After 45 minutes of trying to get the blower out - I finally found this video. All the other video's show the motor removed without having to release the dash - so glad you published this - had the gas and matches in hand... ;)
@polaris6644
10 ай бұрын
No excess chatter. Straight to the point. Very clear photography of the steps, and a good vocal walkthrough. Thank you. I'll be swapping mine soon.
@SombreroKnight
Жыл бұрын
Thanks for the installation video my blower just went out a few days ago in my 93 Chevy.
@rdharris77012
5 ай бұрын
Production quality timing and spacing is excellent. Advice also above average, you don't waste time on mundane things. Great job, I wouldn't even attempt this without your video.Haynes and Chilton repair manuals are less than adequate.
@battheman777
Жыл бұрын
Thank you for posting this! The best video I could find before had mentioned the dash needed to be lifted but didn't show how to do that. This is just what I needed to take on the task myself. Thank you!!!
@jkemmerer1993
Жыл бұрын
Good video, helping a 17 year old kid restore my 88 K1500 5 speed.
@oldbiker9739
Жыл бұрын
my 1991 GMC had a big rubber cover ,but it came out the same way you showed it , thanks worked great .
@erichopken7638
Жыл бұрын
I think they all had the rubber boot over them. It was for sound deading I think he is missing his
@kalebschulz1877
2 ай бұрын
Very useful!! Just did the blower motor on my ‘89. Super easy with the video! Thank you.
@patjohnson3100
Жыл бұрын
Useful video. I have a 1994 GMC Sierra whose blower motor squeals and squeaks intermittently. I see that removal is a bit more involved than I thought, so I think I'll live with it for now as you suggest. Your video is clearly and well done. By the way, the new carpet installation was well done. Thanks.
@sullivanshull9605
8 ай бұрын
Helped a ton. Mine had a foam/rubber cover for it, couldn't figure out how to get it off so I unplugged the wires and yanked it out 😅 But the job went smooth other than that, thanks for the video.
@robertbryant7771
Жыл бұрын
Subscribed. Probably the best howto on this job I've seen. Thanks so much for sharing this one!
@steverose2405
Жыл бұрын
My truck is an 88 Chevrolet 3500. The blower motor only has one electrical connection, an orange wire. It must be getting its ground another way. I think my blower might sit higher; I had to remove the glove box to access the upper blower screws. Liked your video.
@debowh
Жыл бұрын
I appreciate your honesty at the end 👍🏽👍🏽👍🏽
@jeffreygoparian2181
Ай бұрын
You just made that look easy! No curse words?!
@aronosonaicul8779
9 ай бұрын
Thanks for the video. Made it very easy to replace that part.
@justingarcia9444
Жыл бұрын
Had the same issue with the pulsing noise after installing a new blower motor in my 99 Suburban. Issue was solved after spending a few extra bucks for a genuine part. You get what you pay for
@SuburbanRanch
Жыл бұрын
@Justin Garcia Unfortunately I bought the GM genuine part! Still has the pulsating noise.
@davidrael8624
4 ай бұрын
Excellent Video! 🎉 Thank you. 🇺🇸
@drexterbabin973
5 ай бұрын
Thanks the video was direct and very informative
@pcdubya
Жыл бұрын
I saw this after doing mine a few months ago. I did it just hoping to improve flow by cleaning out leaves or whatever debris was in the evaporator since it's a 94' ( the original fan worked OK ). There was lots of dog hair and dust in there which I rinsed out. Just got the cheapest motor from autozone and works fine, not a ton of improvement though. Getting the rubber cover off was the hardest for me.
@JustinSims1983
2 күн бұрын
What are your thoughts about replacing the actuator door at the same time, seeing as they more than likely have the same wear time?
@castillojuan3280
2 ай бұрын
Can you do one on the cabin filter
@m.scottmunger4685
6 ай бұрын
Well done. Thank you
@DanneyTanner
Жыл бұрын
I came to this video trying to figure out how to get that rubber cover off of the blower motor. To me it looks like it's not possible to take that rubber cover off the glove box and unbolting a bunch of stuff behind the glove box
@SuburbanRanch
Жыл бұрын
Yeah. Sorry, ours didn’t have that cover.
@xNawfy
Жыл бұрын
I'm glad mine is under the hood
@Mr.WS6
Жыл бұрын
This is amazing!
@orgcoast5990
Жыл бұрын
Great video. I don't have a blower issue but I think I have an issue with the big plastic box next to the blower. Getting some funny noise from that area. If I use your vid as a starting point, can I get to the heater/ac box?
@SuburbanRanch
Жыл бұрын
@orgcoast You can get to parts of it
@timothyproksch2915
Жыл бұрын
Thank you
@zenbowhunter
Жыл бұрын
Great video. My blower sounds like a t-rex. Where did you get your replacement motor? Any brand recommendations?
@SuburbanRanch
Жыл бұрын
@Nate Allred GM motor from Rockauto
@user-wi3vq1zk2p
2 ай бұрын
Does it blow hard? I installed mine but I'm not sure if my evaporator is clogged or since the connections are switch it blows counter clockwise but mine doesn't blow hard
@SuburbanRanch
2 ай бұрын
Not super hard, but it feels right
@karlhungus545
Жыл бұрын
Is it the same for the 1995 to 98? My son has a 95. It only blows on the highest speed, so I think it's the resistor, but I was going to replace the motor at the same time as it's a little noisy after 315,000 km 😉
@benwrenchin
Жыл бұрын
Mine is noisy too, I just assumed this was normal for an '88. Might look into replacing it now. Thanks, Dan!
@SuburbanRanch
Жыл бұрын
@Karl Hungus I bet it’s the resistor if it only blows at one speed!
@benwrenchin
Жыл бұрын
Amazon says this part number doesn't fit my '88 K1500. It has gm genuine 15-80666 and a note that says PRESS ON. Any idea what's the deal there?
@SuburbanRanch
Жыл бұрын
@Ben Wrenchin’ Looks like Rockauto agrees, that part number fits a 1988. Not sure why it’s different than the 1990
@benwrenchin
Жыл бұрын
@@SuburbanRanch Follow up question, is the new one quieter? Mine is loud but I can't tell if it's louder than normal or did your video convince me it's too loud? Haha
@SuburbanRanch
Жыл бұрын
@Ben Wrenchin’ The new one is not much quieter!
@grampasquirrely
3 ай бұрын
I’m in the same situation, the 88 is a different part than this video. Did the one you buy fit it
@benwrenchin
3 ай бұрын
@@grampasquirrely I never bought it, and I sold the '88 and got a '94 Extended Cab. Sorry man
@user-ne7tb9kn9d
5 ай бұрын
How do u get the plastic cover off first
@SuburbanRanch
5 ай бұрын
Ours didn’t have one
@raederossi4903
Жыл бұрын
You failed to tell us how to remove the padded cover over the blower motor. I can't even get to the bolts holding the motor in place 🤔😫
@SuburbanRanch
Жыл бұрын
Sorry, ours didn’t have a padded cover!
@mp1791
11 ай бұрын
did you figure it out? Have the same issue... 😞
@antwanhouse7872
8 ай бұрын
This video is helpful but doesn’t show removing the boot that’s over top of the blower 🤔
@SuburbanRanch
8 ай бұрын
Sorry ours didn’t have a boot.
@kyleorrko
Жыл бұрын
How did you re-attach the clips to the kick panel?
@SuburbanRanch
Жыл бұрын
@Kyle Orr The clips just slide back onto the plastic panel. Use some pliers to remove them from the truck.
@JASKO-hh5ip
6 күн бұрын
You should've showed the noise it makes before changing only thing I don't like about the video
Пікірлер: 58