix. Good to go!!
@user-ku8qf6ip3r
Жыл бұрын
Good honest information to pass on. We appreciate your fairness and honesty. It helps show our industry to the public we are just here to provide and honest service.
@paradigmshift9772
Жыл бұрын
Great integrity!! Honesty is the best policy and you definitely demonstrated that!
@hamzakhouly
4 ай бұрын
Man god bless you Honesty will get you so far in life!
@zbeavers317
6 күн бұрын
P00BD came on after installing an Intercooler pipe kit on my 2013 6.7. Runs great, just can’t get the light to shut off
@gregoryshelton1358
4 жыл бұрын
You are top shelf! I have that exact problem! My fuse cover has extra fuzes so it’s free. Thanks 1,000,000
@DreamWorkAutomotive
4 жыл бұрын
I appreciate that brother anyting else you guys need just hit me up
@briansanchez7777
4 жыл бұрын
Z31 Nation my check engine light turned on after installing a cold air intake and I have a P00BD code and a P2539 code could it be the same thing ? We did not unplug the batteries before unplugging any sensors and the company told us that was the problem
@jacobgrado6009
Ай бұрын
Thank you, sir for your knowledge. Great videos.!
@justinc8638
Жыл бұрын
Man, bro, I just want to thank you brother! that was a easy fix... I couldn't be more happier, You saved my ass!!! Definitely like follow and share! 😀
@bulletzhurt185
3 жыл бұрын
lately we have had a lot of the same thing come in the shop. the first one i figured it has a wire rubbed so i got my engine wire diagram and traced back the wires from the glow plug module and map sensor to the same fuse. i also noticed all the NoX sensors were on the same fuse. We always tape up the sensors pigtails underneath the trick to prevent this, but water got in and caused it to blow the fuse. easy fix, and just taped the pigtails up better.
@user-kp2ej6yu5h
6 ай бұрын
2016 ford 6.7 Ran fine after the getting off the expressway start jerking pulled over added transmission fluid Went home Next day did the same thing fluid still good scanned it mass flow sensor Replaced it , the next day driving good till it started slowing down no power said clean particular filter Then right away said service soon exhaust filter overloaded What in gods name
@TheTexasbro19
4 жыл бұрын
There's more to it than that. You're gonna keep popping the fuse if you dont fix the underling cause.the fuse pops because dirt water and salt get into the connector of the nox sensor, causing it to short out. You have to get under the truck and clean the connectors that are unplugged.. then Fill them with electric grease and wrap the connectors in something. I used a finger of a latex glove. Otherwise you're gonna keep having the same issue.
@DreamWorkAutomotive
4 жыл бұрын
I'm pretty sure I stated that in the video
@codyblack1498
3 жыл бұрын
where are those sensors located? 2013 f350 but no weight loss just severed connection... i cant find the correct connections to clean any help would be appreciated
@deannagramek7407
Жыл бұрын
Thank you for that! that is exactly the information I was looking for because I did this and it popped again of course and I knew there was an underlying issue I just didn’t know what it was or how to fix it. I’m new to all this. Thanks everyone
@deannagramek7407
Жыл бұрын
@@DreamWorkAutomotiveyou did but for those of us with zero knowledge we need it dumbed down for us 😉
@DonkeyHammer
2 жыл бұрын
Thank you, this video saved me a lot of money.
@leonelcotto6141
6 ай бұрын
Would a code p054f be the same ? Mine is a 2017 f-350 6.7 what fuse will it be in my truck ?
@sergeystasyuk1050
2 жыл бұрын
Thank you, I’m repaired 👍👍👍
@jeffreylacombe9319
Жыл бұрын
I have a 2016 6.7 Powerstroke (stock) 320k miles & throwing the same code and a P02E9. I have the #36 fuse but it's not popped but my rig is not deleted either. Your thoughts
@user-co1bi9tc6q
9 ай бұрын
Hey man I have a 2013 f350 with a 6.7 deleted but I have difficulty finding the fuse, I only have a fuse box in the passenger side and the engine compartment
@katrinasommer2634
4 ай бұрын
I have the same codes for my check engine light ! My fuse 36 was blown !! But question when jiffy lube deleted the code , after 1 drive cycle the light comes back on !!!! Help 🙏
@jonathanwilliams3226
3 жыл бұрын
I have a 2011 6.7 that has been deleted it has a check engine light came on a few days ago the boost gauge is maxed out at 40 psi and it cranks more than it should when starting the codes that it threw are P06A7 and p0340
@frt33twn
3 жыл бұрын
P262D code 6.7 Cummins any idea 💡
@tshay74
3 жыл бұрын
Thanks for this video 🙏🏼 I have p2074 code in 2019, this year is the same fuse number and location?
@amazing-j-towing-inc.business
Жыл бұрын
Did you found the location
@salvadorarreola4729
2 жыл бұрын
I have a 2012 F250 XL 6.7 with the code P00BD, I already check the fuse, and is all good, I check the Cool Side Intercooler, and has been changed but the check engine and same code still appear so I don't know if a MAF Sensor may be the issue, also after sitting on a Red Light when I accelerate to continue driving there is some white smoke, not a whole lot but noticeable. I was told that the truck has been deleted when I bought it, but I don't know exactly what was deleted.
@dustinholland2000
8 ай бұрын
Dis you ever find the cause of this code.
@ckrico9588
2 жыл бұрын
I have a 2019 f250 6.7 my #36 fuse is different it’s the box cap sensor and isn’t a 15 amp does my truck have a different # fuse, if so let me know please I’m having the same issue
@amazing-j-towing-inc.business
Жыл бұрын
Have you found out ?
@Tuff_Dawg_Kennels
Жыл бұрын
I wondered the same thing
@glennwhite5872
Жыл бұрын
Unfortunately the 2019 doesn’t have a #36 fuse. I have a 2019 F450 deleted for about a year now and it’s having the same problem you talked about…… I wish mine was this easy.
@user-ku8qf6ip3r
Жыл бұрын
Trace back the closest failed component code or condition code on a wiring diagram. Its a good place to start. Load testing or voltage drop testing would be a start.
@cobinmcswain2312
2 жыл бұрын
Problem solved thank you sir!
@bornhunter2885
3 жыл бұрын
Fuses are Amps not Watts Arnold.
@DreamWorkAutomotive
3 жыл бұрын
I corrected it in the description is it something I put out very fast to help out people so they didn't get screwed over appreciate your criticism
@larryphillips4164
10 күн бұрын
I can’t seem to find a 15 watt fuse to replace the number 36 spot with. Are these fuses custom made!?!? 🤪
@joshcrenshaw6603
3 жыл бұрын
You da man Arnold! Thanks
@DreamWorkAutomotive
3 жыл бұрын
Thank u
@JoshRolfe
3 жыл бұрын
Could this be the cause of a P0284 code? I have zero other symptoms no smoke no rough idle etc
@sammosher1812
4 жыл бұрын
I had this exact same problem a year into my delete and I had missed removing the front NOX sensor box and it accumulated crap in the plug which shorted out and popped the fuse. I pulled the box, greased and wrapped the remaining plug, and went on about my business. Now this fall I'm getting the damn P00bd code back (but no others and the glow plugs are working fine) when I'm running in position 4 & 5 on my tuner. Any help or advice would be greatly appreciated as there is very little help available, other than the official Ford troubleshooting which doesn't account for tuned trucks, on this subject.
@Jaiflo6101
4 жыл бұрын
Is this the same fuse problem with the 6.4 engine tuned and deleted?
@amazing-j-towing-inc.business
Жыл бұрын
I have the same situation but my truck is a 2018 f450
@archiejackson4900
5 жыл бұрын
Thank you so much for the info
@arthurcastaneda9969
3 жыл бұрын
Can you send me your address
@Elvergalargax
3 жыл бұрын
Your the best .thanks for sharing
@scottjones5254
6 ай бұрын
I’m getting code U0074 after I ran through the car wash. I have the same set up as the truck in the video
@DreamWorkAutomotive
6 ай бұрын
More than likely fuel rail pressure sensor
@scottjones5254
6 ай бұрын
@@DreamWorkAutomotive Thanks I’ll start there👍🏻
@DreamWorkAutomotive
6 ай бұрын
@@scottjones5254 if you need any other help you can reach me at unlimited power 638 gmail.com
@scottjones5254
6 ай бұрын
@@DreamWorkAutomotive I sure will. I appreciate your help. Thank you
@tigerbalmgaminghd3872
5 жыл бұрын
Make some more video's about the MK808. Great video's subscribed to your channel.
@frt33twn
3 жыл бұрын
P262D code any ideas 💡
@frt33twn
3 жыл бұрын
6.7 Cummins
@malcolmseawright9571
2 жыл бұрын
How P0341 crank no start 2011 f550 wrecker
@shainmccaughey2102
2 жыл бұрын
So if it doesn’t end up being the fuse what would be the next thing to look at?
@DreamWorkAutomotive
2 жыл бұрын
Just depends if you shoot me some codes I could possibly walk you through a diag tree to get to the issue
@shainmccaughey2102
2 жыл бұрын
@@DreamWorkAutomotive I’ve been getting the U0074 and the U0106 code as well as the glow plug light will stay steady illuminated
@DreamWorkAutomotive
2 жыл бұрын
@@shainmccaughey2102 my email is Arnold Garza 45 @gmail hit me up I'll give you my personal number
@noeramirez1095
Жыл бұрын
Do you still work?
@candidoruiz6752
2 жыл бұрын
Hey I have same issue I checked fuse and all good, could you point me in the right direction?
@scottlocklear2062
Жыл бұрын
Mine looked good also changed it anyway and cleared the codes and light never came back on
@Viewer899
Ай бұрын
Don’t charge for the fuse, charge for the diagnostic…
@brgracer100
Жыл бұрын
So what caused fuse to.blow. they don't go bad by themselves . You said you had over 2 hours into it . Why wouldn't you charge it and find the cause of fuse blowing ?
@DreamWorkAutomotive
Жыл бұрын
Rewatch the video I tell you exactly what happened to the fuse and why it blew All you have to do is silicone the wires that are hanging and make sure water is not get in there
@simple4494
2 жыл бұрын
So I put a new fuse in an it piped it again would you say blow out all the connections and try it again?
@DreamWorkAutomotive
2 жыл бұрын
Check the connections on the bottom where the NOS sensors used to be
@CCk2CamanoCarveKings
2 жыл бұрын
Did this work for you
@keithjohnson900
3 жыл бұрын
I need my 6.7 fixed mine has been deleted for about 7 months and doing a similar thing reading p0197 and low coolant I cannot find a fuse blown
@712gln
Жыл бұрын
Lol you looking for free diagnostic work
@ckrico9588
2 жыл бұрын
I have a 2019 f250 6.7 my #36 fuse is different it’s the box cap sensor and isn’t a 15 amp does my truck have a different # fuse, if so let me know please I’m having the same issue , my fuse box is also located under the hood on the passenger side behind the battery
@DreamWorkAutomotive
2 жыл бұрын
I'm out to dinner right now as soon as I get back I'll pop open my laptop and take a look
@isaacvaldez276
2 жыл бұрын
What was the answer to this post?
@amazing-j-towing-inc.business
Жыл бұрын
@@DreamWorkAutomotive any update ?
@michaelwarren2721
2 жыл бұрын
This didn't fix mine, glow plug light stays on and fuse keeps popping
@CCk2CamanoCarveKings
2 жыл бұрын
I'm having the same issues. It worked for 2 days then popped again an now it won't stop popping. Please let me know if you find what it is. Im getting underneath the truck today an taping up all the plugs.
@michaelwarren2721
2 жыл бұрын
@@CCk2CamanoCarveKings there are two plugs on the passenger side of the frame, unbolt then and unplug, tape up with electrical tape. They were supposed to be removed during the weight loss
@crashm1
Жыл бұрын
Why would you not charge for the two hours of time you spent on this job? You have two things to sell as a tech and that is knowledge and time. Every minute you don't charge for or lose through a lack of knowledge is a minute you'll never be able to make up for. It isn't your truck why work for free?
@keithjohnson900
3 жыл бұрын
And my truck will not boost and I have high EGT
@hilham89
4 жыл бұрын
I have quite a few questions if there is a way to get ahold of you maybe by email?
@DreamWorkAutomotive
4 жыл бұрын
Arnold Garza 45 at gmail
@hilham89
4 жыл бұрын
@@DreamWorkAutomotive that will work.
@huntinglegnon1638
3 жыл бұрын
What was the code? Was it P132B?
@huntermount3374
3 жыл бұрын
Did you find a fix for your P132B code? I’d appreciate any help!
@buddylegnon6201
3 жыл бұрын
@@huntermount3374 yes I did. Two fold problem. MAF sensor MAP sensor. Replaced both and no problems.
@albertotorresjr2013
2 ай бұрын
@buddylegnon6201 replaced with OEM parts? Reading forums, replacing with non OEM will still have the issue
@eddievasquez8034
3 жыл бұрын
Bro where you located
@DreamWorkAutomotive
3 жыл бұрын
Harlingen Texas
@eddievasquez8034
3 жыл бұрын
@@DreamWorkAutomotive i need to take my 2014 6.7 to you
@keeblertime1486
Жыл бұрын
You make it sound as if charging for your time is dishonest. It's not. Everyone should be compensated for their time. I'm not going to just charge someone for fixing a shorted circuit that took less than 10 minutes to repair and not charge them the for the 2 hours it took to find the short.
Пікірлер: 97