So happy to see you back! Nothing but love and well wishes for Richard and Teresa
@richardteresacricheducatio3542
Жыл бұрын
Excited to be back thank you for your support
@Apolloneek
Жыл бұрын
Dude you have no idea how happy I am they are back. Thanks rich and Teresa ! Sorry you guys even had to stop but glad to see ya back
@josephd.4890
Жыл бұрын
ive been cheching the old channel every few months hoping, this video popped up randomly and Happy Dance!!!
@robertwriser7884
7 ай бұрын
@@richardteresacricheducatio3542where exactly are y’all located and how much does a rebuild like this go for. My 3rd gear grinds unless you double clutch or float it goin in and it is difficult to even get the truck into gear sometimes. As well as 4gear makes a scratching noice while getting up to speed.
@cdpperformance2613
3 ай бұрын
@@richardteresacricheducatio3542 I have a 96 dodge ram 3500 with the same nv4500 2wd trans had it built with new main shaft about 25k ago shop but the wrong fluid in it! And I put about 100 miles on it before i caught it 3rd gear has always grind since.. what’s a good rebuild kit to go with ? I’m really wanting to pull and just build it at my shop..
@michaelwallace3105
Жыл бұрын
Nice to see a manual transmission teardown for a change. Like to see more of that. Take care of that shoulder!
@infinity3jif
Жыл бұрын
Woah, I thought I'd never see this guy again. I'm glad their channel found me. It was just sitting over there in my recommended section and I clicked so damn fast🤣🤣
@richardteresacricheducatio3542
Жыл бұрын
We are excited that you found us too we are excited to be back thank you for your Support
@floydhenry2262
Жыл бұрын
great to see you guys back. U-Tube has been so boring without you guys. I wish you well in your new venturecan't wait to meet you in person.
@DasLuftVolks
Жыл бұрын
Been missing you Richard!!! Thought the worst when videos stopped but glad to see all is well and drama free. Seems like kids these days gotta learn the hard way, hope he grows up before too long.
@teamgrizzly2859
Жыл бұрын
What happened?
@denchru6055
10 ай бұрын
@@teamgrizzly2859 Trent (Richard's son) started the old KZitem channel and Richard got greedy and wanted all the money for himself. So he fired Trent and now Richard has everything he wanted. His shop and KZitem
@gillboardman8998
Жыл бұрын
So good to have Richard and Teresa back! Made my week🤙 This is Gill from Washington, you rebuilt my big, blue Roadmaster Wagon 4L60E last year and I gave you the Steve Morris "The Wagon" shirt. Let's see it!😁👍 Any chance you can upload the rebuild vid of my tranny? Still running fantastic. Definitely SUBSCRIBED!
@adamideus9222
9 ай бұрын
My transmission was already fucked up when I bought my Dodge I put 80w90 in it with synchromish
@zachgarris3773
Жыл бұрын
Big thank you to whoever got richard to come back and educate us. Listen close to him, his knowledge shaved 2 tenths of my ride. Thanks Richard
@RobertBeck-pp2ru
Жыл бұрын
That truck was abused and poorly repaired by others before it was dropped in Rich's lap.
@cuttnhorse2013
Жыл бұрын
I’m so glad to see you all. I must have missed what happened to you all? Ronnie, East Tennessee
@allenbrown7820
Жыл бұрын
Glad to see you putting videos back up. Missed watching you spread your wealth of knowledge. Best of luck to Teresa and you on the new venture! Be Safe!
@dgmcke3074
Жыл бұрын
Wow! Wizard at Manuel transmissions too!!
@ODGColornChrome
Жыл бұрын
Glad you're back Richard. Sorry about wharever happened in your fam.
@fourfortyroadrunner6701
Жыл бұрын
Wish you would show the puller setup on the 3-4 synchro hub. The Dodge book shows nothing. I purpously ended up possibly warping the hub removing it rather than endanger 3rd gear. It was TIGHT!! I have a 04 GMC and manual, the book has NOTHING on the teardown of a 4500!!! On mine, none of the Timken bearings were "finger pull." I was lucky to find 2X of the jaws of the special pullers on ebay cheap, and built the rest
@davidknowles2024
Жыл бұрын
nice to see you back i miss you hope you are well
@carltonlane8931
Жыл бұрын
Brilliant we missed you both.
@markusedma
Жыл бұрын
This is fantastic to see a video! All us fans were so sad not to watch you in action. Much love you two!❤❤
@shack_67
Жыл бұрын
Nice to see you back Richard
@ozzyfranf
Жыл бұрын
Glad to see you're back!!!
@therealxunil2
Жыл бұрын
Oh yeah! Richard is the MAN.
@chipper442
Жыл бұрын
Happy to see you walk in with the gloves on, those used oils and chemicals wreak havoc on the nervous system. Thanks for another great tutorial. You’d make a great shop teacher.
@haroldhawkins9370
Жыл бұрын
Glad that you're back to doing videos, miss you're experience on the transmissions.
@davidmashburn6890
Жыл бұрын
I’m glad to see back Richard I’ve missed your videos so much
@kenuber4014
Жыл бұрын
Well look who is back!! Good to see you guys again. I see the name has changed, but the same characters. Hope all is well.
@gszytk2571
Жыл бұрын
So happy your back!
@thecookmeister
Жыл бұрын
Welcome back. Missed you!
@CheezyDee
Жыл бұрын
Besides some minor differences, it looks like a really big Borg Warner T-5 world class without the funky shifter in the tailshaft.
@robertlawson4742
Жыл бұрын
Great to see you guys back. Love your videos
@richardteresacricheducatio3542
Жыл бұрын
Thank you for your support we are excited to be back
@robertmedina6875
Жыл бұрын
New sub here. Worked on cars for more than 25years. This old Dogg wants to learn new tricks lol. AWESOME VIDEO!!! Thank you!!!
@richardteresacricheducatio3542
Жыл бұрын
We’re excited that you found us we’re excited to be back
@billwalck1324
Жыл бұрын
Kinda looks like a low on oil situation. Real hot, excess wear on hardened surfaces leading to particulate contamination. Then all silicone sealing, the mark of the true hack in the old days save a few bucks on proper gaskets. Too bad for the customer worst thing for tapered bearings is to run them loose
@richardteresacricheducatio3542
Жыл бұрын
Definitely had a few places to leak out of
@wcmwfab935
Жыл бұрын
Where did you go. Glad we are doing a nv4500 need the nv5600 next
@anthonyeastham7960
Жыл бұрын
It sure is good to see you guys on here again! You all provide more and better info than any other channel. Wishing you all the best.
@xboxbml
Жыл бұрын
You’re back!!!! WOW!!! Good to see you again!!
@jeremyking5684
Жыл бұрын
You sure are a master! I've had 2 left shoulder surgeries and 1 right shoulder surgery, my left is still bad so I know what your talking about with shoulder problems. I've had both hands operated on and both elbows operated on.
@MitchellHanlon-j7n
Жыл бұрын
Hey bud I have 1998 dodge 3500 it has a 318 gas engine automatic transmission I have over 230,000 on truck not sure on transmission can I send the truck to you. And look at the rear end to. Thank you Mitchell
@jtb52
Жыл бұрын
Glad I found your channel back.
@happy543210
Жыл бұрын
Great to see you again! Keep those videos coming.
@paulblais8481
Жыл бұрын
So glad your back, Missed your videos. Can you do one on the A4LD Transmission.
@Hjfvvdst
Жыл бұрын
Great to have y'all back! Man that Trans looks like it has been worked real hard.
@tommitchell7087
Жыл бұрын
Scrolling when I found your video, really missed you guys! Great to see you posting content!!
@shaneschartel1593
11 ай бұрын
Are you guys still doing transmissions? I have a 92 a518 I’d love you to do for me!!
@merylpelosi8485
Жыл бұрын
This NV-4500 belongs in the scrap bin. It looks like it had the wrong lube in it, or no lube at all. It looks like this truck has been flat towed or allowed to coast down hills in neutral for way too long.
@MHolt3573
Жыл бұрын
I didnt even know they were back. This video just happen to pop up. Thank you for continuing on. What was the first video yall did so i can go back and watch them?
@truthboomertruthbomber5125
Жыл бұрын
Teresa, I am truly impressed that you could identify the cage of the pilot bearing!! You are awesome!
@richardteresacricheducatio3542
Жыл бұрын
Smart woman right there she’s a keeper R
@niveknospmoht8743
Жыл бұрын
Those pilot bearings are garbage---all of them. You can take a standard chevrolet bronze bushing and have it machined to fit. I have my local machine shop do 6 at a time for me. Till needed they sit in the drawer of my tool box
@davidnightingale2260
Жыл бұрын
It’s fantastic to see you back, I really love watching your videos and have learned a lot from you. You have a wealth of experience and knowledge that not many people are willing to share. I hope this is the start of more good things to come.
@swoopulater
Жыл бұрын
heeeey, glad to see ya'll back, missed ya man. will spread the word you're back 👍👍👍
@richardteresacricheducatio3542
Жыл бұрын
Thanks
@jandsmarineservicejimfromd4994
Жыл бұрын
Very happy to see you guys again! Missed watching your videos
@carltonlane8931
Жыл бұрын
Great to see the both of you,hope your new channel,work shop works out,I’m over the pond,but your videos are so informative,and this time try not to splash the wife,we all wish you all the very best.
@diverducker2984
10 ай бұрын
Been watching your old channel and hoping you would come back I checked every month or two I never knew you made a new one glad you’re back.
@samrugtiv3839
Жыл бұрын
Well done Richard I overhauled many of them at the dodge dealership where I worked .but after you work them over you got a dam good tyranny that will go for many years. Sam
@frederickowen8887
Жыл бұрын
Glad you are back!
@billiebobthemechanic
Жыл бұрын
Seems like there was some drama between you and the kid there at the end of the last channel. Glad I found your new channel. You’ve helped me out more than a few times digging into some 4l80’s and 4l60’s. Very Knowledgeable.
@chetbaker6432
Жыл бұрын
So glad to see you and Teresa back!! Best wishes!
@adamcarpenter5190
8 ай бұрын
First time viewer! The shim rings between the 5th gear and bearing at 11:17 are to properly space the bearing so the gears have the right amount of play/tolerance in the trans :)
@hunterharper1891
Жыл бұрын
So what happened with yall and the old channel? Yall were putting out videos seemed like every other day then just stopped. Good to see you again richard
@Whisper555
Жыл бұрын
I'm glad to see you and Teresa back Richard. I was wondering why "Precision Transmission" just suddenly stopped showing up. Guess you are here now. Hope you are keeping well? All my best to you all.
@magnoliav12
Жыл бұрын
I heard Precision went out of business, sorry to hear that. All the transmission problems I had ended up paying someone to F them up, only to go back over them and fix them myself. Can't seem to find a transmission guy down here in Houston who knows what he's doing.
@richardteresacricheducatio3542
Жыл бұрын
No, sir Richard retired, opened a new shop at his house, really nice shop
@DauntlessDefender214
Жыл бұрын
OMG it’s SO good to see you! God bless you all. ❤
@fourfortyroadrunner6701
Жыл бұрын
VERY annoying, none of the local so called parts houses, including NAPA, "could get" nor would they sell only the clutch disc. Mine was probably fine and the pp was great. I just wanted to replace it "because." I finally found only the disc at Rock Auto. Nearly 450-600 as I recall for a clutch "kit." I sold auto parts for 15 years in a previous life.
@darrylmonat5361
Жыл бұрын
Glad I found you again! Loved your previous channel, but things change. I see new shop? You moved? Gotta lookup previous video's to catch up.
@kevinfunkhouser4707
Жыл бұрын
This was a great video lot of information in a short amount of time
@richardteresacricheducatio3542
Жыл бұрын
Thank you very much
@michaelburton5760
Жыл бұрын
wow been wondering what happen love this im a gear guy nice to see ya back
@scottrittenhouse3131
Жыл бұрын
Glad your back!!!!!!
@tannertater1332
Жыл бұрын
What happened with the other shop? Are you retired and doing this on the side now?
@cavsh00ter
Жыл бұрын
FINALY FOUND YOUR CHANNEL YEAH!!!
@Riverman...
Жыл бұрын
They are back again!!! Lol
@coltlewis5871
Жыл бұрын
Nice video guys 👍. I’ve rebuilt a lot of manual transmissions and I always end up glaring at it for quite sometime to remember how it all works. They’re a bit of a mind warp and it’s really cool how they work. I’m surprised you can even get parts anymore, even 10 years ago it was difficult. Even the fluid can be difficult and it’s extremely expensive. The NV4500 is a strong transmission though, 5th gear and synchronizers being the weak points. Cast iron case, hard to throw around even with good shoulders. Glad you guys are still doing your thing 😎
@richardteresacricheducatio3542
Жыл бұрын
You’re definitely gonna shop around for parts Thank you for watching
@cavemanjoe79
Жыл бұрын
AMSOIL makes a GL-4 75W-90 gear oil for manual transmissions.
@coltlewis5871
Жыл бұрын
@@cavemanjoe79 Good to know! Thank you 👍
@12ValveJalopy
Жыл бұрын
Redline MT-85 is correct for the NV4500 and is fairly available, not super cheap, but not exorbitant either.
@mjh123crh
Жыл бұрын
Awesome to see you 2 beautiful people back at the videos... I loved watching and learning from you...
@koldphuzhun
Жыл бұрын
I just found this channel after missing the Precision Transmission channel. So excited to see videos coming again! Good to see the two of you back again! You were missed until now.
@gregscott9170
Жыл бұрын
You’re back?!!!! Yay!!!
@rockycourtney3110
Жыл бұрын
I have one of these and it keeps blowing oil out of the vent I. have had it gone through with the upgrade to mainshaft. Talked to several local shops no one knows why , do you?
@Rem1061
Жыл бұрын
So what is the correct name of your shop?
@hayzersolar
Жыл бұрын
awesome new videos great to have you back
@Z-Bart
Жыл бұрын
Your new channel is growing fast. Glad to see you again.
@aw9680
Жыл бұрын
Richard! So good to see you back in front of the camera! It took KZitem 4 months to get you into my feed. I'm so excited to see you share your knowledge. Don't be afraid to cover stuff you had on the old channel. Even after watching as many of your 4l60 tear downs, I am still riveted by your presentations. Glad you're back!
@dgmcke3074
Жыл бұрын
I learn something with every video-so glad ur back
@donaldsingleton2161
Жыл бұрын
Great to see you an Ms. T back. These videos you do help refresh a old man's mine .😊 God Bless you two.
@kmack747
Жыл бұрын
So glad to see the master back i have been going through withdrawal from your excellent transmission videos
@pantherplatform
Жыл бұрын
I pulled a 14,000 lb excavator up some pretty steep hills with my stock 4R100 bolted to a stock 7.3 turbo dee-sill with a good rear main sill.
@airplanyguy68
Жыл бұрын
Just guessing you've done this once or twice. Wow, what experience you must have.
@joepeanut6827
Жыл бұрын
OH Man Is this real are you guys back? Glory to God. Iv missed you guys so much so glad to see you are still doing well. hope to pick up where we left off.💟Missed you guy's so much. Is that the durty bird in the back ground sporting an all black paint job? your shop look's different.
@rheidtech
Жыл бұрын
Subbed brother. Love ya. Thank you! #americafirstisimminent 🇺🇸
@pbee73
Жыл бұрын
Wow, glad you are back Richard and was always wanting to see you do a vid with a manual transmission.
@floodway2955
Жыл бұрын
You're back. Nice.
@redruuum75
Жыл бұрын
Welcome back! We've all been waiting. Instant subscribe.
@richardteresacricheducatio3542
Жыл бұрын
We are excited that you found us we are excited to be back
@orlandomarcano9822
Жыл бұрын
First time watching. Was the wear on the bearing surface on 5th gear and shaft from mileage or had it been flat towed? I have done a few 4500s and enjoyed watch the tear down, fixing to do my bosses 4500. Got a few tips watching, Thanks!
@franksprecisionguesswork501
Жыл бұрын
Welcome back! Welcome back! Welcome back! I’m very glad to see you here!
@richardteresacricheducatio3542
Жыл бұрын
Thank you very much we’re excited to be back thank you for your support
@White.Elemant
Жыл бұрын
Whoa, R & T are back 👏👏👏
@nickcucchiara
Жыл бұрын
It's good to see you again as it's been a while! Just found this channel and happy to subscribe as you do excellent work!
@dalleymonroe3836
Жыл бұрын
It’s nice to see you back. I’ve been waiting for a dodge nv4500 to come through your shop because I got one that’s stuck in fourth gear. I’ve wanted to see what I was into before I got into it from what you was saying it looks like I’ll be sending mine out to get fixed.
@audikid89
Жыл бұрын
So glad this video popped up in my feed subscribed
@roarkfabworks
Жыл бұрын
Love learning new things from you Richard. Very happy to see your videos again. Keep up the great work.
@chrismclean712
Жыл бұрын
Glad you are back!
@ericfaley9019
Жыл бұрын
I’ve did lots of those 5th gear nuts and gears under warranty at the Dodge dealership . The local transmission shops in the area used to weld the nut to the shaft. Bad idea if you had to service the internal parts. Good to see you back online.
@stevendiemer2833
Жыл бұрын
Glad to see your bad is there anyway to get ahold of you i talked to you about a tranny i was building and i have a question or two
@heatherfawkes4759
Жыл бұрын
Welcome back missed your great videos.
@aarondavis7390
Жыл бұрын
Glad your back!
@gbowne1
Жыл бұрын
Really glad to see you back. Best wishes for you both Richard & Teresa :) Always enjoyed your videos.
Пікірлер: 331