I love how you dive right into it with no fear. I know people who are scared to change their own battery.👍🏽👍🏽👍🏽
@JohnDoe-um8rz
6 жыл бұрын
found you while searching and I have to say you have made a great detailed video that shows every step and why and is 1000x better than Haynes or any other book or instructions I have found.
@JoseFlores-rs3yh
7 жыл бұрын
MRFABIO, this was a fun video to watch. Don't sell yourself short. You definitely are mechanically inclined and seems like you've done this before. Even though you didn't record everything it's still 100 times better and easy to understand than most videos on here. Great quality and good editing. It's good to see how you started and ended with good results. Thanks for making the video my friend.
@WesTheDeal
5 жыл бұрын
I agree 100%. Great video
@pirihern9329
Жыл бұрын
Just do it. Great confidence.
@Thepurpleguerrilla
2 жыл бұрын
For anyone needing additional help. I did this swap on my 1998 Honda Accord ex f23a1 with baxa trans to jdm f23a1 mgpa trans. Super easy. I used EVERY sensor off my old eng/trans on the JDM motor/trans, some sensors are the same, some are not. Doesn’t hurt to swap all of them even though I think the only ones you NEED to swap are the transmission sensors. Used the intake and exhaust manifold off the bad engine. Powersteering pump on JDM motor has a 90 neck on the inlet pipe. you can use it but it’s gonna take lengthening your old hose or just using your power steering pump off your old motor. Make sure you use Honda brand DW1 transmission fluid. If you’re reusing your old radiator make sure you flush the trans lines and part of radiator that the trans fluid runs through. I added an inline transmission filter and a transmission cooler, you don’t need that but it can only help. Make sure you have good ground connections. I made a few of my own and hid them. Battery to block, block to frame, frame to body, Battery to body, blah blah blah. Change your timing belt on your new motor before you put it in. And when you get done with all that. drive the car. Get it up to operating temp. Put it in park. Turn all lights and accessories and hvac stuff OFF. then rev the engine to 3000rpm and hold it there for 5 mins. To let everything relearn/reset. My Speedometer is slightly off due to the jdm transmission having different gear ratios. No check engine light and running like a champ.
@DarianYelton
7 жыл бұрын
Very in depth I like how I got to see everything. Actually learned a few things watching this thanks man!
@themrfabio2459
7 жыл бұрын
Darian Yelton no problem bro
@MauriceJohnson1131982
4 жыл бұрын
Thanks man you really helped me take my engine out my Honda. Keep up the good work and hope to see more from you!
@jamesdavid1106
7 жыл бұрын
I am doing the same swap soon with a JDM engine. This video was very helpful in planning.
@2rogerflores
6 жыл бұрын
my accord is burning mad oil! im so glad you made this!
@westsidedavie
4 жыл бұрын
I have a 98 accord 5 speed.same issue .soon as I get the money I'm buying a complete rebuild kit and then seeing about the valve seals as well
@HMOOB-nm3su
7 жыл бұрын
Good video MR Fabio... I mean a lot better than any other videos in here
@outbackdiecast6730
5 жыл бұрын
Great job man!! I'm actually pulling my trans sat morning to change clutch and rear main so watching a few videos just to get familiar. 01 accord, 247k on original clutch. It's finally slipping bad enough it needs changing. My car is very clean and motor runs great so as u said, I just can't junk it!! I'd rather just try do it myself, damn sure not paying anyone... timing belt wp soon to follow
@nialljamesbuckley
8 жыл бұрын
this video is awesome! thanks for taking the time to do and post this. you rule bro!
@themrfabio2459
8 жыл бұрын
👍👍
@mauriciochavez914
3 жыл бұрын
Those were known to have trany problems but the motor are great
@MILO20121
4 жыл бұрын
Thx u and all those u tube people who take their time for people like me. I appreciate u all from my heart
@themrfabio2459
4 жыл бұрын
Pleasure is all mine brother
@WesTheDeal
5 жыл бұрын
Great video bro, thanks for taking the time to make it. I learned a lot
@christopherelrod8788
7 жыл бұрын
The lower balljoint can come off super easy loosely have the castle nut on the bottom jack up til the suspension compresses and stick something metal inbetween the knuckle and lca then lower the jack
@oldsklteg
2 жыл бұрын
When you could buy an Exedy clutch kit for $99. Good times..
@stacypark2072
5 жыл бұрын
If you use liquid wrench and then heat the the bolts it makes it easier to loosen.
@jcmendez21
16 күн бұрын
extremely helpful video.
@khmerboy31329
7 жыл бұрын
very creative with the engine removal. my rear mount is also a pain right now
@Inviting1word
4 жыл бұрын
Thanks I am looking a honda just like this for 500 you made me dicide to go with it
@MLFranklin
5 жыл бұрын
Congrats on a successful project. Your video is really helpful, too. We're about to do a similar swap because of burned engine valve (I think).
@themrfabio2459
5 жыл бұрын
Let me know if you have any questions
@xan_carman4216
2 жыл бұрын
I’m in New Hampshire and I’m doing the same job right now
@dhanushka931
3 жыл бұрын
SWEEEEEET!
@PolarBearSushi
4 жыл бұрын
Man, I miss New England, besides the rust.
@alexandersmith6084
Жыл бұрын
Good job guy Alex checking in Memphis
@m.i.g5362
8 жыл бұрын
Yea I see that going to try this weekend hopefully let's see
@edwinrosas1706
7 жыл бұрын
learn alot thanks great video
@brandonbeckett5013
2 жыл бұрын
Thanks man your awesome
@thegenrl
2 жыл бұрын
thanks for posting
@yoifisher8193
8 жыл бұрын
Thanks bro this helped a lot
@Im_not_playing_
2 жыл бұрын
Thank you
@m.i.g5362
8 жыл бұрын
I want to do the back motor mounts but don't know how to
@themrfabio2459
8 жыл бұрын
with the engine in they are very hard to do because they get rusted in .
@Polodadon305
7 жыл бұрын
Nice video 👍🏼
@crystalmontanez4694
7 жыл бұрын
how different is this than an automatic?
@jackjacke4654
5 жыл бұрын
Where are you from with the old school Italian accent? You in little italy in nyc? Wondering, you just don't hear that slange no more....I'll be doing mine very soon myself thanks for all you show, N know. Hey!
@themrfabio2459
5 жыл бұрын
Boston Massachusetts
@jackjacke4654
5 жыл бұрын
@@themrfabio2459 Oh yeah, my sisters girl friend lives in Mass. Shes blown me away with her accent a few times.
@scottymsu6063
4 жыл бұрын
I got the New England accent...
@nobodyspecial3325
6 жыл бұрын
nice video and job
@rebirth_mishap
Жыл бұрын
can you find your khakis?
@utkarsh436
7 жыл бұрын
what was the code at the end that it threw?
@themrfabio2459
7 жыл бұрын
Utkarsh Raj broken knock sensor. the green round sensor next to oil filter
@JoseFlores-rs3yh
7 жыл бұрын
👍👍👍
@crystalmontanez4694
7 жыл бұрын
Also is that a v6 3.0
@kevinmartinez9354
7 жыл бұрын
Crystal Montanez I4 2.3
@crystalmontanez4694
7 жыл бұрын
kevin martinez damn I was doing a v6 3.0 but didn't know the replacement I bought was out of a acura cl. there's only one difference but it is making my life complete hell. Park Nuetral safety switch on the accord tranny is on the casing on the cl it is on the shifter.
@richielyons2464
5 жыл бұрын
wats the d light flashing anybody no y and how to fix it
@ericb2662
5 жыл бұрын
@richie lyons check transmission fluid. You may be running low
@MrJoan508
7 жыл бұрын
motor oil for the transmition?
@themrfabio2459
7 жыл бұрын
Officer Joan yes
@HondaSolutions
7 жыл бұрын
It's not recommended for long term using 10w30 motor oil instead of Honda MTF will result in shifting issues with your syncros, especially increased wear. Better to use ALL HONDA fluids in Honda cars.
@eksine
6 жыл бұрын
This is the most hack, unsafe way imaginable. Shit just make sure the trans fluid isn't low and this wouldn't of happened in the first place
Пікірлер: 62