I paid less than $16 USD and mine came with a US adapter, a dock with a slot for just the battery and a slot for the whole radio (only charge one at a time though), and a earphone mic with PTT surveillance kit. I bought these under the WLN brand and the Zastone brand and model X6, both in black. (They are also available in white also). One unit has low mic audio from the internal mic, but external mic is good, so it's a mic problem, probably need replacing. I haven't done that yet. My friends really like it also. Great for the kids, one of them said. There is a hack to program it on VHF, but I won't TX on it. Just for RX but the antennas isn't resonant on VHF. So not very sensitive there.
@e75channel
3 жыл бұрын
Interesting video.
@nayanjagirdar8408
4 ай бұрын
👌👍
@markifi
2 жыл бұрын
wow i never expected to find something when typing in "wln kd-c1 disassembly" but seems like youtube has everything. thanks! (i'm wondering how can i put a battery in this thing that lasts longer than the stock 16 hours standby)
@AECRADIO1
3 жыл бұрын
Screw holds antenna and chassis to front case.
@TouYubeTom
3 жыл бұрын
got two bundled for 20 euros
@AECRADIO1
3 жыл бұрын
Volume control probably has a collar nut.
@caloocandrrmo1710
2 ай бұрын
do you have software for kd c90u
@AECRADIO1
3 жыл бұрын
Even cheaper...soldered antenna. Easy to retrofit an SMA.
@boggs2005
2 жыл бұрын
Will it work on FRS Frequencies?
@bobkozlarekwa2sqq59
3 жыл бұрын
I’m curious about power output and what frequencies were really programmed into this
If they are on 446, that’s in the amateur radio band. Definitely needs to be reported to the FCC
@AECRADIO1
3 жыл бұрын
Impossible to get 5 Watts with 1.0A current. USB is common interface for data/charging these units. HYT has this, as do most.
@AECRADIO1
3 жыл бұрын
BK4815 128-590 MHz. 12.5/25KHz ch. spacing 5 dBm RF PA 3.0-3.6 V power..CTCSS/DCS Standard DTMF Sell all 1.2/2.4 Kbps FSK data W/F2D or F1W modulation 3 wire interface 4X4 32 pin package.6
@MohammadAliLayatan-xd7ht
8 ай бұрын
Paano kong parang groud ang salita anong sira master
@AECRADIO1
3 жыл бұрын
FCC is not law, only rules. Too many wrongly exchange the info. Any software to program it, or is it preprogrammed? DIP switch programming? Multi button hold/press to step through channels?
@IMSAIGuy
3 жыл бұрын
you can program it via USB cable. not chirp but they have a different program. hold press bottom button to start scan.
@paulcohen1555
3 жыл бұрын
We need some measurements, power out, spurious, receiver sensitivity.
@maka5955
3 жыл бұрын
@@IMSAIGuy Chirp works. It's have WLN KD-C1. Only Plus version with channel display need own program.
@brandonbarr2784
3 жыл бұрын
Google the frequency it’s much faster than making a video
@mjrtude
3 жыл бұрын
Hey don't leave us hanging. Program it up lets make some measurements.
Пікірлер: 26