Great quote: "I don't measure a man's success by how high he climbs but how high he bounces when he hits bottom."
@prevost8686
5 жыл бұрын
There’s a lot of truth in that statement. The only ones that don’t get knocked down are the ones that never get in the ring.
@byrnejr
5 жыл бұрын
That is absolutely true!
@tomnagle2001
5 жыл бұрын
Love this quote!
@The_Oldguy
5 жыл бұрын
Warren, I love to watch a "master" use his FINE ADJUSTMENT TOOLS (hammers) LoL You're the best, please keep it up!
@xbarranch2
5 жыл бұрын
Warren I really enjoy watching your channel. I am just an old retired cop, but my dad was a heavy equipment mechanic so your channel is of interest to me. I also like your interaction with your dogs. Dogs are some of the best humans on earth!
@declankeating2290
5 жыл бұрын
love what u do buddy im learning a lot from all ur videos keep up the great work .all the way from ireland
@kerrygleeson4409
5 жыл бұрын
Alway interesting Warren thanks for sharing 👍🇦🇺
@barrysteenerson4890
5 жыл бұрын
good job there ,it's going to be as good as nearly new ,eh ,i hope the parts place delivers free , when they make mistakes ,with wrong stuff/parts .i like your comments ,very informative ,good o,
@Gordonseries385
5 жыл бұрын
enjoyed watching Warren take care
@seantatham9960
5 жыл бұрын
Excellent series Warren!!
@michaelmcdonald6727
5 жыл бұрын
Thanks much Warren, a little late night viewing!
@jayg479
5 жыл бұрын
Thanks for the upload from siskiyou county. When i get more money piled up id be glad ro have you work on my D5. THANKS
@duggandh
5 жыл бұрын
I thought about asking about the O-ring, Warren answered that question.
@chriswilliams5781
5 жыл бұрын
Really enjoying this rebuild
@pyro323
5 жыл бұрын
It helps if you take pictures before you take it apart that way if you have a question about where stuff goes you can just look at the picture and see where and how it goes.
@johnhatfield5877
5 жыл бұрын
Great job Warren,Thanks
@bertcollicutt8121
5 жыл бұрын
Warren your one cool dude and a great mechanic, would love to have a few beers with you and shoot the breeze.
@mlhrepairsllc6942
5 жыл бұрын
I have learned to plan on not doing what I plan on doing.
@neptunemax
5 жыл бұрын
Thanks Warren
@scottgibson7534
5 жыл бұрын
I need not teach to how to suck eggs, but all the seals will have a referance nuber on them, any bearing outlet should be able to either supply the seals or cross refferance them and supply. and usually cheaper than OE sourced parts and kicker is they will probably be the same. Keep up the good work and stay safe, all the best.
@buckhorncortez
5 жыл бұрын
Yeah, waste a lot of your time calling around trying to get a cheaper price and a delivery date...that's a good plan.
@mnbrown25
5 жыл бұрын
New drinking game: take a drink every time Warren says "What the hell do we have going on here?".
@dalebabbitt6185
5 жыл бұрын
Good videos man, thank you!!! What happened to part 2 on the dt466 front cover removal?
@timskiff9422
5 жыл бұрын
Pleasure to watch a qualified technician at work rather than the other hackers .
@genechronister7085
5 жыл бұрын
Another great vid!
@Bierkameel
5 жыл бұрын
9:55 It looked for a moment that the official torque spec was 3 uggahduggahs with the gun.
@tiredoldmechanic1791
5 жыл бұрын
It was often fun with the John Deere loaders trying to get the correct parts. They go by the machine serial number but often the components are from an earlier date. Could that cover have been replaced? Sometimes we had to use the number on the cover that the seal is installed in to get the correct part.
@actorzone856
5 жыл бұрын
Metal in a transmission can come from implements, one has to be careful as tractors use different transmission oil as well they may have problems so when you use that equipment you can introduce contaminated oil through the remotes, correct?
@d.f.v.6819
5 жыл бұрын
Warren, Your work ethic is incredible. I have a question is there a reason you don't prelube the bearings and seals?
@rickg-funk3144
3 жыл бұрын
Did you adjust the spanner nuts for the output shaft and counter shaft?
@blacksmoke5009
5 жыл бұрын
Thanks for sharing bud! How are you making out on the Peter Car ? Glad your getting some rain it’s been real dry here , cool nights but it’s getting dark around 7pm and has me all screwed up not enough hours in the day now to get shit done. Thanks for sharing take care 👍
@springer3783
5 жыл бұрын
I thought there was an issue that software wasn’t allowing anyone other than John Deere dealerships from repairing equipment. Did that all get straightened out? I’m in uk so I’m not up to date
@tipperaryger2241
5 жыл бұрын
My apologies Warren i thought you forgot about the o ring i jumped the gun a bit i should have known better
@KPearce57
5 жыл бұрын
If ya ain't bitchin ya ain't fixin !
@matthewscarberry8787
5 жыл бұрын
Is the logging truck done. Please im dying to see update on that peterbuilt i know u are busy maybe u could mention it.
@SuperJohndeere4020
5 жыл бұрын
Its not done yet, you can see the hood of it open at about 19 minutes in.
@matthewscarberry8787
5 жыл бұрын
@@SuperJohndeere4020 thank you sir
@mesh1248
5 жыл бұрын
I replaced the diff side seals on an 8320 they where wrong to had to cross reference with the old one to get it right
@noelhohberger1188
5 жыл бұрын
I thought this was an Ivt?
@springer3783
5 жыл бұрын
Where about a are you? Which state
@rharris5811
5 жыл бұрын
He is in Oregon
@ducky1496
5 жыл бұрын
Klymoth falls
@Romuls753
5 жыл бұрын
Nah, that shit's rude, plain and simple. It wastes everyones time because now you're doing extra work, the customer's put back that extra time that it took to clean the dust off of important surfaces, and for what? Some asshole didn't want to take the extra five or ten seconds to slow down to a speed that isn't going to throw up so much dust and dirt that it's as if someone was prepping the area for a crop or something
@donald1056
5 жыл бұрын
How much money does the powershift cost used/new - $20,000 to $40,000 - not cheap I know
@michaelmcclure8673
5 жыл бұрын
Evening I'm thinking saw one on the net, 14,500 plus a 5,000 core for a rebuild . And as the story goes you never know how good of a place did it off the net .🤔
@rickg-funk3144
3 жыл бұрын
40,000 at deere
@1dogpobo
5 жыл бұрын
Im must be smart as hell if you learn from your mistakes
Пікірлер: 50