I don’t miss the jet noise. Once I did second gen swap it’s so much better.
@JimmyDs
4 жыл бұрын
Soooo, I got back to the US last month and bought a new 2019 3500. I will try answering anything about the 2017 as it comes and will put a video up of the new truck once I find a good company to get some compliant ✌🏼✌🏼 tunes.
@brentchurm538
2 жыл бұрын
Thank you for this video!! I scoured KZitem to find a delete pipe only set up as I was worried about the exhaust sound. I will be tackling this exact job in the next day or so. Very surprised, I may need a muffler!!!! LOL
@JimmyDs
2 жыл бұрын
Great!!! Glad you got an Idea. I would say if your towing and do not like drone then get a muffler. If not it should be fine. I like the muffler on them just to draw a bit less attention. Just my two cents.
@beyuwallace
Жыл бұрын
@@JimmyDs yes they make good mufflers. You need them after a delete. The jet is just really loud.
@mattmcdermott4766
3 жыл бұрын
How are you doing my brother? I have a 2012 ram and as soon as my warranty runs put, a tune on my truck and delete the soot cooker and disable the bs under the hood. What would you use? What did you do? Thank you for the great video. God Bless you my brother!!!
@JimmyDs
5 жыл бұрын
Hey Chad, no I have not. I only drove it around for two months then deployed so it has been sitting. If you were to get one tho it is very simple to clear any DTC codes VIA the Ez Lynk App.
@sticrzy123
5 жыл бұрын
Sorry I may have missed it , what delete kit did you use , did you do a Transmission Tune ? 68RFE ? Thanks good video sounds bad ass , I’m towing a 5th wheel RV too so I don’t want a bunch of Soot on mine either 😁👍🏼 Rather be Cummin than Powerstrokin
@JimmyDs
5 жыл бұрын
3Gunner sorry for the delay, i replied above.
@JimmyDs
5 жыл бұрын
Hey Gunner, sorry for the delay. I used a Flow Pro exhaust system and the EZ Lynk Auto Agent 2 tuner. Its very user friendly and easy to install. I have the Aisin transmission so there is not currently any tuning available for it that I know of. If you have the 68RFE there are tunes available as a package by most of the engine tuners, PPIE, Double R Diesel etc. hope it all works out for you brother.
@sticrzy123
5 жыл бұрын
Did you end up putting the factory airbox back on ? Thinking of putting a k&n in mine
@JimmyDs
5 жыл бұрын
3Gunner I did put my stock air box back on. I had a K&N drop in filter in it already. The only thing i did not like about the S&B was the turbo whistle. And to be honest the stock intake tube is bigger at the connection at the turbo.
@beardenfun
3 жыл бұрын
Great video! Getting ready to do my 14 Cummins just wondering did you just use the programs in the ez lynk or get them through somewhere else?
@jlestock789
5 жыл бұрын
What "T"-style are you going with? I regret changing my 8.4 Uconnect for the (not)Linkswell.
@chadyoak1633
5 жыл бұрын
You mentioned the north east, I’m from WV! Have you had any check engine lights come on?
@JimmyDs
5 жыл бұрын
Chad Yoak, sorry tapped wrong area. I replied on the main area.
@JimmyDs
5 жыл бұрын
Update!!!!! So the 2017 3500 down pipe only has a flex coupling no cat so its already straight thru, save your money on a down pipe!!!
@gordo870
4 жыл бұрын
Hello Sr , very Nice video , i hope you have chance to ask a question about the amp research powerstep with the ezlink tune , i have the ezlink tune already installed in my 2014 dodge ram 2500 and im traing to get the amp powersteps but im not sure if i should get the plug and play or the manual wired conector , because for the plug and play you need to add a pass thru harness to be able to have plug the ezlink and the amp research at the same time and i heard that that can cause some trubles with the ezlink , i hope you can have chance to anwer my question
@JimmyDs
4 жыл бұрын
Hey Gordo, so you are 100% correct you can get a pass thru but the chance of messing up the ez Lynk connection is there. I have the manual wired and it is not at all difficult to install. The instructions were very much straight forward and simple to understand.
@gordo870
4 жыл бұрын
JDODGE Thank you very much Sr , you help me a lot , and wll see how good i make in the installition . Have a good one
@tuenviogtcom3170
2 жыл бұрын
i want clone my ecm i want buy 2con ecm junk yard n tune n delete def adblue its possible? with ez lynk?
@JimmyDs
Жыл бұрын
I don’t know if that is possible with this sort of tune but I’m sure some computer smart person knows how that all works.
@hendrik1636c
2 жыл бұрын
Links to exhaust
@stephengriggs6866
4 жыл бұрын
What makes it have the loud turbo sound ? I've heard some that just sound like a big truck but like the whistle of your truck.
@josephsaizon9494
3 жыл бұрын
The vanes on the turbo close and give it that hissing/whistling noise, when the vanes open it gives it the rumbling noice
@brucebroeking1570
5 жыл бұрын
Do you have a 3" lift or just a leveling kit? What gears does your truck have & what mpg do you get with the 35s empty & towing? Thanks
@JimmyDs
5 жыл бұрын
Bruce Broeking I only have a leveling kit. It took minor plastic trimming but nothing crazy. I have the 4.10 gears with the Aisin. I only drove it a month prior to deploying but was getting around 16-17.5 mixed city highway. I did not get to tow prior to leaving but would expect a bump from the 8-9 i was getting pulling my fifth wheel.
@mattmcdermott4766
3 жыл бұрын
Next, get with Gale Banks with the pedal monster. It will liven everything up. You don't have to mash your pedal then let up to get rid of the sluggish feel.....
@keith2860
3 жыл бұрын
I’m pretty sure with custom tuning they can boost throttle position if desired.
@nolefishatgmail
4 жыл бұрын
Just deleted my 2014 3500 with ez Lynk and got my tunes from CTT out of Canada
@policronia
4 жыл бұрын
Karry Kimbler - where is CTT in Canada? How is the customer service?
@chrispitts9010
4 жыл бұрын
What tunes you running ?
@919lxzxro2
2 жыл бұрын
Did you unplug your egr connections?
@nathangarza4974
5 жыл бұрын
Are you supposed to tune it before or after you take off the stock exhaust system?
@JimmyDs
5 жыл бұрын
Nathan Garza I would suggest you tune it prior just to make sure it all loads properly before you do the work to take off the parts. There is really no issue doing it before or after.
@RedskinzFan
3 жыл бұрын
How did you do that airbag gauge
@JimmyDs
3 жыл бұрын
I took the plastic housing that comes with it, got a hole saw the same size and drilled a hole on an angle that you want the display to sit. I used plastic epoxy to glue it in then a thin layer of bonding, primer and paint.
@tkc2995
3 жыл бұрын
How are you reading egts?
@nolanfeller
4 жыл бұрын
Obviously
@worldbyjay
4 жыл бұрын
You having any issues with the tune and aisin? Looking to delete mine, hearing anything under a 45hp tune will keep any de fueling issues from arising in shifts. Please let me know if you see this
@JimmyDs
4 жыл бұрын
Jay Kycia , Im currently deployed in Afghanistan so have not had a chance to drive it much yet. I will be home in a month and start updating you guys on all the details. I did have a defuel issue pulling a trailer up hill on the 60hp tune but never dug into it since I was leaving to come over here. I will def let you know as soon as I get in it.
Пікірлер: 44