Here is the product page for IDEAL Voltage and Continuity Testers
www.idealind.com/us/en/shop/p...
The IDEAL 61-557 Voltage Continuity Tester is a CAT IV 600 Volt auto ranging digital meter that measures AC and DC voltage, determines DC polarity, tests for continuity, test trips GFCI’s and includes a non-contact voltage sensor.
The meter has a 600 count LCD display that can be backlit and has a built-in flashlight that can be illuminated when working in low light conditions. The 61-557 displays PPE in the top right of the display for the potential requirement that personal protective equipment should be used when making measurements above 30V AC and 30V DC in certain applications.
Pressing and holding the LoZ button will enable the Low Impedance AC Voltage function to reduce the possibility of false readings and defeat the influence of ghost or stray voltages on the displayed value which are often caused by induced voltages coupling from one parallel conductor to the next.
It detects the presence of voltage between 40 to 600 volts AC via a non-contact sensor in the top center of the meter. Simply press the NCV button and EF shows in the display. Then hold the tester near a hot conductor like this receptacle to indicate if voltage is present the red LED will illuminate and the beeper will sound.
Continuity testing can be done by pressing the continuity button and an audible symbol is displayed in the bottom of the display. When continuity is detected the red LED will illuminate and the beeper will sound.
The tester can also test GFCI outlets by placing the red lead in the smaller hot slot in an outlet and the black lead in the ground slot. Then pressing and holding the GFCI button for several seconds the GFCI receptacle should trip to ensure that it is working properly.
The back of the meter has a built-in two position dual probe holder; the lower position allows for probe storage; the higher position allows the probes to be used for various testing conditions and are spaced to allow testing a standard electrical outlet.
The meter has a mount on the back that allows for a hanging strap which is sold separately to be attached so that it can be hung from a nail, screw or magnet compatible metal surface.
A Pro industrial grade overmolded design makes this tester easy to grip and is IP42 rated which means it is protected from dust, water resistant and capable of sustaining a drop from 6.6 feet.
The tester conducts a Self-Test at each Power ON, automatically detects AC or DC voltages levels and DC polarity, has a low battery indication and an Auto Power Off function after 15 minutes of no activity.
The 61-557 Voltage continuity tester is a rugged tester for everyday use that can be used in residential, commercial, or industrial electrical applications. Thanks for watching folks please read and fully understand the instruction manual before using this tester I’m Ron with IDEAL I’ll see you on the next one.
#IDEALINDUSTRIES #61-557VoltageContinuityTester #RonKipperFromIDEAL
Негізгі бет Ғылым және технология 61-557 Voltage Continuity Tester
Пікірлер: 14