Thank you for quickly showing how and not spending 10 minutes talking about why and reasons etc as other videos do.
@DustinTavo
3 жыл бұрын
Seriously. People always have a way of making tutorials 20 mins long for an action the takes 1 minute.
@mariohernandez9316
3 жыл бұрын
@@DustinTavo they talk like crazy but when they do the work they play a background song 💀
@DG-ss1gc
3 жыл бұрын
The worst is when they do all that, but then do the actual work with some asinine camera placement so you cannot see wtf they are doing… So you sit through a whole monologue and then zero effort put into the tutorial part. Take notice! This video is how it is done! Well thought out direction of photography! So important to a tutorial of any kind.
@martijnmakelaar4353
2 жыл бұрын
So true.
@danseymour9414
2 жыл бұрын
@@DG-ss1gc so God damn true man!
@salahkarassi3720
4 жыл бұрын
IM SO HAPPY I FOUND THIS VIDEO
@scottgehlken2330
4 жыл бұрын
me too
@rk-zm7gz
4 ай бұрын
Thank you for this video , I was having trouble shifting and my clutch needed adjusting really bad and this video just helped me out
@cookieman876
Жыл бұрын
KZitem should incentivize short concise accurate and simplified videos like this dude 10/10 on the subject, what more could you ask for.
@MotoMedic
Жыл бұрын
bad ass dude. . thank you.
@colbykesler1188
5 ай бұрын
This man solved a 2-month problem of mine in approximately 160 seconds. THANK YOU
@MotoMedic
2 ай бұрын
@@colbykesler1188 gotta. Be my favorite comment on any of my videos. Thank you
@sergeynikolov4758
2 ай бұрын
Thanks about your video!!!
@melfips3
2 ай бұрын
Same here! I was having issues with my clutch perch not returning all the way and this fixed it for sure! Thank you!
@MotoMedic
2 ай бұрын
@@melfips3 These are the things that make me smile. Happy I got another rider back on the road. Thanks for the comment. Keep the rubber side down.
@loganborn_ZL1
Ай бұрын
6 month for me😭😭😭
@Shannxy
3 жыл бұрын
As a non-mechanic (ML Engineer), but love learning how to fix or replace things by myself, this video was incredibly good, short and accurate, well done! These gems save so much time rather than having to fidget around, read manuals or watch long drawn out videos. Greatly appreciated!
@MotoMedic
3 жыл бұрын
Huge thanks! That means a lot!
@WFO.Ian.30
2 жыл бұрын
Thanks for the video! New rider here. Your channel should be a great help to me in the next coming warm months.
@MotoMedic
2 жыл бұрын
Awesome! I'm always happy to help!
@brendanoconnell9389
4 жыл бұрын
Thanks for having a straight forward video they’re hard to come by super helpful
@MotoMedic
4 жыл бұрын
Glad it helped and thanks for the comment!
@bae744
3 жыл бұрын
Wow I watched 4 other videos and I think I blew it. You made this so simple that I am so angry I even bothered with the others. Time to go back and check it. Thanks buddy. Really appreciate your video.
@MotoMedic
3 жыл бұрын
I'm glad I could help out!
@johnnicholls4665
4 жыл бұрын
Been having problems getting my clutch right to get my gears so will try this and hope it works thanks .
@BB-ee9gq
2 жыл бұрын
I thought my clutch was hooped with the jerking from neutral to 1st gear followed your adjustment video saved hundreds of $$$$$. Thank You.👍👍🇨🇦
@fonz1anddone713
6 ай бұрын
What your experiencing is it when you go from neutral to 1rst gear the clutch kind of pops?
@simplybuilt_1708
2 жыл бұрын
Usually, I don't comment or like videos but man you are a true-life saver. not only did you not extend this to a 20min video, but you kept everything short and simple. Thank you so much for helping me out, man. I was on the freeway when I noticed my clutch lever acting a little funny. I then managed to get home to assess what had happened and my clutch lever was just not springing back at all. thank to your video I was able to fix this at home with a bit of patience. Just saved this new rider from some headache.
@MotoMedic
2 жыл бұрын
That's awesome! It's comments like yours that are my favorites. I'm glad it helped you get back to riding instead of thinking about a clutch getting weird. 👍👍👍 I appreciate the kind words!
@COWASOGGY
8 ай бұрын
Thanks man..dealership was about to charge $250,000 to just see what was wrong with the clutch
@aaronanderson2315
2 жыл бұрын
Thank you! I recently did a bunch of upgrades. All done by a shop, they changed my levers out but failed to adjust my clutch cable. The friction zone was way at the top and was having to give way to much gas. Also my hand was fatigued fast, after your advice, she's back to normal. Smooth shifts and not a lot of throttle into 1st gear. Finding your video has given me a piece of mind again. I just new something wasn't right but couldn't put my finger on it. The adjustment was easy. Your the man!!!-
@D4N13L77
Ай бұрын
God I’ve ridden 1000km’s with the clutch too loose.. now it feels way more better, thank you very much!!🤙🏻
@metube9541
4 жыл бұрын
Great tips, all adjusted now and working as it should. Cheers
@Tawni.6269
4 жыл бұрын
Informative, no nonsense video, I gave it a thumb up and subscribed thank you. 🗨️😊👍
@DenyWatanabe
Жыл бұрын
So refreshing to see a video that's right to the point instead of spending countless minutes explaining what a clutch is, its history and what the bathroom of its inventor looked like, subscribed.
@MotoMedic
Жыл бұрын
hahaha! That's awesome man. Thank you. I try! I don't like researching bathrooms of dead inventors so that's a win win for us all!
@ulogy
3 жыл бұрын
Thanks for the informative video; finally replaced the old levers on my KLR (Previous owner biffed it on a trail, sheared off the end) and the new levers felt a bit -too- snug. Adjusted the lever end as much as I could but it wasn't enough. This gave me enough details to figure it out.
@MotoMedic
3 жыл бұрын
Excellent! Have fun!
@sandersfamily7962
3 жыл бұрын
Good stuff man fixed my clutch in 5 minutes easy peazy thanks 🙏🏽
@MotoMedic
3 жыл бұрын
Right on!
@findingneutral
4 жыл бұрын
What an awesome straight to the point video...2019 Honda 🐒 12 milameetah! 👏
@gscheben123
4 жыл бұрын
KZitem posters could learn from this guy. Succinct, accurate, great tutorial!
@SebSar-ef4zj
4 ай бұрын
Straight to the point and no fancy talks , no gas bagging , no annoying background music, only useful information and great teaching... Many Thanks Love your work. *A*A*A*A*A*
@sagerssd
4 жыл бұрын
Thanks! My clutch feels allot smother now!
@infeedel7706
3 жыл бұрын
Thanks from Australia mate!
@alannavarro5421
5 ай бұрын
Fkn awesome i was debating on working in that part but kinda didnt want to. until i found this video. Cheers!
@dholmes4449
3 жыл бұрын
Haaa awesome. 12 mil. Ill remember that one!
@ramtinbs22
2 жыл бұрын
Finally, about 15 videos later, someone decides to upload a straightforward video on how the hell to do this and which way to turn the adjustments. Thanks, legend. P.S 12mm worked on my SV650. You weren't kidding.
@HuckitMedia
3 жыл бұрын
Awesome video! Thank you!
@LOYALLUTON
2 жыл бұрын
Very clear and precise instructions and made it easy for someone like me who has no mechanical skills ,thanks very much mate.
@MotoMedic
2 жыл бұрын
Glad to help
@ExpresShans
3 ай бұрын
Thanks! Now I’m confused on the word lever. It’s lever or Leave er…. Tomato tomOto 🤷♀️
@MotoMedic
Ай бұрын
in the UK it's definately LEAVE 'er :P
@barrowscasper12
Жыл бұрын
Hahaha I saw the clutch cover, was like that's an R6, and it was. Spend wayyy to much time on that bike back when, loved it too much to let it go though
@MotoMedic
Жыл бұрын
Right on!
@kaedonfa9078
4 жыл бұрын
This guy is the next Bill Nye. Nah F&@* that, he IS THE MOTO BILL NYE!
@flavioks5438
8 ай бұрын
Best fucking tutorial ever this guy is the best
@TheMohammedAlmashaqbeh
7 ай бұрын
Hey man, got a 1985 yamaha virago 700. Would this fix the issue I'm having with the bike staying idle and not moving in any gear? Like they're all netural.
@MotoMedic
7 ай бұрын
Sounds like you've got a bigger issue. Clutch might need replacing
@primarqo
3 ай бұрын
There needs to be a small gap of about 3-4mm or you will burn out the clutch within 1000 miles. I do it by leaving a bigger gap and then gradually reducing it while watching the pulley on the clutch and tightening it until it start moving little bit. You have to stop tightening before it moves, so go back little bit then, it also makes clicky sound when the clutch disengages, that's your right gap.
@610adventures7
2 жыл бұрын
Thank you! Great video. It was quick, descriptive and straight to the point. Not many tutorials are this helpful 👍
@MotoMedic
2 жыл бұрын
I appreciate that! Thanks for the comment and happy riding!
@guysmtih
4 ай бұрын
I'm thinking this (too slack a cable) is the cause of my tricky shifting/impossible to find neutral on my '78 yamaha xs. If the clutch cable is too slack, this will be the reason the engine cuts out occasionally when I slow to a stop and the clutch is fully pulled in.
@x-man5056
2 жыл бұрын
Excellent presentation. Subscribed.
@MotoMedic
2 жыл бұрын
Thanks!
@goodspeed2337
Жыл бұрын
No kidding 2002 Yamaha V-star 650 12mm damn thing was easy thanks bud
@MotoMedic
Жыл бұрын
What'd I say!? 12mm. :D
@oodsigma4482
2 ай бұрын
Had an issue with the transmission clunking while shifting during rides. Yesterday I took the clutch and throttle cables off my VTX1300C and cleaned and lubed them. Throttle cables were easy. Only moved one nut at the carb end to get them off. Just put those back. The clutch was a different story. Went for a ride earlier. Had the clunky problem worse. Rewatched this video and went out and adjusted it at both ends. Fun fact: the VTX1300C has a 12mm nut on the clutch side at the bottom and a 13 or 14mm on the other side for some reason. But bike rides and shifts so much better now. I appreciate your teaching method. It's simple, easy to follow and to the point. Genuinely appreciate this sir.
@MotoMedic
2 ай бұрын
@@oodsigma4482 glad it did the trick!
@Kolbyking144
2 ай бұрын
@@MotoMedicyou made this so easy and been dealing with a wr250….pumped to be like it’s solved 👏🏼🎉🙌🙏🏼. Thanks man
@MotoMedic
2 ай бұрын
@@Kolbyking144 Glad it something I put on the internet helped someone. :)
@Kolbyking144
2 ай бұрын
@@MotoMedicit did man and you reinspired my pursuit on road bikes. Love BMW and Harley’s, but Harley just went off the deep end ruining the minds of their employees children…😂😂🤦🏼♂️🤡🗺️ Your a great teacher, filming and explaining things. 🙌🥳🎉🌅
@ripsnortedg4922
2 жыл бұрын
Legend great video as I’m gonna sound like an idiot but I haven’t adjusted my clutch and was wondering why it’s gearing like an absolute pig thanks mate !!
@michaelchristopher2549
5 ай бұрын
Thank you for the tutorial...very helpful!
@MotoMedic
5 ай бұрын
Glad it helped!
@davidpardy
10 ай бұрын
Appreciate the short format and straight to the point information! I just bought a bike again after not riding for 5 years, a 2004 GS500F. Everything about it is fine apart from the late take-up in the clutch, so now I'll be able to fix that right up. I thought it would be a fairly easy fix and I was right :)
@davidpardy
10 ай бұрын
Can confirm that the clutch on my bike does indeed require a 12mm nut!
@MotoMedic
10 ай бұрын
excellent!
@k_darius
4 жыл бұрын
Hey. This is a great video. I have a question, so when you take out the play down at the clutch, and then adjust it up at the lever, will the play come back at the clutch? I am new, so my logic is this is just one cable so if you have play at the lever you will have play at the clutch. Thanks for your help in advance!
@MotoMedic
4 жыл бұрын
Remember that you have adjustment at the lever too. Setting the play at the clutch is just making sure the cable is all the way set at that mount. I will usually turn the adjuster at the lever all the way in, and then back it out a couple of turns. That should give you plenty to give it more play if needed. So pretty much main adjustment at the clutch gets you close. Lever adjuster fine tunes you.
@tomasina4087
Жыл бұрын
Thank you! I think you covered what I needed in less than 30 seconds... went out to the garage, job done. Time to ride!
@seanhenry4830
3 жыл бұрын
Your video just helped me with my 1983 Suzuki gr650 tempter. Thanks
@samuelwest2551
3 жыл бұрын
Great video! Only addition is that some Hondas actually have a 14mm and a 12mm on either side - the 3rd generation Magnas (and presumably VFRs) are like this.
@wr450sm5
4 жыл бұрын
I’m getting clutch creep when I put it in first gear and rev it hard, the bike slightly moves forward. Other than that I can go into gear and find neutral. Do I have to go out on my adjuster to stop the bike creeping in first gear?
@Kid574
3 жыл бұрын
Though 6 months later, this might come in handy to someone else.. clutch creep can be an adjustment issue and is worth having a look since it really only takes a minute. Usually though it's caused by clutch plates not separating properly because they're either warped or the springs are worn out
@WrightWayAround
14 күн бұрын
i watching this to check if i was right about ajustment i have oem cable on my honda transalp 600 it 13mil btw not 12 lol.
@Thewarhorse47
10 ай бұрын
Excellent. Everything I needed to know.
@MotoMedic
10 ай бұрын
Glad it was helpful!
@irishpac22
2 жыл бұрын
Hello MotoMedic. Can you tell me why you needed to take out the little play at the bottom adjustment?
@MotoMedic
2 жыл бұрын
To get as much slack out of it before the fine tuning at the lever.
@irishpac22
2 жыл бұрын
@@MotoMedic Thank you so much!
@hotboyracing
25 күн бұрын
I’m having trouble with my bike the clutch won’t disengage when I pull the clutch in but it’s hard the whole pull
@elricaguilar6693
4 жыл бұрын
I needed to watch this Great video
@Porsche996driver
3 жыл бұрын
… unless you have a hydraulic clutch. Duh.
@MotoMedic
3 жыл бұрын
Which you can't adjust anyway so this video wouldn't pertain to hydraulic clutches anyway now would it?
@PHILIPWATSON82
4 жыл бұрын
Hey thanks for the reply all my repair shops are closed for the damm virus :( I've one more question please I've heard there should be a 2 to 3 mm gap freeplay at the lever but if I push the clutch arm all the way forward with no freeplay is that ok ? Thanks again 👏🏼
@MotoMedic
4 жыл бұрын
No.... you want free play. If there's no play that means it's pulling tension on the clutch and separating the plated just ever so slightly. Having play in the cable insures that everything closes up tight when you aren't grabbing the lever.
@Danielxperez14
3 жыл бұрын
how to i adjust my clutch so i wont have my problem where my bike wont move until I'm almost fully letting go of the clutch?
@MotoMedic
3 жыл бұрын
Probably time for a new clutch at that point... or new cable.
@Danielxperez14
3 жыл бұрын
@@MotoMedic really? I don’t think that’s the problem because all of my clutch cables are smooth it’s just that it doesn’t actuate until I’m almost letting go fully of the clutch
@MotoMedic
3 жыл бұрын
@@Danielxperez14 you're clutch is fine then. You'll just have to get used to it. Or get a lever that adjusts so it moves the friction point closer to the bar.
@Danielxperez14
3 жыл бұрын
@@MotoMedic i was thinking about getting asv levers
@grominwithrob1339
3 жыл бұрын
Great video. I use two nickles for lever spacing. Honda Grom and Honda Monkey have 12mm and a 14mm nut at the case.
@jjaygunz
4 жыл бұрын
Just subscribed thanks brother 🙌
@kmoton01
5 ай бұрын
Hi I find out your video I trying everting on my Honda shadow 96 vlx600 it was working fine but I make a mistake trying playing to be a mechanic adjusting my clutch I don’t know what I did wrong now my motorcycle kills when I go first wear on clutching on can you help me please
@ak-47821
Жыл бұрын
this is a great video
@joseacevedo8026
10 ай бұрын
You video saved my bacon in Baja when the clutch in my 2023 Tener 700 when out. Long story short I was three days into an 8 day Baja trip when my clutch went out riding a sandbar. When I had it towed my a local to a hotel I googled and found your video the next morning. I was able to finish my trip thanks to your video.
@MotoMedic
10 ай бұрын
This is the best comment I could have read today. Have a blast! Ride safe! And glad I could help!
@SandiTerreri
Жыл бұрын
Short and to the point. Thank you. 2005 KAWI KX65 is a 10mm, BTW :)
@MotoMedic
Жыл бұрын
Thanks!
@SheppC42
Ай бұрын
Except on the harley street750... 14mm on those. Basically the same. A lil more finicky on too
@XFauni
2 жыл бұрын
Yeah I have far too much play in my ‘21 mt-09. Already having issues with the quick shifter hitting neutral mid wheelie or mid pull and gear grinding after I qs into neutral smfh
@joshualopez9813
7 ай бұрын
So I just replaced my clutch plates on my ninja 400 now after putting it back my clutch cable lever won't come back out like even after the adjustment of the 12mm nuts I can't get it to be stiff any ideas 😅
@Ryansanders729
2 жыл бұрын
I have an 08 R6s and I just replaced the clutch. The bike moves forward in gear without me letting the clutch go. Does it just need to be adjusted?
@wav1366
4 жыл бұрын
Clutch started working sloppily so I went in to check the lever. Lmao turns out the whole thing had ripped. Good thing that didn't happen on the highway!
@rafagas5150
4 жыл бұрын
That shit just happened to me on a red light a week ago.light turned green I squeezed the clutch and snapped!!that shit sucked!
@bonobo3748
2 жыл бұрын
KZitem encourages time wasting videos which isn't the best for tutorials. Sux that concise info is punished by KZitem for not making them enough money
@paulf2534
6 күн бұрын
Great video. I'll be grabbing my 12mm and heading out to the shed tomorrow. Thank you.
@Avensur
5 ай бұрын
Thanks buddy, now I can see my adjustment is out. Excellent tip my friend 👍💪.
@Filaxsan
23 күн бұрын
Yo! Simple video, but just in 2mins you helped me (and many others for sure) a loot!! Thanks a ton man!
@dirtbikesparky8567
Жыл бұрын
Awesome video, thanks for the advice. Im having an issue with my china dirt bike, its a brand new bike with low hours and its always been very hard to shift gears and also finding neutral while the bike is running is dang near impossible!! I am going to try this and see what happens
@MotoMedic
Жыл бұрын
Hey buddy... thanks for the comment. Not sure what you seem to think you saw but that bike is still running, on the road, and rust free 5 years later. Be nice.
@meegs304
2 жыл бұрын
Same principle for a dirtbike I suppose?
@MotoMedic
2 жыл бұрын
Exactly... For all cable actuated clutches.
@meegs304
2 жыл бұрын
@@MotoMedic thanks boss
@MotoMedic
2 жыл бұрын
@@meegs304 you bet! 👍👍
@ffejkk37
2 жыл бұрын
I've been wanting to know why my bike lurches when popped into gear, and the shifting is rough. Thanks for the info!
@MotoMedic
2 жыл бұрын
Any time! Glad to help!
@1683clifton
Жыл бұрын
Perfect execution
@usernamemykel
Жыл бұрын
Good info! QUESTION: I adjusted the lever gap some time ago, and now I'm realizing that when I want to go to N from 1st gear, instead of going into N, the bike goes into 2nd gear - so do I need to increase or decrease the gap? Thank you!
@MotoMedic
Жыл бұрын
Neither... you need to practice finding that sweet spot :P
@usernamemykel
Жыл бұрын
@@MotoMedic Negative - I adjusted the gap and reaching N is a lot easier.
@stresslee
2 жыл бұрын
I took my bike to a shop and they legit adjusted my clutch, my friction zone is all the way at the end of letting go of my clutch now It's pretty annoying, I was used to what I had and it's completely thrown me off Idk why they would switch it for me when I didn't ask for that
@RodneyFogIam
10 ай бұрын
Awesome video mate, thanks to you I just adjusted my Daytona 600 clutch in 2 mins flat ❤
@MotoMedic
10 ай бұрын
Nice work!
@mikehughes2831
4 жыл бұрын
What do you think would cause a new cable to jump over neutral? I just put a new cable on my 13 KLR650 and now I really have to hunt for neutral. It didn’t do it with the old cable.
@MotoMedic
4 жыл бұрын
A new cable shouldn't make it tougher to get into neutral if it's adjusted properly. However if your clutch itself is wearing out that definitely can cause it. A fresh oil change can sometimes loosen things up as well. How long has it been on the current clutch?
@mikehughes2831
4 жыл бұрын
I’ve owned it almost a year, no telling what PO did/didn’t do. It’s on pretty fresh oil. I did figure it out. Cable wasn’t properly adjusted. Used your info and got it adjusted and it’s working great now. And wouldn’t you believe it, the nuts were 12mm 😜. Thanks for the video and the help!
@MotoMedic
4 жыл бұрын
@@mikehughes2831 haha! Excellent! Glad it helped!
@savvy1526
4 жыл бұрын
Hi I have a 110cc pocket bike that will take off when put into gear while still hold the clutch anyone know why this is bike sat for years and just recently put a new clutch cable on
@MotoMedic
4 жыл бұрын
If it has sat for a very long time in the wrong conditions, the clutch plates could be fused together.
@savvy1526
4 жыл бұрын
Moto Medic I’m thinking there was a prior clutch problem with the bike before I got it I’m just wondering if this could be a bad adjustment or I need to replace the clutch any ideas? Also I haven’t put any new oil in it. Btw not very repair savvy
@jacobfernandez2731
3 жыл бұрын
Solid video homie
@EzPeasZ
Жыл бұрын
This is a great tutorial!! Not just for being quick and to the point (which is nice for the sake of time investment), but also gives concise, practical information - some of which were was not included in some much longer videos.
@master7135
3 жыл бұрын
I need help when i adjust the screw on my lifan 125 when i back it out it jerks abd drags the clutch really bad but when i screw it in it still drags and slips
@yigitmuratozer7833
25 күн бұрын
is technique solve neutral gear problem? I can't find neutral gear
@14glen88
10 күн бұрын
I've been riding over 40yrs and this was the best explanation I've got
@devankrebs4477
4 жыл бұрын
Thank you!! I was adjusting at the clutch lever and not the side case and I couldn’t figure out why it wasn’t doing anything. It was kicking my butt till I found this video.
@MotoMedic
4 жыл бұрын
Awesome! Glad it helped you out!
@scoobyroo218
4 жыл бұрын
good vid, quick simple and informative, nice one
@MotoMedic
4 жыл бұрын
Thanks!
@__Diaz__
2 жыл бұрын
THANK YOU SO MUCH! going to replace my cable this afternoon and this made it soooo simple thanks x1000
@MotoMedic
2 жыл бұрын
Glad it helped!
@luisorozco3061
4 ай бұрын
Thanks sir I replaced my handle bars and all was ok until I took it for a spin and then felt as if the clutch was lagging now I see how to adjust it thanks man
@NathanJ358
Жыл бұрын
Is there a way to tighten that knob thing and do the lines have to be matched up?
@roydied15
Жыл бұрын
So if I don’t have any more adjustment in the nuts and my cable is still loose, does that mean my cable is stretched out and I need a new one? 2003 Honda hornet 919 with about 30k miles on it
@MotoMedic
Жыл бұрын
Yeah I'd probably get a brand new one man. They're only about $30 or so.
@chuckmurphy5701
Жыл бұрын
Damn, I love the Japanese!
@MotoMedic
Жыл бұрын
They really do engineer things well and simply. (Except Yamaha.... sometimes they forget to have a mechanic in the room when developing a bike. lol)
@PHILIPWATSON82
4 жыл бұрын
Hey bud before you loosened the two nuts did you turn your lever end adjuster all the way in before ? Thanks
@MotoMedic
4 жыл бұрын
Yes... I guess I missed mentioning that in the video, but yeah. Run it down pretty far first so you have plenty of room to adjust.
@georgekalogeropoulos3117
Жыл бұрын
Great turorial video! My aprilia uses a 13mm nut instead of a 12mm
@MotoMedic
Жыл бұрын
Yeah not every one is going to be a 12mm but I was always laughing at just how many are!
@davidcollins6903
Жыл бұрын
Excellent
@coltwinchester94
4 жыл бұрын
man... I can’t get it to 2nd gear there’s too much play in may clutch. Thanks I’ll adjust it right away with just 12mm wrench.
@dhatbwoy696
3 жыл бұрын
My 04 zx10 would creep in first gear - so I figured it needs adjusting so I tried adjusting my clutch the way you did and it worked fine for a few miles, got on thr highway and opened the bike up and no slipping or anything and shift was snooth but once I got back to local streets each shift became hard to shift and at one point it didn't want to go into neutral (had to shut off bike) and the creeping is back again :( please any word of advise? Bad clutch pack maybe? Just got the bike 2 weeks now.
@MotoMedic
3 жыл бұрын
Check and make sure everything is tight for sure. If that's all good it could just be time for a new cable. A bad clutch sign is when cruising in 6th and you whack it open... Rpms spike and you're not going much faster.
@dhatbwoy696
3 жыл бұрын
@@MotoMedic well she gets up, I cracked it open and she went up to 175mph easy so no slipping. Also the adjustment at thr bottom is pretty much backed out all the way and the knob by the clutch lever is halfway backed out and still like half inch play.
@MotoMedic
3 жыл бұрын
@@dhatbwoy696 new cable time!
@dhatbwoy696
3 жыл бұрын
@@MotoMedic okay I'll try that, thank you.
@CHiTO316
3 жыл бұрын
Can someone help me? I have a 2015 Honda Grom which starts up perfectly. My issue is whenever i go from Neutral and i put it into 1st gear. The bike jolts forward and just dies, every time. My clutch cable only has about 1/2 inch of free play so idk if that’s the issue. I’ve also let the bike unused for 30 days so maybe the clutch isn’t wet enough? I checked and for some reason my bike seems to have no oil left either
@MotoMedic
3 жыл бұрын
So your bike has no oil left, but you're still starting it up? that's not a good idea. Let's start with making sure there's the right amount of oil it it. Then.... adjust the clutch. A half inch of play??? Did you watch this video at all? Watch it and follow the steps on how to adjust and set your clutch play. Chances are there's nothing wrong with your clutch. All bikes will lurch a little when they click into 1st from neutral but only enough to kind of feel it going into gear. Shouldn't be killing the bike.
Пікірлер: 639