Sweet, it's going to be a badass ride. I would definitely go with a little bit longer shackle in the back, nothing to crazy.
@creents100
3 жыл бұрын
Can you tell me what the arch is (make a line between spring eyes and measure arch to the top of the spring) when the truck is sitting with the weight on the springs. I am wanting to use 63 inch springs on a Dodge M37 off road project. This would be a great help in figuring how high on the frame to weld the spring mounts. Thanks for the video.
@thatsmylawn9782
5 жыл бұрын
how much do these lift the truck? i have 62's on a 4 inch reverse shackle but they are all kinds of messed up and the shackle is completely flipped up. If i were to swap the shackle flip (they're diy4x so you can move it back a couple of inches) would it raise the truck? or would it fix the problem with the shackle angle and ride at the same height. any input would be tremendously helpful.
@justinchapman7363
6 жыл бұрын
When you did any lift or the spring swap does the rear end stay centered with the jump stop?
@BENK482
6 жыл бұрын
I think it moved a little bit not much
@TheMustangman09
3 жыл бұрын
What year is your Blazer.. I have a 87 K5 Custom Deluxe w a 5.7/SM465/NP208 but haven't done any gear mods or a lift so its basically all stock as a DD, but if I were to lift, would I have to upgrade gears?
@BENK482
3 жыл бұрын
Mine is an 84, and as for changing gears, depends what you have in it now, how big of tires you plan on running, and what the purpose of the truck is. If you’re just daily driving it I’d say you’d be fine, if you are rock crawling, I’d say to put lower gears in it
@kevinroy1105
6 жыл бұрын
What kind of job do you have? If you don't mind telling me.
@BENK482
6 жыл бұрын
Kevin Roy I’m currently in my last year of school for a diesel technician program and when I’m not at school I work at a semi repair shop by me
@GotScout
6 жыл бұрын
Ben... put spring sliders in the rear... no shacks in the rear.
@owayne1312
6 жыл бұрын
Where abouts in our great state are you? Just wondering cuz i saw ur plates and im also a Wisconsinite
@owayne1312
6 жыл бұрын
Ben Kraus heard of it... definetly north of me lol
@miguelcarter1949
4 жыл бұрын
Why are you doing it all back yard mechanic style when you have a lift inside the garage.?
@fedrickwiley9014
6 жыл бұрын
If were to say launch this truck how much would the rear springs compress?
@BENK482
6 жыл бұрын
Fedrick Wiley I have no idea honestly....
@fedrickwiley9014
6 жыл бұрын
Okay thanks for trying to help
@allraiders420
4 жыл бұрын
What did you search for to find those ?
@allraiders420
4 жыл бұрын
The bushing I mean
@metalmulishasmith
6 жыл бұрын
Selling those rear 52s that you pulled off?
@BENK482
6 жыл бұрын
metalmulishasmith Sure, if you’re in the area. Otherwise shipping would be really pricey
@metalmulishasmith
6 жыл бұрын
Ben Kraus lol I'm kinda far. California to be exact.
@travisbrannon4784
6 жыл бұрын
You should check out jonathan w he has a youtube channel he knows alot about these trucks hes working on one now and the front bumper is a main structure to the frame it can crack the frame at the steering box if you drive it without the bumper. I like the videos your getting alot done.
@BENK482
6 жыл бұрын
Like a C10 Thanks! And I just took the bumper off because I’m going to build a different one, I don’t plan on running it without one
@travisbrannon4784
6 жыл бұрын
Ben Kraus no problem i seen your older vids when you did the cab swap looked like alot of work you did good.
@BENK482
6 жыл бұрын
Like a C10 That was on a different truck
@travisbrannon4784
6 жыл бұрын
Ben Kraus i know lol i was just saying i seen your older vids before my bad i remember you pulled the flatbed off that one
Пікірлер: 26