Sir, you are doing a great service explaining this stuff. I really appreciate, thank you
@schenkevin7
6 жыл бұрын
TRIGGERED!!!
@shahfacekillah
Жыл бұрын
I recently converted my acoustic drums to electric. Mesh heads in everything with Roland triggers. Everything plugged into a Ddrum DDTI interface, midi out into my laptop, running on ezdrummer software. It's great in terms of being able to practice at any hour without disturbing anyone, BUT it really takes a lot of time fine tuning everything. Getting the proper head tension, cross talk, retrigger, threshold, sensitivity settings, everything. I've had it for over a month and I'm still making adjustments from time to time. It's a real pain to get everything working the way you want, but once you get it, it's pretty awesome.
@pepec52
3 жыл бұрын
Perfect!! 👌🏻 Excellent information, it's only 15 min, but it requires so much time, experience and attemps to learn all of that. It is also perfectly explained!! 🙌🏻🙌🏻🙌🏻👏🏼👏🏼👏🏼👏🏼
@RachaelAndries
2 жыл бұрын
Like other commenters I just want to thank you for putting out these videos! They are so informative and helpful for learning about every aspect of Edrums. I frequented your channel a lot in 2019 when I was deciding what kit to buy (I ended up getting a td17 kvx) but now want to convert an acoustic kit and I feel like you have video for every question I could ever have about it!
@chriscrawford3706
4 жыл бұрын
I have an internal side mount from a company called Convertible Percussions. It works flawless. Very little tweaking needed when I used it with a Roland module.
@OftheSeven
4 жыл бұрын
Chris - did you use them on the entire kit - kick, snare and toms? I'm thinking of ordering a set.
@johndef5075
2 жыл бұрын
Im thinking of getting one. If I cant get this rt-30 to work right I will be....
@johndef5075
Жыл бұрын
I sold the RT30 and made a Convertible Percussions snare. All functions work well including positional sensing. Great prices and solid simple construction.
@Vdrumtips1
6 жыл бұрын
Well summarised. The 1. reason for the “arm on every lug” is minimising unwanted resonance. The centre trigger vibrates after every hit, that leads to unwanted trigger signals from both head and rim piezos. It basically distorts the otherwise clean signal. Second reason is stability: A bar (Especially that thing from Jobeky) bents on every hit. The pickup moves downwards on every hit. Signal is disturbed even more. So you try to adjust this in the module by cancelling retriggering etc, until the pickup range is so much limited that you cannot play very soft hits, not fast hits after each other. If Jobeky would at least use a U-shaped profile like R-drums does, the result would be better. I would have categorised the triggers even more, into: Quality triggers and “DIY solutions out of tool shop parts”. The Roland RT-Triggers, R-Drums Triggers and DDT Triggers are quality solutions. While the rest is just a Saturday afternoon project, labelled as “product”.
@JMRSplatt
5 жыл бұрын
Hey, the Roland TM-2 is a FANTASTIC option. Highly suggested. Several sounds, SD card, midi in/out.. 4 inputs, just a great little thing for $200
@harshadkale3046
5 жыл бұрын
JMRSplatt it has 2 inputs and 2 outputs not 4 inputs
@zDerezzed
6 ай бұрын
@@harshadkale3046 He probably meant it has 2 stereo inputs. 2 physical input jacks that can receive 4 total input signals.
@rolandedrummer9723
5 жыл бұрын
I used the stick on type in the early 90s. For me the worked PERFECTLY. Never any problems. triggered acoustic drums into an Alesis D4. Good times. Wish I still had that setup. super easy. Hybrid electric kits are my favorite. 100% electric is WAY too sterile.
@hughbetcha6922
2 жыл бұрын
Great video - much valuable information. I can see you demonstrated the drum module adjustments on a Roland T-30. Would love to see adjustment capabilities demonstrated on a variety of brands / models. Maybe do a round-up of all the different models of drum modules and their pros/cons. Thank you for your efforts.
@johnpietrolaj8917
6 жыл бұрын
I use the Pintech internal trigger bars and they work great! I converted my old Pearl Export set from 1980. I also use a TD-9 module with the Ddrum DDTI trigger interface triggering EZDrummer 2.
@FranksDrumCave
6 жыл бұрын
Very useful information! I've been looking at possibly doing a A2E, so this will definitely help me get the trigger set correctly
@tonymilone5458
Жыл бұрын
Nice job explaining all that! Thank you!
@parcoforer3335
5 жыл бұрын
Excellent video ! I just bought a Megadrum module, it does the positional sensing unlike the DDrum DDTI ,also 3 zone cymbals and a bunch of inputs (56) ! Very promising.
@DrumsBob
5 жыл бұрын
I'm looking for A2E triggers now. This video was very very helpful, thanks!
@Naitsirk808
Жыл бұрын
Excellent resource, nice work! ☺️👍
@GothicDude-mu5qf
3 жыл бұрын
if you want a permanent conversion from acoustic to electronic, you can get four pads out of two toms by cutting the shells in half, and do the same for your floor tom and use the other half of the floor tom as an electronic bass drum by mounting it to a tower.
@johnpietrolaj8917
6 жыл бұрын
Excellent tips! It's also something good to refer to at a later time if needed.
@timhansen5162
Жыл бұрын
Absolutely great video! Thank you so much
@livemusicalgarve
4 жыл бұрын
Excellent advice, thanks so much.
@KingsDenStudios
Жыл бұрын
Appreciate this! 👊👊
@drewlawrence696
5 жыл бұрын
There are also the Yamaha die-cast & chromed rim-mount triggers, which IMO, have the best aesthetic of all the rim-mount triggers :) How about a video-visit to edrums of the 'past'...some of which can still cut-it in the real-world, the Clavia Ddrum 4 for instance ;-) They can also be had for very little money, for those on a budget. In the past I've owned the Alesis DM Pro & DM 5, the Yamaha TMX, Simmons SDS9, Yamaha DTXtreme (I & II), Yamaha DTXpress, etc etc ad infinitum.
@FrancoArea51
3 ай бұрын
Great Tips!!!.
@georgeswca
7 ай бұрын
Can you use multiple side-mounted triggers (inside the drum) or clip-on triggers and chain them together?
@AzureCity
4 жыл бұрын
Hey Justin! This is really helpful!
@matthewhewer9032
6 жыл бұрын
Hey Justin! Great video!!! I totally did not know about the mask time witch will help me a lot. I sometimes have the issue you mentioned with the kick triggering that "beater bounce". Thanks!:)
@gamebred1910
18 күн бұрын
This also works for double bass triggers? Like OnTrigger, Footblaster etc...?
@carlupthegrove262
4 жыл бұрын
Thanks...very helpful
@ceflo317
5 жыл бұрын
Great points here! Are you also going to talk about electronic diy hihats and cymbals?
@JCool4U
3 жыл бұрын
Can converting an acoustic kit be as good as the new VAD706? Or are electronic drum triggers that much better?
@mclarkin0906
Жыл бұрын
have you ever used any of these on Roto Toms?
@n9ne-
Жыл бұрын
thanks for this great vid!
@pehuensecches2548
4 жыл бұрын
yeaa men, this is the video that i was looking for
@darkslide6459
2 жыл бұрын
Hey justin i love your channal and you are making mee goot feel to make a conversion. (Sorry fire my bad englisch i am from swiss and not the best writer. Hahah) I have a problem that my triggera v3 settings not the best can you help mee out? My rim triggers not so good i wone have a rim sound and a head sound what can i doo in the settings? And a other question. Can you help mee ore make a video how to do triggersettings in the td27 for the triggera v3. Thanks i hope you can help mee out! Love your channel!❤️
@rondeangelis7384
2 жыл бұрын
Very good info all u need to know . Anyone know on the internal side mounted triggers what the distance is from the shell? Fie exampke, Is it the same distance as top mounted triggers like Roland and yamaha?
@crackthefoundation_
5 жыл бұрын
Great video thanks
@KTsStory3517
6 жыл бұрын
Great info...thanks!
@dr.shinephd
2 жыл бұрын
Jobeky internal side trigger vs Tiggera intrigg internal side trigger?
@massimoresnati
7 ай бұрын
thank you very much for the video, very useful to get an exact idea. I am using an old, but still functional ROLAND TD-8 module for the rehearsal room, I am using the ROLAND dual RT-30 triggers, but I am not completely satisfied, I find the way of fixing on the snare rim and with the time creates unwanted vibrations and sounds. What would you use, considering the TD-8 module? Thank you
@ralphcalkins7409
5 жыл бұрын
i'm thinking of getting DDrum red shot triggers for my acoustic set, will i be able to plug this in to my td17 drum module?
@markkeneson6806
6 жыл бұрын
What works best for triggering on an acoustic drum kit. In other words, triggering off of mylar heads to use live for mixing the actual acoustic sound of the drums with electronic sounds from a module or some such source? I have no interest in using mesh heads.
@ing.eduardomunizrodriguez3554
4 жыл бұрын
Great info Justin!! I really want to have a real drum conversion, i do have some ALESIS DM10MKII drums hat I’m using right now, the triggers inside looks great or at least more complicated design that the ones from other brands, but I never test other ones, what do you think is better? Take apart the DM10MKII drums and put that triggers inside the new shells with some DIY bars in to the lugs..... Or just buy ITM2 triggers, what do you think will trigger better, with more Dinamics? Thanks!! I really enjoy all your videos!!
@solosection4524
4 жыл бұрын
Can you use a dual trigger if your drum kit doesn’t support dual zone pads??
@shane4494
5 жыл бұрын
Have you had any experience with Magnatrack drum triggers and symbols? They look very interesting.
@65Drums
5 жыл бұрын
Yeah I bought some, and I returned them to get my money back. They stopped being sensitive 2 weeks in. Also the magnet wasn't strong enough to stay together on a 3ply mesh heads
@bobbyjones2112
3 жыл бұрын
I kinda like the lap type sound source idea. I have no idea which way to go. I need someone to tell me what’s best. I have 7 pc Tama drum kit, not counting cymbals.
@LeahStorm
5 жыл бұрын
Great info, well organized, interesting and helpful. Plus cute dude. ;)
@Ayushdrums
3 жыл бұрын
2 box trigit triggers vs ddrum redshot Which is better?
@gabs.music_ok
5 жыл бұрын
Hey there.. I have a problem with my Roland RT30 trigger.. when I use it on my snare drum (either with mesh heads or with regular heads) it doesn´t produce any sound when I hit a rimshot. I can see the light on the module popping up, so clearly it is receiving a signal from the actual stroke, but again, no sound comes out of it. I'm using Ableton Live to play some nicer drum samples. FYI, I do get different velocities while playing normally. I'm really struggling to find a solution!! Keep up the great videos!!
@randyroderick
6 жыл бұрын
I saw that you were using the R-Drums center mount trig on your snare, I was wondering what material would you say the decoupler is made of? Is it like more of a mouse pad feel or like a yoga block? I love all of Rdrums designs but I don't want to pay for the overseas shipping so I'm trying to recreate them as close as possible. Thanks!
@ilanbabi3109
5 жыл бұрын
What the diffrence between Roland HT 30 dual triger and HT single
@ItsMeScareCro
2 жыл бұрын
I've got a set of DDrums that have the triggers built into the shell and it runs out using a XLR. I bought them from a friend and he basically turned it into an electronic kit, stuffed the shells, put a couple layers of mesh heads on them. When I bought them, I put acoustic heads back on them, but the triggers got messed up and need to be replaced. He made the inside mounts where the trigger hits the center of the drum, he did a killer job on that, pretty much like the one you showed. Any suggestion on what type/size of piezo I should use? And as far as the foam for the trigger, think the felt from a cymbal would work?
@zakk2bwylde
2 жыл бұрын
Hey Justin!! Great video. Quick question for ya. What brand of module has the lowest latency? Looking to pickup a new module possibly a roland td-27 or alesis strike. What's your thoughts? Cheers
@naxgaubert7668
6 жыл бұрын
thanks! you have an awesome channel Justin :) One question, are the second and third type of triggers compatible with cross stick hits? I have a td25 module and i want to switch to a bigger snare (but the roland ones are too expensive) thanks again!! have a nice day
@nodevit9950
4 жыл бұрын
Great channel, great information. Did you buy your Jobeky triggers from the official UK site? Shipping cost is a bit steep. Did you find another source in north America?
@nodevit9950
2 жыл бұрын
I ended up buying from uk. No other place to buy jobeky. It's a mom and pop type operation from what I can tell. Bought 3 side triggers and one bar trigger. Shipping was bad, but could not find triggers in Canada
@solounaopinion
4 жыл бұрын
Does the td 17 module work to place the triggers, that is, if I want to buy 5 triggers and also roland cymbals will it work for me?
@yanxi02
4 жыл бұрын
may i know does Yamaha EAD10 can apply on mesh drum head?
@lydkontoret2320
6 жыл бұрын
An idea for getting hot-spot free, positional triggering - please read on and comment. Note: I haven't yet tried out whether the following will work. I recently exchanged my Yamaha E-kit (silicone pads) with a Roland kit (PD-108/PD-128). Being accustomed to the Yamaha pads that have no hot-spotting whatsoever, I find the hot-spotting of the Roland pads extremely annoying (hey, that's NOT what I played!). I'm now in the proces of exchanging the Roland pads with some other mesh-head pad, that utilizes side-mounted triggers (or possible I will exhange center-mounted triggers with side-mounted). Without center-mounted triggers, we loose the positional sensing - and that got me thinking - why can't we have both? Why not use the center-mounted trigger for positional data only, and use the side-mounted trigger for velocity? The module would of course have to accomodate this - which, as far as I know, no one does. That got me thinking - this ought to be possible with some tampering and creative set-up of module(s) and a computer. The concept is as follows. If we have a pad with a center-mounted trigger and we add a side-mounted trigger (like Triggera Intrigg), we can use the velocity sensing of the side-trigger and the positional-data only from the center-trigger. For center-mounted triggers, the Roland modules generates MIDI CC for position along with note/velocity for head/rim. From the side-trigger we get hot-spot free head/rim note/velocity. By connection our module to a computer via MIDI/USB and setting local to off (turning of the connection from the trigger signals to the internal sound engine), we basically use the module as a way of genrating MIDI data from our triggers. On our computer, we need software to modify and send back the MIDI data to the drum module, which then will act as our sound engine. In the software we take the positional midi-controller data from the center-trigger and ditch the note/velocity it is paired with. We then take the note/velocity value from the side-mounted trigger, pair it with the controller data and send it back to our Roland module. Now we have hot-spot free, positional triggering from our pad! I got to try this out...
@johndef5075
6 жыл бұрын
Hot spotting is annoying. I switched to a rt30 on a custom 12" tom i converted from a pd-120 Roland pad because of it.
@gustavo-toledo
5 жыл бұрын
Hey Justin, Thanks for the info, super helpful as usual. I’m having issues with my TD-9 + RT-30HR with 14in Roland powerply head on a Yamaha acoustic snare. It works well during the setup/testing phase but when I’m actually playing it some of the snare hits don’t make any sounds (I’m guessing those are then harder hits). I’ve changed settings quite a lot of times but still can’t figure out what’s wrong. Head is tight (not necessarily tuned but taut all across. Any thoughts? Thanks
@stickybandit2346
5 жыл бұрын
What brand is that side internal mount that you show?
@peterschmidt1936
5 жыл бұрын
Hey Justin, if price wasn’t an issue, which trigger system would you go with. You mentioned at one point that you’re leaning towards using the internal side mounted. Does that still hold true?
@65Drums
5 жыл бұрын
I prefer center mounted most of the time now if the trigger is well built.
@billjacobs5666
2 жыл бұрын
What’s your knowledge or opinion about Extreme Drum Triggers?
@zackedrums7224
4 жыл бұрын
Are the triggers inside the drums dual zone with the rim???
@notnerd3
4 жыл бұрын
You can buy some that work dual zone. After a little bit of messing, you shouldn't get any triggering issues.
@gatlinproduction
4 жыл бұрын
Need some advice. What advantage do I have if I already own the Roland TD50K Sound module? Can I just buy tiggers for my acoustic drums and will that work for recording into my DAW
@notnerd3
4 жыл бұрын
You can use an interface to capture sound from your drum module and put that in your DAW. This will be cheaper than using a VST and if your sounds are already good it is probably a decent option. The main downside is that you won't be able to adjust any of the sounds and EQ for individual drums after they have been recorded so if you decide your snare sounds a little bit too boxy, you are screwed because you haven't got a recording of just the snare, just left and right channels.
@fariooficial5527
2 жыл бұрын
cant see the trigger models, because you show it very fast and with lot of movement. Thanks
@byroncapalot3376
6 жыл бұрын
1st love your videos keep it up
@stevenlumbert5441
6 жыл бұрын
what do you recommend for a throne ?
@65Drums
6 жыл бұрын
Roc N Soc and PDP
@CaratGlobbins
5 жыл бұрын
can you add your own sounds to a drum module?
@airbean1947
5 жыл бұрын
CaratGlobbins yes, most drum modules are very easy to add your own sounds to, you can usually just hook your computer up and import the sound in. I’m fairly sure Justin has a video on this, just search up importing sounds to drum modules or something.
@CaratGlobbins
5 жыл бұрын
@@airbean1947 thank you! im gonna give the roland tm-1 a shot on my kick and snare. I already got a good acoustic sound on it but hopefully adding these drum samples that i found will give it more punch :)
@NicleT
3 жыл бұрын
Where’s the ddrum example?
@Flamethatburns
5 жыл бұрын
The wiring needs to be plugged in and out using the plug tips, never yank then out by the wiring. It only takes a second to destroy the connection and it will take a half hour to resolder it. To help make it sturdy, slide heat shrink over the ends, and heat it with a heat gun, hair dryer, or carefully with a cigarette lighter. Another heat shrink is called Shrink and Repair, and can be wrapped around the wire. Check out the video: kzitem.info/news/bejne/qJ1ttKyPm6xqZpw
@paulbonfiglio8661
6 жыл бұрын
How about Magnatrack triggers?
@65Drums
6 жыл бұрын
They aren't very good. Bought some and then returned them.
@paulbonfiglio8661
6 жыл бұрын
65 Drums interesting thanks for your input
@sameinsohn6187
5 жыл бұрын
I used them and am a big fan. Very sensitive. I’ve tried all sorts bought and built myself and magnatrack is by far the most responsive and easiest to dial in. Did you see this video of magnatrack testing their triggers? kzitem.info/news/bejne/xJ6kzZqQhnaWmKg I don’t know why you would say they aren’t very good. Is there a chance that JG is you? Did you ask tech support to help? I’m honestly just a concerned fan of magnatrack and don’t understand why someone seems to dislike them.
@dpression5882
2 жыл бұрын
i have the Yamaha dtx 400k drum module and its stupid it doesn't have a screen and barely any customization like you were talking about and i still don't know how to FUCKING RECORD IT WITH COMPUTER HELP
@matthiasrambally1899
6 жыл бұрын
Hehe
@emilienfalcimaigne8065
6 жыл бұрын
Fiiiiiiiiiiiiiiiirst
@immagood2
5 жыл бұрын
R Drums wsebsite is the worst
@dukesworld4111
6 жыл бұрын
I just wanted to thank you for all the great, informative videos. I'm currently in the process of converting my acoustic set to electronic (because I like being on the good side of my neighbors), and both your channel and Vdrum Tips have been great places for all the info I didn't know. I would have never even attempted the conversion until I started watching all the great tips and explanations on here. Keep up the awesome work!
@terryreilley
4 жыл бұрын
Just curious - who manufactures the expensive center mount at 2:17?
@SuperReelmccoy
7 ай бұрын
I have a Simmons SDMP1 That won't trigger in the KICk or HH inputs with most triggers but some with a half Click. What do I need to do to use these. It has two more inputs for triggers which work with my kick and HH but I would like to use them for ride and crash cymbals.
@famisheddendon
9 ай бұрын
why do we have to sit here and pretend they arent just glorified piezo pickups in some weird encasing? this should never be worth anything over $50. Just buy some piezos and ship out these parts printed with an STL file. Way cheaper. Even cheaper if you have your own 3d printer. Edrums are such a racket dude. Simple ass Arduino technology.
@jas_bataille
2 жыл бұрын
Yep... Sunrise sensors aren't even triggers at this point. I wonder if there's anything on the civilian market that is this good at sensing vibrations, and I doubt it... it can sense position, pressure, the kind of material you hit (head, drum stick, drum shell, rim, and combinations, including rimshots from the center and the side) and has 40 positions on the head and 10 different types of strikes (I didn't know there was that many way of striking a drum...?!)... the only thing is, they're 700 bucks. Per sensor. That's without the drums, without the software, without the laptop to run the software - which needs to be pretty strong - without the mesh heads... God. Damn. We're taking, what, 1500$ per drum... with no cymbals - and no modules for the cymbals. That quickly add-up to a 20K drum set, so... no.
@RcKDrUmm3R
Жыл бұрын
I have to say, after years of tinkering the best natural triggering results come from an internal side mounted trigger, as long as it is paired with a decent drum module. The center mounted triggers and the hot spotting was too annoying for me, especially when comparing to how it is playing on a regular acoustic head.
@itz_vortex7341
5 жыл бұрын
Justin, can these triggers work on regular drum heads? like not mesh.
@65Drums
5 жыл бұрын
Yes, but triggers will always be a bit more accurate on mesh heads because they don't vibrate as much as mylar heads
@itz_vortex7341
5 жыл бұрын
@@65Drums nicee! thanks for the feedback justin
@dillanhawkins6501
6 жыл бұрын
Great video Justin, I’m an no longer confused about all of the electronic stump in these drums😂
@jackmarch9698
4 жыл бұрын
Very informative video Justin. Do you think the 'hot-spotting" issue with a centre-mounted trigger would be resolved by positioning it offset - somewhere mid-way between the centre and that part of the rim furthest from the drummer? That area of the head is unlikely to get a direct hit and the resultant spike.
@justus490
5 жыл бұрын
Literally got on craigslist and found the only alesis io anywhere in the city right after watching your video telling me to buy it. Thanks!!
@adriansmith3008
5 ай бұрын
Do you know if these triggers work with an accoustic head with a mute pad on top like an evans sound off?? Or does it not vibrate enough to trigger
@simonep2291
4 жыл бұрын
I've recently discovered your channel, you're great man!
@TenaciousKevoMusic
3 жыл бұрын
I am your 1,100 like!
@cankaya4339
5 жыл бұрын
Thanks for the video helped a lot !
@mrjenybean
5 жыл бұрын
Made my own centre mount trigger (not a drummer but more a techie) on a Roland TD-11 and tbh my homemade trigger on an old snare with a mesh head works better than a roland pad and it cost me about £10 in parts to do the conversion / make...
@zachdawson7915
6 жыл бұрын
Thanks I've been needing this video for so long
@Ronnytrials
3 жыл бұрын
Center internal trigger cant be moved a little bit more to the side? To avoid hot spot?
@johndef5075
Жыл бұрын
If you're handy triggers are fairly easy to assemble. I made a center mount with 2 slotted 90 degree brackets and a shelf bracket I had laying around. Got a Pintech trigger with 1/4 jack for $18 on Amazon. Dirt cheap floor tom and works great even with a 1 ply Silentstroke head though I would recommend 2 ply if possible. Wood crossbars would work too and be easy to make.
@MrCinek80
3 жыл бұрын
Hi Justin! Do you have any experience with the Roland RT-30HR trigger on the Alesis Strike module? I have just converted my Yamaha Stage Custom kit and even I used a dual zone trigger for the snare when I hit the rim I can’t get a nice and clean cross stick sound. It sounds the same as the snare head centre. I set up correct X stick sound in the snare rim voice but for sure something is wrong. Can you advice how to fix this problem???
@michaelmittelsdorf
4 жыл бұрын
Below please find links to inexpensive piezo contact pickups (triggers) with instrument cable connectors for your DIY acoustic to electric percussion projects. I can not vouch for the durability, impedance, performance or connectivity of any of these products. But for those of you who are purchasing (like myself) or who already own an electronic drum module these pickups (triggers) are already wired to connect to the single zone trigger inputs of many of the drum modules available today! Find the one(s) that best apply to your project! Enjoy! Thanks Justin for all the information and inspiration!
@jpcuellar2597
4 жыл бұрын
Awesome video, but I have a maybe odd question. I just bought a Roland SPD-SX with a RT-30K kick trigger. If I wanted to practice using that setup, is there a way I can set up the kick trigger on something (quieter) other than my bass drum?
@nielswil
5 жыл бұрын
One question about the "stealth" trigger, when it's connected on the inside of the drum, doesn't it react when you hit the shell or the rim?
@4bladesofglory
3 жыл бұрын
Depends on sensitivity settings. If set correctly to contact only inside head this would be fine.
@bobbyjones2112
3 жыл бұрын
I love your reviews I’m going to convert my acoustics! I just have one suggestion that you update your backdrop. The paneling reminds me of my parents old house in 1968. I’ve been looks nice is just no modern. So I’m not criticizing it I’m just suggesting something cooler..lol
@mrkevelev
5 жыл бұрын
I have a 20 inch kick drum with a Pintech dual mesh head. I've had difficulty getting consistent triggers. I tried the internal cone-type trigger and then bought a Roland RT-30K rim mount trigger made for kick drums, but that is difficult to mount due to the rounded edge of the kick drum. Does a tighter mesh usually mean better trigger response? I know the problem is with the trigger mounting because if I hit the actual trigger case, I hear a sound every time. I find I have to stomp on the pedal very hard to get a trigger, something I don't want to do. I'm thinking about getting something else, and I like the KD-A22 that you talked about, but is there one for a 20 inch drum? What other options do I have?
@jerejones2798
4 жыл бұрын
There are non-permanent "contact gels" (used with medical "T.E.N.S. units) for attaching therapeutic contact pads to skin. Appling this gel to the contact sensor greatly improves transference efficiency between trigger and head/shell.
@olliebug1
3 жыл бұрын
Hey Justin and everyone. Have you used Extreme Drums drum triggers? I found them online and talked to Marshall who is the owner I believe. Very nice guy. Just wanted to see if anyone has tried them out and how good they are. Thanks! Josh
Пікірлер: 171