My favorite trick for urban terrain and dioramas is printed materials. Producing leaflets, newspaper, ballad-sellers' sheets, etc (as appropriate for the genre and time period) on just a regular laser printer, and then carefully stain them with thin washes to make them look appropriate to the scale. Things like posters can even be colored in this way. Graffiti is another nice way to get some of that lived-in feel for a structure, especially for Necromunda, or Orks.
@VinceVenturella
2 жыл бұрын
Absolutely!
@TheEnd
2 жыл бұрын
This project genuinely looked fun and I’m walking away feeling relaxed and inspired
@VinceVenturella
2 жыл бұрын
Awesome
@Zable24
2 жыл бұрын
Ive been having anxiety about painting everything, even terrain. Good to think of it as more of a relaxing proccess
@giantorres3352
2 жыл бұрын
I took my unpainted buildings out the shelf. I then saw this video was uploaded. Perfect timing. Awesome video. Gracias
@VinceVenturella
2 жыл бұрын
Excellent
@KingKooba22
2 жыл бұрын
with stripes, you can also pre-spray a couple of layers of AK's chipping medium, then spray your colored stripe over top, and then lightly reactivate the chipping fluid with a wet brush and get a very organic paint flaking effect so the stripe is a little more grim darky
@VinceVenturella
2 жыл бұрын
That's a great idea!
@Steve_Keen
2 жыл бұрын
I have a whole lot of terrain for Necromunda to paint so I'm sure I'll be coming back to this video many times. Thanks Vince.
@VinceVenturella
2 жыл бұрын
Happy to help.
@alexanderz8052
2 жыл бұрын
I found that spongins a light metal colour onto a darker metal that was stained with a grime paint gives the metal a nice dinged look. Line it collided with a ton of stuff and got chipped.
@VinceVenturella
2 жыл бұрын
Good tip!
@uriance88
2 жыл бұрын
Contrast paints for streaks is something I discovered (hooray for experimentation!) last week - it might be one of their best 'unintended extra uses'
@VinceVenturella
2 жыл бұрын
Absolutely. :)
@zpetriw
Жыл бұрын
Great tips! This gives me a good starting point for some Battletech terrain I've been itching to paint.
@flumpet38
2 жыл бұрын
Great tips, and you perfectly encapsulated why I have so much fun painting terrain. It's just a wonderful, low-stakes bit of pure FUN painting.
@VinceVenturella
2 жыл бұрын
Glad it was helpful!
@sebastiandodson189
2 жыл бұрын
Terrain is so much fun. Simple or complex, it's just relaxing and so low stress compared to miniature painting. And you can get so much done in so little time it's really rewarding.
@VinceVenturella
2 жыл бұрын
Absolutely.
@TetsugakuSan
2 жыл бұрын
Airbrush that streaking grime on neat, saves a lot of time, works super well
@VinceVenturella
2 жыл бұрын
Yep, I do that in some former videos, I just wanted to keep this one more simple.
@ericdeutsch6707
2 жыл бұрын
Also by using our friend the sponge you can do all sorts of really cool camouflage techniques through sponging you do not need an airbrush
@VinceVenturella
2 жыл бұрын
Great tool for sure.
@gregarious_one
2 жыл бұрын
Thank you for your jump into terrain every once in a while; you always have great tips no matter whether beast or building!
@VinceVenturella
2 жыл бұрын
Thanks!
@josephk8859
2 жыл бұрын
Vince, you are the new Bob Ross. I love watching your vids in the mornings. Great pacing and fun tips! Great stuff - thanks for sharing this!
@Jackaljkljkl
2 жыл бұрын
Knocking over a pot of Nuln Oil is now just a happy accident.
@VinceVenturella
2 жыл бұрын
Glad you like them! That is high praise indeed. :)
@HexTableTop
Жыл бұрын
Awesome! Love painting terrain and weathering to within an inch of its life! Going to apply some of these ideas to my MAD hab blocks I am about to paint! Many thanks for the video! Chris@HeX.
@kennedygauger4680
Жыл бұрын
Verdigris on copper is a great detail. Thanks!
@VinceVenturella
Жыл бұрын
You bet!
@buzzedaldrin7316
2 жыл бұрын
Another cool trick you can use alongside this suite of techniques is to apply some splattering with your airbrush. Pull back and forward on the trigger without pushing down to build up paint on the tip and then press down on the trigger to dislodge the paint. If you don't have an airbrush you can also get a good result by flicking the tip of an old brush with a toothpick.
@VinceVenturella
2 жыл бұрын
Or both together as I often do - put the paint on the end of the brush in a thick way, then blow with just air from the airbrush through the hairy brush! :)
@hulejul9748
2 жыл бұрын
loving the grimdark. hope to see you grim some models up too. 40k Knights are really fun to grim up with grime and rust to give them a nightmarish look oh and one thing I did on my buildings for 40k was to add bloodspatter on the walls. makes it look like people have been shot or fought around there. really makes the building come alive and give it character!
@VinceVenturella
2 жыл бұрын
Yep, the blood spatter is another good tip for sure. :)
@ruleofkoolwargaming4926
2 жыл бұрын
This is perfect timing for painting my Necromunda ash wastes terrain… I wanted to do white terrain for a mars theme, but also to use on any tabletop I happen to create
@VinceVenturella
2 жыл бұрын
Excellent.
@raindog8684
2 жыл бұрын
This is the most helpful video I have watched this week!
@OldManRogers
2 жыл бұрын
Got to agree about terrain being relaxing. I find that because it's not for a specific army or anything that it's ok to experiment and try new things. I don't paint busts so I guess they would be a similar feeling. :-)
@VinceVenturella
2 жыл бұрын
Absolutely.
@joshfreeman3264
2 жыл бұрын
5:40 Also you can use the Blue Paper towels, they're shop towels that dont leave behind any fibers 👌
@VinceVenturella
2 жыл бұрын
It's a good tip!
@jameskyle7943
2 жыл бұрын
Fully inspired to build and paint my Necromunda terrain kit now- thanks Vince!
@VinceVenturella
2 жыл бұрын
Awesome!
@Erikjust
2 жыл бұрын
About rust Grimdark Compendium have recently recommended a painting brand called Dirty Down. From what i can see, he was quite impressed with their paint called Rust Effect. From the looks of it its seems quite versatile in creating different shades of rust, the only downside he mentioned is that it dries very quickly and as such isn´t that well suited for a wet pallet.
@guerrillavanilla
2 жыл бұрын
DD Rust is great, just use it out of the pot with an old brush and lay it on
@VinceVenturella
2 жыл бұрын
I plan to give it a try sometime soon. :)
@niallcampbell
Жыл бұрын
I picked up the Nachmund set last week - this will come in very useful!!
@VinceVenturella
Жыл бұрын
Wonderful!
@r.wipprecht6387
4 ай бұрын
Just got my Killzone Fronteris Box and will try to replicate some of the methods. Thank you very much! Is that Base color building darker to lighter Grey's? It Looks almost Sand/bone, but that is from the grime, tinting it, right?
@LordChumbley
2 жыл бұрын
Gonna try these techniques on next project. Thanks for ideas.
@VinceVenturella
2 жыл бұрын
Go for it!
@ThePingouin2ter
2 жыл бұрын
It really feels like the ultimate grimdark terrain tutorial, everything is there ! That red type works really well too ! Quick one, what is the black goo (which looks quite alien) that you use in addition to the masking tape?
@sebastiangurgul6712
2 жыл бұрын
Believe its AK masking putty, pretty similar to the children’s toy Silly Putty.
@ThePingouin2ter
2 жыл бұрын
@@sebastiangurgul6712 Thanks, hadnt come across it.
@VinceVenturella
2 жыл бұрын
Yep, AK masking putty
@drzephy
2 жыл бұрын
I'm currently doing some terrain for RiH/AoS and you're right. It's so much more zen.
@VinceVenturella
2 жыл бұрын
Absolutely.
@blacktemplar667
2 жыл бұрын
To get a mottled, chipped/flaked off look to metal surfaces I like to cover them in enamel wash like AK streaking grime, rust streaks or engine grime. Then start wiping away a bit with white spirit on a q tip, leaving the area rather wet in a mix of spirit and diluted wash. While still wet I then immediately come back with an old torn n worn brush loaded with a slightly brighter acrylic metal colour than the original one. Stab it randomly. Leaves a nice natural texture as if sth had eaten away at the metal & its patina.
@VinceVenturella
2 жыл бұрын
Love this idea!
@blacktemplar667
2 жыл бұрын
@@VinceVenturella 😊 I discovered this by chance while weathering a few necrons. The enamel wash and white spirit mix on the mini hadn't dried but nonetheless I gave adding scratches with acrylics a try. Turned out the enamel and the water based acrylic colour not only kept themselves somewhat apart (as one would expect) but also created a cool looking pattern. Depending on how much spirit/enamel is present in a spot it needs quite a bit of hitting it with the brush or loading the brush tips rather heavily with acrylic to make it stick. Slightly dipped the bristles of the brush in the acrylic and only whiped them off a little before stabbing if they had rather large blobs of paint on them that would be too uncontrollable.
@madMARTYNmarsh1981
2 жыл бұрын
That part where you're spraying white and then all of a sudden colour and black slime stuff appeared, I thought I was hallucinating 😂
@VinceVenturella
2 жыл бұрын
You were not, I had a little grease on there that I had to clean up. :)
@grimoirworkshop6623
Жыл бұрын
Music in the interlude scared me 😊
@jonbauml225
2 жыл бұрын
Love it when you paint terrain
@VinceVenturella
2 жыл бұрын
It's always fun and relaxing. :)
@Matcapoeira86
2 жыл бұрын
Damnit Vince. I wasn't going to get this kit and now you made me get it...
@VinceVenturella
2 жыл бұрын
My apologies. ;)
@variancehammer246
2 жыл бұрын
I've been really enjoying Starship Wash instead of Streaking Grime for a proper "Everything is just a little bit dirty" wash.
@VinceVenturella
2 жыл бұрын
I agree, I was actually out of that and so used normal Streaking Grime. ;)
@stargazingkiwi
2 жыл бұрын
I think it would be cool to have a terrain category in Golden Demon
@VinceVenturella
2 жыл бұрын
That would be excellent.
@mattcappelli5822
2 жыл бұрын
Really great tips in this. Nice and easy to follow. Just need to practice! Thanks for the useful info as always!
@VinceVenturella
2 жыл бұрын
Thanks!
@brushhammerdice4438
Жыл бұрын
The results and the guide are amazing! Did you paint the whole terrain set in this scheme? If yes, where can i see pics of that? Appreciate
@VinceVenturella
Жыл бұрын
Glad you enjoyed it. I didn't get to paint the rest of the terrain yet, but I plan to in this same scheme. I always share everything on my socials. :)
@brushhammerdice4438
Жыл бұрын
@@VinceVenturella cool thing, that you answer every question comment. Appreciate
@adamduncombe594
2 жыл бұрын
Amazing. Always superb content, thanks so much for taking the time to share and produce.
@VinceVenturella
2 жыл бұрын
Happy to help.
@gorrbaczow
Жыл бұрын
Really good, informative video. Thanks so much!
@DoktorTechnometer
2 жыл бұрын
Those AK materials look great - was a great eye opener/tip. So I bought a mixed pack of those and then the Battlezone Fronteris. You should get commission :)
@VinceVenturella
2 жыл бұрын
Sadly, no commision for me, but glad to be helpful. :)
@SvenEnterlein
2 жыл бұрын
Another invaluable bag of trick and tips. Basing and terrain can be such a stress relief and change of pace that I always look forward to. Copper is one of my favorite metals for minis and I'm wondering which color you used for the tanks. They look spectacular!
@VinceVenturella
2 жыл бұрын
Just Vallejo Metal Color Copper with a little copper pigment from Green Stuff World mixed in.
@lewwebb992
2 жыл бұрын
Good stuff. I'm inspired. and I gotta get some of that streaky grime stuff...
@VinceVenturella
2 жыл бұрын
Awesome
@gretchinpots2663
2 жыл бұрын
A good rule for keeping things random is the mathematical notion that "Randomness is lumpy".
@VinceVenturella
2 жыл бұрын
Absolutely!
@cmckinley22272
2 жыл бұрын
Vince, you are my hobby hero!
@VinceVenturella
2 жыл бұрын
Thanks!
@andrewobrigewitsh
2 жыл бұрын
Would love to see Kill Team and Warcry terrain being done.
@VinceVenturella
2 жыл бұрын
I am sure there will be more terrain in teh future. :)
@fdehands7494
3 ай бұрын
Great video
@VinceVenturella
3 ай бұрын
Thanks!
@Gnabbla
Жыл бұрын
Best Video I've seen so far. Watched it several times. thanks a lot man. I'd just like to know how long do you usually wait after the enamel wash has been applied before wiping it off?
@VinceVenturella
Жыл бұрын
15-20 minutes.
@kevinhayes517
2 жыл бұрын
Wonderful tutorial….thanks very much for the excellent tips and techniques!
@VinceVenturella
2 жыл бұрын
Glad it was helpful!
@ellisowendaniel
2 жыл бұрын
This week I found an old terrain video of yours and saw that I had already watched it and commented a year ago saying I was starting a terrain project. I’ve still not put any paint on that project but hope I can soon after watching this. I just need to finish Sanguinius first 😩
@VinceVenturella
2 жыл бұрын
No time like the present! :)
@ellisowendaniel
2 жыл бұрын
@@VinceVenturella is that Vallejo Metal Color for the copper? I’ve been meaning to invest in some of the range
@VinceVenturella
2 жыл бұрын
@@ellisowendaniel yes indeed
@Basil_Ghothickovitch
2 жыл бұрын
I'm so happy with today's hot news about the return of Squats (now - Leagues of Votann)! This means that the Warhammer 40,000 will live and will not become an addition to the Horse Heresy, as I feared. Also significant retcon of 40k lore is expected in the future, I'm always happy about it. I want more of the same for Warhammer Age of Sigmar too!
@VinceVenturella
2 жыл бұрын
It was a big announcement for sure.
@matthewbull3688
2 жыл бұрын
Tip #3 - Did you varnish or not? I suspect you didn't? Q1: What terrain piece is this / where is it from? Q2: Do you plan on showing your version of painting Into the Dark terrain?
@VinceVenturella
2 жыл бұрын
I did not varnish. 1. From the recent 40k terrain box set. 2. Didn’t get that box, so I am not sure yet. Uncle Adam did a nice version.
@alvaroaugustomeridio
7 ай бұрын
What a legend!
@jeremymorse2087
8 ай бұрын
This is great but it would be very helpful to have a full paints list used.
@VinceVenturella
8 ай бұрын
Noted!
@dennisfoulds3941
2 жыл бұрын
You got robbed of your golden demon. Your tighten should’ve won something!
@VinceVenturella
2 жыл бұрын
Such is life, next time we'll get em. :)
@rockstrongo831
2 жыл бұрын
Ever want to know how a moonlight still will look in 40k? Watch the video. Great video btw.
@VinceVenturella
2 жыл бұрын
Thanks!
@mooseoperator7288
2 жыл бұрын
Amazing video, you must show us a full table!
@VinceVenturella
2 жыл бұрын
Maybe one day! (When I have the time to paint more of this wonderful terrain). :)
@roelandpellis3679
2 жыл бұрын
I love it! Thanks for the great tips.
@VinceVenturella
2 жыл бұрын
Glad it was helpful!
@bricemorales5616
4 ай бұрын
Amazing !
@VinceVenturella
4 ай бұрын
Thanks!
@paulweller5056
2 жыл бұрын
I've used actual rust on my models, like from the old brillo pad that you, yes you, have under your sink right now. Use it like pigment, looked just like rust. Because it was.
@VinceVenturella
2 жыл бұрын
That's an awesome idea.
@clawhammr666
2 жыл бұрын
Top notch work, thanks a lot
@VinceVenturella
2 жыл бұрын
Thanks!
@markrichard3364
Жыл бұрын
Awesome video! But you never said whether or not you applied a coat of varnish before you applied the streaking grime 🤔
@VinceVenturella
Жыл бұрын
I did varnish before, it's not strictly necessary, but it can make it easier.
@markrichard3364
Жыл бұрын
@@VinceVenturella Ok awesome, thanks for the response.
@crustythewanksock2413
2 жыл бұрын
Awesomeness!! 👏
@VinceVenturella
2 жыл бұрын
Thank you! 😁
@crustythewanksock2413
2 жыл бұрын
@@VinceVenturella You’re welcome. Thank you for inspiring me to be confident enough to paint all my scenery in anything other than just grim dark rust 🤪
@madMARTYNmarsh1981
2 жыл бұрын
Your dog is going to look for his toy sock and then see this video, you know he/she is going to urinate in your shoe for revenge!
@VinceVenturella
2 жыл бұрын
Fortunately, they have many socks. :)
@Magicwillnz
2 жыл бұрын
You can zenithal terrain. Just dump a can of white paint over it and you're good.
@VinceVenturella
2 жыл бұрын
There you go, you also get the texture ;)
@midnightrambler4468
2 жыл бұрын
Amazing, thanks for the tutorial :)
@VinceVenturella
2 жыл бұрын
You're welcome!
@Bobaaja
2 жыл бұрын
awesome video thank you.
@VinceVenturella
2 жыл бұрын
Thanks!
@markgnepper5636
2 жыл бұрын
Great stuff friend 👏 👍
@VinceVenturella
2 жыл бұрын
Thanks!
@SuperDuperHappyTime
2 жыл бұрын
On tip #7, get the piece wet and then let it dry naturally. The places where it is still wet are those places
@VinceVenturella
2 жыл бұрын
It's a great tip!
@panduran2
2 жыл бұрын
Great video! Any thoughts on applying the streaking grime via the airbrush vs the traditional brush?
@VinceVenturella
2 жыл бұрын
Both work just fine, I've airbrushed it in previous videos, I just wanted to keep this simple.
@AlexAyliffe
2 жыл бұрын
Greta video vince. Do you use a typical neoprene fat mat for your table or do you build your own tables?
@VinceVenturella
2 жыл бұрын
Just a typical matte, though I have a wide variance of terrain.
@davidlagunafernandez6476
2 жыл бұрын
Espectacular job 👍👍
@VinceVenturella
2 жыл бұрын
Thanks!
@jerradrashleigh8864
Жыл бұрын
Could have mentioned that the streaking from would strip spray paint
@VinceVenturella
Жыл бұрын
I've never had that happen. Did you varnish the model before the grime (not strictly necesary, but can help prevent that).
@jerradrashleigh8864
Жыл бұрын
@@VinceVenturella I tried it again with with AK Matt varnish and it still strip it. It doesn't affect the black primer I used underneath, it only affects the white I used on top. I just airbrushed it instead and it worked fine
@gwfranklin1
Жыл бұрын
This is great!
@vascoaching8590
2 жыл бұрын
very nice video
@VinceVenturella
2 жыл бұрын
Thanks
@niallcampbell
9 ай бұрын
Vince, that looked like an awful lot of AK grime! Oil wash a little cheaper to achieve a similar effect? Can you airbrush streaking grime etc or more at risk of ruining the equipment?
@VinceVenturella
9 ай бұрын
It was a decent amount but yes, oil wash can do the same thing. You can certainly airbrush it, it’s no issue, you just have to use white spirits to clean the airbrush.
@jonathanalston1552
2 жыл бұрын
This made these buildings so much more appealing as a product 🤣 Like almost everything GW produces it often looks better to me once someone not GW has painted it.....
@VinceVenturella
2 жыл бұрын
There you go. :)
@frederickgleicher1385
2 жыл бұрын
Vince: This looks cool. Which piece of terrain is this ? Also what do you recommend about for scratch built terrain, do the techniques change, or would you say they are the same ?
@VinceVenturella
2 жыл бұрын
It's from the new Nachmund set. Same techniques for scratch building.
@kostek83
Жыл бұрын
Great job! I would like to ask if you add any varnish at the end to seal everything?
@VinceVenturella
Жыл бұрын
I varnished before the metallics. Not after that.
@toast0011
Жыл бұрын
whenever i try to use abit of mineral spirits on oil washes it seems to take everything off, even the primer. I have used rattle can primers and army painter black primer.
@VinceVenturella
Жыл бұрын
It shouldn't mineral spirits don't interact with acryllic paints in any way. Are you wiping with the brush and applying pressure, its very wet and making acryllic paint wet can remove it under pressure, you want to basically tap at the miniature or wipe very lightly.
@Rafalobo1
2 жыл бұрын
Great video. I'd like to know why you used contrast paint for streaks vs. Using streaking grim?
@VinceVenturella
2 жыл бұрын
More control over thin streaks. Streaking Grime itself is more for stains and or streaked areas as opposed to individual running drips.
@dan_hahn
Жыл бұрын
this is very nice! Any chance you could drop the colors used if we wanted to follow the visuals on this?
@VinceVenturella
Жыл бұрын
The colors are fairly arbitrary, but basically the zenithal is just standard white primer, the color over the top was an ivory, the red was burnt red and then the metals were vallejo metal color. Then you have streaking grime (standard) and some rhinox hide and black for the weathering.
@dan_hahn
Жыл бұрын
@@VinceVenturella thank you very much !
@juliosaramago
2 жыл бұрын
Awesome as usual ;)
@VinceVenturella
2 жыл бұрын
Thanks!
@paulausten5786
2 жыл бұрын
Could you do a fantasy one too. Great vid as usual Vince.
@VinceVenturella
2 жыл бұрын
Great suggestion! On it.
@lolaldanee2743
2 жыл бұрын
Is this the result of that weathered white truck that you saw on your way to a -con?
@VinceVenturella
2 жыл бұрын
No, this was done in advance of that. :)
@jakessofa8187
2 жыл бұрын
Great work Vince, its not hard to envision these techniques going straight onto a mini as well. How do you find pigment washes? I tend to use pigments by adding water, then when they dry you just brush over them, tends to control the placement a little easier
@VinceVenturella
2 жыл бұрын
Yep, pigment washes are another great technique, really helps get the pigment down in those deep crevices for that great rusty look.
@blacktemplar667
2 жыл бұрын
Pigments or oil colours with a mix of isopropyl and water also work great for creating stains / marks that look like residue left behind by dried liquids, e.g. as if there once was a waterline or a spill that dried. If I remember correctly the mix I tried on a terrain piece some time ago almost looked like paint that's diluted just to the point of breaking down.
@jakessofa8187
2 жыл бұрын
@@blacktemplar667 will have to give that's a go, hadn't heard of that trick. Cheers!
@spilledpaintpot
5 ай бұрын
I recently got this terrain set and will be running it on a game mat that's snow and rock, would I want to use a light grey to tie this into the table instead of the sepia?
@VinceVenturella
5 ай бұрын
Absolutely. :)
@niallcampbell
Жыл бұрын
Quick question on your white spirit - is sansodor thinner the same? I assumed white spirit would strip the acrylics off?
@VinceVenturella
Жыл бұрын
Yes, it's the same and they won't they don't react with acryllic paint. THey are a bunch of wetness, and with acryllic paint, if you get it very wet, and then poke your brush around, you can pull up paint.
@niallcampbell
Жыл бұрын
@@VinceVenturella thank you! One more question if you don’t mind. I notice in this video you sort of stayed away from a rough drybrush of the edges. Do you feel that look wild detract from the grim dark look?
@travisellis9230
2 жыл бұрын
Tip #2 - what is that stuff you are using? I see masking tape and what appears to be some alien substance. :D
@VinceVenturella
2 жыл бұрын
So it's AK interactive Putty (basically silly putty, and yes you can use Silly Putty).
@travisellis9230
2 жыл бұрын
@@VinceVenturella Is that just because covering a large area with tape would be a lot harder?
@VinceVenturella
2 жыл бұрын
@@travisellis9230 Harder, expensive, time consuming, wasteful. :) - with this, you just lay down the putty, spray, pick it up and put it back in it;s container. I never tape unless I need the straight line like you saw here. :)
@thomasbowman3579
2 жыл бұрын
Hi Vince, i'm going to varnish models with a mix of ultra matte and satin varnish. What is a good ratio to start with? I'll play round with it a bit.
@VinceVenturella
2 жыл бұрын
I like 2 Satin to 3 Ultra Matte.
@DarrinSK
2 жыл бұрын
is there any difference between using streaking grime and just some brown/green oil wash?
@VinceVenturella
2 жыл бұрын
Yes, the streaking grime dries faster and leaves a little more patina. Both can be used for the same purpose though you’ll get slightly different effects.
@Warbringer95
2 жыл бұрын
What's the first track of music? It's so nice.
@VinceVenturella
2 жыл бұрын
Random music from YoutTube audio library. :)
@Jackaljkljkl
2 жыл бұрын
Totally unrelated, but what is the best bone-coloured ink (etc) for a top-down warm airbrush zenithial? Liquitex and FW don't seem to have such a colour in their ink ranges (the lines many people seem to use for white zenithial).
@VinceVenturella
2 жыл бұрын
I've never really seen a good bone colored ink, I just use traditional ivory paint and thin it down. Pro Acryl is a go to favorite for me.
@FognarFoehammer
2 жыл бұрын
Thanks so much for this tutorial, Vince! I just bought and assembled this terrain earlier in the week and was looking for some inspiration on how to tackle it. Quick question: I have tried to paint stripes using the method you use here with the masking tape. I have tried standard masking tape as well as painter's tape in the past and every single time when I pull up the tape it takes part of the base coat and primer with it leaving splotches of bare plastic. The paint and primer I use are both from Vallejo and were completely dry before I applied the tape. What am I doing wrong? Do I need to varnish the surface first? Any advice will be greatly appreciated.
@VinceVenturella
2 жыл бұрын
The Tamiya tape is really the best. But the real trick is to stick it to your hand first a few times and remove some of the stickiness. :)
@FognarFoehammer
2 жыл бұрын
Thanks for the info, Vince! I appreciate you taking the time to respond. I’ll pick up some of that tape.
@DasDuken
2 жыл бұрын
I'm sure it'll be a long while before it's really a "problem" if ever, but do you have any favorite substitutes for Secret Weapon's rust and rubber colors now that the company has, unfortunately, closed down? I assume since Reaper was the maker they've probably got/will get at some point a straight up hue substitute in their main lines. Thank you!
@VinceVenturella
2 жыл бұрын
Well, the browns are easier, you can use basically any browns. That rubber is going to be hard to replace.
@klobasnek
2 жыл бұрын
For the streaking grime step, is there any reason not to do that with a heavy wash of oil paints? Maybe burnt umber, black, and a tiny bit of dark green? Would any of the advice change? I've got a *lot* of Necromunda terrain to do, so going to town with tubes of oil paints is probably more cost effective than using specialty hobby paints.
@VinceVenturella
2 жыл бұрын
You could do it with oil paints instead, I just find grime easier to work with as it dries faster and can be painted over more easily. :)
@elronman
2 жыл бұрын
Was thinking, do you actually want terrain that looks poppy. Or just works as a secondary backdrop like the board itself. Last thing you'd want is your minis getting lost in the colors of your terrain. However when loads of armies I've seen are either gray or dark drab, it might contrast more by having the terrain be punchy
@elronman
2 жыл бұрын
Oh and I've considered dusting the base of the terrain the same dusty color as the board. Haven't tried it yet, but it might help blend it into the board a lot more.
@guerrillavanilla
2 жыл бұрын
grimdark schemes are desaturated by nature, so its unlikely the terrain will overshadow the models
@VinceVenturella
2 жыл бұрын
I think this is here is the right way, they are interesting and valid, but they aren't synthwave or anything so they aren't stealing attention. Interesting but not grabbing.
@tannergee
Жыл бұрын
What kind of terrain is this? It looks so fitting but I've never seen it before? Is it GW or 3rd party?
@VinceVenturella
Жыл бұрын
It's GW from the Nachmund set.
@stevegeefanplastic
2 жыл бұрын
Hi Vinve, another realy informative vid, wel done. I want to ask a question about a possible future video. I've just finnished watching your aaaaaaaacontrast paints video. Will you be making a similar video about the Army Painter version? Kind Regards Steve Gee Stay safe and stay well.
@VinceVenturella
2 жыл бұрын
Yep, need to get my hands on a set. :)
@JeanParisot
3 ай бұрын
Does agrax earthshade work as well as streaking grime?
@VinceVenturella
3 ай бұрын
Not really, because you can't really wipte it away unless you work really quickly, and then it doesn't stain as softly as this. The long working time is really the key here.
Пікірлер: 277