at idle i wont disagree it does sound like a V8 haha
@richardotero2376
Жыл бұрын
Dang if it dont sound purdy. I got a 94, was wanting to delete cat. Mine i feed all rhe snake oil i can get. Ranger 1 reports very well for a 94 w almost 200, no oil leaks.
@AFXGaming
4 жыл бұрын
Sounds like a v6 not at all like a v8, but a damn good sounding v6 none the less
@naterader305
3 жыл бұрын
Sounds like a mustang gt
@floridaheat305
2 жыл бұрын
Sounds like the jeeps 4.0
@Schnozwangler
4 жыл бұрын
Goto love those buttery smooth midwest roads
@tylerfabish5578
4 жыл бұрын
You must believe me when i say I am strengthening my skill set in my career and saving money so i can get the hell out to arizona or somewhere warmer and dryer.
@DanielRodriguez-oy6mz
4 жыл бұрын
Not in Chicago 😭
@SnoopEastwood
4 жыл бұрын
lmao
@SnoopEastwood
4 жыл бұрын
@@tylerfabish5578 Arizona is the place to go for sure
@colton7373
3 жыл бұрын
@@tylerfabish5578 central Texas
@tylerfabish5578
4 жыл бұрын
Muffler part number: 9425472 I got mine on amazon for 90 bucks. Also, I am no longer replying to comments asking how the exhaust is set up. If you can't read the slide at the start of the video, you are beyond helping. Cheers!
I have a '99 Ranger 3.0 & want to do the Mustang 3.8 headers (with an adapter, JBA headers are extremely hard to find), delete both cats & have a X pipe in its place, 2.5" piping all the way, & a Flowmaster Super 10 with a side exit 3" tip or if I had the money, I would yank out the Explorer 5.0 & put it in my ranger
@havens3345
4 жыл бұрын
Sounds like a badass V8 on idle, and a Cummins climbing the rpms. I love the way this thing sounds tho. I've always wanted to do this to a v6 to trick people when I first start it up.
@fish_R_stinky69
2 жыл бұрын
Some v6 engines make a LOT more than a v8.
@richardotero2376
Жыл бұрын
Pop the hood,tell people its a v8. 8 plug wires? Only a 4. W 8 plugs. I surprise a few so called mech. Who never seen the 2.3 v8
@KsKaylor
4 жыл бұрын
Love the sound, nice work man.
@samd7476
4 жыл бұрын
Sounds amazing. This makes me wanna get one.
@richardotero2376
Жыл бұрын
Why would u want a efing ranger? Are you kidding me? Its a mustang/truck. They are a blast, and cheap. I love a little 5 speed, fishing truck.
@samd7476
Жыл бұрын
@@richardotero2376 Because I fucking feel like it.
@jamesprice2163
10 ай бұрын
Do it their cheap and a blast and a half lol even wrenching on my broken down one is fun since it's super simple be warned though if you need a clutch fan either search a junkyard or just throw electric fans on it cause no parts store I've found in three county's carries one
@danielruiz6355
3 жыл бұрын
I have a 2.9 1989 and the sound is just amazing i love it!
@mattleonard5268
2 жыл бұрын
I cut the muffler off my 88 2.9 5 speed and it had the stock cats with stock pipe but no muffler or tailpipe and it sounded amazing! Euphoric.
@hankwalkerofficial
2 жыл бұрын
same here. I need to know this exhaust setup so I can achieve a similar sound.
@drfeastmf
2 жыл бұрын
Sounds like a v8 sort of at idle, but as soon as the rpm climbs you can tell it's a v6
@Patrick-393
Жыл бұрын
congrats on the truck. I'm Brazilian from the state of Rio Grande do Sul. here there is a lot of creaking of this model.
@sandarkovic9575
3 жыл бұрын
love that cruising sound
@5metalacid1
Жыл бұрын
I think the 3.0 Vulcans are actually great sounding V6’s, which is rare to me. I don’t think they need to try and sound like a V8 to sound good. But your setup sounds especially good on this truck.
@tylerfabish5578
Жыл бұрын
Thanks brother
@captainnug_6031
Жыл бұрын
@@tylerfabish5578 got any links for the exhaust setup, like is there any kits i can buy on ebay or something? Appreciate if you can respond, tryna do this with my 92 3.0 v6 ford ranger
@jamesprice2163
10 ай бұрын
Mine sounds rough but with a tune up I'm sure it'll clear up I love the sound of the engine but I just wish I could get it to stop fuckin tapping (I have no idea if it's lifters or anything but she has fresh oil and it's not low so probably lifters or valve tap)
@spazzin9004
8 ай бұрын
@@jamesprice2163could be an exhaust leak from the manifolds or check ur egr pipe i had a knocking noise it quieted down when it was warm tho might not be your case or it could. Also check ur sparkplugs and wires.
@tylerfabish5578
7 ай бұрын
@@captainnug_6031go to muffler shop. Have them remove the cats and put in a flowmaster muffler with the side pipes. They weld all this stuff up. They put the chrome tips on. Although id say it sounded better when i had them change it to axle dumps later in the future. I have other videos of that as well
@stevemelidis6072
4 жыл бұрын
If you want an even deeper sound go with a Flowmaster DBX muffler or hp2 muffler
@brandonbuck1696
Жыл бұрын
Yea that sounds so much better than most small engines
@joshuaallender2986
4 жыл бұрын
Honestly sounds like a beefy v6 and that is enough for this lol I love it!
@tylerfabish5578
4 жыл бұрын
yeah its awesome in person
@joshuaallender2986
4 жыл бұрын
Tyler Fabish you gotta link to this exhaust?
@tylerfabish5578
4 жыл бұрын
@@joshuaallender2986 bro its in the description. You need a flowmaster muffler, single in double out. You need an exhaust shop to remove the cats and fab up the rest of the piping. Thats all there is to it
@silkygt.v.6797
4 жыл бұрын
@@tylerfabish5578 do you have to take off the converter
@tylerfabish5578
4 жыл бұрын
@@silkygt.v.6797 yes, if you don't its not gonna sound like the video. Some shops won't cut off catalytic converters. So you may have to do it yourself and drive there. I would have a friend who is experienced working on cars handle that. If you have a 1995 or older ranger (like me, mine is 93) you won't get a check engine light.
@RBLUS_TY
3 жыл бұрын
I got a Ford 300 4.9 that I wish sounded this good.
@boodootoobie4954
3 жыл бұрын
Dude you can make the 300 sound wicked with a Good Header, X pipe running into A flowmaster 40 series or a Thrush Welded dual out to the sides with tips
@dougcampbell5149
Жыл бұрын
That really sounds good.
@rifleman9419
Ай бұрын
Nice setup man
@mattleonard5268
2 жыл бұрын
I love it. I love v6s that sound like that.
@greenman7yyy
Жыл бұрын
I'm impressed, driving one handed at the optimal 12:00 position, while shifting!! 👍👍👍
@tylerfabish5578
Жыл бұрын
Some of us are actually cool
@greenman7yyy
Жыл бұрын
@@tylerfabish5578 It is preferred method for increased control and safety ..). Great job mate!!
@jaredalexander3403
4 жыл бұрын
Sounds good
@coyote102076
4 жыл бұрын
Probly the best sounding 3.0 I have heard on You Tube. There is just something about those 3.0's that have a very unique sound that no other truck has. The 4.2L in the F150's sound very similar. The 2 4.0L's I had in my explorers I just never could get them to sound...…………….right. Like, I don't know, they all just sounded...……….wrong somehow. Everyone talks about shorty shifters, and here you went and made yours TALLER! hahahaha! Hey, I dig it! I had a extended shifter in my 'ol 1989 International Eagle. (I don't drive big trucks anymore) always thought they were col myself. lol Great vid.
@tylerfabish5578
4 жыл бұрын
Thats a custom made shifter. I probably spent too much money doing it, i think im in over a hundred bucks just in parts making that shifter
@coyote102076
4 жыл бұрын
@@tylerfabish5578 totally worth it! Heck that's less than the price of one tire, and will last much longer. hahahaha!
@danielsmith4090
4 жыл бұрын
My 4.2 is just cut off under the cab and everyone is fooled.
@jamesprice2163
10 ай бұрын
Everyone wants the shorty shifters for "speed shifting" but of your not drag racing it then it's not really important I know for mine I want a Hurst speedball shifter just for the classic muscle look
@alonsogarcia1990
3 жыл бұрын
Sounds great man!
@ivanbliminse5350
2 жыл бұрын
my 94 3.0 has an exhaust split right where the downpipe meets the exhaust system from the engine back. So I sound slightly better than a Honda civic. this sounds great
@JoseLopez-lk1br
3 жыл бұрын
NICE SOUND 🔥🏁
@brandoncollins6366
3 жыл бұрын
I had a 1992 3.0 it had a Cherry Bomb then I just deleted all everything. Much better sound then before! Lol Your truck sounds awesome!
@MIckveli2
4 жыл бұрын
sounds awesome !
@2193agus
4 жыл бұрын
Nice truck bro and nice sound
@warrenstephens3705
3 жыл бұрын
Sounds like a 6v71 Jimmy I used to drive.
@jamesprice2163
Жыл бұрын
Absolutely beautiful truck I just bought mine yesterday but I was curious what wheels those are (btw awesome shifter)
@tylerfabish5578
Жыл бұрын
Cragar D windows with a lot of negative offset. I think 15x8 size. Shifter is completely custom made
@darklord-lg2rg
Жыл бұрын
You can get the pistol grip knob from advance auto. It's not custom.
@tylerfabish5578
Жыл бұрын
@@darklord-lg2rg custom made. Hurst pistol grip bought from hurst. It isnt possible to install ANY knob on these trucks with this shifter because it is a splined shaft with no threaded hole or anything to grab onto. The way I mounted it is 100 percent a custom job. And no I will not explain it, since it is "not custom" then it doesnt sound like a hard job for you to figure out for yourself. Thanks for the view
@jamesprice2163
Жыл бұрын
@@tylerfabish5578 thank you mate love the video and the truck
@InternalCombustionGarage-pg7ro
3 ай бұрын
Doesn’t sound like a V8 but it’s damn near the best sounding V6 out there
@stevenwynboom1700
Жыл бұрын
Sounds like a 1/2 v8 honestly 😉 thinking about doing it to my 97
@filletmignon5221
Жыл бұрын
That sounds better than my 5.3 vortex with dual cat backs
@stevenwynboom1700
Жыл бұрын
@@filletmignon5221 😂🤣😆😂🤣😆
@JuanLopez-rn5ci
2 жыл бұрын
A sí le pondré un silenciador a mi Ranger 4.0 suena muy bien la Ranger del vídeo. 👌
@AICS-Vizion
6 ай бұрын
Sounds mean 💪💪
@Roofer101
2 жыл бұрын
Can you please message me for a few questions I have about this transfer to the flow master? Is this a job you did at home ? Sounds great! I want to delete the Catalytic converter on mine because I think it may be clogged,
@shanemintz03
3 жыл бұрын
Buying a JBA Exhaust header kit here in the next few weeks for my 91' Ranger. There's no inspection here in Tennessee so I have no cats, just a straight pipe with a muffler. I'll be putting a manga flow on after the headers and hopefully it'll sound good. It's unfortunately a automatic and just 2WD but it's better than nothing.
@tylerfabish5578
3 жыл бұрын
I didnt know they made headers for rangers. I could never find a set for my 3.0. Im assuming the 91 is a 2.9 v6? And why not do what i did, the flowmaster 44? Flowmaster 10s sound good too
@shanemintz03
3 жыл бұрын
@@tylerfabish5578 www.kmjperformance.com/i-31603079-jba-1646s-stainless-steel-cat4ward-headers-w-y-pipe-1991-1993-ford-ranger-3-0l.html This is the link to the JBA header kit that I'm getting. I'm 95% sure this is compatible with my truck. I have a 1991 Ford Ranger XLT 2WD with the 3.0 Vulcan V6. Is there a difference in performance in the flowmasters or are they all the same?
@tylerfabish5578
3 жыл бұрын
@@shanemintz03 omg my man i am gonna need to see some videos of that when youre done. Please come back and notify me when you do that, ive never seen headers for a vulcan
@shanemintz03
3 жыл бұрын
@@tylerfabish5578 It'll be at least a month or two until I get everything installed. You have a discord or Instagram?
@shanemintz03
3 жыл бұрын
@@tylerfabish5578 Update on the Ranger, bought the headers but they unfortunately had to refund it because they discontinued that part. So I've gotta go fishing on the internet for some different headers.
@afitz6389
Жыл бұрын
Kudos to this Danger Ranger, sometimes a 6 is enough...like now😂
@bigboredom5800
3 жыл бұрын
Just wondering, on a scale from 1-10, how much would my neighbors hate me if i had this exhaust and started my truck at 5:30 in the morning to go to school? Its my only car and I dont want to make more enemies here.
@tylerfabish5578
3 жыл бұрын
if you copied this exhaust EXACT to my setup, which requires removal of all the cats, then it will definitely make some noise. However, it's a small 3 liter v6, its not gonna make the same noise that a straight piped big block muscle car will. Honestly I'd say go for it, idling its not terribly loud, just don't romp on it until you're down the road.
@tylerfabish5578
3 жыл бұрын
check the video i uploaded a couple days ago, i did a lot more shots of the truck from the outside while its moving, I also changed it from side exit to axle dumps but the loudness is basically the same so you can use it as an idea
@bigboredom5800
3 жыл бұрын
@@tylerfabish5578 Thanks man! i think ill go for it, it sounds to good not to!
@tylerfabish5578
3 жыл бұрын
@@bigboredom5800 cool, check the other video out too. Axle dumps sound slightly different. They both sound good, but i think between the two the axle dumps are my favorite. Since you're going as far as to change the whole setup you may as well get it right the first time.
@travisperry7985
4 жыл бұрын
Sounds like a 5.0!
@dannygallagher9290
3 жыл бұрын
Sounds nice
@Kenny370
Жыл бұрын
Doesn't sound like a V8 it sounds like a badass V6
@MegaRyan123456
4 жыл бұрын
Drones just like any v6 🤣
@joshuaallender2986
4 жыл бұрын
Ouh I like this
@karlieweddle8333
Жыл бұрын
Wow almost sounds like my K1500
@barbaralandals3815
3 жыл бұрын
At 2:07 is sounds like a Cummins
@577buttfan
3 жыл бұрын
It does sound like a V8 it even sounds like it has a slight cam in it only idle when you went through the RPMs a bit I could hear the V6 sound that's funny
@spacenerd2782
Жыл бұрын
Thinking of doing this to mine it’s a 2001 was wondering how the pipe is routed and about how much it costed
@StevenHD2
4 жыл бұрын
What wheels and tires you got on it they are clean
@tylerfabish5578
4 жыл бұрын
15x8 cragars with 255mm wide firestone firehawks
@dad3562
3 жыл бұрын
Holy cow what muffler did you use? Did you use 3 inch exhaust?
@CaptainRew
2 жыл бұрын
flowmaster makes like 20 different mufflers. which one is this???!!
@keithjones197
2 жыл бұрын
Sounds like like a small Cummins diesel under acceleration.
@Cleary_22
4 жыл бұрын
How’s the hanger setup for it? Mine ended up being rusted out so did yours come with a hook on top to put it on the hanger from the cab
@CHEVROMAX
2 жыл бұрын
Has some have this sound in a Toyota V6 3.0 ever? i´d like to sounds like your V6 ranger.
@braydonsalata2438
3 жыл бұрын
Did you gut the cats? Sounds like you did
@351cleavland
Жыл бұрын
Filmed during the famous 5 minute Earthquake of 2019.
@OscarHernandez-il8tv
4 жыл бұрын
What’s your setup trying to make mine just like this
@charleslewis8968
3 жыл бұрын
Swap a 4.0 gauge cluster into it
@captainnug_6031
Жыл бұрын
@tylerfabish5578 got any links for the exhaust setup, like is there any kits i can buy on ebay or something? Appreciate if you can respond, tryna do this with my 92 3.0 v6 ford ranger.
@MultiPablo1987
2 жыл бұрын
What's the tire size it looks nice.
@04mcdonald
2 жыл бұрын
Take it up in the rpm’s. You shift it like it’s a diesel hahaha
@unknowngamer714
11 ай бұрын
random question gas gage broke and its stuck at full anyone good recommendations
@chrissagredo7129
4 жыл бұрын
Wonder if the sound would be as good with the cats on. What diameter pipe do you have after the muffler? I’m gonna keep mine all stock and just change the muffler and duals outta there
@TheChrismaster619
3 жыл бұрын
Good question, I can not remove the converters, I live in Cali but I will buy the muffler anyway
@jaredalexander3403
3 жыл бұрын
@@TheChrismaster619 there's ways to gut cats in cali an pass smog im doing it rn
@NoSocialStatus
Жыл бұрын
@@jaredalexander3403 how? I need this asap!
@jaredalexander3403
Жыл бұрын
@@NoSocialStatus you need to buy a spark plug defouler about 7 to 15 bucks at a auto store an use it to raise the down stream o2 up out of the main stream so it reads different an doesn’t set a code
@keithjones2340
3 жыл бұрын
good luck trying to pass inspection in states that require one.
@tylerfabish5578
3 жыл бұрын
Wasnt planning on it.
@dalejohns2758
3 жыл бұрын
Good God this dude must be 90yrs old or something! I waited 7 Minutes an 8 Seconds for him to ROMP On it through the gears!! But Nope Nothing at all.
@tylerfabish5578
3 жыл бұрын
Watch my more recent video
@fiatman71
Жыл бұрын
Sounds like a 60 degree V6. Nothing wrong with that but it does not sound like a V8.
@Bugboi2009
2 жыл бұрын
My grampas truck sounded about the same till it got t-boned
@dylanacker5693
2 жыл бұрын
How did you do the cat delete?
@wesleyaleixo7944
Жыл бұрын
Parece uma mocinha dirigindo
@capnangus8769
3 жыл бұрын
Can't find it in the comments but what size of pipe are you running. What size before and what size after the muffler.
@tylerfabish5578
3 жыл бұрын
Just have your exhaust shop figure it out. Order the part number in the top comment, and whatever size that is is what i got
@tweakerrrrr
Жыл бұрын
can you please tell me what exact flow master muffler you have installed?
@tylerfabish5578
Жыл бұрын
Read the top comment
@MelvinElian
Жыл бұрын
Any advice to me so I can get mines to sound like this I have a 2006 4x4 ford ranger 2006 v6 haha
@tylerfabish5578
Жыл бұрын
If you have a 4.0 then you can't. If you have a 3.0 then just copy the setup I put in the video
@AY-fc7og
3 жыл бұрын
What is the muffler
@dankkitty7226
3 жыл бұрын
If this is a 3L, will my 4L V6 sound even meaner with this exhaust?
@tylerfabish5578
3 жыл бұрын
No lol
@dankkitty7226
3 жыл бұрын
@@tylerfabish5578 but bigger engines mean bigger sound right?
@tylerfabish5578
3 жыл бұрын
@@dankkitty7226 go watch some videos of a 4 liter engine. They sound dull and annoying. Go read the ranger forums. The 3L is the best sounding ranger engine, hands down
@dankkitty7226
3 жыл бұрын
@@tylerfabish5578 kzitem.info/news/bejne/q5Bt2a6GoHeaq6w I mean this sounds pretty good to me
@tylerfabish5578
3 жыл бұрын
@@dankkitty7226 just do it, man. Its your money. Do what makes you happy.
@blakehuffman176
3 жыл бұрын
What’s the exhaust set up
@jarbis6515
4 жыл бұрын
what escape did you add
@kyronroberts7319
4 жыл бұрын
Does it have the 3.0, or 4.0? I’m not a big ranger guy so I don’t really know.
@tylerfabish5578
4 жыл бұрын
3 liter
@tinosands5775
Жыл бұрын
Where did you get the rims and center caps?
@tylerfabish5578
Жыл бұрын
Cragar D-Windows, you can find them online. I believe it had a -19mm offset and 7 inches wide? No wheel spacers. This is all from memory
@ivancoley11
2 жыл бұрын
It sounds like a honda valkyrie rune motorcycle
@anthonytweedie3467
6 ай бұрын
Whats the exhaust set up your running?
@SkyrimEnjoyer253
6 ай бұрын
It says in beginning of the vid
@uncrustable9923
5 ай бұрын
decent for a 3.0
@johnleu3217
2 жыл бұрын
What size pipe?
@abandonedwayamoon8749
3 жыл бұрын
Sounds super good but not anything like a v8 !
@brennanmahaffey3991
3 жыл бұрын
Does it still have the cats on it
@brookscarver3099
3 жыл бұрын
No
@jamisonnichols2950
4 жыл бұрын
How much
@kolbyhardy6563
3 жыл бұрын
Idle sounds similar to a v8 but anything after that not a chance in hell 😂😂
@kendallbillington2901
3 жыл бұрын
Where did you order your stick from
@tylerfabish5578
3 жыл бұрын
This is actually completely custom made by me. It was pretty challenging
@DocsPropShop
4 жыл бұрын
What's the flow master part numder?
@tylerfabish5578
4 жыл бұрын
I am not sure but it is a Super 44 2.5inch single in dual out.
@tylerfabish5578
4 жыл бұрын
9425472
@WillowandKat1
4 жыл бұрын
Is the catalytic converter still there?
@tylerfabish5578
4 жыл бұрын
No....
@WillowandKat1
4 жыл бұрын
@@tylerfabish5578 ok thinking about running the same set up on my 1997 4.0l ranger
@tylerfabish5578
4 жыл бұрын
@@WillowandKat1 the 4 liter sounds different!!! I suggest you watch videos of those first. The 3 liter sounds WAY better than the 4 liter, even though the 4 liter is more powerful. Every video of 4 liter rangers with open exhausts sounds like clapped out impalas or grand prixes. Just be careful
@WillowandKat1
4 жыл бұрын
@@tylerfabish5578 I'm not running no straight pipes on my truck Im going to go with the 1 in 2 out flowmaster 40 muffler out the back or eather the thrush welded 1 in 2 out or true duals with a 2 inlet 2 outlet muffler of the same mufflers a 4.0 sounds about like yours with no cats but if it has catalytic converters and then it sounds totally different
@nitroxylictv
3 жыл бұрын
sounds like a tiny diesel
@eduardoricardo1731
4 жыл бұрын
Que flowmaster es?
@tylerfabish5578
4 жыл бұрын
Super 44
@zapwatt
Жыл бұрын
Nope, sounds like a V6 with loud mufflers.
@chrisbeekley1887
Жыл бұрын
My v8 ranger sure doesn't sound like that
@colemcauly7543
3 жыл бұрын
Get on it I can’t tell
@tylerfabish5578
3 жыл бұрын
Check my newest video bro, thats what you wanna see
@colemcauly7543
3 жыл бұрын
@@tylerfabish5578 it sounds like a v6 but more like the 4.0 v6 but good popcorn you know any tuners for rangers
@nicknackpattywackshow5011
3 жыл бұрын
Christ. Wtf is the reason
@cheeseakins2780
4 жыл бұрын
Stock headers
@tylerfabish5578
4 жыл бұрын
Yes
@wb8040
3 жыл бұрын
Untuned can.
@vdubgarage6781
Жыл бұрын
Literally sounds nothing like a V8.
@giovanniespino3384
3 жыл бұрын
They sound cool but they old cars in the end
@83malibuwagon
3 жыл бұрын
What's your point old cars are better than new cars so that's a compliment
@DownSouthPerformance177
4 жыл бұрын
You don’t even get into it
@tylerfabish5578
4 жыл бұрын
I've got another video up. Regardless. "getting into it" takes like 10 seconds to hit 60 mph, its not a race car.
@DownSouthPerformance177
4 жыл бұрын
Tyler Fabish I meant just simply putting the pedal to the floor and not driving like a pussy
Пікірлер: 194