Hi. Could you please, if convenient, do a step by step tutorial of how to create a curved model structure.
@kylesinko
4 жыл бұрын
Hey The Don. I'll look into it! Thanks for the suggestion :.)
@299meena
3 жыл бұрын
This was a great set of hacks! I too, don't really like model making :/ Also, I see SKZ, I subscribe :)
@kylesinko
3 жыл бұрын
Hahaha awesome! Glad you liked it Yasmeen.
@rgapoorva3070
2 жыл бұрын
That's amazing sir 😊
@kylesinko
2 жыл бұрын
Glad you enjoyed it!
@cambamaqueta6178
2 жыл бұрын
wow....h3ro!
@carmelaao
3 жыл бұрын
1:57 how did stray kids end up here-
@MaYa-wl7pp
3 жыл бұрын
ohhhh I see *SKZ*
@randyrice1429
3 жыл бұрын
Speaking of using things around the house, I recently used a small round battery as a bathroom mirror. Loved it!
@kylesinko
3 жыл бұрын
Bloody genius!
@dr00lface56
2 жыл бұрын
yes my dog is very picky about architectur
@systemtim
6 ай бұрын
you should never use a flat straight edge (steel rule) for cutting. If you slip…….
@markschroeder5559
3 ай бұрын
Hack #1- Do not try to make a how to video so you can concentrate solely on your work and meet your deadlines. 😂
@MariaCollsNz
2 жыл бұрын
I think he's a great teacher. This persona doesn't always come across convincing so it doesn't seem sincere. I'm finding it was mainly at the beginning, say 1/5 of the video. Why say this when its either not going to be read or just disregarded? Because ultimately its a great video it would be great to see your following increase.
@kylesinko
2 жыл бұрын
Thank you very much Maria!
@archistudies7055
3 жыл бұрын
Very clean I like it
@kylesinko
3 жыл бұрын
Thanks!
@rr7firefly
2 жыл бұрын
I like to have some big books around to place atop glued pieces as they are drying. Books have different densities. The best ones are chunky, with hard covers. You can also place a perfectly flat piece of wood or metal between the books and the glued pieces.
@kylesinko
2 жыл бұрын
Great tip!
@nataliealkire5101
2 жыл бұрын
Hi!! Would you recommend a mini table saw? Why or why not? I'm a first time model maker and after some lonnnnng hours doing cuts with an exacto ( I think I went too extravagant with my building materials, they be thicc) I went ahead and purchased one . Wondering if I should be epecting any bumps in the road ahead with the new little tool. Thanks for sharing your knowledge!! I'm a new archi student and your channel has been helpful :)
@kylesinko
2 жыл бұрын
Hi Natalie! I've used a normal wood saw for a few projects where I had to get through 3-5mm MDF, no way I was going to use an xacto for that. I seriously think that with model making you should step outside the box and use whatever tools necessary. A mini table saw is a great tool to add to the collection. Depending on the material, you can sand it down after sawing to get a cleaner cut, as it might be a bit rough after. Thanks for the comment and best of luck with your project :)
@sukhpreetkaur8219
11 ай бұрын
Thank you 😇
@robertarguello1115
Жыл бұрын
By the way Kyle, using a hot-glue gun with their respective cartridges & cement-glue are two alternatives that will speed up your model making. 👍
@kylesinko
11 ай бұрын
Great tip! Cheers Robert
@phugoidoscillations
3 жыл бұрын
Nice video. For years I was using CA glue (super glue) all wrong. When combined with an accelerator, real magic happens...you can have enough time to position pieces and once the accelerator is applied it instantly sets, allowing you to move on in the build. I found that incorporating an accelerator transformed my process for model making, especially in balsa/basswood and styrene. I find a small one-piece bulb applicator makes it easy to apply the thin accelerator.
@kylesinko
3 жыл бұрын
I've never heard of accelerator before. Is that a paste you add to glue to make it dry quicker?
@phugoidoscillations
3 жыл бұрын
@@kylesinko It's a very thin low viscosity fluid that flows very well, it works its way into tight crannies and also can saturate local wood fibers. I usually apply it after the super glue and final adjustments, but if you're in some layup where you need an instant bond you can apply it to one surface first and glue to the second, upon contact the joint is done. This magic stuff cures the CA glue instantly.
@halah7991
Жыл бұрын
@@phugoidoscillations could you recommend a kind ?
@arianmorales1616
3 жыл бұрын
Hi ! What material do you use for your models?
@kylesinko
3 жыл бұрын
Hi Arian! It really changes for each model. Some basic materials would include foam, balsa, card, MDF and anything I can find really.
@nowrinsultana3047
3 жыл бұрын
prepare your glue is the life changing hack ,, :D love this
@kylesinko
3 жыл бұрын
Definitely a game changer. Thanks for watching!
@Hydermehdi
3 ай бұрын
Hello Kyle, thank you for such an amazing and informative video. You have the eye of an expert and the touch of a magician.
@Srewiee
4 ай бұрын
Bro just buy a mini hand grinder cutter
@Srewiee
4 ай бұрын
It's a machine with round blade rotating at 2000rpm
@romanshagiev9205
4 жыл бұрын
Helpful video, can't wait to try the hack about the glue :) well scripted and the editing is great!
@kylesinko
4 жыл бұрын
Thank you very much Roman! Always appreciate your comments
@abdallahsaad6212
2 жыл бұрын
Use a clear glue gun
@TheBlack4TeX
3 жыл бұрын
Not to be sceptical, but these aren't really hacks, just a few of the absolute basics of model making. Golden ones nonetheless! For the glue I'd suggest just using another type which dries faster (lots of the UHU-brand) and/or work in phases (draw pieces of phase 1, cut phase 1, prepare phase 1 with glue, draw and cut out phase 2 whilst 1 hardens, prepare phase 2 with glue and put phase 1 together, draw and cut out phase 3 whilst 2 hardens, prepare phase 3 with glue and put phase 2 together etc.)
@kylesinko
3 жыл бұрын
That's brilliant advice. Thanks for sharing!
@TheMjnorthcut
3 жыл бұрын
Nah, use model trees... they are professional seeing as professionals use them. Unless the rest of your model is abstract. A foam blob on a stick in embarassing
@Kj09433
3 жыл бұрын
Thank you so much !!! These hacks helped me a lot !!!
@kylesinko
3 жыл бұрын
Super glad to hear! Thank you for watching! :D
@ARKBlender
3 жыл бұрын
I thought this was blender
@artistpoet5253
2 жыл бұрын
letting pva set up a bit is something I haven't thought of yet should have. Many times in my painting process I let the acrylic paint set up a bit on the palette to exploit it's viscosity for texture. Also, while you still have access to the interior of a model, magnets are a great way to hold card in place while glue cures. Sometimes I'll use a bit of card covered in baking paper and a few magnets to hold down long/large pieces like trim rather than weighing or clamp and risk damaging work already done.
@kylesinko
2 жыл бұрын
Genius. Thanks for sharing!
@hakandemir9928
3 жыл бұрын
Material for conceptual and final model plz
@abhiivaidya6710
3 жыл бұрын
How to get inclined walls in models with accurate champher
@sf705
5 ай бұрын
Thank you
@just-freetime8428
3 жыл бұрын
Can anyone give me the tools in the video
@film.Tvwtam
3 жыл бұрын
Loved it!
@kylesinko
3 жыл бұрын
Thanks a lot!
@parmminhas1788
3 жыл бұрын
Ur funny
@kylesinko
3 жыл бұрын
Hehe thanks!
@abhiivaidya6710
3 жыл бұрын
Helpful🤗🤘
@kylesinko
3 жыл бұрын
Thanks dude!
@gaebren9021
4 жыл бұрын
Thank-you for that. How do you dispose of your blades? Used Blades?
@kylesinko
4 жыл бұрын
My pleasure Gae! As for the blades, I tend to wrap them up in anti-cut materials such as thick bubble wrap or put them in a closed box before putting in the regular bin. There's probably a more proper way to dispose of them but I'm not 100% sure
Пікірлер: 59