Okay, I know I got a good laugh out of the "screws weren't included to mount the puck lock to the hasp" comment. Proves we're not perfect, just that we're a hard working company that sometimes misses things! We realized about a week ago that our first batches went out without the pucks already attached to the hasps as they should have been (meaning that the screws would be included). A lot has gone into this entire product line, and that detail was missed on our assembly/packaging line. So, if any of you end up getting one of these and it doesn't have the screws, we'll be happy to mail some out to you (just give us a call). They are 1/4"-20 x 1/2" flat head stainless steel screws and you can pick them up just about anywhere. The packaging is actually made from aluminum and not steel. The powder coating on it obviously gives it a steel look and feel, but it's the weight of the product that really makes it feel like steel. We know our packaging is a bit over the top right now, but put yourselves in our shoes. We need to be able to grab the attention of a Pro customer as they're walking down the aisle and, hopefully, grab it enough for them to want to learn more about the product. These pucks and hasps are heavy and silly cardboard packaging just can't hang. So bear with us for a while... once everyone is up to speed on PACLOCK, then we'll find a way to cut down on the packaging. We figured with aluminum, at the very least you can put it into your recycling bin (there should be a sticker on the back of the packaging mentioning that it's aluminum and recyclable). And as a West Point grad I hope all of you can trust me when I say that this is not a sponsored ad or promotional deal with LPL or BB. We trust and respect them (along with the balance of the LockSport community) and value their candid feedback. Fortunately our hard work and innovative ideas seem to be hitting the target so far and that makes these videos seem promotional. In essence, these reviews end up being a bit promotion, but only because the products are really cutting edge for what they're intended to do.
@chasemc69
5 жыл бұрын
well you've just proven why you go through the effort of sending these products to the community. you get feedback and fix any oversights. good job.
@lorenzooopoza
5 жыл бұрын
Wow, here you are. Great PR! TLPL is probably the final test for any lock related product hahaha keep it up
@bstrickler
5 жыл бұрын
Definitely good to see a company watch reviews of their products so they can learn where they can improve, and where they may have goofed up, and are reaching out to fix their mistakes (i.e. the missing screws). I'd love to see a lock designed for roll up garage doors that have the slide "locks" (google "Mini Warehouse Lock Flat Door" for the style I'm talking about). My shed has one of those style locks, and I would rather have something more secure than a POS "master" lock.
@许二宝
5 жыл бұрын
That package is probably more secure than a master lock
@celiaengland871
5 жыл бұрын
Any chance of you guys coming out with a beefier version to accommodate a half inch chain?
@Flynrat
4 жыл бұрын
His videos are actually stress relievers to me; calming voice, intelligent banter, deductive reasoning, satisfying conclusions!
@rogersanderscustoms8121
4 жыл бұрын
Yes, this is an A+ channel. Along with the qualities you mentioned there is no click-bait involved and LPL isn't putting his picture in any of the thumbs with some silly staged facial expression.
@S1kTh66
3 жыл бұрын
Sherlock Holmes of Locks.
@lukesnyder3358
3 жыл бұрын
The universe all suddenly makes sense and order is restored whenever the lock opens, and I'm whole again.
@TheAstroProblem
3 жыл бұрын
Well besides the gnawing fear in the back of your head thinking of hearing "hello everybody this is the lockpicking lawyer" at your back door
@chrispysaid
3 жыл бұрын
@@rogersanderscustoms8121 Sure, because the videos are about the locks not the lockpicker.
@THR33STEP
5 жыл бұрын
Masterlock had plenty of warnings to fix their products and plenty of time to make the fixes yet they failed to do so. I hope the Paclock line is a huge seller at the Home Depot!!!
@wileecoyote5749
5 жыл бұрын
@sbcontt YT correct.
@dahveed284
5 жыл бұрын
Master knows exactly what they're doing. They're making a cheap lock for cheap people that are easily fooled by the claims on the packaging. I'm sure some of the first buyers of these PacLocks will be a MasterLock employee looking to check out the competition and copy them.
@thirtysixford
5 жыл бұрын
A little off topic, but I recently purchased a new model 3650 American Padlock from CLK. It arrived a few weeks later shipped directly from Master Lock. The back has a laser engraved 2002CD SERIES A3650 where the familiar date code would be stamped. I emailed M Lock and asked if they could send me info how to decode this seemingly new date code. First response was "why do you need this, what are you trying to accomplish ?" I explained the locksport hobby and I was only trying to determine the date of manufacture. She was very nice, and found it very amusing that anyone would actually have padlocks as a hobby. She said the date of manufacture was 2002. Somehow I knew she was going to say that. So their latest lock has been sitting on a shelf for the past 17 years.... wow
@jbdragon3295
5 жыл бұрын
I know my local Home Depot only has Master Locks. I got ones with the largest shackle that would fit the trailer storage units we have at work. We have like 7 of them. One night a couple months ago, someone at night cut all the locks off. The 2 refer trailers I had doubled the locks on and both were cut off. Luckily those had been recently emptied as we needed to move them out of the way for the huge solar panel going up overhead. There was really nothing of value in the other trailers. I believe they were looking for tools and stuff like that as we were expanding our building with a huge new freezer. So believe they have new locks to lock up trailers which have no exposed shackle? The odds of someone picking is slim and would be slowed way down having to pick all the locks instead of cutting them. Those Master locks are such garbage. So as soon as my Home Depot has them in stock I’ll be buying them and keying them all the same. Small price to pay.
@KeylessEntry
5 жыл бұрын
Please bring PACLOCK to Australia👍 Only major competitor in Australia is Lockwood but they don't include the same range and format of PACLOCK, I'm sure the container lock that locks the lever handles would be a big seller✅
@CuthbertNibbles
2 жыл бұрын
5:34 LPL doesn't really stress it, but I think it's worth mentioning, look at the design simplicity of this look. There aren't a dozen complex pieces that have to be glued/screwed/assembled, cobbled together and made to work because there was already a manufacturing line set up for them from another product. This is what I would call true American engineering, simple and functional so there's less stuff to break, it's cheaper to make, and it outright looks better. Good job PACLOCK, it's always nice to see the underdog start taking the big boy's lunch money.
@sl_50
5 жыл бұрын
"A click out of 2... binding at 3..." And just like that I've lost my new bike.
@GadgetAddict
5 жыл бұрын
The thing is, LPL is so good that he makes nearly every lock appear easy to pick open. Most petty thefts use brute force, not picking.
@mtnbikerfred
5 жыл бұрын
Hahaha! He and BB make them look easy. I will point out something you might know. Once I've picked something once, it's almost always easier for me the 2nd and subsequent attempts. Especially remembering where spools are and the order of setting.
@thecompetentman1
5 жыл бұрын
Be sure to get back to us with how long it takes YOU to pick one.
@sl_50
5 жыл бұрын
@@thecompetentman1 if i have a key it couldn't take more than 5 seconds at most.
@SoCalKev
5 жыл бұрын
LPL should try to pick the Pinheads U Lock. Or the Abus Granit Extreme
@19redmiata94
5 жыл бұрын
The packaging has more security than a master lock!
@Joe-kb1sm
5 жыл бұрын
Anything is better than a master lock
@user2C47
5 жыл бұрын
@@Joe-kb1sm A Master lock may not be a very good lock, but it _is_ a lock, and that _can_ make a difference. It is certainly more secure than a zip tie.
@killertigergaming6762
4 жыл бұрын
User 2C47 nah a zip tie is 50x better
@19redmiata94
4 жыл бұрын
@@killertigergaming6762 That zip tie ironically, can be used to pick a master lock model 3.
@AntonyThorburn
5 жыл бұрын
A Company that listens... Not Normal, but appreciated.
@veg7nlif376
5 жыл бұрын
I just wanted to buy a new lock for my bicycle, but this dude made me watch 932 videos. Now I still dont know what to buy, but learned alot. Thx.
@oldbatwit5102
5 жыл бұрын
It's an old trick to hide your bike under a cheap opaque rain cover, thieves can't be bothered to look underneath. They will steal the one next to it.
@elitedavidhorne8494
5 жыл бұрын
What I learned from watching LPL is not buy an expensive bike. I even have the same lock he has for my moderately priced bike. But I wont buy an expensive bike.
@wessltov
4 жыл бұрын
Try Bowley
@Mike_Rogge
4 жыл бұрын
@@wessltov I don't think bowley makes a u-lock, the chain could be cut. Just make sure to always lock up your bike near more expensive ones, and you should be fine with most locks.
@francoischarbonneau9447
4 жыл бұрын
I think he recommended the Kryptonite lock for bikes.
@losteroni
5 жыл бұрын
The one with the chain would be perfect as a motorcycle lock . You don't really need to lock it too anything just put it through the wheel and the swingarm . Love the color and the sound it makes !
@timroot-shoshin4287
5 жыл бұрын
@joseph bourdeau, thank you! I was looking for a reason to need these locks. Now I just need to find 4 more so I can buy a 5 pack of the cores and use one key.
@kenabi
5 жыл бұрын
best designed hasp i've seen for a puck lock yet.
@andrewp.1873
5 жыл бұрын
If LPL wanted to steal your stuff, you might as well just use a hockey puck. lol
@mtnbikerfred
5 жыл бұрын
Yeah, I'm "in" for a freestanding version
@thomasjenkins7506
4 жыл бұрын
no, it's not. turn that lock 45 degrees so the keyway is on the side. then put a shroud over that side allows only enough room to fit your hand and the key. that also serves to cover your bolt holes. now you have a good design for a puck lock.
@stinkyvonfishstix4196
5 жыл бұрын
I lose a lock every week on my landscaping rigs due to someone just laying it down and then riding off....
@expertoflizardcorrugation3967
5 жыл бұрын
A few tom and jerry style traps later
@spacejamgoliath
5 жыл бұрын
Loose
@KaseyWynne
5 жыл бұрын
@@spacejamgoliath Well, the lock is loose. That's why they lose it.
@mfree80286
5 жыл бұрын
@@KaseyWynne Maybe this is a convenient time to ask PacLock to include a cable lanyard option on the puck, just a little loop for a thin chain? Or are you talking about switching to the chain lock?
@Anonymouspock
5 жыл бұрын
@@KaseyWynne also, they are loosing it, as in releasing it. Only issue with that interpretation is that *they* are the ones doing it, not someone on their crew.
@pagedeveloper
5 жыл бұрын
LPL thank you for what you do. Your videos have made me get back interested in locks again. Had it a long time ago, and someone told me that picking a lock would destroy it. So I never did, but watching your videos, it made me see that is not the case. I have been given a few challenge locks that I am working on. Thank you for what you have shown the lock community.
@iHazRayGunz
5 жыл бұрын
if The mafia tried to kill him, they would hear his muffled voice below the ocean “1 is binding two clicks out of 2... dropped further into false set nothing on 3..”
@niccatipay
5 жыл бұрын
And its open.
@ZenoDLC
5 жыл бұрын
Mafia boss : Should've stuffed him into a barrel and filled it with concrete, smashing his face to slow down forensics
@niccatipay
5 жыл бұрын
Muda muda muda. He will reappear at the nearest safe location that has been secured with an abloy.
@user2C47
5 жыл бұрын
They couldn't get past the gate with a "low security" lock on it.
@jacobp.2024
5 жыл бұрын
@@ZenoDLC that'd be the last thing he'd say before LPL unlocked the door to his home..
@williamlovemo8596
5 жыл бұрын
I love how this video is like "Oh these are great locks and you should use them they are really good here Watch me pick it in under a minute"
@zaneh6224
5 жыл бұрын
Yes, but it's being picked by an expert which your average joe is not , under a minute is better than your average master that can be picked in about 5 seconds
@danielkorladis7869
3 жыл бұрын
He's really good at lockpicking and likes a challenge. Thieves aren't after a challenge, they're after easy scores.
@thehighprotondiet3127
5 жыл бұрын
The security of these will depend on resistance to Ramsets and angle grinders, not how fast LPL can pick them.
@peterv1318
5 жыл бұрын
The High Proton Diet - exactly. But I don’t think you will see him do a force attack on it.
@lolomgwtfun
5 жыл бұрын
I remember as a kid I found a masterlock in my garage so I decided to pick it open with only paperclips and it was surprisingly easy somehow I used a single paperclip as both a rake and a tension tool to get it open really consistently for years I thought it might have just been a fluke but after watching your videos I know its not can you make a video showing yourself Macgyvering a masterlock open with only a paperclip? I forgot to mention I remember it was a disc shaped lock, I don't know the exact model other than it was a masterlock
@eddedwards9879
4 жыл бұрын
2:04 im guessing most people that use these have easy access to a welder. I always weld my bracket on under the lock and grind off any identifying information off the lock and bracket, makes you tubeing how to defeat it a lot more difficult.
@asailijhijr
5 жыл бұрын
LPL, can you or have you demonstrated the difficulty of bumping caused by differing spring strengths?
@dakotablust1814
5 жыл бұрын
Thanks! I'm moving up to a much bigger work truck here soon. Wanted to look into upgrading the knapheide locks, by adding onto the existing locks. This should do marvelously and I'll be able to do it cheap enough the boss can't say no... Especially when we're talking tens of thousands of dollars of expensive steel.
@RookieLock
5 жыл бұрын
Paclock is making some great, very innovative products! I'm very impressed.
@ozziew007
4 жыл бұрын
can't be just me that finds it so surreal how he explains for the whole video how good this lock is and then proceeds to pick it in about 15 seconds!
@PGGraham
5 жыл бұрын
Perfect timing! I'm about to outfit a work van with a ladder rack!
@PGGraham
4 жыл бұрын
@Hell's favorite NPC #69OU812 . exe I have them (6 locks) on order.
@kutter_ttl6786
5 жыл бұрын
I REALLY hope these locks are carried in Home Depot's Canadian stores and it isn't just a US only thing.
@justanotherokie3149
5 жыл бұрын
My work on automobile suspensions have taught me one thing. When you were discussing spring tensions, when you make a spring shorter by removing coils the spring gets stiffer. They springs are probably the same, but if one is shorter it will be stiffer, same spring, different compression.
@TheDutchSoupPissingCompany
5 жыл бұрын
LPL, 40 sec, but you had to do it twice due to the spools, serrated pins and such. Seems a nice design to me.
@Sustainone
3 жыл бұрын
I certainly hope Home Depot gives you a kickback, because I’m only buying these at HD because of your endorsement LPL
@kniazjarema8587
5 жыл бұрын
I see a lot of negative comments about Paclock and I think that's sad. There's finally a good(I think great would fit in here) product and many people don't like it. It's not like a lot of robbers have pick skills same as LPL, and also they mainly use brute force. Also, a lot of people don't understand that LPL and Bosnian Bill WEREN'T sponsored. They already stated they got them early to review them. In my opinion, these locks are great enough for average customer who is not into picking stuff but want them to be tough enough to hold until the owner comes back or notice something. If I had stuff to lock away, I would choose paclock mainly because how recognizable they are and because I know they are tough(thanks to LPL and Bosnian Bill).
@paclockpres.9805
5 жыл бұрын
Very much appreciated, Nibi! Well, now maybe someone will think you're sponsored!!!
@joshuarosen6242
5 жыл бұрын
I thought he seemed impressed. I am used to hearing him absolutely rubbish poor locks so we all know he does that if he doesn't like something. I've not heard him being this positive about a lock very often.
@kniazjarema8587
5 жыл бұрын
@@joshuarosen6242 True, although I can't sense that positivity in his voice, I am pretty sure he I heard a lot of good things about this lock.
@jamendetvarjukul
5 жыл бұрын
@@kniazjarema8587 I think in this price class it doesn't get much better. If you need better pick resistance you need a more advanced core.
@kniazjarema8587
5 жыл бұрын
@@jamendetvarjukul Of course, just like you said - it doesn't get much better, that's why i think this lock is great for it's price.
@Super_overland
3 жыл бұрын
I’ll be buying this for my fleet of fans. But also I would to see you one day attempt to pick a lock while in in actual use because I bet the weird angle of it mount so low on a fan or up high on a ladder would make picking a lot harder.
@PaulSteMarie
5 жыл бұрын
Actually, I think Home Depot tends to keep machine screws and padlocks in the exact same aisle.
@slink1957
4 жыл бұрын
@ Paclock Pres. I purchased a couple of trailer locks, some padlocks and a 6 pack of cores thru HD online. I was surprised to see the cores in a plastic sleeve that operates the key retaining lock/unlock functions instead of metal. This has already caused a problem that affects hard turning of the key. When I changed out the first core it didn't seat correctly so a gentle tap was applied. The second one went in smoothly as did all the rest. The core on the first lock didn't work right so I had to replace it and bought another 6 pack of cores to keep everything keyed alike and changed out all the locks. Turns out the problem was where one of the holes in the core was drilled a small but sharp snag didn't get trimmed and this caused the core to bind. Rather than having to buy another 6 pack I decided to file the defect down and noticed the core was not a solid material instead it was plated and now that was comprised. I decided I would have to live with that. One last thing ... on both trailer locks the silicone weather covers were not fasted to the body securely enough and both have fallen off after just 3 months in service. I'm done now but have just one question. Why use plastic for the sleeves and plating instead of brass? BTW, I still have my allegiance with you and appreciate your honesty. Thank you.
@paclockpres.9805
4 жыл бұрын
Hi David! Thank you for your purchases and your interest! I'm never quite sure how to word "well, you're not quite right" type responses to customers, so I hope I do a good job of being 100% friendly! The black sleeve you mentioned as plastic always makes me sad when I hear that because it's made out of aircraft grade aluminum. Not only that, but we actually do Anodizing Type III which is a hardening process to the aluminum. I promise, no plastic in our locks except, I guess, for the blue "PAC-BAND" cylinder cover on some of our locks! For the core, that's a solid brass core. No die cast zinc, no plastic, no nothing but brass. But to help minimize any galvanic corrosion possibilities, we did a nickel plating on top of the brass. So when you filed part of it down, you should have seen the brass get exposed. That's not really a problem to have a small section unplated... the plating is just extra insurance so to speak. I realize that sometimes customers think that a shiny, silvery colored metal part is expected to be steel. All good quality cylinders/cores are made out of brass... some cores from China will be ABS (ug.). Often you'll see die-cast zinc cores... again, not great because they can be easily melted. But the cores in our UCS line, like the rest of our 6-pin rekeyable PACLOCKs, are out of brass. With all of that said, the customer is always right at PACLOCK. So I hope what I wrote makes sense and is reasonable. Even still, I apologize for the confusion and the troubles you had!!! We want everything to always be 100%... that's our goal. If you have the time and can shoot a quick picture of the spot you mentioned you had to grind down on the cylinder, I'd really appreciate getting my eyes on it. All my contact info is up on our website or you can DM me! In terms of the "PAC-BAND" (the blue cylinder cover), I'm sorry to hear that those little guys have fallen off already. Definitely shoot me an email with your contact info, we deliberately made those field replaceable for lots of reasons. They are somewhat easy to just pull off... but any other method (like what Master does with hard plastic) just doesn't work. We can get you some replacements without a big deal! Once again, thank you for the feedback! I'm always available if there's anything PACLOCK can be doing better... or if anyone would like to tell us how well we're doing!
@ericanderson4801
5 жыл бұрын
"I'm excited about this product!" (Picks it easily.) The fact that you had to think about it at all tells me I'm making a trip to Home Depot. I'd been looking for a keyed-alike system when it occurred to me to check your channel. Sure enough! Sold.
@paclockpres.9805
5 жыл бұрын
Thanks! We have lots of options on Amazon right now too... you can key alike a variety of products and pick the quantities of each that you need ~ just pick the same key number for all of them and there you go!
@dahveed284
5 жыл бұрын
Went to my local homie depot this morning. Checked out the lock area and just a wall of crap! No Paclocks there yet. Hopefully they'll be there soon. I had to purchase a padlock recently and was forced to buy a master. Also hopefully HD will make an effort to keep these in stock and well displayed. I know this is an exclusive product for them, but exclusively is an issue for us consumers IF HD doesn't keep them in stock.
@timothyavendt677
5 жыл бұрын
Been reading paclocks comments. They are starting mostly in the west coast for now. I hope they spread fast enough
@hunterbowie8132
5 жыл бұрын
Having worked for HD for some time in the past, they usually roll out products in stages testing for around 6 months in certain stores, then expanding to a region, after 4 months or so they may then roll out to most stores. Keep in mind many smaller stores never get the full product offering as well. Simply not enough space or predicted to sell poorly. It sucks for the hype but it makes business sense.
@dahveed284
5 жыл бұрын
Hunter Bowie My HD is a smaller one. I’ll maybe check a larger one near me and see if they have it. I suspect with an exclusive product, the rollout maybe quicker. Maybe not though.
@mhappy4520
4 жыл бұрын
The custom pin tray is a nice touch.
@tarushdei
4 жыл бұрын
Ever since getting into LPL and Bill's channels, and the locksport community, I've been learning so much about locks and security, and been searching for better padlocks, and now, clearly have found a great product for the price range I'm interested in, but amazingly, it's not really available in Canada (in retail). I hope this changes soon, we are really in need of some superior locks up here.
@PacificLockCompany
4 жыл бұрын
I hate to keep saying "we're working on getting to Canada", but we are! There's a lot of people who want PACLOCK up there and we'll get our stuff to you soon! It's a bit tricky with the duties & tariffs, but right now the best way is Amazon.com. We charge a flat $35 fee for shipping on all orders $0 to $99.99, and for all orders $100 or more, shipping is free!
@DatBoiOrly
5 жыл бұрын
I'd wish there was something like the chain lock but made for van doors instead of ladders no one uses chains anymore there are specific locks designed for that seems like kinda of a waste of a good design
@FATL0L0
2 жыл бұрын
It’s been two years and I still haven’t seen the locks at any Home Depot that I’ve been to
@tomthompson7400
4 жыл бұрын
some great ideas and attention to detail there.
@PacificLockCompany
4 жыл бұрын
Thanks, Tom!
@robbabcock_
2 жыл бұрын
What well thought out products! Obviously Paclock actually cares about their product and customers!👍🙏
@dennisvessels3692
2 жыл бұрын
Boy you can tell that you are truly not a Locksmith, with employees and a retail store! You mentioned Home Depot enough! I own a full service Locksmith Company and also use, and sell Pac Lock products as I am sure a lot of other locksmiths do as well. Locksmiths were around selling Pac Lock long before Home Depot! And these products have been available at your local locksmith for a while now! If you are a lawyer? Is it true that 90% of a lawyer's work can be performed by a paralegal or the Legal-Hut down at the mall? For 1/10th of the cost of a lawyer? But seriously, Kudos to you, you do amaze with your skills and technique, I have been picking for 45 years, and admittedly would have difficulty with some of the oddball and high security cylinders you open! And Kudos to Pac Lock for making a great product and breaking into the Amazon and Home Depot national marketplaces, Pop's and son deserve everything they get outa the business, The have worked hard at it for a LONG TIME!
@zakaroonetwork777
3 жыл бұрын
So the packaging shows you were to cut through the lock. Nice!
@ejonesss
5 жыл бұрын
the other locks that bosnian bill showed has the core with the keyway vertically so picking is more difficult. if you are going to get a longer chain make sure to use a very good chain as the weakest link would be the chain if you nd up getting a cheap chain
@electronicsNmore
5 жыл бұрын
Definitely well made, but still "fairly" easy to pick.
@coen555
5 жыл бұрын
I wouldn't say easy to pick. Lpl just makes any commercial lock look like a D shackle in terms of security.
@bdf2718
5 жыл бұрын
The most likely attack is going to be a big hammer or a crowbar to rip the thing from the thin sheet metal of the vehicle door. Any greater security in the core itself would be kinda pointless.
@hatimsalim1355
3 жыл бұрын
And as always have a safe lock… ⬅️ this is what you should say instead, which I think is impossible
@dabnoregret3483
5 жыл бұрын
I think that the fact that the keyhole is pointing to the ground which make lock picking be more difficult cause of the angle
@AnnoyedTrucker
5 жыл бұрын
Very impressive designs...I'll for sure be getting these!
@Ramunas_Paplauskas
5 жыл бұрын
LPL actually sounds a little exited.
@sirgarberto
5 жыл бұрын
0:43 that must be the first time in history when imitating Master Lock is considered a good thing
@fervantservant5116
4 жыл бұрын
God Bless THE HOME DEPOT !!!!!!
@escutus
5 жыл бұрын
Bill and LPL are making me buy paclocks. I don't even need them.
@toledo152
4 жыл бұрын
Using that in the winter would suck. That will definitely fill up with ice.
@r1christian308
5 жыл бұрын
Can’t wait for the cargo trailer lock run down
@cabbyhubby
5 жыл бұрын
That first lock and hasp would work well on a cargo trailer.
@PaulieShortcuts
3 жыл бұрын
Found them at Home Depot, but noticed they use BEST brands outside on their rental equipment and don’t sell those
@fawzanfawzi9993
5 жыл бұрын
Can you use this lock to beat up thieves instead of protecting your stuff?
@josediazasmr6014
5 жыл бұрын
Fawzan Fawzi 😂 innovation!!!
@staticivi
5 жыл бұрын
i would argue that it technically still is protecting your stuff.
@gergokerekes4550
5 жыл бұрын
pick it up by the chain and flail it on them, gods it hurts just by thinking about how hard a hit with that can be.
@klj2382
5 жыл бұрын
Take off 1 sock, drop it in there and commence beating your enemies as needed
@johnfrancisdoe1563
5 жыл бұрын
klj2382 Would one hit each be sufficient to eliminate them permanently?
@Vonboon11dy
3 жыл бұрын
That packaging would make fun target practice
@feels_k21
5 жыл бұрын
I mean like is there any lock you can't pick ? Or any lock that last more than 10 min from you ?
@skeletonofwisdom2922
5 жыл бұрын
there are a few. Watch his video about "Nasty Keyways".
@SquirrelGamingProductions
5 жыл бұрын
Bowleys are unpickable. Also:The Italian 3-prong house-locks took him like 4 minutes of picking with 2 specialty tools and another tool he rarely uses.
@SquirrelGamingProductions
5 жыл бұрын
The Italian lock is the "Iseo Perfecta", check out that video he's seriously struggling.
@edwardtiangco1445
5 жыл бұрын
I'm taking notes.. i'm binge watching his channel right now.. new sub here.. haha.. thanks..
@johnfrancisdoe1563
5 жыл бұрын
AnimeNikkaJamal Weren't the Bowley picked already with a custom tool?
@EAFSQ9
Жыл бұрын
when you find out these puck locks are common use by cash security companies for department store change machines
@brianwest2775
4 жыл бұрын
Try picking one when installed! I imagine that reaching overhead to that roof rack installation would interrupt the lockpicker's style and make it more difficult. Unsure if the door-mounted lock would be in a difficult position or not. Since the lock is fixed, why don't they have some plates or blocks to make it more difficult to get hands in there to pick but yet still easy to insert and turn a key?
@MrKev7
3 жыл бұрын
There should be a government personal that would pay you to DESIGN the locks
@brandonerhardt4905
5 жыл бұрын
If like to see a puller on that core of the chain lock. It doesn't look like that set screw would hold up all that well to a slide hammer.
@dp9324
3 жыл бұрын
I often wonder if the LockPickingLawyer wouldn't make more money doing flat-rate lock picking services rather than practicing law?!
@DarkVampireL
5 жыл бұрын
They must be doing something right because Lawyer and Bill are having “lock-gasms” over these things.
@justbob333
5 жыл бұрын
more so then a minor upgrade over mastor locks at a steep price would suggest.
@ssmit80
5 жыл бұрын
I am curious to see how the ball bearind mechanism works. Since it closes with the key removed, is it possible to open it with a hammer or some other non-destructive method? I think it's awsome that another company is stepping into a big box store. All you ever see is Master Lock, Brinks, generic Chinese crap, and sometimes a Kwikset Smartlock.
@masheroz
5 жыл бұрын
Does this sound like a big advert?
@paclockpres.9805
5 жыл бұрын
Yes, but hopefully you can see it more as well made products that are pretty darn good because a good amount of thought and quality manufacturing were behind them.
@johnsmith-wx5fb
5 жыл бұрын
The lock is amazing.im not sure if you're aware but your username is similar to the lock brand name lpl is reviewing? Kind of funny.
@carlofrunzio6989
5 жыл бұрын
john smith hes the president of the company that makes the locks
@josediazasmr6014
5 жыл бұрын
MasZakrY room for improvement 😅😀
@martyshrekster
5 жыл бұрын
@MasZakrY To be fair, he's said before that just because *he* can pick a lock doesn't make it a bad lock. The vast majority of criminals are gonna take a pair of bolt cutters or a big hammer to the chain or shackles because lockpicking takes quite a lot of practice. Not to mention I'm sure LPL's pick time would be a lot longer if he was trying to pick this thing while it's on top of a van at some wonky angle.
@curlyvideos
5 жыл бұрын
Please ensure good focus when zoomed in on those pins
@firstnamesecondname5341
5 жыл бұрын
All these videos do is make me think nothing is safe 😬 time to install the electric ⚡️ shock counter measure 🤷🏻♂️😆
@wylinout2257
5 жыл бұрын
That or small shape charges
@bananya6020
5 жыл бұрын
Don't worry, both LPL and BB practice and take practice shoots before the video itself, so they get to know the lock well & get to pick it fast. If it was first take, LPL would have a lot more trouble (1-2min?) and the average criminal would not even be able to get it open in under 30. As for the experienced pickers, let's just say that you wouldn't have been able to keep your stuff safe either way.
@matthewf1979
5 жыл бұрын
Aluminum lock body? For a destructive bypass, try drilling from the face, directly into the chain retention boss on either side with a 1/2” bit.
@Tony_in_AZ
Жыл бұрын
2023 , Home depot does not carry this product. Home depot carries Master Lock brand junk mostly... thanks
@BronxLockPicker60Rodriguez
5 жыл бұрын
LPL, any idea when they be hitting the shelves of Home Depot? Thank you for sharing!
@coladict
4 жыл бұрын
I think the pins all being steel is not so much for drill resistance, as it is for durability. These locks are expected to see quite a lot of use, and probably abuse if thieves try to rake them open, so steel pins would probably last longer.
@Puntilaser
5 жыл бұрын
Just for clarity, are these videos sponsored or nah? Just seems a bit advertis-y, getting samples beforehand etc. No offence, just wondering.
@hendoman100
5 жыл бұрын
In response to the previous vid, PacLock claim not, and as I observed in comments there, the money he could get from sponsorship isn't worth the time it would take him as a lawyer to negotiate such a deal.
@paclockpres.9805
5 жыл бұрын
Nope ~
@nicolaijuulandersen8699
5 жыл бұрын
Nice to see other than Ruko, has a sense of making serious locks.
@JoeDutchman
4 жыл бұрын
Lockpicking lawyer promotes a lock. Me: Shut up and take my money!
@kailebgaylord9545
5 жыл бұрын
I'd like to see you put a lock back together. Just curious on what that process looks like
@Moletheus
5 жыл бұрын
Agreed
@stefangerman807
5 жыл бұрын
I don't really get the additional bolt hole under the lock. It still seems like you can grind the three boltheads of on the right side and free that side from the door.
@paclockpres.9805
5 жыл бұрын
Yes, you can grind the right side, but the left side is still locked on and the puck is holding them together. So you won't be able to open the door...
@IDKOKIDK
5 жыл бұрын
Are you and Bosnian bill being paid to promote this product? Both put out video at same time, both only saying positive things. Suspicious
@XanderNotZander
5 жыл бұрын
Not paid promotion, they were sent the product though, paclock have a reputation for watching these videos and making improvements/providing an explanation behind certain aspects picked up on in the videos, it's super interesting and good info for both paclock and consumers, they've commented on this video already actually, notably about the packaging used and clearing up the 'paid promotion' rumour aswell (its where I got this info from)
@paclockpres.9805
5 жыл бұрын
Nope, not paid at all. Just sent them the stuff and asked for some reviews.
@two_tier_gary_rumain
5 жыл бұрын
@@paclockpres.9805 That's how it should be. Fair and balanced.
@KeylessEntry
5 жыл бұрын
Cool locks with everyone having the possibility of converting to one key, brilliant!
@two_tier_gary_rumain
5 жыл бұрын
Only up to 5 or 6 of them (depends on how many cores in that replacement kit).
@UncleKennysPlace
5 жыл бұрын
@@two_tier_gary_rumain It's not particularly difficult to take apart the cores and make more of the same. I did it with the dozen locks at my house (did the 6 door locks as a set, and the six deadbolts as a set).
@two_tier_gary_rumain
5 жыл бұрын
@@UncleKennysPlace Yes, but you need to have a grasp of what to do.
@FATL0L0
3 жыл бұрын
It’s been over a year and I still haven’t seen any paclocks @ any of the 4 Az & 2 Ca Home Depot’s I’ve been too
@jeremymore451
4 жыл бұрын
LPL! I saw the other video on what tools you use, but I wanted to know if since then if anything has come along that you find to be a great first step towards learning how to pick locks.
@user-pi5xu7qs7n
3 жыл бұрын
Love it when he says yeah there were some security pins in there, but still made light work of the work. HAHA Love it!
@k5sss
Жыл бұрын
Security pins alone change the attack from a 3 second rake that a child could do to a 30 second SPP by the world’s best locksport. Not a trivial difference.
@jdorffer
5 жыл бұрын
I’ve scene pucks left on bumper of van twice and stay there for over 30 miles
@paclockpres.9805
5 жыл бұрын
Okay, got a good laugh here, thanks! Me too. And I see lots, and lots, and lots of vans where they only have the hasps and no padlocks on them. I've talked to lots of construction company owners and lots of plumbing company owners who are at their wits end because they want the higher security on their vans, but their employees literally just lose the padlocks day in and day out. So we think we've solved that problem. Bolt the darn padlock onto the haps and you're done. One thing LPL or BB didn't mention is that this puck/hasp combo was designed so that it can mount both on the rear swinging and the side sliding door WITH the puck fixably attached to the hasp. Lots of design and testing.
@thorlancaster5641
5 жыл бұрын
It'd be nice to have a dual ball bearing locking mechanism on these as opposed to a single ball.. My intuition tells me that if you used a sledgehammer and wedge you might be able to shear off the single pin that locks the top in place.
@paclockpres.9805
5 жыл бұрын
Once you get one in your hands, give it a shot. If you can defeat it that way, I'll send you your money back or maybe send you a new one if you'd like. Either way. I think that the all four of the pins will play a role because the tolerances between the pin diameters and the holes are pretty darn tight. So any sideways/tilting force will actually cause all of the pins to create some surface tension and help the ball bearing resist.
@thorlancaster5641
5 жыл бұрын
@@paclockpres.9805 There'll be a home depot nearby once I get to college, I might take you up on that offer. It's an iffy attack, but I could see it working.
@rainieleighla1720
5 жыл бұрын
The peoblem with the swappable cylinders is that Paclock doesnt include plug followers for changing the lock out and most people wont know that one is needed!!!
@paclockpres.9805
5 жыл бұрын
No plug follower needed... the average consumer will simply change out the whole core...
@mattbrocklehurst7980
5 жыл бұрын
Definitely thinking about the hasp and lock for securing a Jerry can to the roof of my fj cruiser
@Wei2321L
5 жыл бұрын
I wonder if you can pull out the core with the slide hammer attack?
@Vinemaple
2 жыл бұрын
Hey, cool branded pinning tray, congrats.
@tylerhoovler16
3 жыл бұрын
193 lock makers are pissed!!! lpl thank you for such amazing vids.
@delphic464
5 жыл бұрын
First off I was a bit disappointed in my local Home Depot today. After visiting the Paclock website I found a local store in the Phoenix area that was listed as being one of the Home Depots that was carrying Paclock products. The shelf was nothing but Masterlock products and the friendly employee nearby had no idea what I was talking about when I inquired about Paclock products. I even showed him the website that listed the store. I'll have to check back later. Second (and my real question), is there an orientation of a lock that makes it harder to pick? I always practice with a lock in my hand or vice and have significantly more problems when I am picking something more practical like a lock on a fence or locker. Can you discuss the importance (if there is any) in setting up a lock that best guards against access for easy picking?
@PacificLockCompany
5 жыл бұрын
Our apologies, they're working on it!
@besenyeim
5 жыл бұрын
Those pins are part of the top part. 6061 Al is not difficult to cut, can you put a thin fret saw blade there and cut them off?
@meismagiic4779
5 жыл бұрын
Finally good locks I can get from not online
@kawasaki000000000000
5 жыл бұрын
I had a similar style lock and lost the keys for my trailer. I drilled the lock through the key hole and also through the face around near the top where the pin turns and locks into the board at the top. And boom your open took about 30 mins
@aaronjuarbe
3 жыл бұрын
I can almost bet that still packaging made that price point shoot way up
@james-p
3 жыл бұрын
"No complaints there." = Top of the Line Lock! lol
@cernovlasy
3 жыл бұрын
I don't understand what the point is of having a strong steel core and a thick chain if the plug is the typical weak 6-pin that you can open with a standard tension wrench and hook. I might be missing something or I'm too stupid to understand, but to me this seems like taking two pieces of indestructible vibranium and tying them up together with a rope.
@straightpride451
3 жыл бұрын
That pretty blue lock looks good enough to eat.
@Francois_Dupont
5 жыл бұрын
the little pins that hold the chain could easely be grinded off with a disk.
@jbdragon3295
5 жыл бұрын
Francois Dupont What little pins? You have no access to the pins as they are under the lock head and the chain it’s self us in the way.
@jonwright6661
3 жыл бұрын
It looks like you could slide a bypass pick through the open back key way and turn open the lock. Kind of like American lock. Is it possible?
@PacificLockCompany
3 жыл бұрын
Jon, bypassing our UCS™ locks using this method won't work. The back of our cylinders marries up with a slotted driver and restricts the rotation of the actuator without the core being turned- which means the shear line needs to be made. In our non-UCS cylinders, we also fixed this issue that American locks had by changing the position of the half-moon on the back of the cylinder. Now there is no free space to rotate the actuator without creating the shear line.
@scottelly2
3 жыл бұрын
O.K. Mr. Woolsey, thank you for showing us this interesting Home Depot add. ;)
@shawn98ag2
3 жыл бұрын
This chain lock is cheaper than the Krytonite bike lock. I'm thinking it might work for my bike!
@sandraleepitts
2 жыл бұрын
Gonna get one for my gate, and Vespa . Trying to have 4 different but quality ones to rotate , on the gate , and all the rest on the scooter. I have 2 houses in my neighborhood that scooter thieves are operating out of . They stole my older vespa in June. I followed one, riding my scooter , and took it away from them a month later. It was hot wired, and the guy on it opened the seat, with a steak knife, and grabbed all his saws and picking blades out , dumped them in the backpack with all his bolt cutters and ran away. The struggle is real
@dragonhealer7588
5 жыл бұрын
So much thought and care went into these products, one might suspect LPL had a hand in it..... Im glad to see someone addressing the working class budget lock needs in America, this has been a near vacuum for years.
@paclockpres.9805
5 жыл бұрын
Well, I guess you could say BB and LPL had a hand in it... and so did lots of other LockSporters... and so did lots of locksmiths... and lots of our customers. We have been listening over the years and making changes/improvements to our locks as we went along. What you're seeing today is kind of a culmination of a lot of that hard work. But to answer the question, "no" they weren't involved with building these.
@cpmenninga
5 жыл бұрын
These are “working class budget locks?!”
@dragonhealer7588
5 жыл бұрын
@@cpmenninga Yes. I don't include $10 ”locks" that can be raked open in 3 seconds with a bobby pin by anybody, or hit with a hammer and pop open.
@jbdragon3295
4 жыл бұрын
Still not a single one of these at any Home Depot I’ve been to.
@PacificLockCompany
4 жыл бұрын
Home Depot's still got us in a "trial run" since we're a new product. Being a large corporation, they move a bit slower than we're used to! That being said, we're in 30+ stores in CA, AZ, and FL. We've got a map on our website and you can also see them on HD's website: www.homedepot.com/s/paclock?NCNI-5
Пікірлер: 1,1 М.