International made the T444E on bigger platforms without routing the CCV into the intake. This is a great and perfectly sensible mod.
@markbroad119
2 жыл бұрын
I have a '95 7.3. tapped a barbed fitting into passenger valve cover, ran a hose down the frame trail and welded a pipe into the exhaust, put it in about 6" into the pipe. Back by the bed to cab section
@GillansGarage
2 жыл бұрын
I’ve heard of people doing that. That works too!!
@markbroad119
2 жыл бұрын
@@GillansGarage clear hose so I can see oil in the low spots to tell me it works
@bigdaddydaddy3203
6 ай бұрын
Love watching this video I have a96 7.3 I’m going to do this to mine sending u a thanks from Philadelphia 👍🏼
@chriscraft4236
20 күн бұрын
I think this is an excellent mod that actually came from the manufacturer of the engine 👍🏼 But somehow didn’t make it to the Ford pickup truck line. I’m going order and install for my 97, however I will attempt to reverse the valve covers to gain a better fit. Curious if you attempted a valve cover swap? Excellent video thanks for making it!!
@dougrogillio2223
4 жыл бұрын
'Preciate you posting this.
@GillansGarage
4 жыл бұрын
Glad it was helpful!!!
@SunriseCrawlers
4 жыл бұрын
Thank you. I was just looking at those today they are 340 on Google and only 99 on eBay fixing to order one now thank you
@GillansGarage
4 жыл бұрын
James Ferm Glad to help!!
@davem3789
4 ай бұрын
Dual CCV mod per Custom Works is the best way.
@GillansGarage
4 ай бұрын
If I know find another one i’d consider that.
@therealaustinbrown2712
3 жыл бұрын
Awsome truck, Awsome video! Thank you
@GillansGarage
3 жыл бұрын
Thanks!!!!!!
@andyschreyer4615
3 жыл бұрын
Grateful for the idea and I was confident that this would help because it looked like a solid solution to keep the boots from constantly popping off from oil. Nothing but love for Gillan's Garage but do your research. There are a number of folks in forums having major issues after installing the Racor CCV3550 which is what this part is. I am one of those cases. I installed this and started experiencing major pressure issues which created oil leaks in places that were not leaking. I had to replace o-rings on the turbo pedestal and delete the ebpv which were not a problem until doing this CCV mod. Never interrupt hallowed ground! The haunting is real
@GillansGarage
3 жыл бұрын
I saw those forums after the second video and I’m looking now at upgrading to a better setup. The last thing I need is more trouble!! Thank you for the advice!!
@josephoverstreet5584
Жыл бұрын
It sounds like you had to replace things that commonly fail on all 7.3 and you haven’t changed it yet. Do your research to know ccv is thanks to the epa and wasn’t done on the medium duty trucks.
@drshocker600
4 жыл бұрын
Very clean build.
@GillansGarage
4 жыл бұрын
DrShocker 600 Thanks!!!
@tdotw77
7 ай бұрын
Ive never sen or heard of this international oem part before. Seems legit..only question is on your install, the rubber pipe is making a trap thats gonna keep catching oil residue potentially stopping it from making it to filter canister.. I've seen a bunch of people do the ccv mod & just use a generic ccv catch can setup off the shelf....or just dump into atmosphere under truck, or into exhaust pipe. I think just using a catch can would solve the problem. Idk, i gotta deal w\ like ten+ other issues on mine before worring about a lil oil in my intake tube & intercooler.🤷🏻♂️👍🏻👌🏻🛠️🛠️🦺🚜🤔😎🛢️
@tdotw77
7 ай бұрын
Nevermind on the trap, it's after the filter. I answered my question already. 🤦🏻♂️🤔🛢️
@GillansGarage
7 ай бұрын
I’m glad you got it figured out. It’s a bummer it’s discontinued now.
@jasonslater1353
4 жыл бұрын
Great video.
@GillansGarage
4 жыл бұрын
Thanks!!!
@teewoods9846
3 жыл бұрын
thanks for sharing. i now want to do this.
@andreimtriscas6626
2 жыл бұрын
I have that assembly on my 99 f350 but, can't find the replacement filter
@andyschreyer4615
3 жыл бұрын
Thank you for the video and the great idea! I’m going to install mine in a week or so. Would you be willing to share which intercooler pipe clamps and boots you’re using? Those clamps in your video look a lot heavier duty... are those BD-Power? Thanks!
@slowwhite_7.321
3 жыл бұрын
Thanks for the information on this!
@tclowrance
3 жыл бұрын
What did putting the 3.73 gears do for your truck?
@GillansGarage
3 жыл бұрын
I did pick up a little fuel mileage running empty, however when the camper is hooked up the power band seems to be around 70MPH which can be hard to hold in the mountains of PA. That’s with the ZF6, of course, that has a deeper overdrive(.72). I think with the ZF5 overdrive(.75) pulling with the camper would be a little easier. Overall though I’m happy with my choice especially if I do a Cummins swap.
@josephhickman9568
3 жыл бұрын
How is the transfer case hooked to trans? Wanting to convert my 99 2wd zf6r.
@GillansGarage
3 жыл бұрын
Honestly I don’t have a good answer, I used a 4wd transmission for the swap so the transfer case bolted right up.
@natedawg9806
3 жыл бұрын
You would have to get a 4wd tail housing
@tdotw77
7 ай бұрын
Need a 4wd output shaft\housing. Or do a divorced transfer case setup & make everything custom(mounts, driveshafts, brackets, linkage, etc). It can be done, but factory stuff is easier & simpler.
@gry8ruth
3 жыл бұрын
This may be a stupid question to please forgive me, I'm fixing to pick up a 97 psd myself so I'm learning all I can. Is this like a catch can equivalent? I guess I'm asking if it serves the same purpose?
@GillansGarage
3 жыл бұрын
As far as I see it, it works the same way. However I’m not expert. I’m going to do a follow up video showing how it’s working so far.
@gry8ruth
3 жыл бұрын
@@GillansGarage well you've earned a subscriber lol. Thank you for the response
@GillansGarage
3 жыл бұрын
Thanks!!!!! I appreciate it!!!
@jacobn516
2 жыл бұрын
Did that floor mat come with the truck if not where'd you buy it at
@GillansGarage
2 жыл бұрын
It came with the truck when I got it. It’s a fantastic mat though. The only marking on it that can see is “6881” if that helps with a search at all.
@xxxmikeyjock
3 жыл бұрын
if you are filtering it why not dump it to atmo? the oil in the intercooler is not good but the damage it does to the boots is the real issue.
@GillansGarage
3 жыл бұрын
It’s my understanding the filter is just trapping the oil and giving it a chance to drain back into the valve cover but allowing the vapors to be burning during combustion. Frankly the biggest reason I didn’t like dumping into the atmosphere was the odor it omitted if the truck was sitting idling or low speed backing with the camper hooked up. I completely agree with the oil causing issues throughout the entire intercooler system.
@christopherhenkelman5015
3 жыл бұрын
So you have had it on for 5 months any improvement of keeping oil out of the intercooler I just installed my intercooler so curious if it helps
@GillansGarage
3 жыл бұрын
Honestly the truck is parked for the winter. I didn’t hit enough miles for an oil change since the install. I plan on an oil change in the spring but I can pull the filter and the intake and check the spyder for oil residue and do an update video.
@christopherhenkelman5015
3 жыл бұрын
@@GillansGarage sounds good I liked your page so I’ll keep an eye out my truck should be on the road again by spring so thinking I’ll just prob do it for the 100$ bucks
@linogarcia2478
2 жыл бұрын
Any updates on how well this set works? Any problems with the turbo seals leaking? Thanks
@GillansGarage
2 жыл бұрын
So far so good. I’ll be changing the filter next week when I change the oil.
@mr_big_pea_pea4013
2 жыл бұрын
@@GillansGarage A Link to the kit & Filter would be greatly appreciated. Or even a ph#. Called local international parts dealer & they said they needed a part#. I gave them the GDTCCV003 kit and no luck. Any help with a link or ph#. Thanks.
@GillansGarage
2 жыл бұрын
I wish I could but it would seem to be discontinued.
@mr_big_pea_pea4013
2 жыл бұрын
@@GillansGarage that’s what i keep running into. Thanks.
@GillansGarage
2 жыл бұрын
@@mr_big_pea_pea4013 the filters are available if you can find a secondhand one somewhere.
@gregmenniges5963
Жыл бұрын
No filter on mine. I just dumped it out into the atmosphere. No filter to worry about. I ran the hose down to the frame and zip tied it off
@GillansGarage
Жыл бұрын
That works too. I did that for about two days but didn’t care for the odor it emitted. It’s a bummer they stopped making this filter kit.
@tylerdunn6578
2 жыл бұрын
Nice ride man
@GillansGarage
2 жыл бұрын
Thanks!!!
@jameshudson9479
3 жыл бұрын
Nice
@tracymawer6980
Жыл бұрын
It would appear since I'm seeing this video 2 years later that part has been discontinued or at least I'm not finding it
@GillansGarage
Жыл бұрын
I believe it was discontinued shortly after I made this video😕
@tomstewart4820
3 жыл бұрын
Good video! How often should the filter be changed? Any idea?
@GillansGarage
3 жыл бұрын
I don’t put a ton of miles on my usually so I plan on pulling the filter when I change the oil. I have checked the pop out indicator several times while checking oil levels and it hasn’t indicated a need to change it yet. I can post a follow up video when I change the engine oil to show what it looks like after about 5k miles.
@tomstewart4820
3 жыл бұрын
@@GillansGarage that would be great!
@Uneek637
3 жыл бұрын
@@GillansGarage I'll be looking forward to that video.
@arturo5472
Жыл бұрын
I lost one of the clips that hold the lead and i can't even find the replacement filter for this thing anymore and as far as I know this setup is no longer available 😢
www.ebay.com/itm/115146279595?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=h3QWElDgROa&sssrc=2349624&ssuid=y6R6w8UnS0i&var=&widget_ver=artemis&media=COPY New filter
@arturo5472
Жыл бұрын
That John Deere unit sure is a lot more expensive but it's good to know I can still buy a replacement filter thank you
@bparkinson1234
3 жыл бұрын
Hey. Where did you get this? Tried google. Don’t see it. Thanks
@GillansGarage
3 жыл бұрын
Apparently they are not made anymore. I’m sorry.
@alfonzacorn
2 жыл бұрын
It's not a braided line it's a line that has a wire in it where it won't crush because the wire is holding it open
@natedawg9806
3 жыл бұрын
Where did you get the trans from
@GillansGarage
3 жыл бұрын
I got the transmission out of a 1999 F-350 7.3 4x4 dually truck.
@caribouprecision8213
3 жыл бұрын
Man, I cant find the kit anywhere. Did you get yours on ebay? Seem to be sold out.
@caribouprecision8213
3 жыл бұрын
Ahh, yea, filterbarn.com closed, bummer.
@Truckinevan2005
4 жыл бұрын
Would love a vid on the ZF6 conversion!
@GillansGarage
4 жыл бұрын
Truckinevan2005 Thanks, I’ll get one together.
@Swerve1982
3 жыл бұрын
Yes. I have an 01, and this is still something I want even though my automatic is strong
@GillansGarage
3 жыл бұрын
Ford OBS F-350 ZF6 swap install overview
@tjr9741
Ай бұрын
This kit is now discontinued, got damn it
@cbcb685
3 жыл бұрын
I just watched your racor video and thinking about doing it, my question is how is it working out for you now? TIA
@GillansGarage
3 жыл бұрын
I think that so far it great!! However apparently the kit is discontinued and can longer be bought?!?! The filter can be found so I should be ok for a while. I might revisit this modification and install a remote catch can.
@cbcb685
3 жыл бұрын
Thanks for the reply Gillan, sounds like you need to stock up on filters if it's working good for you. I definitely liked the clean look of the racor, seemed like a well thought out little deal. Sucks about the discontinuation of it. Looking like catch can for me now. Thanks again
@ceetwarrior
3 жыл бұрын
Great video. I searched for this part and it's obsolete now. :(
@GillansGarage
3 жыл бұрын
I just did the same search to no avail either. That’s crappy!!! I can find the filter but not the whole assembly.
@JoseRodriguez-yp2ss
4 жыл бұрын
So what’s your opinion thus far of the ccv it?
@GillansGarage
4 жыл бұрын
So far so good. Honestly, I haven’t taken the Intercooler system apart to see if there’s less oil residue but oil consumption is down.
@JoseRodriguez-yp2ss
4 жыл бұрын
Gillan’s Garage cool. Thanks for the reply. Are you planning on doing a video taking apart the intercooler system to see if this is a mod worth doing?
@GillansGarage
4 жыл бұрын
Great suggestion!! I can do that. Next on tap is the ZF6 swap overview, I had a request for that too.
@JoseRodriguez-yp2ss
4 жыл бұрын
Gillan’s Garage cool. Looking forward to it. Good luck.
@GillansGarage
3 жыл бұрын
I pulled the intake pipe off yesterday and the intake piping looked pretty much oil-free!! I’ve pulled the camper a couple times and couple scrap runs. Also oil consumption seems to be better.
@antonkristijanto9486
6 ай бұрын
Rubber hose all you need. Just more shit in the engine bay you don't need
Man, you're awesome, I was looking for it like crazy. Have you tried it?
@GillansGarage
2 жыл бұрын
@@andreimtriscas6626 I can’t really take the credit, someone here on KZitem told me where to find them. He deserves the real credit!!
@LandSurfer96
4 жыл бұрын
Insta-sub after this video!
@GillansGarage
4 жыл бұрын
Ol' Blue OBS Thanks!!!!
@Charmander606
Жыл бұрын
Thanks for the video. Anyone knows where I can find this part? Thank you
@GillansGarage
Жыл бұрын
I believe the best place to look is in a school bus junkyard. The 7.3 was used in tons of buses badged as the T444E. Good luck!!!
@cbr600rx7
2 жыл бұрын
I wonder if it would fit on a 99-03 superduty
@GillansGarage
2 жыл бұрын
If you can find one. That’s the hard part now.
@AlexShrugging
2 жыл бұрын
@@GillansGarage the alternative is www.amazon.com/gp/product/B01F2NZ6RQ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 www.powerstrokearmy.com/threads/ccv-filter-installed.53517/
@MikeCheck56
Жыл бұрын
Where did you find yours at?
@GillansGarage
Жыл бұрын
@@MikeCheck56 I found mine at the “Filter Barn” but they’re sold out now. I would check a bus junkyard, I’d say that’ll be your best bet now.
@2alawabidingcitzen
Жыл бұрын
Its discontinued 😢
@GillansGarage
Жыл бұрын
I know, it’s a super bummer!!
@2alawabidingcitzen
Жыл бұрын
@GillansGarage ima have to get a catch can then.
@roberthamilton1152
Жыл бұрын
Too bad I'm seeing this now.
@GillansGarage
11 ай бұрын
I was bummed to see they were discontinued too.
@80sfordguy
3 жыл бұрын
Gillian’s Garage, man if you ever want to sell the truck, send me reply on this message. I’d buy the truck quicker than blinking an eye. I’ve got a 85 F250 Lariat 4x4 single cab longbed with a 460, BW T19B trans & BW13-45 T-case with dana 44HD front axle an 4:09.1 and Ford 14-Bolt rear axle an 4:10.1. It’s a gas hog but I love the old man and I’m driving daily. Rebuilt the trans an t-case changed the clutch, all the engine gaskets due to leaks except the head gaskets and intake gaskets are the only ones that were good. Keeping mine stock, it still has ALL the emission equipment and it ALL still works. Probably going to rebuild the engine in a year though, it’s got 317,000mi on the clock and going. Other that initial leaks, rebuilding the factory Holley built for Ford 4180C carb last year it runs good with great oil pressure but, it stumbles every now and again because of one cylinder with lower than normal compression. I’ve done mild 4x4 riding when camping and a few long distance rides with no issues, now that the oil leaks are fixed doesn’t loose oil and doesn’t burn any oil either surprisingly. I’ve been looking for a OBS 7.3 quad cab long bed for years, there’s just none to be found in the New Orleans area.
@GillansGarage
3 жыл бұрын
Thanks man!!! I’m really hoping to finish the 4x4 swap then keep it for at least the next 20 years!!! But if decide to sell I’ll let you know!!
@80sfordguy
3 жыл бұрын
Gillan’s Garage gotcha man, I’m the same way with my old man, you can’t beat the OBS Ford trucks, their tough and last years with good maintenance and cleaning. I’m currently restoring a 85 Mercury Grand Marquis LS fixing rust holes in the top of my door post, passenger front & rear floor pans and removing the landau top all due to a leak from the front edge of the landau top. I’ve had it for 20 years, built the engine 0.030 over, RV cam just for a little more grunt without a lumpy cam idle, built the 8.8 rear axle with Yukon clutch limited slip and recently put a built AOD from monster transmission and restore all the emissions equipment back to factory including 2” catalytic converters. She purrs like a kitten with true dual 2” exhaust with factory H-Pipe for a 86 police package crown Vic, smooth & quiet dual 3-chamber thrusher mufflers and tail pipes over the axle to the rear bumper for the same 86 police crown Vic. Going to be adding a rear sway bar from that police crown Vic too soon. The only engine mod I’m going to do is a speed density 2bbl throttle body to mass air flow EFI conversion with GT40 heads, cam and intake from a Ford Explorer similar to that of the 87-93 mustangs. It’s only for a little more power a bit more low end torque and better fuel economy as well plus it’s all bolt on from another ford and easy to get factory parts if needed like sensors and gaskets. I’ve got a 86 2door Mercury Grand Marquis with the 5.0 EFI except it’s the stock low flowing upper & lower intake same as mustangs and it’s a speed density engine too. Speed density engines get crappy mileage and only make about 180hp. The explorer engine puts out about 325HP with the same block as the sedans, their all truck engines. The foxbody platform cars all had less durable blocks and crappy pistons. If I’m feeling up to it I might put a 351w block I have with the GT40 heads cam and intake and that would be the farthest I upgrade it because it’s my wife daily driver meant to be our family car not mustang. It’s an old paw paw car meant to cruise quietly, comfortably and have a little grunt when needed.
@reggiesmith6729
3 жыл бұрын
I have a F550 2001 I'm looking to convert it to a 4x4.im gonna order that catch can thanks.
@GillansGarage
3 жыл бұрын
reggie smith Good Deal! I’ve been pleased with mine so far.
@reggiesmith6729
3 жыл бұрын
@@GillansGarage Did you hear that the ccv mod will ruin your motor? Check out those video's out and tell me your take on it!! kzitem.info/news/bejne/lYermGF6q2WbeW0 kzitem.info/news/bejne/0ZdjmGZqjYCUlo4 With it tied back into the system it probably dose not apply, So it's probably better to see why you dont release the oil back into the atmosphere!!
Пікірлер: 122