Put the top case upside down. Use wooden blocks to raise it off the table so the rods can hang free. Place the crank into top case. Spread the sealant onto the bottom case. No studs to work around this way. Torque the bolts in stages 12 - 16 then 20 ft/ lbs twice
@mykelgreene911
4 жыл бұрын
My 98 and 99 xc 700s are running great i love these sleds!
@SwampDonkey530
4 жыл бұрын
Thanks I appreciated seeing that..can't wait to see her come alive!!
@thmike
4 жыл бұрын
Make the switch to ultra gray and never look back! Ultra gray = yamabond..black rtv doesn't do great with gasoline!
@dakotabeck4971
4 жыл бұрын
Nothing wrong with using what you got laying around, nicely done 👍
@MidnightPolaris800
4 жыл бұрын
Awesome video. Ive used used pistons several times on polaris sleds and they are fine. In fact one time i put a std 440 fuji piston used in 1 side of my 96 xcr 440 sp. They were even a few grams difference but i didnt give a crap and put em in anyway and ran it another several hundred miles before i sold it
@happyindeed6392
4 жыл бұрын
Loctite 515 or permatex moto seal to seal a crankcase, never heard of using rtv.
@Clevelandflexin
4 жыл бұрын
I’m doin mine during quarantine
@thatmodshop7160
3 жыл бұрын
Re quarantined I'm building a dragon mod with one of these motors in it
@user-yu5lv6fh9f
3 жыл бұрын
Красавчик 👍👍, я тоже в марте перебрал SKS 700 2001, я из USSR, у нас с запчастями проблема!!!
@StreetersGarage
4 жыл бұрын
Awesome. Can’t wait to see it fired up. I think it’ll be fine.
@darrellroeters4951
Жыл бұрын
Like the budget build
@markworkman9224
4 жыл бұрын
Polaris motors are good though, I have almost 18,000 on my 03 edge crank. The crank has never been rebuilt or anything. All original. Top end of course has been done.
@chevyman273
4 жыл бұрын
Nice job. Can't wait to see it run.
@happyindeed6392
4 жыл бұрын
Would have to agree. used sled market is dormant right now. You could go spend a grand on that motor and never get it back.
@SpicyBloodBean
3 жыл бұрын
icky big block with the belt driven oil pumps always made me nervous. never had a problem with my small blocks
@markworkman9224
4 жыл бұрын
Black rtv isn’t gas resistant
@AKproXR
4 жыл бұрын
Mark Workman this is true, however I have used it more times then I can count and have never had it leak.
@markworkman9224
4 жыл бұрын
AKproXR exactly, I use it on alot of stuff too, and haven’t had leaks. I just prefer yamabond for case halfs.
@AKproXR
4 жыл бұрын
Mark Workman absolutely. Yamabond is a proven, top quality sealant for cases. I won’t argue on that!
@stonefingers111
3 жыл бұрын
Great vid, I just rebuilt the top end of my xc700 also. The base gaskets in my kit were paper and I've had coolant being ingested in to the mag cylinder now. I notice your gaskets are metal and wonder what you think of the paper ones. I did use reman jugs but I doubt they are the problem but never say never.
@CampingDad247
4 жыл бұрын
i just found your channel and your videos are pretty damn awesome! ..subbed fosho!
@docwatt8881
3 жыл бұрын
Bro you need to bang a work table together that little rolling cart is scary
@nateruh3698
4 жыл бұрын
I always put the y Pipe on before I torque the jugs down great video let er rip
@timryerson6733
3 жыл бұрын
honda bond ,yamabond is the same as 3bond 1184 which is the best case sealant in the world oil and gas have no effect on it at all unlike rtv which swells up squishes out and blocks passages and oil galleries
@AKproXR
3 жыл бұрын
No oil passages on the mating surfaces, and if you manage to get it anywhere near an oil Hole anywhere on the engine you are using way to much. I usually use yamabond as there’s a Yamaha dealer close to me, but I like trying different things. This specific engine is still running flawless to this day.
@lonniemartin1084
4 жыл бұрын
Yamabond thats what you were thinking of
@AKproXR
4 жыл бұрын
lonnie martin that’s the one, yep.
@scottmeyer3803
4 жыл бұрын
getting a sled tomorrow and i gotta swap the track on it
@jessegrimm9274
4 жыл бұрын
You did great for working on that wobbling table. I was waiting for that motor to hit the floor. Good content. Cant wat to see it running. Did you do a ring gap check?
@AKproXR
4 жыл бұрын
Jesse Grimm lol @ the waiting for it to fall. And no I did not, the only time I will check the ring gap is with new rings.
@rmtm7460
3 жыл бұрын
Have you ever tried a scotchbrite pad on a die grinder for cleaning gasket surfaces? AKA surface conditioning disc.
@sethmonson1205
4 жыл бұрын
There is a proxr on market place.
@canadaplace2be176
4 жыл бұрын
Ya bro they 3000. For xcxp Edge 700/600/800
@stillsteamin6550
4 жыл бұрын
Since you seems to be the resident liberty 700 expert, do you know if 98-99 bottom end is the same as say a 2003? Great videos keep them coming!! I've watched your rebuild videos multiple times to help me through my 2003 700 pro x rebuild. Thanks!
@canadaplace2be176
4 жыл бұрын
Nice jugs. Lol good job Alaska. Freezing 40 below 50
@chadoakes8002
4 жыл бұрын
Nothing wrong with using parts that are laying around I do it all the time if they're in good shape why you spend more money if you don't need to
@fairbanksairriders
4 жыл бұрын
So that’s how the magic happens!
@AKproXR
4 жыл бұрын
Absolutely!
@AndrewDaig
4 жыл бұрын
You going to do clutching to it? or just keepin er stock? But I think she'll rip. Looking forward to the next video. Cheers!
@canadaplace2be176
4 жыл бұрын
Ya good job!
@BiffTannenn
3 жыл бұрын
Do you have a link where i can order some spare parts for my polaris 700 hurricane jetski?
@raleighpeterson1302
4 жыл бұрын
I am planning on rebuilding my 2013 rmk 800. I have never done a rebuild before. Will it be similar to this engine or should I find a different video? There isn’t very many for my sled on you tube. Also if anyone has any tips or tricks I would be happy to know more before I start. Thanks!
@brianschadewald1212
3 жыл бұрын
How do you change the fuel pick up line on an edge chassis???
@aspenyukon6845
4 жыл бұрын
10ft lbs then 15ft lbs then 22ft lbs.....you went straight to final torque on first bolt....
@AKproXR
4 жыл бұрын
aspen yukon I absolutely did. As per the service manual this is not a requirement. That is just something people say you “need” to do. I can type what the service manual says to do... if you’d like...
@collinpatterson2164
4 жыл бұрын
I hope you put the exhaust manifold on the jugs before you torqued them down or you will have a bad exhaust leak. Like you videos keep it up.
@AKproXR
4 жыл бұрын
Collin Patterson no, and they won’t leak.
@canadaplace2be176
4 жыл бұрын
If i buy a xc 600 99 blown motor. On of those red power something. But wants a 1000. That alone just for sled? And blow motor eh.
@joedudley386
4 жыл бұрын
IMO If its not in mint shape, it's not worth 1000$ blown up
@canadaplace2be176
4 жыл бұрын
@@joedudley386 ya it looks good. Seat even. Ill some how show u
@canadaplace2be176
4 жыл бұрын
@@joedudley386 well going hire u lol. U right there is no orange Polaris like u pick up
@itsrebirth312
4 жыл бұрын
Hey there I got a question about my 89 Indy 500 it’s about my speedometer it won’t tell my speed I’ve tried all the things that I know to check like the little drive under the secondary clutch if that little key is broken and also the cable to see if it’s broken. I don’t know much about wires but the wiring harnesses looks to be fine, sorry if you don’t know what I mean not the best at typing things I’m talking about thanks
@AKproXR
4 жыл бұрын
ItsRebirth the speedo itself is strictly driven off the drive shaft. If the key is good, cable is good... I’d suspect a faulty speedometer.
@itsrebirth312
4 жыл бұрын
AKproXR ok, thanks appreciate it
@Xstreamaudio
3 жыл бұрын
Yamabond
@stephanebisaillon1915
3 жыл бұрын
????
@jimmaltese1852
4 жыл бұрын
Dude, u need a work bench!! Really...
@AKproXR
4 жыл бұрын
James Maltese I like my little spinning table for engine work, lol!
Пікірлер: 63