Couple little tips You can grind down the fromt of the caliper to make it fit better for your offset. Steel brake lines and upgrading the MC to a bigger one will really bring the brakes alive
@dabif7086
3 ай бұрын
What clips did u use for the pads. I did mine with out clips and I notice you had clips clicking into the pads. I have grinding and it gets stuck in reverse and there’s a clunk.
@Toonpiston
3 ай бұрын
We just reused the clips that were already on it, since I'm pretty sure the new pads did not come with new clips
@enriquecantarero
29 күн бұрын
supposedly it drive better without the clips in the calipers
@wahkitng4505
Жыл бұрын
do you need to change the brake proportioning valve , and master cylinder
@Toonpiston
Жыл бұрын
The porportioning valve is a must and it is best to change the master cylinder since the DX is different than the EX/integras
@wahkitng4505
Жыл бұрын
mines is ex
@fernandosotelo909
Жыл бұрын
Which proportion valve I need for a eg
@fernandosotelo909
Жыл бұрын
And master cylinder
@Toonpiston
Жыл бұрын
@@fernandosotelo909 the 40/40 propportion valve non abs. There's a abs and non abs valve so choose accordingly.
@izzyfuntmetv2704
Ай бұрын
When you complete the install, did you have any issues with the brake pedal being spongy?
@Toonpiston
Ай бұрын
at the time when installed no, but now currently it becomes spongy after driving for a bit
@izzyfuntmetv2704
Ай бұрын
@@Toonpiston did you fix the issue?
@yeahman1756
11 ай бұрын
or you can just do integra 94-01 RS/LS/GSR front brake coversion with their dual diaphram booster and master cylinder 15/16 with 40/40 prop valve.. closest to type R set up and a abs delete.. it works for me.
@Toonpiston
11 ай бұрын
Went with the CRV since they have the same caliper as the Type R and use the same rotor size
@bigstillow91
Жыл бұрын
Is there a big difference on the breaks? Stopping power? Etc.. and I been trying to get slotted versions and no luck
@Toonpiston
Жыл бұрын
I haven't done a good test on the brakes because of the wheel fitment and overall condition and where it's at. Once the car is in suitable condition with my set of wheels and tires on I might test it but, it should stop better than an ex model, and A LOT more than a dx model. This car most likely will not see the streets much until the build is done tho. I see a few slotted and drilled jus looking with the correct lug pattern and 280mm size, and they say it fits mini coopers from 07-15, so it might fit.
@alexisescobedo8115
8 ай бұрын
EBC makes just slotted rotors
@budgetbuild914
2 жыл бұрын
Always do the research first for a bbk 16" with a lower offset would be perfect
@mcanzy
8 ай бұрын
Will this be compatible with a honda del sol front knuckle?
@Toonpiston
8 ай бұрын
Depends on which model. The s and si won't work since it comes with the 9" rotor setup like the dx civic. If it's the VTEC model it should work since it has the same knuckle setup like the ex civic and integra.
@mcanzy
8 ай бұрын
@@Toonpiston it is a 262mm rotor from factory
@Toonpiston
8 ай бұрын
@@mcanzy you're good since you have the 262mm setup
@domenicolabarbera4308
8 ай бұрын
I have a civic ej9 with a 262mm from factory i can do it too? Without other knuckle?@@Toonpiston
@sheldonlamey7010
Жыл бұрын
Interesting seeing coupe content on YT especially 2 in one video everything else is mostly hatches.
@Toonpiston
Жыл бұрын
People just have no love for these coupes 🥲
@sheldonlamey7010
Жыл бұрын
@@Toonpiston yeah until It's too late ,in certain parts of Asia these Coupes are super expensive. The Black EJ1 coupes had way more screen time than Hectors green hatch even the Kid playing video games during the first race was in a white Coupe🤦🏾♂️🤷🏾♂️🏎️🔰
@sheldonlamey7010
Жыл бұрын
I heard the Coupe shape is more Aerodynamic than the hatch shape but I'm not sure though how true it seems to make sense. This Dude I met at a meet ( he had a 9 sec drag racing hatch) told me the reason you don't see Coupes anymore is because they're all on drag racing duty sitting in someone's garage..I don't believe that though I think a lot of them are in the junk yard 🤦🏾♂️🤦🏾♂️
@Toonpiston
Жыл бұрын
@@sheldonlamey7010 Don't know, people are moving on, the BRZ and WRX are the civics of this time.
@wahkitng4505
Жыл бұрын
how about the brake line eg or the crv
@Toonpiston
Жыл бұрын
The brake line is still the crv line that's on the caliper
@arielresto9950
Жыл бұрын
what year knuckles did you use ?
@Toonpiston
Жыл бұрын
I think they came off a 94 ex coupe. ex or integra works
@scratch99992001
Жыл бұрын
How did you like the bigger brakes up front and rear disc set up.was there a big deference ?
@Toonpiston
Жыл бұрын
I never really got to test the brakes in heavy breaking casue the car needs a windshield to drive on the road. It should theoreticaly perform as well as the Integra Type R becasue they are the same calipers. The rear disc conversion in general is better because you have to change the proportioning valve which changes the brake bias.
@angelarroyo3332
2 жыл бұрын
Did you use the same knuckles and what brake pads did you use
@Toonpiston
2 жыл бұрын
I have EX knuckles swaped on the car. EX, SI, or integra knuckles will work and brake pads are from 04 - 10 tsx
@angelarroyo3332
2 жыл бұрын
Ok thanks and the calipers are they from a crv or integra type r
@poopgoblin5
2 жыл бұрын
@@angelarroyo3332 crv and integra type r are the same
@Toonpiston
2 жыл бұрын
@@angelarroyo3332 CRV
@jasonbraganza1074
Жыл бұрын
ITR, RD1 Crv and prelude all have the same front calipers. They should be stamped "NISSIN 17CL15VN"
@cashmoneyivan4268
Жыл бұрын
What proportion valve , booster and MC u use ?
@Toonpiston
Жыл бұрын
The proportion valve is the 40/40 non abs since mine doesn't have abs. If I remember correctly, the booster and MC are from an EX civic.
@oodles86
Жыл бұрын
Can't use crv rotors?
@Toonpiston
Жыл бұрын
It depends. Since mine is still a 4x100 lug pattern I have to use mini cooper rotors because they are the correct pattern and 280mm. If you do a 5 lug swap, you can use crv rotors or itr rotors.
@oodles86
Жыл бұрын
@@Toonpiston oh, that makes sense 👍
@tico2186
2 жыл бұрын
Hey u know the part number for the rotors
@Toonpiston
2 жыл бұрын
I don't remember, as long as its 4x100 and 280mm/11in
@louielou8262
2 жыл бұрын
Nice work man, just missing those little rings to close the gap on the wheel stud holes
@Toonpiston
2 жыл бұрын
Yep, got them after the video. 👍
@dkinley334
Жыл бұрын
What rings?
@louielou8262
Жыл бұрын
@@dkinley334 they have these rings that go over the wheel studs that close the space between the studs and rotors
@louielou8262
Жыл бұрын
@@dkinley334 so there's no play on rotors
@louielou8262
Жыл бұрын
@@dkinley334 DELIVERED Brake Rotor Lug Centric Spacers Washer For Honda Type R Caliper For Mini Cooper
Пікірлер: 58