Wow...I never knew that this was that complicated.
@mode1charlie170
3 жыл бұрын
A pressure compensated flow divider would work as well.....
@MentoredEngineer
3 жыл бұрын
Yes, a pressure compensated flow divider, such as the one below, would do the same job as a gear style flow divider except it is in a cartridge valve form. www.sunhydraulics.com/model/FSCH,
@impactodelsurenterprise2440
3 жыл бұрын
You missed out the trusty cheap spool flow divider.
@depayton1979
2 жыл бұрын
Engineers always do It the hard way
@VenganceLabs
12 күн бұрын
There can be issues with the accuracy and retiming in a cylinder application.
@zachcooper6955
Жыл бұрын
Great video. I am trying to make a custom press brake and am having this issue. In the routing in double rotating cynlinder section; wont this create three independent 'systems', one from the power source, one between the two cyl., one seemingly drawing from the dump tank? How would you accurately bleed the middle system connecting the two cylinders and can you draw from a dump tank? Thanks!!
@MentoredEngineer
Жыл бұрын
@zachcooper6955 This is difficult to discuss over KZitem. Please sign up for Office Hours or schedule a time with me at the links below. mentoredengineer.com/product/office-hours-with-corey/ calendly.com/mentoredengineer/brainpicking?month=2023-01
@Dstonephoto
2 жыл бұрын
Dat life jacket tho 🏊♀️ 🚁 🤿
@atharhaider44
2 жыл бұрын
Hi, We've a rotary (gear type) flow divider in our cylinders but still these cylinders move with different speeds. What could be the solution for this?
@atharhaider44
2 жыл бұрын
There is more time difference in the movement of both cylinders
@MentoredEngineer
2 жыл бұрын
Do you have a schematic and the loads on each motor? Look up my contact info at mentoredengineer.com to send the information
@sridharsudharshanam4157
10 ай бұрын
Hi Sir, Can i get 3 cylinders sycronizing
@MentoredEngineer
9 ай бұрын
3 cylinders can be difficult. If you can't mechanically tie them together, I would try to meter the flow out of each cylinder with a flow control valve. After that, you will need to add some sort of electronic control system that measure the stroke and then changes the flow of oil as needed. I'm facing the same challenge right now, but with 10 cylinders all having varying loads.
Пікірлер: 14