This video shows how to replace the seat belt buckle receptacle on first generation Rav4's ('96 - '00). If you're interested in disassembly of the buckle, check out the link below.
Timestamps, Part numbers, Torque values:
01:00 Remove four trim pieces
02:26 Remove four seat track bolts (14mm)
03:21 Remove the seat from the cab
04:05 Remove seat trim (two Phillips screws)
05:44 Remove the old belt buckle/receptacle
06:08 Compare the old and new buckle (Toyota part 73230-42050-B1)
07:11 Install the new buckle (torque is 32 ft-lbs)
07:23 Re-install the seat trim piece
08:30 Re-install the seat to the cab
09:15 Re-install the seat and four bolts by hand
09:42 Check the seat track alignment
10:59 Fasten the four bolts (torque is 27 ft-lbs)
11:42 Re-install four trim pieces
12:48 Note about cleaning the seat belt strap
Link to a video on disassembly of the seat belt buckle:
• Toyota Lexus Scion Stu...
I hope this video was helpful for you - thanks for watching, and good luck with your repair!
Негізгі бет Тәжірибелік нұсқаулар және стиль '96 - '00 Toyota Rav4 Seat Belt Buckle Receptacle Replacement (Similar on many other Toyota, Scion)
Пікірлер: 22