Diction apologize for my writing, I do not even speak English, I write the following message by google translator. Excellent your explanation; encourages me to continue.
@chrisgooi
5 жыл бұрын
All the best good luck
@69elchupacabra69
4 жыл бұрын
lol that disclaimer was longer than the actual message
@bruceeggleston6073
5 жыл бұрын
Steve, I've been a hobbyist Woodworking for about 40 years. I was never really did anything that was very complicated at all. Mostly refinishing antiques. When i was 20 years old, I bought a Solid walnut Waved drawer front with a hand beveled mirror and wooden casters and get this, i paid $5.00. I refinished it and was hooked. I want to tell you that I've learned so much from you. Of all of the thousands of people that make woodworking videos, I love yours more than anyone else I've seen. You have an awesome sense of humor and make it so much fun to watch while learning very important techniques and safety tips. Thank you so much for your videos.
@kathyrosier5585
5 жыл бұрын
Lol, "workshops that are the size of aircraft hangars." So true! Thank you so much for catering to us mere mortals!!
@bs838
5 жыл бұрын
So true. And they're usually the ones trying to act like what they made is so simple and accessible, that anyone should be able to do it! No names, but you know who you are. They're probably too good to be subscribed to Steve Ramsey anyway...
@craigbainum4967
5 жыл бұрын
Notgonnalie--if I could have a shop the size of a aircraft hanger, I would. I am a power tool freak. 'course right now I would settle for more power in my garage, so I don't blow fuses when I have too much going on.
@pabloata4708
5 жыл бұрын
@@bs838 April Wilkerson...
@niwty
5 жыл бұрын
Pablo Ata so true. All that space to make pocket holes and French cleats in! 🤪
@hwood9783
5 жыл бұрын
@@craigbainum4967 How many power tools can you use simaltaneously.
@timothyfahlen2736
5 жыл бұрын
Hey Steve, I want to send a quick thanks. I just built a king size bed frame out of African mahogany and your videos were my primary teacher. Your pocket hole video, gluing and sanding vids, and general tips sprinkled throughout all your projects have been invaluable. Thank you SO much!!
@InfiniteCraftsman
5 жыл бұрын
YOURE an essential power tool...🤣 no really, you’re essential to this community. Thanks!
@arbitrarystuff1229
5 жыл бұрын
you also called him a tool
@spoderman15
5 жыл бұрын
@@arbitrarystuff1229 but an _essential_ tool ;)
@InfiniteCraftsman
5 жыл бұрын
Spoder Man gets it😜
@mordechaihellinger6352
4 жыл бұрын
I couldn't agree more!
@frankchen4229
4 жыл бұрын
@@spoderman15 an essential POWER tool
@RoomFourError
5 жыл бұрын
Thank God my wife didn't watch this video with me. It would have killed my excuses for more tools. Thanks Steve, it was a useful video.
@jamesanthony8438
5 жыл бұрын
Quick! Delete it from your internet history, too! =)
@RoomFourError
5 жыл бұрын
@@jamesanthony8438 👍
@Scorakos7
5 жыл бұрын
the hardwear store is a toy store for men /fact !
@syafaz9805
5 жыл бұрын
LMAO!
@iltoni6895
5 жыл бұрын
Does your wife control how you use YOUR money? What a pathetic existence
@robertjones2138
5 жыл бұрын
Used tools, used tools and used tools. Steve’s suggestion is on the mark. If you’re not in a rush estate sales and auctions are a great source.
@1pcfred
5 жыл бұрын
Used tools can be a bargain if you know what you're looking for, or at. Unfortunately that is not the position beginners find themselves in.
@nomifrog
4 жыл бұрын
Just discovered this channel in 2020, ive always been interested in woodwork but always felt it was an expensive hobby! Thanks for making these sorts of videos filled with great advice!
@billiondollardan
5 жыл бұрын
I've been watching videos like this for about 7 years. I think I might be ready to start woodworking lol
@matthewb3853
4 жыл бұрын
Don't fall into that trap. That's what my friend did and he doesn't have enough time to watch youtube videos about woodworking anymore :( haha
@fatimaqassim4490
4 жыл бұрын
What are you waiting for!
@asimjill2206
4 жыл бұрын
Lol
@simonbaker6233
4 жыл бұрын
I just started. Really loving it
@sandramatos6409
4 жыл бұрын
billiondollardan Check out Ana White’s videos.
@mikelknight799
2 жыл бұрын
Whole heartily agree with your list. You really don't need a bunch of fancy high end tools. On a budget you might throw in a Radial Arm saw you can get those really cheap on Market place. They usually are under a $100 bucks for a good older lightly used one. My Dad built an entire kitchen cabinet set with a Radial Arm saw over 50 years ago. You can even get shaper heads. They seam to have come out of fashion like dado blades. LOL I used one for 40 years before buying a cheap chop saw for easy portability on job site when building my house. Thanks love your vids.
@mofared
5 жыл бұрын
miter saw 1:55 Circular saw 2:40 Jigsaw 3:11 Table saw 4:06 Drill and Driver 5:14 Random orbit sander 6:04
@felliesweetie
4 жыл бұрын
I am terrified of table saws!!
@frostsmaker8966
4 жыл бұрын
@@felliesweetie yeah, it is dangerous. it is good but dangerous. when I do woodworking, I could make a mistake or two. I'm human and there will be a time where I make a mistake. That's why I won't use table saws. I want some other tools which are friendly to use.
@alwaysplaythegame
3 жыл бұрын
You can either pony up big time for a saw stop model or get a cheap track saw. Technically a circular saw plus guide works the same as a track saw but consider that a track saw setup is about 2x setup time as table saw, and circular saw is about 3x setup time.
@bretwhitten7038
Жыл бұрын
@@alwaysplaythegame i’m not getting a table saw until i can afford a sawstop, it’s simply not worth the risk for me
@artguti1551
4 жыл бұрын
I have them all...but for a homeowner with back yard projects...I also have a wet tile saw for paver work, Ryobi cement mixer for cement or mixing mulch, topsoil/sand etc. Hammer drill for drilling into cement or brick work, Mikita right angle grinder, Air Compressor with Nail guns, Sawall for deeper cuts and, and, and a small mig welder for fencing and art work.
@diego898
5 жыл бұрын
Hey Steve - I'm in your beginner's woodworking class, and have bought these tools (specifically the ones you recommended in your PDF). Myself and others have noted that the Ryobi miter saw and circular saw do *not* come properly calibrated out of the box! Could you please make a video explaining how to get them reasonably calibrated? Thanks!
@artguti1551
4 жыл бұрын
If you are doing exact cutting...read your manual for calibration. If you are doing out door work...then it shouldn't be a problem.
@curiouslucious
4 жыл бұрын
So glad I found this channel. My "workshop" is literally 2 saw horses and a jigsaw and a newly acquired RO sander. I started out with making a mold for a concrete project but now I'm interested in woodworking. Gotta find a better way to cut big pieces of wood! Thanks for all your info!!
@adamlaski9128
5 жыл бұрын
People love to crap on Ryobi but you know what? They were the first battery powered tools I bought years ago and every one still works. They’re not the most precise, powerful, or pretty but they do the job for a fraction of a cost the big boys will run you. And as a working carpenter, I still pick them up from time to time. Most recently a belt & disc sander that was cheaper than filling my truck up
@Zombiereaper1
5 жыл бұрын
I have a Ryobi corded drill I bought like 7 years ago, I've beat the crap out of it, and it's still kicking.
@thecluckingassassin
5 жыл бұрын
Ive had my ryobi disc sander for about 12 years and still going.
@nathanjxaxson
5 жыл бұрын
I would say the same thing about my green Worx cordless drill & driver. They aren't ever going to rival Bosch or Makita - but they were 2/3 the price and are still trucking after years of heavy use against heavy solid oak. Some times you aren't settling for "good enough" - many affordable tools are actually "great enough."
@1pcfred
5 жыл бұрын
I have a couple Ryobi tools. They suck. They're not cordless though. I wouldn't even say they do the job either. But they're the older blue line they used to make. I think Ryobi may have improved some? Still, with the experience I've had with their crap I'll never know.
@jimbo2629
5 жыл бұрын
The latest Ryobi one + tools are the bees knees.
@PilatomahawK
4 жыл бұрын
sometimes I think about the woodworkers of the XVIII century and before industrial era. They oughted to be so precise, full of stamina and disciplinated, and with just very simple tools they got the work done and made truly art furniture. Very good advise for a southamerican woodworker, where powertools are even more expensive than in US or EU
@relentlesschaos95
4 жыл бұрын
The expert circle: Dave Ramsey: Finance Gordon Ramsey: cooking Steve Ramsey: Woodworking
@synovia421
4 жыл бұрын
relentlesschaos95 I noticed that also lol
@hameedullahjasat2560
4 жыл бұрын
Are they related
@SnipSnapDragon24
4 жыл бұрын
Those skillful Ramsey boys.
@allwoundup3574
4 жыл бұрын
ah yes, Dave Ramsey, the financial genius who filed for bankruptcy because he was a million dollars in debt. "Buy my book to learn how to save money!"
@katgum
4 жыл бұрын
@@allwoundup3574 If I'm correct, that was about 30 years ago, and he made his millions years later. Unless there's another bankruptcy I don't know about. Which if there is, when was it?
@ericdowell818
4 жыл бұрын
Thanks for your videos. I haven`t done wood working since high school many years ago. My wife and I are going to set up a shop in half of our garage. I just stumbled on your videos today and we will be using your videos to get set up and get going.
@SuperDavidBrothers
5 жыл бұрын
Wow this was really helpful Steve, thanks for letting me know. I thought a Table Saw was super duper expensive all because of how massive it is!! 🤯🤯
@ButBigger42
3 жыл бұрын
Impact driver is the best tool I've ever bought. I use it for everything. I got the dewalt brushless 1/4 impact about 6 years ago. I have dropped it hundreds of times. Gotten various automotive fluids on it. Used it for construction and auto repair as well as woodworking. It has been flawless.
@TheNotedAnatomist
4 жыл бұрын
Thanks so much ... this was very helpful
@PMichaels
5 жыл бұрын
Steve, your channel is proof that almost anyone can get started in woodworking and make cool, useful stuff. I love how you take the mystery and fear out of woodworking. Kudos to you, sir! 👍🏼
@oslogutt80
5 жыл бұрын
Great content as always Steve!! Greetings from Norway
@wayneyadams
2 жыл бұрын
Over 40 years ago I built a set of bookshelves using a circular saw, router, and sander. They are still in use today in my home office. Today I have a table saw, compound miter saw, small router table with removable router, jig saw, random orbital sander, drill, and impact driver. I'm probably going to get the Kreg pocket hole kit. I also bought an economical band saw, and drill press, which are still in their boxes. :-) They were impulse buys because they were marked way down to crazy low prices, but to be honest, I have never needed them. I use the miter saw, table saw, jig saw, and router for almost everything I build.
@bradisscrat6037
5 жыл бұрын
I love the index! :)
@SteveRamsey
5 жыл бұрын
Thanks!
@chanman201
4 жыл бұрын
Thanks. Best video I've seen for beginner woodworkers.
@jcsrst
5 жыл бұрын
Good advice. Best to start cheap if you're not sure you want to pursue the hobby. I have a combo of "good", "expensive" tools and "cheap" ones. I don't buy a tool if I don't need it. When I do buy one I carefully consider, why, what for and how much. Sometimes a cheap tool does it, or sometimes you can make your own. I only buy expensive tools when there isn't another option to get the job done. It's all about efficiency. It is refreshing to not be seeing someones huge shop with the most expensive tools. I think it's important to mention that a 100K shop doesn't make you a better wood worker, one thing it does say for sure is that you've got a lot of money. Thanks for sharing! Your videos are very helpful!
@1pcfred
5 жыл бұрын
I buy tools I don't need. I buy expensive tools too. I try to get them cheap though.
@mr.b.w.3146
5 жыл бұрын
I have my shop in my garage and have table saw, router table etc., all on trolleys made with boards and strong caster wheels so I can drag then out when needed. I haven't got an aircraft hanger so this system works well for me. Thanx for your videos, they are well worth the watch.
@NJEsperantist
5 жыл бұрын
Steve Ramsey: making woodworking accessible since 2008!
@SteveRamsey
5 жыл бұрын
Hey Dave! Thanks.
@tuckera1879
5 жыл бұрын
I have some vid ideas for you, I am a 12yo woodworker and a run a medium sized business, your videos and my mentor really helped me to get into woodworking. I don't know if you already have a video on clamps and vises yet but I figured I would chime in some if my ideas, also a table saw safety video. Thanks from Minnesota!
@ayoyyoy
5 жыл бұрын
Wow! 12, with a medium sized business. Good stuff. You should make some videos on your channel showing how you have built it up and what yoou do. Have you got a website for your business? I'm keen to see it!
@tuckera1879
5 жыл бұрын
@@ayoyyoy my mum won't let me make videos and I don't want to either as I can barely run a phone much less a camera, but that is ok as I document all my projects and things on a Facebook page my mum runs. It is Anderson Woodworx on Facebook (make sure you spell it with an X not a ks, it gets a lot of people)
@ichor20
Жыл бұрын
3yrs later i have all these tools except the table saw. All thanks to this video, I've made numerous pieces of furniture for my wife, kids and relatives
@mralabbad7
3 жыл бұрын
I got the Neanderthal package. A No.4 plane, a few chisels, a mallet, a fine tooth handsaw, a steel ruler, a square and a few clamps. It all cost me about 100$! I just finished my first piece, a 4 legged stool. I literally made in my bedroom on the floor because i don't have a workbench yet😂 It was hard and it took me quite a while, but for a beginner it looks great! Most of all it was satisfying to know you can still do it all without buying a bunch of machines and supplement them with time and extra elbow grease. Of course I'm doing this as a hobby so this is very sufficient for me!
@nicholasbolin9862
5 жыл бұрын
Hey Steve, checked your videos out because im planning to make a workbench for other non wood working projects. But i kinda got wrapped up watching a ton of your videos, and now i have ideas for several projects. I think you just got me into woodworking. Thanks for the videos!
@mikeandlucky
5 жыл бұрын
Thanks as always for looking out for us folks who love woodworking but have to do it within our family budget :)
@ximono
5 жыл бұрын
I'm a European amateur woodworker and unlike my American brethren I don't own a table saw, and I don't plan to buy one either. Not because I'm European and therefore have to do everything differently, but for a couple of reasons. First, I don't have enough space in my narrow shop (more like a bike shed than an aircraft hangar). Second, I find them scary as f... and feel much much safer using this trio: track saw, miter saw and router. Those three tools can do most things (anything?) a table saw can and more, and they take up a lot less floor space. I do see the appeal of the table saw's versatility, but I'm perfectly fine with my setup and the fact that the saw blade points away from me. When the time comes that I need more versatility and a larger shop, I will hopefully be able to afford one of those Felder/Hammer beasts that make table saws look cute. Well, that's the dream anyway. Thanks for your inspiring attitude to woodworking, and for another good video! I always learn something new.
@philquinn73
5 жыл бұрын
European, get to know Paul Seller's
@ximono
5 жыл бұрын
Philip Quinn: Oh yes, Paul Sellers was one of the first woodworkers I watched on KZitem. Looking back, I think he's the one who inspired me to pick up woodworking in the first place. I hope to do more "fine" woodworking with hand tools eventually, I really admire true craftsmen/artists like Sellers.
@IraRadchuk
5 жыл бұрын
100% agree, for me router is essential and tablesaw is not at all (and is terribly scary even though I took a three-day course on using it). Fellow europian here tough, might be the reason, indeed :))
@rbij
5 жыл бұрын
No space for a table saw here either. I work on a 2.5x1.2 balcony... I use a circular saw and guide rail instead. Just takes more time to set up.
@ximono
5 жыл бұрын
Roy Bijster You're right, setup takes longer with a track saw or router. I have to admit I'm a bit jealous of those who can just walk over to their table saw, adjust the blade and fence and start ripping. There's always a tradeoff.
@KipdoesStuff
5 жыл бұрын
I rarely agree with these type of videos but I have to agree, this is pretty much dead on.
@hectorcastillo1792
4 жыл бұрын
Imagine him telling you "Good job, champ" after he sees your finished project
@CraigularjJoeWoodworks
2 жыл бұрын
I hope Steve gets paid lots by KZitem. He deserves it.
@shusiman
4 жыл бұрын
Very inspiring and professional speech. Thanks! 👍
@dextervenske57
3 жыл бұрын
I really enjoyed this video, I'm busy building my humble little shop now and this was very inspiring. Thank you.
@MS-ho9wq
4 жыл бұрын
OMG yes! I got by with a drill alone for handyman stuff for like 5 years (because I am cheap) before I finally caved and bought an impact driver. Drill for guide holes, impact to send the screws home. Gets jobs done in less than half the time, no more messing around changing bits. Can use the impact with a socket adapter to work on the car as well. I honestly wish I had bought the impact years ago. Totally worth the money. It's good to save money, but being a cheap bastard is no fun.
@abayomidiamond2395
2 жыл бұрын
I love the way you explain it thank you sir, very helpful. I want to lean more
@NotActorRobertLoggia
3 жыл бұрын
I'm currently looking for searching second hand markets and big box stores for good deals on beginner level power tools. Tips videos like this go a long way towards helping me pick the right tools.
@Ynoz2744
5 жыл бұрын
Just wanted to say, thanks, because of your channel, I took up woodworking a while ago and I am hooked! thanks so much!
@stathisbikos6563
5 жыл бұрын
5:44 That is incorrect. Impact drivers are not hammer drills. They do not have any axial action, hammering or otherwise. What impacts do is deliver torsional hammering blows by accelerating a mass in a rotational motion with the motor and then suddenly engaging it on the "anvil", which it the part that accepts the bit, so that it hammers it in the same rotational fashion. Thus the inertia of the rotating mass translates into torque on the bolt. This is done so that the driver can deliver torque to the bolt without the user having to apply that torque to the tool to keep it from spinning. Otherwise, if you attempted to use a 140nm non-impact driver it would just twist your arm (this is why non-impact drivers never exceed the low 40nm range. There would be absolutely no point for the to go any higher). Another reason for the impact action that doesn't really apply to woodworking is that due to the fact that impacts deliver fast blows to the anvil, the tool can tighten bolts onto parts that are not restricted from moving (for example a lug not on a wheel that in not held by a brake/the ground) by using the part's inertia to provide enough "holding force" for lack if a better term. This off course works better the heavier the part is. Love your channel. Keep it up :)
@briancarter1597
5 жыл бұрын
That's what he said. He just said it differently than you.
@stathisbikos6563
5 жыл бұрын
@@briancarter1597 i take "tapping in the same direction you drive the screw in" to mean axially, thus the correction. If indeed this is not what he meant then the comment still serves as clarification at least. :)
@arpie2081
5 жыл бұрын
There are a few drill drivers on the market these days which can exceed 40Nm by quite a bit I believe
@briancarter1597
5 жыл бұрын
@@stathisbikos6563 Um, no. He didn't say impact drivers are hammer drills. He said it taps in the same direction it drives the screw in. Rotation implies an axis. Your correction is itself incorrect.
@stathisbikos6563
5 жыл бұрын
@@arpie2081 oops! That was a brainfart. Offcourse they do, even my Gsr 18-2 can reach about 60 in low gear I believe. I meant low 100Nm (notice I wrote 140 for the impact having in mind a specific einhell tool I have worked with, my brain grabbed the wrong end of the deduction, sorry about that) Even then I admit you could argue there are twin handle tools like the M18 fuel than go even higher, but to be fair, 1, these are not meant for bolting down without the clutch engaged and 2, these aren't really the tool you would use to drive in screws in woodworking and 3, these can and will twist your wrist if you are not carefull (if you are stupid enough to use them single handed and have the clutch in drill mode... (that has never happened to me, honest :P ) Fair point though and I did fudge the number there. sorry, and thanks for pointing it out! My point is in the end though, impacts make high torques easier and safer for the user and that is mainly the reason to have one. in my opinion. :)
@StreaminFreedom
4 жыл бұрын
Been watching your videos for a while, finally broke down sold the guitar and bought a skilsaw table saw. Looking forward to get started!
@Santosh-xy6tk
5 жыл бұрын
I am just watching all your videos and this one was very helpful for a novice like me, Thanks
@larrystrayer8336
5 жыл бұрын
Very well presented,, brief to the point ; good information I think That the miter saw is my favorite especially if one is constructing a project using 2 x4. Not having to square up a cut is priceless. Lol.
@christofix
5 жыл бұрын
In my workshop i have a few basic tools and i'm planning to make others, like a bandsaw for example, myself! I think it will be fun and saving money the same time!
@f.demascio1857
3 жыл бұрын
Glad to hear I have everything on this list. Now to find some time.
Finding a lot of benefit to a 7-1/4” miter saw, and a 4-1/2” circular saw. These two smaller tools are extremely useful. I am a general contractor that does primarily bathroom renovations. We work in our wood shop to build various cabinets, shelves etc, and these smaller tools get many tasks done.....in addition to our small impacts and oscillating saw 😁 One advantage to being a general contractor is that I have set up all of our trailers and shop with the same 20v Dewalt platform....so we have pretty much every tool in 20v, and we have a couple dozen batteries. That makes it nice because you never run out of batteries 😉
@elfpimp1
5 жыл бұрын
I lucked out on the Table Saw. Got a Craftsman belt driven one for free. Had been sitting outside for three years. Took me three hours to clean the rust of her. Now she gets cared for and used. Latest tool was a craftsman router with table for $10, just need to find a collet nut that will fit..
@takeshikovax6254
4 жыл бұрын
I'm pretty happy with 1) a table saw for medium to small size boards and sheet goods, 2) large hand saw for breaking down sheet goods and 8'+ boards, 3) plunge router for holes and circles (among many other things) 4) coping saw for curves, holes, etc 5) jack plane for flattening glue-ups or any situation where I need to just take a little off an edge 6) orbital sander for prep-work and finishing 7) belt sander for when I have to sand a lot down 8) Maslow CNC because it's cheap, cool, and fun, lol. For very fine work, I also sometimes use a tenon and dovetail saws, and chisels. Been thinking about getting a circular saw for the ease of breaking down sheet goods, or some kind of inexpensive tool that wouldn't take a lot of space for cutting sheet metal or plate steel; maybe a plasma cutter.
@leifprice8836
5 жыл бұрын
The tools mentioned are always handy to have in case of DIY jobs around the house. Very informative video, indeed.
@Assorted12
5 жыл бұрын
Love the channel. Always happy to see when you post a new video. As far as power tools go, I'd add a router to that list. They can do the job of nearly every tool on your list (not as well). A super versatile tool.
@johnnichols8553
3 жыл бұрын
I finally have all these tools in my arsenal, except for a decent jigsaw. But I do have a good scroll saw, and I can make curve cuts all day long on that. I finally feel like I can make decent things. The first thing I'm building now is a heavy duty workbench, with a woodworking vise.
@TheMadnessOfCrowds
5 жыл бұрын
Been following for ever, and you are still extremely inspiring. Thank you for years of entertaining and informative content.
@PacesIII
5 жыл бұрын
If you can make quality stuff with cheap tools, you'll appreciate expensive tools once you can afford them. And, you'll have more time to figure out what expensive tools you'll eventually need.
@wickeddubz
5 жыл бұрын
Steve, nice selection and tips, as always. Folks, raise your hands those who started their workshop in a small room, balcony or garage 3x6 m. Can you remember that day?
@Daz555Daz
3 жыл бұрын
I have no space for a table saw but I 100% agree with this list. I would add a detail sander to the list though - to get to the spots that your larger orbital can't reach.
@mikecurtin9831
5 жыл бұрын
All good tips, I especially appreciate the one about random orbital sanders. I've not played with them before, and this will be very helpful in the near future.
@varosolo78
5 жыл бұрын
Good to see you again
@buskirk50
2 жыл бұрын
one tool i would add on is a multi tool. can be used for so much with wood working and other projects around the house
@fernandochavez4312
5 жыл бұрын
Great video. I think your list is a good one. Having been in construction all my life I’ve noticed that trades people tend to buy good pricey stuff and us jacks of all tend to buy what we can afford or what might serve multiple uses. My personal experience, my 7 things you need are a hammer a tape measure a pencil one eye two fingers and a leg to stand on. Thanks.
@Umairworkshop
5 жыл бұрын
This is informative video for woodworking
@garyknight8616
5 жыл бұрын
Great video Steve. Common sense advice. Very grateful for getting me started in woodworking. Many thanks.
@mgeez6147
4 жыл бұрын
thanks for your advice -- I have a few tools all ready just not a place to put them --- the one thing is that I have a cheap table saw without a dado blade set -- now I wish that I had one -- saw that you like the dewalt as an upgrade -- need to make rolling tables to hold my equipment and make them more accessible -- just bought a small planer and I love it -- so much better than the one that I used in my wood class -- it was a huge planer -- I did make a small workbench in class -- but I did not put wheels on it -- but I will -- don't have a place to cut 4 by 8 materials
@MRIMan
4 жыл бұрын
Just started this is overwhelming
@jonathanwalker2543
5 жыл бұрын
A great hand tool to get is a sanding block that accepts the hook & loop sanding discs that you use with the random orbital sander. Steve, I believe you have one, and I finally got one from Amazon and it is great. Also, I totally agree with getting a corded sander vs battery powered one. In fact, I suggest doing the same for the jigsaw. I have a battery powered one and it runs through batteries.
@antonioruiz8506
5 жыл бұрын
Thanks you this makes the list a lot easier. I'm a beginner getting into woodworking and it's helpful have access to a channel like this
@SunflowerElk
2 жыл бұрын
I’m 11 and I have been wanting to try to woodwork and make awesome decorations for presents and for myself
@garynagle3093
5 жыл бұрын
Great video for us mortals. My 2 car garage has 2 cars. So space is a premium. Theses tools can easily be placed on shelves out of the way until needed
@christianalbert101
4 жыл бұрын
Thanks for your expertise Steve. New to the Channel, but I’m learning a lot and loving it!
@kstark321
4 жыл бұрын
OMG that table of contents in the first 12 seconds was awesome. I hate watching youtube videos that ramble 5 minutes for 30 seconds worth of content.
@DIYGene
5 жыл бұрын
This is a great video for getting the basics. Good job and keep up the great work.
@jamesanthony8438
5 жыл бұрын
I use the table saw more than any other saw in my workshop, followed closely by my hack saw and Dremel (with cutting blades). I don't know why, but it's just quicker and easier for me to cut out areas on the necks of my cigarbox guitars using my grandfather's old table saw. I guess it's one of those "dance with the one what brung ya'" things. =)
@steviemarchantswoodshop3279
4 жыл бұрын
Hey, this is the ethos of my channel! Why spend so much money and take up all your space with unnecessary tools? This is a great video with pretty much all you'll need!
@settleinelpaso6272
5 жыл бұрын
Hi Steve, we have been watching your videos only a few months. Within these few months, we have become a great fan of your channel. Thank you for explaining these power tools. Your videos really help us in purchasing and hence investing in tools. Your recommendations regarding tools have never failed new hobby woodworkers like us. We purchased our random orbit sander before we started watching your channel. Unfortunately, we purchased the battery-powered one. :-( As you said in this video, we feel that we need a corded sander even though we have three batteries. The batteries die faster than they can be charged. Thank you once again for making all the captivating and informative videos. Have a wonderful weekend ahead.
@edwinvasquezp
5 жыл бұрын
Just missing the orbital sander 👍🏼 I got everything and a little bit more, thanks for the video.
@syedjavedahmad9719
4 жыл бұрын
Thanks for tutorial Steve, 👍👍
@cs3225
5 жыл бұрын
Hey Steve. Thanks for the videos. Been watching a while and since then my shop and tools have become bigger and better. How about a video for guys that are willing to invest a bit more in tools. Thanks again.
@bakerfritz4681
3 жыл бұрын
I mean, the whole thing about his channel is that it’s for average people who have budgets.
@blazegeneration
3 жыл бұрын
4:34 makes my palms sweaty.
@craigpeel5995
5 жыл бұрын
Always so happy Steve. Good to see👍
@briancollins1149
3 жыл бұрын
Mystery Spot bumper sticker behind you, Steve. Santa Cruz!
@SinSpawn9000
5 жыл бұрын
Hey Steve, want to toss out for everyone that local public auctions are an amazing place to find tools for less expensive, a lot of places even have a place you can drag any power tool too make sure it still works before you bid on it, as long as you do that before the auctioneer gets to it. I have about 15-20 hand planes i got for under $100 total that just need some cleaning up and sharpening to get them in good working order.
@thomaskennedy3992
5 жыл бұрын
What’s up Steve I started watching nearly a month ago and I was looking for an easy cabinet to build for my wife some how I stumbled on to your channel and at first I thought you were lame but I’ve come to love you hah keep it up
@bakerfritz4681
3 жыл бұрын
That’s a backhanded compliment, which is a thing that is actually lame.
@thomaskennedy3992
3 жыл бұрын
@@bakerfritz4681 wrong he subverted my expectations but you're entitled to your opinions 🙍♀️ 🤷♀️
@chengliu872
5 жыл бұрын
Craigslist is great for good used tools. I got a Bosch table saw with a wheeled stand in good condition for $300 and a good Dewalt thickness planer for $200. Of course, with my luck both people lived in far remote locations.
@ayaazthaliph2108
3 жыл бұрын
Loved the explanations. thank you
@Cancun771
4 жыл бұрын
The main advantage of a sliding 12" mitre saw is the cutting depth. So it's a good thing to have if you habitually use lots of fairly thick pieces of lumber, like 5x5 beams.
@RonConsumer
5 жыл бұрын
Thanks, Steve... Always enjoy watching your videos... 👍👍👍👍👍
@demonshaz
5 жыл бұрын
Very beneficial info. You definitely need a THUMBS UP!
@ReferenceFidelityComponents
3 жыл бұрын
Some good advice but if I may, I'd add to the list with a 1/4 inch router as they're also incredbly useful around the workshop. One thing you missed which is essential is some form of dust extraction. The battery operated ones are useful for sanders and routers but a mains powered one with high airflow is realy needed with a bench saw.
@waveali5620
3 жыл бұрын
Good stuff. I guess I start stocking up on what I don't have already each payday.
@raynelson9066
5 жыл бұрын
Thanks for the great index & videos. Straight forward and simple advice.
@danielgalindo2714
5 жыл бұрын
Great video sir, I’ve been wanting to get my shop started as hobby but I would eventually would like to get in fine cabinet and furniture, I come from 3 generations of framers my dad it’s all about speed and efficiency and we fight a lot cause I like to get really tight perfect cuts and he gets mad or he cuts a rafter and I throw it back cause it dont fit perfectly 😂 I been doing trim work lately and I’m loving it
@limjunekiat
4 жыл бұрын
Thanks for this list, Steve. It's superb!
@robertgullickson8758
4 жыл бұрын
Excellent recommendations!
@rdesign1557
5 жыл бұрын
Great video. Im just beginning to entertain the idea of doing some woodworking. Very helpful
Пікірлер: 1 М.