Can you imagine doing all that work in your home garage without a lift? Having good supporting companies definitely helps!
@AutoXandTrack
4 жыл бұрын
For sure! I might not have bit off quite so much without help.
@bstafford11
4 жыл бұрын
Great progress on the Mustang. I'm sure all the effort will be well worth it once you get this beast on the track.
@JB-ki8ok
4 жыл бұрын
It's Kool that you get to do most of the work yourself. Going to be a Kool mustang.
@genemounce8302
4 жыл бұрын
STILL regretting selling my '68. Look'n good man.
@paulperpingon7732
4 жыл бұрын
Hoping I can get my project started this winter. I keep watching for the inspiration.
@AutoXandTrack
4 жыл бұрын
I get inspired all the time watching other people do awesome car things on KZitem. Glad I could pay it forward.
@rodtaylor1676
4 жыл бұрын
Like the wheel tub modification, you may save me some work!
@jeffg4008
4 жыл бұрын
Very cool. Should get hundreds of likes!
@broncomitch8677
4 жыл бұрын
Grate video! Should make me some of those wheel tub panels for mine! I still have holes lol
@AutoXandTrack
4 жыл бұрын
I'd probably be in the same boat if I didn't have help lol
@mr.nobody4349
4 жыл бұрын
Looking awesome! Keep up the good work. This thing will be a beast.
@mattbirnie6979
4 жыл бұрын
Loving the update videos! I know you’re itching to drive but at least you have the Camaro to hold you over!
@AutoXandTrack
4 жыл бұрын
For sure. Definitely nice to have two :)
@mrjones528
4 жыл бұрын
I am excited to see this beast when it is finished. I have 67 Mustang and would love to run 315’s all the way around it. Thank you for posting up the videos for us to follow your build.
@AutoXandTrack
4 жыл бұрын
I’m hoping to have the next installment up in a few days! Thanks for following along.
@TheGeonam
4 жыл бұрын
I have a 65 mustang convertible. This past Monday I started to install a TCI four link rear suspension. Today I finished installing the rear crossmember that the coil over shocks bolt to This was not an easy job plus a lot of drilling through the frame . I have all the parts that are attached to the car in place and looking good. I'll start tomorrow on the rear-end housing . I hope to put some video on KZitem of my build. Great looking car your building.
@markkingsley4707
3 жыл бұрын
Great job. Starting my 68 Cougar Heidt front end tomorrow. Trying to get as many pointers as I can prior to.
@E.T.GARAGE
4 жыл бұрын
Very Good Video cant wait to see it on the track.
@AutoXandTrack
4 жыл бұрын
That makes 2 of us! Starting to see the light at the end of the tunnel!
@wagonrod82
4 жыл бұрын
cant wait for the next video.
@tedmcconaughey8438
4 жыл бұрын
Nice job..really cool you have a great shop and help with your build
@Foghorn77
4 жыл бұрын
Love the vids. Would love to see lots more, especially the autocross tips.
@AutoXandTrack
4 жыл бұрын
Thanks. Info a walkthrough of a friends lap with more tips on episode 17 I uploaded today.
@michaelfairchild920
4 жыл бұрын
Looking good, Chad!
@72grabbermav
4 жыл бұрын
Need to do a live on the first drive!
@AutoXandTrack
4 жыл бұрын
Hmm. Interesting idea. It may depend on how everything is going at that moment lol.
@HarrisArt
4 жыл бұрын
Enjoying the videos for sure,
@scotticus26
4 жыл бұрын
Love watching the videos! I have been upgrading my nova for auto cross. Love the inspiration on the tech stuff and on your experience on the track.
@AutoXandTrack
4 жыл бұрын
Thanks! Have you run your Nova yet?
@scotticus26
4 жыл бұрын
AutoXandTrack I have not run it in any sanctioned events yet. Just a couple club days. I have a blast everytime. Right now I am running the complete Hotchkis suspension keeping with the their leaf spring rear. I have added frame connectors and upper and lower control arms up front. I have swapped all bushings for poly and could tell a significant change swapping to them. I am deployed at the moment and have been watching sadly from afar as a lot of events have been cancelled already throughout the year. I get back soon and am looking forward to taking it out and taking in some events as soon as I get out of quarantine and events start to open.
@brodychristensen486
4 жыл бұрын
What awesome builds you have! I can't wait to see the difference in handling with everything all done!!
@AutoXandTrack
4 жыл бұрын
You and me both!
@vaghags
4 жыл бұрын
keep it up man love these!
@AutoXandTrack
4 жыл бұрын
Thanks, much appreciated!
@tylerhess3383
4 жыл бұрын
Looks great! What did you use for undercoating?
@AutoXandTrack
4 жыл бұрын
I’m still waiting to get that info from the painter I used. I want to be able to touch it up.
@rodtaylor1676
3 жыл бұрын
Been really enjoying your videos. What size width rear end did you go with?
@AutoXandTrack
3 жыл бұрын
Thanks! 59.75” wide.
@LSVLance
4 жыл бұрын
Nice work Chad! Is it done yet? :D
@AutoXandTrack
4 жыл бұрын
I wish! I love seeing this thing coming together but I'm not a builder. I'd much rather be driving it than wrenching on it :)
@callofgeorge
3 жыл бұрын
hey i have the same TCI rear suspension. what did you do for exhaust to get it past/around the x-brace. and what size? i have a single turbo setup with 3" downpipe. only thing i can figure is route it around the outside of the car by the rocker (how i have it now, but its super low) or go up and over the crossbrace by the rear of the trans, but that'll be pretty tight.
@AutoXandTrack
3 жыл бұрын
I haven’t finished the exhaust yet. I raised my transmission crossmember to make it easier to route the exhaust in a traditional way (under the crossmember). The TCI R&D Mustang goes over the crossmember.
@callofgeorge
3 жыл бұрын
@@AutoXandTrack do you know what size their exhaust is that goes over?
@AutoXandTrack
3 жыл бұрын
I believe it’s dual 2.5”
@callofgeorge
3 жыл бұрын
@@AutoXandTrack ya, that's what i figured. 3" looks like there's no way its fitting.. may try oval pipe and run under it.
@XWorx
4 жыл бұрын
I tossed you a like - 5 to go!
@AutoXandTrack
4 жыл бұрын
We are there! Will do the drawing in the next video!
Пікірлер: 51