Hey do you know if this gearbox is in my 2008 Golf V? I can't find anything about the exact model number but it is a dry 7 speed dsg
@adrianstroila
2 жыл бұрын
I did it to a 65k miles dsg 7 1.6 tdi and the "clacking" noises are gone or much reduced between 2'nd and 3'rd gears on bellow 1700-1800 RPM
@djakkarl7586
2 жыл бұрын
Merci thanks you Nice video
@user-uq4qp8nm6i
11 ай бұрын
Wc setting do i need after changing gear box
@fnankter2091
3 жыл бұрын
Nice think you
@Noro333
4 ай бұрын
Perfect
@wackey3455
26 күн бұрын
Hi do you have a save scan of your car my car is the same as yours if you have would you post a scan code of the car I’m having some problems with mine thanks 🙏
@user-rj9pi6vz1w
5 жыл бұрын
Hello sir dear thank you for the movie I have borrowed which model of vehicle you are dealing with and whether the vcds software is 18.9.1 up to date and new models and can you set the box through it until model 2018 ?? I'm from Qua to answer my question
@vyomsinroja1208
2 жыл бұрын
After the 400 step the last 254 0 0 isn't working
@maws7766
2 жыл бұрын
Doing this procedure, but after getting 400 and starting the car it goes straight to 500, anyone got any idea what this might indicate ? (I had a error showing 5'th gear not selectable, but seem to have been able to clear that, but still got 500)
@exhaust10
3 ай бұрын
Hi, if 255 | 0 | 0 is showed, it would indicate the basic settings was interrupted or failed.
@psgamer3741
3 жыл бұрын
Auto padre how much will vw charge me for this job
@at0ny
4 жыл бұрын
Thats not all. You also need test drive after this. Tripstronic gear 3 or 4 2000/4500 rpm max for about 10 min. After this reverse, and them normal drive in D, and let the car shift all gears.
@caffecentralsmith1954
3 жыл бұрын
Do you have a road to perform test drive? I don't.
@at0ny
3 жыл бұрын
@@caffecentralsmith1954 public road 🤷♂️ or do you live in the Middle of no where?
@caffecentralsmith1954
3 жыл бұрын
@@at0ny under the stone :D
@kashifjamal1719
2 жыл бұрын
Hi Atony! How much time need to drive in reverse ? My car is working well only when I start it and shift from parking to drive or reverse it not respond I have to push brake padel 3 to 4 time then it respond and start moving. Do you think it need basic setting or it have some other issue. Thanks
@juanRamirez-pk1cd
3 жыл бұрын
Si esplicara estaria bien pero parese antro
@itumelengmahaole5890
Жыл бұрын
Do you have to do this after replacing your clutch and flywheel? The mechanic says after replacing the Clutch and flywheel the vehicle still says "clutch tolerance limit reached". Kindly advise.
@PedroGonzalez-yr6xd
Жыл бұрын
Hello friend whenever the Clutch is replaced you have to make a básic Setting.
@as1fh
6 ай бұрын
Hi, I have replaced the mechatronic unit on my car and performed basic settings however there are sometimes issues with engaging gears 2-3. Do i need to run one of the other options e.g IDE 12710-Initialization of clutch friction coefficient model after mechatronics exchange?
@thotpolice642
5 ай бұрын
Bleeding hydraulic clutch
@reviziecutiebuftea
4 жыл бұрын
The procedure is incomplete. You need to do test drive with specfic steps.
@Juzu841
3 жыл бұрын
From Ross-tech wiki: NOTE: If the test drive cannot be performed in the recommended way or the necessary time, any remaining adaptations will be performed automatically during normal driving.
Пікірлер: 24