Every time my dealer shoots me a good deal on a powerstroke, i come to this channel. Then i buy a cummins.
@vasiliydron
6 жыл бұрын
Jay Farmer lol
@Mikael5732
6 жыл бұрын
Jay Farmer LOL, best comment
@RobertSmith-le8wp
6 жыл бұрын
Jay Farmer yep. He goes over way more problems than I would be comfortable with.
@Spahi77
6 жыл бұрын
Lol
@blakman41
5 жыл бұрын
And a extra transmission to go with your new Cummins.
@MrJack9mm
6 жыл бұрын
Bill I think your starting to loose it! You may need a vacation away from that sweet smell of diesel exhaust. ;)
@clittle1559
6 жыл бұрын
I read your comment prior to the end of the video i thought to myself whats this dude talking about "o the love of a diesel "
@ripjones5294
6 жыл бұрын
Diesel exhaust = drug -- Who knew ??!!
@Mikael5732
6 жыл бұрын
The more I hear of this complicated crap of powerstrokes, the more I love my 7.3 IDI
@ASPEDBUSDRIVER1
5 жыл бұрын
@@Mikael5732 i love how 7.3 idis sound idling
@justacajun90
6 жыл бұрын
The more and more vids I see from 11-14. I’m SOO GLAD and BLESSED to have bought my 2015. Yes I have had issues where I needed whole new engine (thank you warranty) but since then, no issues *knock on wood* I’m glad to know that 15 and newer are nearly bug free!! BUT! I still watch these vids so I know what and where to troubleshoot Thanks Bill! You’re AWESOME
@Chopwoodcarrywater
5 жыл бұрын
Great channel. Been watching for over a year. Just bought my first powerstroke 2015 6.7 120k miles driving it home from Dallas right now
@michaelswiger4006
6 жыл бұрын
Talk to the motor lol you crack me up man
@michaelswiger2341
6 жыл бұрын
michael swiger im the real michael swiger 😂
@ilikeboost4764
6 жыл бұрын
Nope y'all are both fake
@vivillager
6 жыл бұрын
Ask her if her sister's single? Never thought I'd cheat on my Cummins....
@brianladyman6426
5 жыл бұрын
Thanks bro. You are the reason I am changing to Archoil in all of my vehicles.
@powerstrokedude993
5 жыл бұрын
I own 2016 F250 XL 2 wheel drive 6.7 liter power stroke diesel. Don’t know what you guys are doing to your trucks but mine runs like a champ. Full delete. Dual bypass filters. Oil cooler. Get my oil analysis don’t every 10,000 miles. (I have 58,000 plus miles on her)Pull a 12,000 lb fiver through the mountains of Tennessee. Doesn’t burn oil. Run 0w40 100% synthetic Amsoil diesel Signature series. Have a tow tune and a Looney tune from Quick tricks out of Florida. Get 14-15 miles a gallon while towing and 21-23 miles cruising with my looney tune in the city and highway. Nice😎Built Ford Tough! Remember guys and gals, it’s all in the way you maintain your diesel. Never neglect your truck no matter what your make. Love your vids👍🏻
@outdoorhobbiesfarmmachiner5218
6 жыл бұрын
We need more people like you Bill . Who will do anything to make sure that your customers and KZitem watchers are taken care of where other dealerships will basically beat around the bush
@allancorsie
6 жыл бұрын
brandon rogers i
@reverwashington5252
6 жыл бұрын
Thanks for the power stroke knowledge Mr Bill. You are the reason I still have a 2005 6.0 keep putting up videos about 6 7 one day I might upgrade once you show all the bugs and problems thanks for the videos
@lightningsmokerXx
6 жыл бұрын
This was a great video. Thanks Bill. It really is true, never buy that first year or 2 of any production model unless you are flush with cash. Best to let the bugs get worked out.
@outdoorzone
6 жыл бұрын
Great info!! And thanks for supporting veterans brother!!!! I am one of them as well!! That’s one reason why I subscribe to your channel last year!
@OpenAirAdventure
6 жыл бұрын
And that's why my new truck is a gas 6.2. I've been down this diesel road.
@shanemccarter9055
6 жыл бұрын
Shackles with u on that I got the 4.30s with it and love it
@drewhansen429
6 жыл бұрын
Lol good luck......
@RobertSmith-le8wp
6 жыл бұрын
Yep, modern gas engines seem to be much more reliable. I have a 2005 Silverado 5.3. In 175,000 miles the only thing I've ever replaced is the water pump. I prefer GM V8's because they use what works. "Old fashioned" cam in block, cast iron block, etc. The water pump itself was only 4 bolts and took less than 1 hour to replace. I don't have experience with modern Diesel engines, but I owned a 1992 Dodge Ram 3500 dually. It had the Cummins and a manual transmission. I don't recall doing anything to that other than changing the oil
@LightningRich00
6 жыл бұрын
Just gutless and turning 5k rpm's to pull 10k up a hill. There are trade offs.
@alexmatthews2332
5 жыл бұрын
@@RobertSmith-le8wp Simplicity is the answer, ive got a 24 valve cummins and the only other diesel truck i would buy is another cummins. I have a 7.3 and its good but its no cummins...
@ehrenkrause9861
6 жыл бұрын
That's why I'm still rolling the 7.3. Bought it 3 years ago with 142,000 miles on it and I'm now 223,000 miles. With original injectors. Oil changes are religiously changed every 3,500 mi. And archoil to top it off. Still stomping the throttle @ 18 mi per gal. It's the most reliable truck I've ever owned. Its a 2000 superduty.
@chadwickyzf
6 жыл бұрын
Update on your personal 6.4 truck please Bill. Still some 6.4 guys out here wanting an update !!
@wysetech2000
6 жыл бұрын
I think he sold it a while ago.
@AmericanHandgunner44
6 жыл бұрын
A big problem with making a good design is the penny pinchers who want to cut cost of the design as well and force the use of bad components. The engineer isn't stupid but he is forced to change a design to cut costs as well.
@70ss8
6 жыл бұрын
Very cool Bill, I like your diplomatic approach. Good job explaining it! Thanks
@FossilCleric
6 жыл бұрын
I bought a not bulletproofed, 05 6.0L, did some research and right away added a EGT probe and have been monitoring it. Pulling a 20ft 10k enclosed trailer I see EGTs around 1000-1100 and ECT's creeping up close to 205. this is around town towing. Planning a round trip from Salt Lake to Sacramento to pick up a Jeep. I'm just not sure what temps to be afraid of. There are a lot of long climbs and I really don't want to break anything. Thanks for your time. Neil
@chefmatthammerschmidt8408
5 жыл бұрын
Bill, my dear friend, I have been wondering since the day that you released the video of the first look at the Powerstroke 3 liter when you plan on doing a series about that. I would love to see the inside of one of those engines.
@anthonysoza1645
5 жыл бұрын
Bill Hewitt. Definitely a pillar to the Ford community.
@Thebipolarachiever
2 жыл бұрын
Bill, you’re talking to the engines 🤔🤙 thanks for the info
@digitalrailroader
6 жыл бұрын
this lack of parts was also a problem for the light duty 2015s, I have seen on the F150 forums that owners of crashed trucks have waited SEVERAL MONTHS for bedside skins to come in to fix their trucks because every bedside skin that ford was stamping out was going straight to the production lines and none were being allocated for the parts network.
@thetexaspitbull
6 жыл бұрын
Straight to the point good or bad very unbiased NO BS... 100 thumbs up
@Tdaz250
6 жыл бұрын
Love these explanation videos. Thanks bill.
@swabbster3
5 жыл бұрын
That valve failure is generally caused by a broken glow plug in the first 6.7's tip breaks off the glow plug, there is tons of info online about it and updated glow plugs.
@michaelking550
6 жыл бұрын
Between Ford cam Shafts & Ford Cylinder heads, I think , I wanna become a Chevy man... lol...
@ArizonaCowboys
6 жыл бұрын
She is going to love that archoil
@davidshowalter5808
6 жыл бұрын
My 2013 has 81,000 miles on it only one small oil leak that Ford fixed under warranty love that 6.7 liter
@chrisdidomizio4958
6 жыл бұрын
I still don't know why Ford and GM insist on building high revving/high horsepower V8's versus a Low-revving/high torque Straight six and using an aluminum head. Aluminum heads are cheaper to cast and machine, but are more prone to cracking and dissimilar metal corrosion(more frequent coolant changes). Damn the engineers.
@fk4515
6 жыл бұрын
to meet CAFE standards.
@tyrrellroach5872
6 жыл бұрын
The Cummins uses an aluminum head as well and has since the 96 I think.
@Mikael5732
6 жыл бұрын
With you there bro. Inline 6. Balanced engine.
@famjbgernaat
6 жыл бұрын
I,am from Holland (Europe) but here every car has a aluminium cylinder head for the past 20 years. No problems whith it
@jimmy_olds
5 жыл бұрын
The Road Warrior in theory, it’s packaging.
@hummincummins5413
6 жыл бұрын
Why didn't they just pick an engine like the 7.3 or 6.0 and just keep making improvements to them and bringing them up to emissions standards. Creating new engines every couple years doesn't seem to work for them.
@blindabinda1234
6 жыл бұрын
Hummin Cummins all the other engines were designed by other companies. The 6.7 is a Ford engine and I think they are trying to make the engine themselves now so they can dial in there own product. I think one they get the bugs out of this engine they will have one of the best engines. Did you know the exhaust and intake runners in the heads are reversed? The exhaust comes out of the top of the head keeping all the heat rising.
@sergeantspeed5941
6 жыл бұрын
Outsourcing the motor was cheap and problem free. Until the 6.0 now they're starting from scratch. Not sure why they keep changing
@Midnight_Rider96
6 жыл бұрын
Emissions and power
@kevinpezza6684
6 жыл бұрын
They’ve had the 6.7 for almost 8 years now
@skylinefever
6 жыл бұрын
Engines produce a certain amount of smog within the cylinder, and the more smog in the cylinder, the greater the need for more smog filtering equipment in the exhaust system. At some point better smog filtration isn't enough for the next EPA and CARB smog test, so the manufacturers have to develop another engine that makes less smog within the cylinder. In addition, some of that extra smog gadgetry kills horsepower. To get an idea about an engine having less horsepower due to smog equipment, just analyze the performance of Corvettes from 1972 to 1980. Some cars had to be cancelled due to engines that couldn't be made smog legal, one example is the Mazda RX7 Twin Turbo. It was only sold in the USA from 1993 to 1995, but was sold in other countries until 2001 or 2002. A Mazda RX7 would never be complete without a rotary engine, and those are very difficult to make smog legal, so that is why it was cancelled in the USA. There are, however, many instances where engines can have incremental improvements and stay in use for a very long time. The GMC 6.2 diesel was introduced in the early 1980s and over it's production, it was increased to 6.5 liters, given a turbocharger, given a computerized injection pump, and the last one was used in 2002 in the GMC Savanna van. The Cummins 5.9 also underwent several changes, and although the 6.7 Cummins has a different engine block from the 5.9, it still shares a large number of components. Volkswagen introduced a 1.9L diesel during the late 1980s and it was a non-computerized engine with prechambers. In the late 1990s, they went from a prechamber design to a direct injection design, and the mechanical distributor pump was modified to work with a computer. The block from the 1.9 non-turbo mechanical injection engine changed very little when they made a direct injection engine from it. In 2004, VW was forced to change the design because a computerized distributor pump couldn't meet smog requirements, and so they had to create the Pump Duse engine. I could bring many gasoline engines into this discussion, but it wouldn't as relevant since this channel focuses on diesels.
@56hueycobra
6 жыл бұрын
Thank You 🙏 Bill For All the Information On the Powerstoke Diesel Engine and the 6.7 L Powerstoke Diesel Engine Too Sir 🇺🇸🇺🇸🇺🇸 Have a HAPPY 😃 4th of July Bill, Dana, & Mike 🇺🇸🇺🇸🇺🇸
@KendrasEdge757
6 жыл бұрын
Hey Bill, love the videos, I’ve, like most, have learned a LOT, and continue to, from you and your vids. Quick question....I bought my first diesel in September of last year, a 2015 F250 SD 6.7 and have had no issues, knock on wood, but wanted to ask you something.....my truck has 29,400k miles, should I invest in an EGR/DPF delete? I was told it wasn’t needed in the 2011+ 6.7’s, but wanted to ask a pro what he thought! Anything else you’d recommend that I should do to my truck?? Thanks!
@simonyovino2126
6 жыл бұрын
Bill, you're great! Love the videos.
@MegaMarclar
6 жыл бұрын
I came to your channel to learn more about powerstroke engines, definitely learned a ton. if you compare the cummins 6.7 to the ford, it seams like the ford engines are way more difficult to work on, and have a mass of parts attached.. Wondering why ford doesn't simplify their designs...
@fredtflail
6 жыл бұрын
A part that goes to engines under warranty if there is massive issues with the part it usually drives the cost down so they are not paying dealer mark up
@hdz12ez
6 жыл бұрын
Good video and excellent explanation!
@inthewoods5640
6 жыл бұрын
I don’t pull that hard but I was contemplating a F250 6.7L. I ended up going with a Toyota Tundra Basically because the truck hasn’t changed since its infancy And it’s damn reliable!
@WeRide4Snow
6 жыл бұрын
So i picked up a 97 f250 with 75k miles. So far it has a ts 6 position, s&b cai, 5 inch exhaust, edge insight, and a stage 2 ats trans. Im wanting to do a 500hp build on it and im not really sure what to get for parts. And will that stage 2 trans hold 5 or 600 horses?
@carlindoak900
6 жыл бұрын
please make a video on 7.3 mpg and what can cause bad millage. ex bad injector seals and stuff like that
@fightfactory67
6 жыл бұрын
Hello again, Bill. I tried multiple times to contact you via phone or your email. No luck..... Can I schedule an appointment? I got a 2005 Ford Excursion with 6.0 powerstroke. Original 70,000 miles. Nothing wrong with it, but I’d like to dealerproof it. Can I? I keep calling and calling and leaving message after message, but nobody ever returning my calls. I sent you email like you told me-4 times. No luck either.
@snafu720
6 жыл бұрын
Call Dana @ 404-538-4271, He'll do all the scheduling and pricing for you.
@Pilotdude3407
6 жыл бұрын
I had to call twice as well but Dana called me back a few minutes ago to schedule my appt so it is possible. Best of luck getting through.
@dynaguy209
6 жыл бұрын
Wow that’s awesome customer service for ya right there. Way to be professional Bill 👎🏼
@hpkntnw
6 жыл бұрын
Fight Factory I’m pretty sure he stopped doing 6.0 dealerproof. He had a sale on remaining 6.0 heads around Christmas.
@ryanhaverkamp4404
6 жыл бұрын
DynaGuy 209 do you know how busy he is? Dumbass
@xBugitax
6 жыл бұрын
I have a 2011 6.7L with 143,000 miles. It’s been good to me so far. Is there a EASY way to have my valves inspected to see if they could be a problem? Is so, should I?
@wadebearden2009
6 жыл бұрын
Replace glow plugs in the 2011s. The tips break off.
@OpenAirAdventure
6 жыл бұрын
Nicholas Enterline sell it
@leroygreen1877
6 жыл бұрын
Fords biggest mistake with the 6.7L is making non-interchangeable heads.
@gasparcalderon666
6 жыл бұрын
These are the types of videos I look forward to!!
@rubberhamburger
6 жыл бұрын
Bill you should change the name of your channel to “Come brag about your Cummins” cause that’s all these comment sections are for
@n10cities
6 жыл бұрын
Your remark about not buying an early version of a vehicle is kinda like working in I.T. and not buying the version 1.0 of a software package. You wait for version 2.0 and beyond in hopes that the vendor has worked out most of the bugs. Sweet-talk that motor, Bill! I agree with Jack Reynolds, too! LOL Maybe time for a vacation!
@dominicdemicoiii402
5 жыл бұрын
bill, could this been caused by the faulty glow plugs in 2011?
@Pyro4100
6 жыл бұрын
bill we have a 2013 F-450 6.7 and the dealer had to completely replace the motor at 48000 miles not more than 4 months ago they said there was a pinhole in one of the Pistons what do you think based upon your experience
@stevenruble3934
6 жыл бұрын
Historically Ford has rushed Diesel engines into production since 2003. It’s upsetting it took them 10 years for them to make a decent engine. I think leadership was the problem.
@jeffforbess6802
3 жыл бұрын
Been thinking about a 250 to haul a travel trailer. Kinda leaning towards the Godzilla, because of starting cost ($80k, whew!) and upkeep. Had a 6.0 excursion, which I sold before problems might have started. At this point, it looks like one should only buy a diesel if it’s your work. What do y’all think?
@jasonman1515
6 жыл бұрын
So Bill, what is your suggestion to the people who have these motor/trucks and have the same issue like you have hear. where parts now are supposedly getting harder to obtain. what do you suggest. sell the truck or find another used motor out of a junk yard, etc.
@joshuawalters7835
Жыл бұрын
My 2016 f250 just had this issue. What a nightmare
@chersey.3579
6 жыл бұрын
how are the 2013 6.7 do they have any issues or short comings??
@williamsquires3070
6 жыл бұрын
It’s not just hardware that has this problem, software engineering also suffers from the “you just don’t know” problem; maybe even more, since the software has to run on a physical computer (hardware), connected to the other stuff (engine, tranny, dashboard instruments, and who know what else) and all it takes is one little intermittent hardware problem to throw a wrench into the works (i.e. discover a hidden bug in the computer programming) that could lead to tragic results. There are no “simple” solutions. Way to tell it like it is, Bill!
@johncox1983
6 жыл бұрын
Lol. Funny ending. Love your videos!
@EarlSinclair97
6 жыл бұрын
Love Bill's Whiteboard videos. Class is in session.
@Primer2toneGarage
6 жыл бұрын
Lol, the end had me rolling.
@mharrison1325
3 жыл бұрын
2011 was the only year we saw valve issues in the dealership shop, in my experience anyways.
@greenwaylawncareandlandsca2961
6 жыл бұрын
You crack me up! I should talk to my 6.7 like that!
@jimmyg197
6 жыл бұрын
Hey I was just wondering if you have ever heard this my friend has an 05 Ford with a 6.0 motor and he had changed the oil too synthetic oil the high synthetic and it started a small skip and a mechanic told him that you could not run full synthetic in that motor that you had to run regular motor oil in that motor so he changed the oil and it quit skipping have you ever heard of such things like that????
@Jeffreykum
6 жыл бұрын
Why buy a 6.7 ford diesel and pay almost $3 a gallon for diesel fuel and get 19 mpg and pay big bucks too fix or repair it?
@Spahi77
6 жыл бұрын
Jeffrey Kumjian because you look cool...lol
@thomasbradley7844
5 жыл бұрын
Pull a heavy trailer around awhile in a diesel then do it with a gas motor and you will answer your own question
@fk4515
6 жыл бұрын
I somewhat disagree, look at the Ramber V-8's, they didn't have the time to thoroughly test the new engine so they used forged cranks and rods, they were over built. Some of it is cost engineering, they need to make the specification but also need to make that spec at the lowest possible cost. Some of it's quality vs production, meaning on the pilot line they're okay but when they ramp up to full production they fall out of control or the ability to make or assemble parts that meet the specification. Yes there is the feedback loop that you talked about where the more units in the field equates to more knowledge about the product vs customer expectations.
@samhinkle2356
6 жыл бұрын
What can you do to prevent these failures I own a 11'
@supergrendel
6 жыл бұрын
Mmmmmm the thought of titanium valves. Come on Bill this should be standard in your dealerproofing kit!
@stephenfarynaz7229
6 жыл бұрын
that outro tho, im dead...lolllll!!!!!!!!!!!
@sarge1134
6 жыл бұрын
That ending was gold
@ACDC5540
6 жыл бұрын
Damn bill ur a good teacher
@ronsimms6530
4 жыл бұрын
Hey Bill, do you know which month manufacturing date they made the changes on 2012? My manufacture date is 6/12
@beinggrownupsux8040
4 жыл бұрын
I used to know the exact date when I owned a 2011 6.7. They changed the heads in March or April of 2011. So your June 2012 pickup has the newer heads and glow plugs. Only common issue a 2012 will have is the turbo bearing going out cause they’re still the ceramic.
@hershelr.sullivaniii7139
6 жыл бұрын
I've honestly been stalking this youtube channel, wanting more of my weekly dose of Bill. Get us a 'trucks for sale' video this week, por favor. Oh, you said you were moving in the 7.3L core video. Where to? Bigger facility?
@defekticon
6 жыл бұрын
Was the glow plug broken in that cylinder?
@ColdSmokes
6 жыл бұрын
"We're not dealing with Military Aircrafts here". Painfully honest!
@briangoetz65
6 жыл бұрын
i love your attitude
@natehawkins2910
4 жыл бұрын
Deleted and tuned? Romped? All three??
@Mikael5732
6 жыл бұрын
Bill, I know you have your hands full with powerstrokes but have you ever considered doing some IDIhelp.com? I drive a 7.3 idi f350 and it does quite well. Not a speed freak I am.
@nothinglikeaford
6 жыл бұрын
2 thumbs up, and i very much agree with you. "ANY" new make and model car or truck is un-tested. they make it and you buy and test it. they get feed back from customers and do recalls or changes to make it better. same goes to almost every new product.
@carlbarnes4293
6 жыл бұрын
Does anyone know why the 2011 up trucks ride soo much better than the 2005 trucks?? Front end and parts look identical, but there is a distinctive difference in ride quality.
@workingshlub8861
6 жыл бұрын
i saw a documentary on toyota years ago...they only produce just enough parts to meet demand ..think it was called lean production. more focus on quality of the part rather than quanity...less chance of defective parts getting thru the line.
@Raging2inches
6 жыл бұрын
What common problems do you see with the 2017-2018?
@TheSavanto
4 жыл бұрын
If going to Cummins buy a few transmission and head gaskets.
@wyattlarrick3246
4 жыл бұрын
@@TheSavanto Just get a truck with an Asin, and stay away from the redline and you're good.
@theq4602
6 жыл бұрын
"There are people out there who can break an anvil." The old phrase I heard was: "He can break a piece of railroad iron with a rubber mallet". And 35K isn't much. I've seen people pull 35K with the OLD idi 7.3s and their ZF-5s...lol but when they try it with the E4OD parts fly.
@ozzstars_cars
6 жыл бұрын
Makes me wonder what the manufacture actually does know about failures that will occur out of warranty.
@raymondcruz2000
6 жыл бұрын
the best part is when they have a fix but have a shit ton of outdated parts that they still run through the pipeline before they start to move the updated part. they have to deplete the parts supply. same thing Cummins did with their 8.9 isl-g. they knew they had aluminum piston failures but still ran the aluminum till all the stock was depleted then they switched to the steel piston.
@alphonsotate2982
6 жыл бұрын
WOW THAT'S MESSED UP
@charlesnostrand3620
3 жыл бұрын
Why is it that that piston and cylinder head is always destroyed in the same spot every 6.7 engine u have.
@charlesnostrand3620
3 жыл бұрын
Is is the cracked intake port as well which leaks a lil bit of coolant when it warms up and you will never know till it burns up the head and piston
@DavidDallas3343
6 жыл бұрын
Everytime I watch this video I Come Away with a smile knowing that yes I did buy a ram but I rather deal with transmission issues down the road then with diesel engine issues up front it's amazing how people that watch these videos continue to keep on buying Powerstroke products knowing everything that bill says and that you're going to have issues before 200,000 miles that are going to require you to spend thousands I have a 96 Ford F250 with 283000 miles on it a 5.8 351 Windsor leaks oil burns oil 2 quarts a week easily 3000 Miles every two weeks put on it and runs 10 hours a day driving and idle time not one valve cover or oil pan off the truck still even has the original transmission amazing how 20 + years later the quality has improved but major issues still persist with the power stroke before 200,000 miles my 7.3 had six hundred and twenty-three thousand miles and 3 Transmissions but the motor still ran great why can't Ford build a quality product like that smh
@OpenAirAdventure
6 жыл бұрын
If you can build a strong engine , and apparently you can , why can't ford build them?
@oscarutrera9829
6 жыл бұрын
Always good stuff.
@alphonsotate2982
6 жыл бұрын
great show
@kevinpezza6684
6 жыл бұрын
You are fucking hilarious 😂😂😂😂😂😂😂😂😂😂😂😂
@onemeangreen
6 жыл бұрын
No casting numbers?
@ghostking0019
6 жыл бұрын
Him talking to the motor like it's a chick lol
@juanfo7307
6 жыл бұрын
John Sigler more like a pimp hustle
@jaystoner9475
6 жыл бұрын
How many chances do we give Ford? I'm done.
@FredFlintstone21
6 жыл бұрын
Turned into coco puff at the end of video lol
@Mikael5732
6 жыл бұрын
FredFlintstone21 yeah, a little cuckoo to say the least.
@alexmatthews2332
6 жыл бұрын
Bills a good guy lol ive never met a businessman that isnt a little eccentric myself included.
@andrewjacobson556
3 жыл бұрын
That would look nice in my obs!!🤣
@mauikawi4290
6 жыл бұрын
why are power strokes consistently garbage and in need of a whole new engine, cranks/pistons/valves,what ever..... cummins 6.7 NEVER a problem. they tow the same so I don't understand
@pauliegualtieri4314
6 жыл бұрын
I honestly don't understand why anyone would spend $60+K on a Powerstroke equipped truck when for the same money could have a tried & true Cummins....extreme brand loyalty I guess...?
@jasonstuck7080
6 жыл бұрын
Trust me, 6.7 have A LOT of problems
@ryanhaverkamp4404
6 жыл бұрын
Cummins are junk
@alexmatthews2332
6 жыл бұрын
@@ryanhaverkamp4404 🤣🤣
@skylinefever
5 жыл бұрын
I thought the 6.7 CTD had turbochargers that couldn't take the heat.
@gabrielalvarez477
6 жыл бұрын
Fuck yeah shes is so pretty!!
@alphonsotate2982
6 жыл бұрын
Can you put a old cat 6 or cummins in a ford.
@trevorsteele2841
6 жыл бұрын
Hi bill how’s it going?How’s spot doing ?
@tommysantos1658
6 жыл бұрын
Why did Ford stop the 6.0 if they refined it
@joeinmi8671
6 жыл бұрын
More ford junk. They let their customers pay top dollar AND do R&D for them. Ever hear of these failures with a cummins or duramax? Shit CAt doesnt even have issues with crap like this and I'm no cat fan... However I appreciate your videos bill. Thank you.
@w.j.5973
6 жыл бұрын
Wild Bill!!
@falunbrick
6 жыл бұрын
Common issue with 2011s, doesn't happen on the later ones
@iamarillo2
6 жыл бұрын
Why not dealerproof mod?
@gentilejoshsaved1646
6 жыл бұрын
I love ford guys they always say they fixed that in that year. In 2020 they'll say they fixed that problem. Why can't someone just admit they are junk. Shame on ford
Пікірлер: 200