This is perfectly timed, Yorkie, I've got a GT Omega PRIME arriving any day now! Can't wait to put it together and I'll definitely be watching this back as a refresher at the time.
@Yorkie065
2 жыл бұрын
That's awesome! Just pay attention to the tips, take your time and be patient, and you'll enjoy it. It's very rewarding when it is all set up properly and a lot of fun to race in.
@BoleDaPole
2 жыл бұрын
Hell yea, that racing seat alone will shave precious seconds off your lap times.
@ElDuderinoAus
5 ай бұрын
A handy tip to avoid scratches, is use black electrical tape on surfaces that will contact each other. You can trim afterwards once you've finished adjusting. ;)
@virtualapex5914
2 жыл бұрын
Thank you for the insight and all the tips. I will make sure to come back to this video once my new rig arrives!
@WalterBurton
2 жыл бұрын
Thanks! Of course, I just blew out my bag lugging a leaf blower up and down my ravine. Perfect timing! lol
@MrCeeMusic
2 жыл бұрын
Great timing Yorkie, My TR80 comes friday!
@aqulex84
2 жыл бұрын
Haha I k ow the struggle so we'll. Got a TR160 for about a year now and with every piece of upgrade in gear I need to readjust many things.
@Yorkie065
2 жыл бұрын
Yeah, it is a mental thing with taking the right approach. If you go into it with some patience and not rush things, it's actually a hell of a lot of fun building and adjusting these rigs. They can get a little frustrating a times though if you want to do something quick lol
@aqulex84
2 жыл бұрын
@@Yorkie065 yeah that's right. And they can get heavy if you're adjusting some part alone with gear in it because you want to do it "quick"
@Yorkie065
2 жыл бұрын
Oh god yeah!! I've had to pull my rig back and out of it's spot for the next video and I am dreading having to push it back. Wasn't so bad to pull it out, but pushing it back into its previous position is going to be difficult.
@aqulex84
2 жыл бұрын
@@Yorkie065 yeah i feel you.talked about that struggle.in my video about the tr160 as well. Would be useful to put it on casters but I don't like the look of casters at all 😅
@nidiotskap3317
2 жыл бұрын
Just started building my TR80 and I’m missing two profiles needed for the seat. Hope TrakRacer gets back to me Soon
@HANNON1066
2 жыл бұрын
Just got mine… I’m missing the same parts did you get them in the end..
@alexanderjennison3841
6 ай бұрын
I have a mk4 TR80 and I'm struggling to set up the pedal tray. It's the same as the one in your video. The part I am struggling with is getting the aluminum extrusion onto the hinge piece. It seems like it wants a bolt in the center hole of the extrusion. However the bolt is too large to fit in that hole and it's not threaded. Am I missing something?
@OliWest89
2 жыл бұрын
Dude, I want a rig so bad!!
@HANNON1066
2 жыл бұрын
Just had my TR80 delivered… nuts and bolts not labelled.. missing the two lengths of box section what the seat sits on part P17…manual says I should have 2 lengths at 500mm I got 460mm.. part P11… says I should have another 2 lengths at 445mm I got 400mm… part P18… 2 of these lengths should have threaded ends non have threaded ends.. Manual says should have 83 S2 bolts I have 24.. should have 24 S3 bolts I have 83.. seems they sent wrong amounts out… emailed them no reply… I waited 2 months for this to be delivered ordered on the 10th of April 2022… absolute joke lmao..😂😂😂😂
@CartaIV
2 жыл бұрын
Damn that’s actually unfortunate to hear I’ve been wanting to order that exact rig.. did you get it worked out yet?
@single_cam9199
9 ай бұрын
What made you choose the rally seat over the gt
@mercuriallimit
2 жыл бұрын
I watched your videos twice already before this last time, thinking 8 hours?? But then today I just contact my vendor for my purchase this coming sunday, things in your video starts to look scary LOL. I will follow YOUR instructions definitely. As per setting up the position, do you have any recommendation as to which part should get fixed first? My understanding is that the position driving position can be moved up or down. OR does the front plate has its limits and you can only move the Wheel base column? cheers
@heppe00
2 жыл бұрын
I just ordered a TR8 rig, cause I race on console I can‘t use an ultra wide monitor, do you think a 32 inch monitor would be big enough, my second option would be a 40 inch TV, distances should be pretty similar to your setup. Thanks a lot.
@Drew_2308
Жыл бұрын
yeah we can tell you skimmed the instructions since your seat brackets are on backwards lol
@Yorkie065
Жыл бұрын
Yeah, don't do what I did :D
@ZONDA432
2 жыл бұрын
Was your hardware labeled? I received my TR80, but none of the hardware is labeled so I have no idea what is what.
@Yorkie065
2 жыл бұрын
Some of the hardware was, mainly the bits that were in the packets. The main pieces of aluminium though weren't, but I figured them out by reading the instructions carefully and measuring each piece.
@Medmax00
Жыл бұрын
hello how did you connect the T300 to the fanatec pedals?
@Yorkie065
Жыл бұрын
Both the pedals and the wheel are connected to the PC via USB. Have not connected the two together like you would if using thrustmaster pedals and thrusmaster wheelbase.
@KrisPlays874
2 жыл бұрын
You are aware your seat mounts are on back to front arent you ?
@skitz5664
Жыл бұрын
There are absolutely no labels on my hardware as there are yours...
@JoeCaparo
2 жыл бұрын
Where the fuck is the Manuel?? The only one I can find online only has box 4, 5 and 6 and they don’t even open because they’re “too big”
@MichaelRaces
Жыл бұрын
It’s a shame actually, their customer service is woefully bad, like, really really poor.
@ddrhero
2 жыл бұрын
How did that take you 40 hours? I built a wooden rig from plans from ricmotech in 12 It'd like I always said, if you call a wrench a spanner, you don't need to be holding it.
@Yorkie065
2 жыл бұрын
It didn't take me 40 hours. It took me 12-16 hours in total, with 3-4 hours spread across 3-4 evenings. First time building one, and I had to move things a bit from where the instructions initially suggested to make the measurements suit me and provide a comfortable driving position.
@Mr_jz_12
2 жыл бұрын
Couldn't tell you what halve the tools are called in my shed but built my own car. You dont need to know names to know how to use them.
@TheJynx2011
2 жыл бұрын
A wrench and a spanner are the same fucking thing LOL
Пікірлер: 35