Nice car, this is a great platform for improving an already good car. I’ve made mine handle and brake good with BMR & UMI products, handles like it’s on rails, great car to track day with. Now just need to improve the stock engine 😃
@NoChillChad
Жыл бұрын
Yessir! I just added the full QA1 Suspension setup 💪🏾
@chrispambid8000
Ай бұрын
When it comes to hot rodding , nothing cheap.clean car very simple.
@Tax_Mny
2 жыл бұрын
This is a very clean build. Mind you I do not like F body Camaros although I love F body Trans Am
@NoChillChad
2 жыл бұрын
I understand. Trans Am’s look mean AF!
@jessetaylor3918
2 жыл бұрын
Picking up my 01 Wednesday extremely clean car built nitrous weekend/show car it’s a red ss also
@NoChillChad
2 жыл бұрын
Ooouuuu! I need to see that! 💪🏾
@jonathanhudson4623
2 жыл бұрын
Nice build. I have a pewter 2002 WS6 6 speed TransAm that I got in 2012 completely stock with 33K miles on it. I did all the free mods. Like TB coolant bypass Real ram air SLP lid Smooth bellows Ported and polished TB TB bump stop mod Got rid of the A.I.R. system Just all the free mods listed online I did add hooker ceramic coated long tube headers, a catless stainless steel y-pipe from TSP, and a spintech 4" catback exhaust system which I think uses a mufflex muffler that looks like a steel shoebox with dual 3" outlets. I did a shortened shaft B&M short throw shifter with a push button hurst pistol grip shifter for my nitrous system. I have a custom nitrous set up with a WOT micro switch, a full size race solenoid zex nitrous system with a fullsized purgesolenoid also, also got a bottle heater and pressure valve, and I also added a line lock. If you dont know what my red led toggle switches, momentary buttons do and where they are located you cant even drive my car. I'm running ZR1 replicas on the front and rear 17x9.5" fronts and 17x11 rears with 275/40r17 front and MTstreet comps in 31535r17s in the rear, they are the black ones with the machined lip. I'm running a stock 3.42 geared 10bolt with a T/A differential girdle and BMR panhard bar set up, which I'm lucky as hell has held up this long but it shows no sign of giving out. I'd post my N/A power numbers and my ETs but no one ever believes them even when they've watched me make a pass at the track but my car was a 12.6@114mph factory freak when it was box stock on cooper street tires and it's only gotten alot faster since. If I can't get you on motor I can always hit the bottle. It's not the fastest but it's still a badass 2002 WS6 6speed with a grand total of 71k miles on it. I was very sick and almost died so I bought my dream car and built it to break into a 10second 1/4. Most all of the mods I did I did in 95° heat with the car on jack stands with staple instead of stitches holding my stomach shut after a major surgery, two drain tubes running out of my back and I also had blood poisoning so I had a pic line in my arm ran directly to my heart to supply hardcore antibiotics. Luckily i didnt died before i was 30 (I'm 37 now) but i did get a 10 second pass out of her before I started being easier on her because she is my daily driver. These cars are awesome and I've always loved them and that's why I chose to get one to build before I died, luckily I'm still here though. Sweet build and keep up the good work. Be safe out there. There arent many of these bad ass rides left on the road in good condition.
@rudyhernandez3616
2 жыл бұрын
Just picked up an 02 Trans Am with Firehawk hood. Came with badass sound, Longtube headers, SLP AirLid. Badass F-Body Bro!
@NoChillChad
2 жыл бұрын
You’re definitely winning with that combo! 🔥🔥🔥
@tlsl-menace6649
Жыл бұрын
Where did you get your slp air lid
@tlsl-menace6649
Жыл бұрын
@@NoChillChad where you get your air lid thanks in advance
@NoChillChad
Жыл бұрын
@@tlsl-menace6649 it’s the stock air lid
@redrumss3464
Жыл бұрын
Throw a strut tower brace on, makes the steering feel much nicer👌🏼
@NoChillChad
Жыл бұрын
I was but the intake manifold I’ll be running will not clear a strut tower brace.
@MrSamz400
10 ай бұрын
Sick car man. Perfect all around. You kept it clean
@NoChillChad
10 ай бұрын
Appreciate it!
@raybusa6086
Жыл бұрын
Looks excellent...i have a 2002 trans am black on. Black...these cars are becoming timeless no matter how old they get
@NoChillChad
Жыл бұрын
Hell yeah! 🤟🏾
@alex2quick409
2 жыл бұрын
Just bought one recently trying to build it up yours is inspiring🔥🔥
@NoChillChad
2 жыл бұрын
💪🏾💪🏾 let’s build em together bro!
@swango1
8 ай бұрын
Love the F-body cars, man! I'm on my 9th one, a 2000 Trans Am. There's just something about these cars that hit right. Had a SOM 2002 SS back in the mid 2000s, daily drove that thing for 5 years and loved every second.
@NoChillChad
8 ай бұрын
#Goals
@elboss123456
2 жыл бұрын
my opinion they are better than welds not better than hre wheels but they are better than weld wheels
@NoChillChad
2 жыл бұрын
I do like them better for a stock rear end BUT Welds look nasty with a shortened rear end💪🏾
@grannationalboy
2 жыл бұрын
Just picked up a f body and I'm thinking about getting more active on youtube.
@NoChillChad
2 жыл бұрын
Cmon bro! It’s just documenting doing what you already love!
@paceta80
4 ай бұрын
Gorgeous Camaro. I love my '99 Trans Am. Look into some Katzkin seat upholstery. I have them on mine and love them.
@NoChillChad
4 ай бұрын
I’m getting custom seats from a shop. I’ve already got leather/suede from @apexleathers
@dariandareyawasmer6074
2 жыл бұрын
Cool vid man... Hey, paint your calipers. Advance sells a brush on paint for calipers that dries smooth. I highly recomend.
@dariandareyawasmer6074
2 жыл бұрын
Oh, never mind....lol
@NoChillChad
2 жыл бұрын
@@dariandareyawasmer6074 😂😂
@miatacheese
2 жыл бұрын
next thing you want a cool air and get rid of the factory air box and utilize that SS hood scoop! love the car, I have a 98 in same color
@NoChillChad
2 жыл бұрын
Hell yeah! I’m gonna incorporate it with my next round of mods with ported heads and throttle body.
@susanbrotman643
Жыл бұрын
OMG I love ur car!! RED can’t go wrong with RED. I have 2000 SS SLP in black
@NoChillChad
Жыл бұрын
🤘🏾🤘🏾 Black was definitely my next choice
@chrispambid8000
Ай бұрын
Put a magna charger, bolts right on top were your intake is located.
@unclebishoppeskitchen5838
Жыл бұрын
That thing is sweet. I just picked up a 4th gen and I have plans baby! But like you said shit isn't available and the shit that is available is mad money. It's all good though because I'm a mechanic and save on labor.
@NoChillChad
Жыл бұрын
Yeah saving labor cost is a game changer 😂 I can do a lot myself but I ain’t got the time or space, unfortunately 😔
@unclebishoppeskitchen5838
Жыл бұрын
@@NoChillChad time, space and money. The things we do for our vehicles.
@smokingasphalt8050
2 жыл бұрын
Hell yeah, love the car and the time and $$$ you’re putting into it bro. Looking forward to seeing more of this build👊🏼
@NoChillChad
2 жыл бұрын
🙏🏾🙏🏾🙏🏾 Bro! Thanks for the kind words! Been following your build too! I’ll try to keep it coming 💪🏾
@smokingasphalt8050
2 жыл бұрын
@@NoChillChad 👊🏼👊🏼🔥🔥🔥
@rogermiller4016
Жыл бұрын
Man, nice. I have a 1999 Z28 and looks identical. You have done a good upgrade. Really like the car. I up graded my trans. to a L 80 and had Strange Engineering build me a Dana 60 for the rear end. Doing motor this winter. The rear differential made a huge difference. Glad to see others with these cars. Good luck with your build, looking good. 😊
@xxcowboyjamxx
Жыл бұрын
lol had me rolling Chad when you were talking about cost and parts availabilty. I had planned on going with the BMR cradle bushings but because of availibitly I went with PFDAT metal cradle bushings. Your wheels look good and do resemble Welds. I have the BTR stage 3 in my NA 5th gen and I get lots of compliments on how it sounds . You may want to reconsider your front shocks so you can adjust for compression and rebound. Got to hook !
@NoChillChad
Жыл бұрын
Check out my most recent videos with my new wheels 😎 yeah I’m going with coilovers soon.
@freddyguerrero8241
Жыл бұрын
I’m going home now and I’m gonna take my lunch break and get go home and shower shower then I I have
@copperstatestudiosPhxAZ
Жыл бұрын
Brilliant looking, I just purchased Berger 2001 . Paint finish is awesome on yours
@0n374
Жыл бұрын
check out quick performance for your 9" rear end needs. As far as the heads go, your car is an 02 so its probably got the 241 heads, which aren't bad. Looking at the left bank head, there will be a number stamped on the front corner of the head.
@NoChillChad
Жыл бұрын
Yeah I’m going with QP or strange. I’m gonna go with 243 heads most likely.
@XxChicagoGuyXx
2 жыл бұрын
Man your car is beautiful it makes me miss my 6th Gen. I wish I'd ever got rid of it. 2SS fully loaded red interior and red outside car was sick.
@galvinSPORTS911
2 жыл бұрын
Hell yeah man. Car looks and sounds good. Btr stage 3 is a great cam spec for cruising and bustin ass
@NoChillChad
2 жыл бұрын
Bingo!🎯🎯😎
@martiniusetihw
2 жыл бұрын
You're coming along well bro!!! F bodies are definitely not cheap to upgrade if you are doing it the right way! Hang in there though, because once it's done you are going to really turn heads!!!! These cars, Even though they are old, always attract a lot of attention when they are modded right!! I have an 01' trans am WS6. I have my cam,heads and rods. I am now looking to forge my bottom end before I do the rest of the small things. Headers, double timing chains, rocker trunions upgrades and etc. Your wheels and tires are tight!!!! Keep em'. I love the car brother. You've got great taste!!
@NoChillChad
2 жыл бұрын
Thanks for the motivation bro! I’ve got some new mods coming in a few weeks! Stay tuned!💪🏾
@martiniusetihw
2 жыл бұрын
I sure will brother!! Keep up the good work!!
@ryanmatchett6481
2 жыл бұрын
Nice ride. If yer looking to stand out, add some ground effects on her with a mild wing. Lots of attention and I get lots of compliments. Only get to drive for half the year up here is the only shitty part besides the annual checkup. Keep on keeping on and keep her sexy lol
@junitoss83
2 жыл бұрын
That car looks amazing. I miss mine
@NoChillChad
2 жыл бұрын
🙏🏾🙏🏾 Thanks Man! You can live vicariously through me 😅
@junitoss83
2 жыл бұрын
@@NoChillChad amen lol. I have a 2019 2SS 10 speed but I’m looking to sell it to get a 67 Chevelle🙌🏻
@NoChillChad
2 жыл бұрын
@@junitoss83 make sure you check out my 1st video of my 6th gen. I may get another one 🤔 but we’ll see…
@speedracer4229
2 жыл бұрын
I'm in Texas too. Got an 02 SS. About to do a H/C/I swap on mines.
@NoChillChad
2 жыл бұрын
Oh yeah! That’s gonna be wicked! Can’t wait to hear it!
@formulacam
2 жыл бұрын
i’m finishing up my build. i need to post more videos but i need that corsa on mine asap
@keshawnthompson7225
Жыл бұрын
Oh man I have my channel created I also have a fbody 98 z28 clone build Nd just seeing this just motivated me even more to just go for it I’ll be tuning in forsure
@andrewvanheldorf
Жыл бұрын
Sick ride!!! I got a 91 trans am gta (as in profile pic) big f-body fan love me a sick camero! Well done vid too
@NoChillChad
Жыл бұрын
Thank You for showing love! I love that GTA you got!
@4stringbandit696
2 жыл бұрын
Beautiful car man. I just acquired a 98 Z28 6 speed with 7,500 original miles. I can't wait to start adding upgrades and having fun with it.
@NoChillChad
2 жыл бұрын
Oh yeah! That’s gonna be a fun ride!💪🏾
@tune1398
2 жыл бұрын
How did you find a good deal like that?
@4stringbandit696
2 жыл бұрын
@@tune1398 I just happen to be surfing the net and found it at a consignment dealer ( GR Auto Gallery) out of grand rapids Michigan. I did have to drop the transmission due to 4th gear issues and the u joints were dried out.
@calebgotthardt4774
Жыл бұрын
Yooo I just bought a 98 z28. Unfortunately the engine has 100k miles but I got it for 1.5k and it runs very well so I’m happy with it
@mscheets1
2 жыл бұрын
Nice build, car is super clean. You add a trans cooler with the converter?
@NoChillChad
2 жыл бұрын
Yes, we did add the trans cooler. I always forget to mention that thing 😅
@rudyhernandez3616
2 жыл бұрын
Killer Setup, next up for me is heads and camm
@MrLeeCamaro
2 жыл бұрын
Take the time and build it right. Great video Chad.
@prorusher3181
2 жыл бұрын
Catfish Camaro absolute buety keep up the great work buddy
@NoChillChad
2 жыл бұрын
Will Do, Bro!💪🏾
@jameyhankison2681
3 ай бұрын
Nice ride man!!
@MM8verick5
Жыл бұрын
It’s a beauty! Thanks for sharing this, this is the inspiration I needed for continuing on my 02 z28
@NoChillChad
Жыл бұрын
🤘🏾🤘🏾 keep going!
@victor_beltran
10 ай бұрын
Nice car bro how much hp you getting now with the kids you’ve done tk it
@NoChillChad
10 ай бұрын
im at 450rwhp right
@samo63
Жыл бұрын
Looks LIT bro, keep Fbody Alive 🙌 I also hv 02 Maro and this thing keeps wanting more upgrades 😁 I feel u bro.. Love from Az
@LSxMotorsports2021
2 жыл бұрын
The car is looking Great.
@NoChillChad
2 жыл бұрын
Thanks man! Slowly but surely it’s coming along!
@Freddy_Confetti
10 ай бұрын
Guys got good taste
@NoChillChad
10 ай бұрын
Thank you so much! Subscribe bc I’ve got some really big announcements and parts coming in! 😈
@ryanmatchett6481
10 ай бұрын
Great reveal of the work so far. I have a 94 with a 6 speed, my baby. Lol. Can't ever see me selling her unless it's in a deal for a Vette. Not the most power but well over 300 with mods from previous owner. Any plans for a super charger in the future for your ride? I'm waiting to see for the best results. Thanks for the upload!!
@Kingpolo219
2 жыл бұрын
I got a 02 z28 I’m thinking of getting the moser rear end as well those tear ends are weak
@dnlescalante7
Жыл бұрын
It be nice if it had Manuel trans!
@fbodyrell
2 жыл бұрын
Thanks for the recommendation cuz I definitely follow u on ig 😂🙌🏽 clean build bro 💪🏽 my ls1 SS will be done this year
@markc4358
2 жыл бұрын
Car is super clean 🔥
@NoChillChad
2 жыл бұрын
Thanks so much!
@rickmarks7685
2 жыл бұрын
Your camaro is gorgeous 👍
@NoChillChad
2 жыл бұрын
Thank you so much!
@dondagy9109
2 жыл бұрын
Beautiful car. Nice tasteful build.
@jakobholgersson4400
Жыл бұрын
Stunning looking car. I'm considering one of these. Have you considered to get the Heidt Rear Independent Suspension kit?
@NoChillChad
Жыл бұрын
Yeah I’ve looked at it a few times but whew! Bwoy it’s pricey! 😂
@jakobholgersson4400
Жыл бұрын
@@NoChillChad My thoughts too. But IMO, the live rear axle is the absolute worst thing about that car.
@NoChillChad
Жыл бұрын
@@jakobholgersson4400 well it depends on what you’re doing. Drag racing, that solid rear axle is a beast!
@01ZO6TT
Жыл бұрын
Your car looks and sounds great bro! I have a 02 SS that’s white and am thinking about the Welds. What are your thoughts on the BMR Springs. I’m going to lower mine also. Thanks
@iftnation
2 жыл бұрын
950 babyyy
@gambreltoyota9588
2 жыл бұрын
Love your car!!! It looks sweet!!
@NoChillChad
2 жыл бұрын
Thank you! I really appreciate it!
@jamesfarris9870
Жыл бұрын
It sounds fantastic!
@wheelz7244
2 ай бұрын
Hey bro love the videos you post of the camaro looking to get a procharger for my 96 camaro z28 as well what yours run you n where you get yours from
@NoChillChad
2 ай бұрын
I ordered directly from Procharger
@jjohnson479
2 жыл бұрын
Awesome looking car bro. I'm working on my '02 SS as well. Your making a HUGE mistake with the solid motor mounts and Poly trans mount. All three should match, which ever one you do. I hope it last for ya. You really built it up!!
@NoChillChad
2 жыл бұрын
Man, I’ve heard multiple stories. People are saying the solid trans mount make the car ride rough. This build needs to be flexible for an enjoyable Sunday cruise and Friday night racing. So far it’s cool but who knows what the future holds 😅🤞🏾
@morboost4224
2 жыл бұрын
It’s all over forums not to do both solid. I tried it and broke my bellhousing 3 times because it stresses everything and when there’s no flex it breaks the weakest link. Run one poly and one solid just like he’s doing or both poly if you’d prefer but don’t do both solid.
@NoChillChad
2 жыл бұрын
@@morboost4224 Bingo!🎯🎯
@michaelcannizzo1076
2 жыл бұрын
@@NoChillChad I ran all solid, ripped em out; car was terrible. I went all poly, ripped em out too much vibration. Went back to stock GM and car is smooth as can be. Having an auto removes a lot of stress. I promise a lot of us have made all the mistakes so use us. I have a 98 Auto that I have owned since 2003, and still run the stock rear. If you aren't neutral dropping or aren't heavy drag racing putting slicks on you don't need a 9 inch. As far as trans, 4L80E it won't fit without modifications, I have a 4L60E Monster trans built to hold 700Hp, promise you will be Golden. The trans is an electronic 700R4 that's been around since 1982, plenty of tech out there to make them hold up. Hit me up if you need any advice
@shaun9156
Жыл бұрын
@@michaelcannizzo1076 well please explain that to my 10 bolt that decided to grenade itself lol...s60 is in now.
@LUGOM1KE
2 жыл бұрын
Looking good my boy!
@NoChillChad
2 жыл бұрын
I appreciate it. 💯
@C5Zautoxandtrack
2 жыл бұрын
suuuper clean!! love it
@NoChillChad
2 жыл бұрын
🙏🏾🙏🏾 thank you!
@TheDevicemanager
Жыл бұрын
bro i love the looks of those rims.
@TheBrightLow
2 жыл бұрын
Looks like we’re on the journey together! Are you on any of the FBODY groups on Facebook?
@DjBabylaccProductions
2 жыл бұрын
Nice car I have a 94z28 who did your engine work I'm in the Katy area
@NoChillChad
2 жыл бұрын
kzitem.info/news/bejne/xYRj2n6tknyTY4o
@ShadowFox1141
2 жыл бұрын
Following!! Good start mid list for my F body!!
@NoChillChad
2 жыл бұрын
🤘🏾🤘🏾
@sucapizda
2 жыл бұрын
Man, you should try doing one of these up in Canada. We have absolutely NOTHING up here. It all has to come from the US. And its even more expensive that way. Nice car though. Cheers.
@NoChillChad
2 жыл бұрын
Man, I still need to make a trip up to Canada. Is Ontario the best place for the city vibes?
@sucapizda
2 жыл бұрын
@@NoChillChad Yes Toronto Ontario is ok. Even better is Montreal Quebec. I’m the summer only tho. Best night life in Canada I’m Montreal. Bars are open till 3 am. Friendly girls to.
@NoChillChad
2 жыл бұрын
@@sucapizda putting it on 2022 travel list!
@sucapizda
Жыл бұрын
Such a nice ride. How is the fitment of the front Cosmis rims? Do they rub anywhere? They look like they fit really nice. What size tire in the front?
@NoChillChad
Жыл бұрын
The fronts never rubbed. They fit perfect. 265/35/18
@alanrequimin1580
Жыл бұрын
Did you use any kind of spacer for the wheel ? If so what size and where did you get them. I like the set up. Might do the same. Good looking car.
@NoChillChad
Жыл бұрын
No spacer. These wheels are discontinued.
@connormcdowell8583
Жыл бұрын
Got me feeling left out with a lt1 and y’all got ls lol
@NoChillChad
Жыл бұрын
Man, I’ve seen some nasty LT’s but Bwoy they are a bitch to work on 😅
@markrodriguez5638
Жыл бұрын
Nice ride man. How do you like the BMR mounts? Can you feel it inside the car while driving or at idle? Thanks!
@NoChillChad
Жыл бұрын
Nope, not at all.
@ls14turbo
Жыл бұрын
What proclip did you use
@tearsinsilence
2 жыл бұрын
Need a strut brace bar to keep it from twisting the chassis
@NoChillChad
2 жыл бұрын
I was holding off because I didn’t know if i was going with an LSA or Procharger. Didn’t wanna waste money lol
@shaun9156
Жыл бұрын
sub frame connectors are more useful than a tower brace, all over the forums people say not worth it for the tower brace. you could put the money into LCAs instead.
@dannygarcia9989
2 жыл бұрын
Damm clean car 🔥🔥wanna make mine this clean 🔥
@NoChillChad
2 жыл бұрын
Hopefully you can follow along and let me make the mistakes for ya 💯
@demarques1911
Жыл бұрын
I subscribed. Fuck with my people
@johnescamilla4024
Жыл бұрын
how much did it cost to do the cam kit and tune? are you located in TX looking to get my SS done
@sammykosmas6640
2 жыл бұрын
Beautiful!!
@GearheadOutlaw
2 жыл бұрын
Sweet. Keep it simple
@NoChillChad
2 жыл бұрын
I do love a clean and simple ride. It’s timeless!
@GearheadOutlaw
2 жыл бұрын
@@NoChillChad yeah man enjoying you videos. Stay safe
@vonskiii9252
2 жыл бұрын
Did you have to cut the kmember for the headers?
@NoChillChad
2 жыл бұрын
No, we did not.
@Seancc0424
2 жыл бұрын
Very nice car man!
@CRUSH71
9 ай бұрын
I'm looking to buy a 2002 Camaro SS 6-speed with t-tops. Navy blue with 14500 original miles on it. It was owned by a collector and garaged. The car looks like it just rolled off the showroom floor and drives the same. The asking price is $22,500. Do you think this is a good deal?
@NoChillChad
9 ай бұрын
A little high. I’d say $18-$$20k at most.
@CRUSH71
9 ай бұрын
@NoChillChad Thank you. I was thinking maybe 19k. The dealer has had it a while, and I may make that offer. I'm sure they will turn it down, but I'll let them know to call me if they decide they want to let it go for that.
@NoChillChad
9 ай бұрын
@@CRUSH71 honestly, if you’re gonna drive it, I’d find a clean one with 40-50k miles and save a ton of money. Especially if you plan to modify it. You can find a documented and tastefully built car for $18-$20k.
@pabbqmgv
2 жыл бұрын
Nice damn car bro.
@lambo.doesit
2 жыл бұрын
What rear offset on wheels would you recommend for a stock 10 bolt rear end ? I want my new set of wheels to fit flush with my rear fender not planning to go 9inch ford shortened anytime soon
@NoChillChad
2 жыл бұрын
It’s a loaded question. You Need to know what size wheel and what tire to determine the “perfect” offset. Usually the wheel company you order from would have the proper offset available.
@lambo.doesit
2 жыл бұрын
@@NoChillChad I want to run a 17x11 on the rear & 17x9 front, but not sure on offsets 🤔
@NoChillChad
2 жыл бұрын
@@lambo.doesit offset range is +45mm to +56mm. So somewhere in the middle should be fine
@lambo.doesit
2 жыл бұрын
@@NoChillChad what offset are you running on yours brotha
@bhcamaro2002
2 жыл бұрын
Looking good man 👍
@Aerozona23
Жыл бұрын
3rd gens are expensive too :(
@hectorleon8373
2 жыл бұрын
What brand switchback did u go with?
@NoChillChad
2 жыл бұрын
I didn’t do any switchbacks. Just standard orange halogen bulbs
@trevonwilson1
2 жыл бұрын
Honestly you need a more aggressive hood. That stock hood does nothing for the car.. Check out the sunoco 4" hood from VFN
@NoChillChad
2 жыл бұрын
The hood and SS wing is the reason I’ve always fell in love with this car. The VFN Sunoco hood as been the only hood I’ve considered to get until I found a company to create the C7ZR1 hood for my car. #StayTuned
@jeremiahsemonis8524
Жыл бұрын
I like the stock SS hood, it looks good. Even if it doesn't add much in the way of power.
@g4offroad673
2 жыл бұрын
Nice car!
@warhammer9587
2 жыл бұрын
Too clean 🧼
@michaelchaneyjr.3763
2 жыл бұрын
What part number do you use for bump stops in the rear?
@NoChillChad
2 жыл бұрын
All the part #s and links are in the video descriptions 💪🏾
@lifeof_torrey2309
2 ай бұрын
That shirt gas bro do you still have these in stock? 💯
@NoChillChad
2 ай бұрын
Yes I do! NoChillChad.com
@harvmurr8384
Жыл бұрын
Chill, can you say more about your wheels not fitting the best? I'm in the process of ordering some rims, and they are 18x9.5 and 18x10.5 thanks!
@NoChillChad
Жыл бұрын
My new BC Forged wheels are 18x9.5, 18x11 and they fit perfect. These specific wheels are one size only and the offset isn’t proper for my vehicle. They look good but the fitment is not good.
@NoChillChad
Жыл бұрын
kzitem.infoXvv6i2UWxTY?feature=share
@harvmurr8384
Жыл бұрын
@NoChill Chad perfect thanks for answering. I needed to make sure the size i sent you was correct. According to the site, they are, but sometimes they will not fit. Your car was so sexy to the point that I went out and brought one. Lol, keep it up. I'll be following your channel!
@NoChillChad
Жыл бұрын
@@harvmurr8384 NICEEEEEEE!!! I’ve got some new things in the works this year! Great to hear!
@NoChillChad
Жыл бұрын
@@harvmurr8384 you’re gonna need one of these lol www.nochillchad.com/shop-rEKIC/p/f-body-or-nobody-tee
@Dapowerranger
2 жыл бұрын
Love it dream car for me😊🔥
@Ej_vielbaum
2 жыл бұрын
I’m so confused where y’all find the 8x120 wheels I’m looking everywhere
@NoChillChad
2 жыл бұрын
They are currently discontinued. They are supposed to bring em back out at the end of the year per the manufacturer.
@chandlergardner6655
2 жыл бұрын
What whp are you at now
@NoChillChad
2 жыл бұрын
400rwhp
@ls1_cammeroh
2 жыл бұрын
Beautiful car man mine looks like poop compared to yours
@Eastsider420FU
2 жыл бұрын
How much power did it do?
@NoChillChad
2 жыл бұрын
400RWHP
@bobd9911
Жыл бұрын
These cars are cheap until you dive down that rabbit hole on the upgrades LOL
@NoChillChad
Жыл бұрын
Every car I touch… I go down the rabbit hole 😅😂 crazy part is, this car isn’t any cheaper than a newer car 🤣
@bobd9911
Жыл бұрын
@@NoChillChad yeah I wasn't planning on putting a lsa in mine. Just a LS3 and fast 102 intake and throttle body and a nice camshaft with that suspension upgrade. Then I won a LSA supercharger in a contest. I thought it was going to be easy pleasee nope down the hole I went. Then all the modifications I had to do fit that into my car and keep my windshield wiper. I got to keep my windshield wiper and it looks clean
@NoChillChad
Жыл бұрын
@@bobd9911 yep, I wanted LSA but I’m just doing Procharger and calling it a day.
@bobd9911
Жыл бұрын
@@NoChillChad a lot easier but depends how far and elaborate you go with it
@Furyataurus
2 жыл бұрын
No bmr k member??? :( No Detroit Speed fender brackets??? :(
@NoChillChad
2 жыл бұрын
Not yet. Both items are on my list. K-Member when I do the front suspension. There are just sooooo many things I want to do but I’ve got time. Stay tuned!
@night7185
2 жыл бұрын
are the wheels black or gunmetal?
@NoChillChad
2 жыл бұрын
Black.
@night7185
2 жыл бұрын
@@NoChillChad I'm a little new to this, the bolt pattern for all the Cosmis XT005Rs is different than the one on fbody Camaros, how did you get it to fit?
@NoChillChad
2 жыл бұрын
@@night7185 5x120mm and 5x4.75” is pretty much the same thing. One is in mm and the other on inches. 4.75” = 120.65mm. So It’s a very slight difference. They both fit each other though.
@night7185
2 жыл бұрын
@@NoChillChad The ones I'm seeing on fitment industries and other wheel sites are 5x114.3 (5x4.5) or 5x100?
@NoChillChad
2 жыл бұрын
@@night7185 the 5x120 is discontinued. They are supposed to re-release them at the end of the year
@elboss123456
2 жыл бұрын
cosmis are not cheap wheels
@NoChillChad
2 жыл бұрын
It’s not cheap but much cheaper compared to a billet or true forged wheel.
Пікірлер: 214