Im proud to say, I ripped off 26 square/ 2 layer's, fixed a few rot spots, nailed off any loose ends, applied ice/snow shield, cut the peaks for super ridge vent, paper (30 weight) and applied Tampco Heritage Dimensional shingles according to the manufactured spec. Capped the hips and ridge- along with carrying up all materials and supplies ( single story ranch ). I tarped the roof after the rip, and worked on it 4 days a week for 3 weeks using weekends and 2 vacation days each week. The total costs of materials was $4464.00 and the cheapest estimate I got was $10,200. So I saved $5736.00 and didn't miss any days at my full-time job, using a total of 6 paid vacation days. Not bad for a 62 year old. Ok, I had some years working as a roofer a long time ago, ( like 25 years ago), and that job afforded me the experience and funds to buy the house in the 1st place. My point here isn't to slam the speed a person can do the job, it's knowing the valuable asset of learning a trade that you will use later in life. Back then we earned $ 5.00 a square to rip a roof, and $ 10.00 a square to put it on. So 26 square + cap and ridge vent would have netted $450.00 and took 2 men about 4 days. This 1 took me 12 days and and I netted $5736.00 or $478.00 per day + 3 full weeks pay from my regular job. How fast is that?
@johnqueen9420
3 жыл бұрын
Not bad. I saw that shiner at 1:30 tho 👀
@cdnroofer
3 жыл бұрын
A lot of blow through on the nails. Great if your fast, great if you can nail in the “nail zone”. But no so great when a 50+MPH wind comes through. Shingle manufactures won’t warranty on over driven or under driven nails. Quality vs Quantity ppl.
@laurelbrennan6295
2 жыл бұрын
As a business person I can appreciate the need for speed in getting the job done quickly, but as the homeowner, I would appreciate the job done without mistakes that could cost me money in repairs in a few years.
@BueBue701
Жыл бұрын
I usually make sure to pull any shingles that had a shiner if it happens, but since this was a one square challenge, I went back and pulled the shingles after taking the video. Quality always counts
@theroofguru807
3 жыл бұрын
Good smash for sure. Couple shiners and few other small issues. But that's to he expected when your smashing like that
@qmax-en5ry
3 жыл бұрын
He can easily nail 3 bundles under 3 minutes with a helper. Last time I check my time ,I nailed 66 bundles of shingles and 2 bundles of starters with a helper. In 7 hrs.
@watcher7185
Жыл бұрын
I can do that in 8 hours without a help
@elianhernandez2115
Жыл бұрын
Awesome work buddy. Roofing ain’t easy but there’s good money to be made!
@sergiojuarez59
3 жыл бұрын
Real respect bro, I do roofing too but I'm not as good as you I have to say it
@GioGio-pt4dr
8 ай бұрын
Just bought that gun haven’t used it yet is that gun better then metabo? And good work good speed 🔥
@BueBue701
8 ай бұрын
One of the best nailers on the market. I used to use Hitachi/Metabo, but they were breaking within just a couple months. I can usually get 6-9 months of use out of a Max, and I love that I don't have to go back and pick up the last nail that drops out of a Metabo. It might take a second to get used to nailing with it because of that fat rear end on it, but once you have your nail rhythm down, it's smooth sailing, and you won't want another Metabo on your roof.
@GioGio-pt4dr
8 ай бұрын
@@BueBue701 metabo sucks for 3/4 nails
@kylekoverola8654
4 жыл бұрын
Phucken awesome! Love the max!!!! Only super roofers can use!!!
@Alex-rq9jj
4 жыл бұрын
Dude setting records out here all in 6 min and 15 seconds he had like 10 low nails, 30 shingles that were completely crooked and over exposed.... but hey at least he did it fast fuck giving a homeowner an actual good product installation, roofing needs to change its sad to see hundreds of these videos and almost every one of them is just showing how fast u can fuck up someone's roof.
@castillollc2366
3 жыл бұрын
Stop making it such a big deal the nails landed where they were supposed to be 6 nailed he might of have a low nail or 2 but I’m pretty sure he replaced them and his shingles were not crooked those are chalk lines to come out straight at the ridge eve and the whole piece is straight.
@Alex-rq9jj
3 жыл бұрын
@@castillollc2366 I've had enough people work for me that do shit like this that I know full well unless someone makes him fix those he's not going to
@johnandjami1767
3 жыл бұрын
Good for some repairs in future keep up what u thinks a good job lol
@Daily_verse_20
3 жыл бұрын
It’s not about who can do it the fastest more like who can get the job well done My guy quick but need a little more practice keep it up man
@kylekoverola8654
4 жыл бұрын
Nooooo, I watched and commented. U had a happy face nail show!!show that happy face some caulk! Cheers
@BueBue701
4 жыл бұрын
I actually went back and addressed that shiner by pulling that nail, resealing the hole, and placing a backtab under the hole to seal it completely off before nailing a new nail into place. I felt like a scrub posting such a HUGE shiner. 😂
@anthonyrebock5351
2 жыл бұрын
Okay kidz....what did we learn from the man on the roof....Andy? Smoking makes you go fast ....very goog Andy. Now go out and buy a pack of Marlboros
@BueBue701
2 жыл бұрын
I used to smoke L&Ms. Only the 100s though. They made you really fast. 🤣
@kevinsmith5202
Жыл бұрын
Yeah lefty!
@gabrielhernandez5045
4 жыл бұрын
Not bad 👍
@ivanzepeda6216
Жыл бұрын
Say you want still think he did good most of the haters would be able to even stand up on that pitch of a roof good job 👍
@NWIVeteranConstruction
4 жыл бұрын
straight killer! can't wait to see you and your boss in action at the roof Olympics. did you tell him about it? its gonna be fun with a cash prizes and more..as everything stands he's got the most unbeatable time! I have a video on the details if he's curious.
@BueBue701
4 жыл бұрын
He doesn't know if he wants to go. He's competitive, but too humble to try and compete for money. Plus, we shingle year round, and closing shop for a couple days would not be possible with the rest of the employees. "Cats gone, mice play" sort of deal. I on the other hand will be making the trip to compete. I was thinking you should do a double wall flashing event with a sewer jack and roof vent for the finals. Make it a challenge on technical skill, precision, and speed. Wouldn't be too hard to slap a couple of the used pieces of plywood on the sides of the frames to do so.
@NWIVeteranConstruction
4 жыл бұрын
@@BueBue701 if I raise enough money for the comp tell him I'll helpn pay for the trip. We can do it over the weekend too. This ain't no 3 day event. It's only 1 day. And I think we can incorporate that in the next coming years. For now I think we need just do the heats. And top 5 get to go head to head one more time for the championship
@BueBue701
4 жыл бұрын
@@NWIVeteranConstruction haha I'll talk to him about it. It'd be drive down Friday, compete on Saturday(?), church on Sunday, and then drive back Monday. Plus, the money isn't the issue. It's more planning than anything. Wife and kids for the most part.
@NWIVeteranConstruction
4 жыл бұрын
@@BueBue701 for sure that's why I want the weekend gig.
@davidlysohirka798
4 жыл бұрын
Did you tell him? Lol....how they congregate!
@chrispauchay9037
3 жыл бұрын
Mad beast bro! I enjoyed this challenge. Upload more! I'll subscribe!
@alejandrodelcid9449
3 жыл бұрын
Nails in the line. Excelent
@bradstarbuck7933
2 жыл бұрын
Improper installation. 3 feet from top, first run, shiners!!
@nikogabaldo3300
4 жыл бұрын
Nice! Southpaw!!
@emanuelgomez1458
4 жыл бұрын
Chingon amigo mis respetos
@melvinmaldonado9129
3 жыл бұрын
🤣 donde ayo desos sigarros
@c5tv674
4 жыл бұрын
All that, and didn’t even need real oxygen...running on straight cigarette smoke...impressive
@crimsontide9532
3 жыл бұрын
It be like that sometimes
@sada401
3 жыл бұрын
Hell yea
@kirillvm1738
3 жыл бұрын
Молодец! Поймал волну )
@Fehrfamilyhomestead
4 жыл бұрын
How do you like the Max SuperRoofer?
@BueBue701
4 жыл бұрын
I love it. I used to be a die hard Hitachi guy for years, but after having them shell out on me within a month or two, I had to start looking for something that might last longer. They're a little cheaper and last 6-8 months if maintenanced properly.
@Fehrfamilyhomestead
4 жыл бұрын
@@BueBue701 nice, I just bought a Max SuperRoofer as well after reading a lot of good reviews on it, I was gonna buy a bostitch, but figured I'd try out the Max and so far it's good.
@BueBue701
4 жыл бұрын
@@Fehrfamilyhomestead hands down best switch in nailers I have made. I had a Bostitch last me 2 weeks the last time I used one. Seals and piston pretty much crumbled.
@davidO1977
4 жыл бұрын
I got a super Max as well , no complaints!
@davidO1977
4 жыл бұрын
Killin it
@eastside0434
Жыл бұрын
This just proves he wont tie off his harness.
@BueBue701
Жыл бұрын
I've got 10 years on a roof and only fallen off one house while removing snow. (Hard to tie off on a house like that) but these days I do rope off. Not because I want to, but because OSHA fines are ridiculous.
@Lifes_Apprentice
4 жыл бұрын
pretty goddamn good. couple low nails but on a speed run your have that. nice work you can go faster i see it!!!!
@BueBue701
4 жыл бұрын
Yeah, I gotta stop dropping my gun. It is hands down causing most of my problems. Lol
@Lifes_Apprentice
4 жыл бұрын
@@BueBue701 your fast! i have #onesquarechallenge videos too. watch them. where you at? midwest?
@BueBue701
4 жыл бұрын
@@Lifes_Apprentice definitely will give your vids a view! Yeah, I'm out of North Dakota.
@mikefrech1123
4 жыл бұрын
When I was roofing we didn't allow smoking on the roof, for obvious reasons.
@williamcutrell7456
3 жыл бұрын
its not really obvious
@markmark7708
3 жыл бұрын
I use metal in the valley and have never had a leak but have fixed many leaks from valleys having no metal , I wouldn't let him shingle a dog house though the shingles are straight the roofing job in its entirety is half assed not to mention the poor quality work of an air gun as opposed to hand nails which are much more secure
@richh9904
Жыл бұрын
Not even tied off. You cowboy.
@orlandovelasquez9020
3 жыл бұрын
Clavos a la vista
@tonyaburnside1037
3 жыл бұрын
Doing all that really fast and the cigarette in his mouth at the same time wow
@jjsroofing860
3 жыл бұрын
That Max is a good nailer but very loud. Mr. Legit is the only guy I ever see use the gauge on the nailer.
@thearmstrongway5026
3 жыл бұрын
That a roof with no warranty???
@davidlysohirka798
4 жыл бұрын
Stagger looks tight.
@El30inta
3 жыл бұрын
Good job
@jjsroofing860
3 жыл бұрын
👌
@Aaron-fb1pq
4 жыл бұрын
One hand shingling like a boss, did you develop that style so you can work on the same face as right handed people?
@BueBue701
4 жыл бұрын
My boss actually taught me to shingle this way. (He's a lefty as well) it just comes natural to shingle left to right. Kind of like writing or reading.
@jorgearaujo7043
3 жыл бұрын
More like “fuck it “ to your errors lol
@christianfelix6042
3 жыл бұрын
Dejaste clavos abajo,puede haber filtraciones después.
@Silver-MonkeyMan
3 жыл бұрын
Code is 5 nails per shingle.
@MiguelPerez-dv1co
3 жыл бұрын
At 1:33 you can see that the nail is under like where the shingles ain’t covering. Someone is going to have a leaked soon lol no point of being fast if you ain’t probably nailing the nails where they’re supposed to be nailed at.
@javiertorres-sn9fx
4 жыл бұрын
Muy bien
@kriskrush3970
3 жыл бұрын
ive been roofing for over 20 years !!!!!!!!!!! its great to be fast !!!!!!!!!!! but accuracy is more important!!!!!!!!!!!! tons of blow throws !!!!! tons of low nails!!!!!!!!!!! but good on you!!!!!!!!!! i think the only thing perfect in this video was !!!!!!!!!!!!! he never dropped his cig!!!!!!!!!!!!!!
@ronbarker9103
4 жыл бұрын
Would love to see him do a 12-12 that fast not then I'll take the Squire challenge
@redeyez8288
Жыл бұрын
That shinner well lots of shinners lol.
@codyadams5966
4 жыл бұрын
Needs to slow down he's leaving exposed nails .
@adriangalicia8736
4 жыл бұрын
Nesty job mi frend
@viper78dontthreatonme79
Жыл бұрын
Okay now let's see with 3 tab.
@joeylafleur5353
3 жыл бұрын
I seen he shot some low nails. Speed is repetition and repetition Is speed. U don’t try to be fast you just gotta be fast.
@phelixr4249
3 жыл бұрын
I noticed all the wasted material ran through the other side of the valley. Jump that setback forward and reset the valley. Save your customers and your business some money
@TheDiddles25
4 жыл бұрын
Oof big shiner at @1:26
@BueBue701
4 жыл бұрын
Yeah, I had to go back and fix that. Felt like a scrub after I posted a big nasty. Lol
@jaimecalixto8900
3 жыл бұрын
Chingon el gavacho
@TheBearGrylz
4 жыл бұрын
Very nice speed. But who the fuck still uses felt paper?? Killed it though. You run a Milwaukee?
@TheBearGrylz
4 жыл бұрын
Or that the super roofer max or whatever.
@BueBue701
3 жыл бұрын
@@TheBearGrylz unfortunately I have to use what the contractor supplies on new construction jobs. I would rather use Top Shield synthetic. Yes, that's a Max nailer. By far the best nail gun I've used.
@fattfish9517
Жыл бұрын
Firred
@mariogonsalezdelacruz2022
3 жыл бұрын
Chingon compas mis respeto
@oscarpaz5703
3 жыл бұрын
Impressive but you got one shinier.
@robertfaist5985
4 жыл бұрын
I bet that valley smiles or frowns like an emoji, you can't go straight going one row all the way up, gotta take 2 rows at least
@BueBue701
4 жыл бұрын
Or you mitigate that by thinking ahead and snapping control lines, as I do on every inch of roof i shingle. Two things I've learned in my years of shingling. Those who don't snap lines tend to have the most wavy roofs I've come across. Those who do snap lines don't end up having dips and dives, eaten shingles, or unmatched dormer peaks. Preparation is half the battle. 😉
@howardmurphy2841
4 жыл бұрын
Put paper on straight u can go one row all day long
@gamesforfun3680
4 жыл бұрын
He snapped lines all,the way across
@bornlegacyf3390
4 жыл бұрын
What is snapping lines
@robertfaist5985
4 жыл бұрын
@@bornlegacyf3390 lol
@stevescott1962
3 жыл бұрын
You're good, better than me all day, but 1 thing i do that you don't, KEEP YOUR NAILS AWAY FROM THE SEAMS u gotta know where your seams land so you don't put a nail there, not saying you don't know this already but a lot of repairs i go do is because of poorly placed nails
@stevescott1962
3 жыл бұрын
My old man instilled that in me he couldn't emphasize it anymore lol
@lifeonlifesterms8484
3 жыл бұрын
I seen a low nail on that one bud
@davidlysohirka798
4 жыл бұрын
Faster faster!
@haviervillalobos321
3 жыл бұрын
Done for one square rest of year all slow smoking a pack a day with 6 breaks cause his back is shot.
@lifeonlifesterms8484
3 жыл бұрын
U need to bring those nails up a 1/4 inch bro
@entretenimientotvshow7391
3 жыл бұрын
Solo le pones 5 clavo son 6 o 7 y dejaste un clavo afuera muy abajo no está bien todavía le falta
@aaronperreira9264
3 жыл бұрын
See you had a few low blows try to keep it above the belt
@pablovargas3990
4 жыл бұрын
Lol what a SHIT is that????!! Leaks everywhere!
@BueBue701
4 жыл бұрын
🤣 Yeah? Considering there are no nails near the seams. All nails are on the nail line. Except for one which was an obvious shiner that I went back and fixed after the video. It's easy to type on your keyboard calling someone else out on their work. How about you put down your phone/laptop and get back to work and learn the trade before you take the time to critique someone else's work. 🤷♂️
@cstone2109
3 жыл бұрын
@@BueBue701 not gonna lie ur first few shingles u put some fucked up seam nails that blew thru that’s definite leaks
@joemomma2517
3 жыл бұрын
Step in the valley more I don't think it doin enough damage
@angelmedina3367
4 жыл бұрын
That paper sucks and sliding the shingles from half way down to were you are is better than putting them on your shoe. I'll give you a 7
@tntlife73
3 жыл бұрын
1:33 shiner
@castillollc2366
4 жыл бұрын
Fucking beast someone finally close to my pace
@pauld8379
Жыл бұрын
Fast but sloppy.
@Jam-lc9gf
3 жыл бұрын
Bros back finna be gone
@leonardorufino6254
3 жыл бұрын
Que no tenia que cortar el papel si no lo cortas queda una bola o no bueno los que saben me entienden los que no saben yo les enseñó
@dagopulido5952
4 жыл бұрын
Nailing ecxelence right on it congrats.
@brandonb4739
4 жыл бұрын
Lol shiners everywhere and missing nail line, horrible job
@BueBue701
4 жыл бұрын
🤣 right... you see that little blue line right above the finish product? That's the nail line on Tamko, and my nails are on or within a 1/16 inch of the nail line.. Not halfway up the shingle. And 3 shiners is FAR from everywhere. But nice try. If you think you can do a better job, post a video. Until then you're probably just another bitter laborer who does prep work. ✌
@krd1090
3 жыл бұрын
O
@krd1090
3 жыл бұрын
O
@gudeliovelasquez3445
4 жыл бұрын
I don’t what’s the surprise to me I am impressive but if I see someone do a little bit of everything about construction that’s what surprise me because not many can do that but roof?n please I can train a monkey to do that job
@stevescott1962
3 жыл бұрын
Sometimes you're not always paying for the job but for the skill knowledge time etc the contractor has and a lot of times you get what u pay for I'll pay a little extra for quality vs your crew of monkies lol
@joseorduna8934
3 жыл бұрын
the guy got an exposed nail and that's how he left his shingle bad work😬😬
@BueBue701
3 жыл бұрын
You do realize I saw that shiner and went back and corrected my error... I wasn't going to stop to fix one shiner at 1:36. You people kill me about that one shiner. Like none of you have never shot one. 🤣
@mariogonsalezdelacruz2022
3 жыл бұрын
Alguien me da su numero eso chingones aver si me dan chamba tambien
@davidlysohirka798
4 жыл бұрын
3"-5"
@999shawn
3 жыл бұрын
yeah I stopped watching at 1:26 how'd u miss that exposed nail? thats why u don't drink beer on your lunch break
@BueBue701
3 жыл бұрын
I can't take you serious when you have a picture of a Master Splinter look alike for a profile. 🤷♂️ I had 3 shiners which I took tare of after I finished the video. Nail line is almost on the finish line for Tamko, so that's where my nails will land.
@drywallchannel6071
3 жыл бұрын
Bean bien Los clavos que deja ala vista
@NK-yz7qr
3 жыл бұрын
so 1 square=1 cigarrette
@rterry2752
4 жыл бұрын
Nails are way too low there dude !
@anthonycannestro9440
4 жыл бұрын
4-5 nails? Wrong nail pattern you got nails at the seams and that is not a 7/12 where you at Puerto Rico?
@stevescott1962
3 жыл бұрын
I noticed that too but all and all he's not bad
@ticoapacionado
4 жыл бұрын
Medio bulso de herramientas,, ósea medió roofer
@americanskull4138
3 жыл бұрын
Been fast is not the key for doing a good job.he had 2 low nails and he just leaved it like that.bad job
@matthanson5025
3 жыл бұрын
And your nailing backwards
@BueBue701
3 жыл бұрын
Please, digress how am I shingling backwards? I'm lefthanded running a left to right section, and I'm working from the finished end out. Sounds like you have been shingling for a day or two and now think you know the whole aspect of roofing. Go clean up the ground.
@ПРИЗНАКИРАЗУМНОЙЖИЗНИ
3 жыл бұрын
А защитную пленку с клейкой части кто снимать будет? 🤔😱 Халтура.
@andreyk976
Жыл бұрын
У данной фактуры кровли нет защитной пленки,называется драконий зуб,халтурят они в том что расстояние между следующим гонтом должно быть не меньше 15 сантиметров иначе могут быть протечки,но там никто не заморачиваться, гарантия прошла и слава богу
@alonso4134
4 жыл бұрын
Leaaakk
@ManuelMartinez-co1pu
4 жыл бұрын
Gaf
@greytogray3476
Жыл бұрын
Look at all the nails, not on line and a shiiner at 1.35.. not good.. fast is not the goal !detail dude not quick.
@EstebanGonzalez-ph9xp
3 жыл бұрын
No ese güero no trae nada
@mattowens3451
Жыл бұрын
Guys nailing straight runs like it's something to brag about. I leave that straight shit for the new guys cause it's the easiest thing to do on the job.
@BueBue701
Жыл бұрын
🙄 i suppose you just sit in the truck when the whole job is a straight run? It was called the one square challenge... hence one square being laid in the video. If it was a "how to flash fast or run a valley" I would have been doing that.
@johnwilson4340
2 жыл бұрын
how on earth is that a 7/12 rofl thats a 5 or 6/12
@KraveSanity
Жыл бұрын
Horrible quality, wtf is that nailing there’s shiners everywhere
@BueBue701
Жыл бұрын
Tell me you high nail your shingles without saying you high nail. There were 3 shiners, which I will admit to
@KraveSanity
Жыл бұрын
@@BueBue701 exactly, 3 shiners too many.
@cjhooker75
3 жыл бұрын
And let's stop these one square challenges and start the detail challenge. That's where you hacks get exposed. Show us how you roof around a chimney
@cjhooker75
3 жыл бұрын
So slow. That Max has a gauge on it. Use it
@cjhooker75
3 жыл бұрын
And you folded the top shingle over the opposite side. Which is a big no no. You're adding unnecessary layers that prevent your ridge cap nails from sinking all the way
Пікірлер: 169