Just about to under go this fun job. Wanted to thank you for the heads up for the upcoming headache and how to make it less painful 👍
@LastFrontierGarage
5 ай бұрын
Thank you! Glad to help, hoping things go smoothly for you!
@RXY7
2 жыл бұрын
Thank you for the video, I have the same problem. The oil line is leaking from somewhere under the bumper. 👍
@LastFrontierGarage
2 жыл бұрын
Glad you enjoyed it, let me know if you have any questions, it’s probably the o-rings leaking at oil filter adapter
@RXY7
2 жыл бұрын
@@LastFrontierGarage thank you Last Frontier. Do you know if those o-rings can be replaced or I have to replace the whole oil lines assembly. 99 ford expedition 5.4L 2valves 4WD serial L Windsor. By the way I bought it in 2017 and I had flushed the coolant about 30 times to then replace the radiator. and the heather cores still get clogged. This time I'm going to flush ot from the engine block drain plug. Thank you so much.
@LastFrontierGarage
2 жыл бұрын
@@RXY7 you have the oil filter under the driver side front bumper correct? The lines do bolt up to part that you screw oil filter on to; I didn’t have much luck finding the individual o-rings as a listed part, we had to match them up from a o-ring/gasket variety pack. Let me know if you find the specific o-rings, would like to have more of an OEM fit.
@TattedTommysTv
2 жыл бұрын
And thanks for the video brother really helped me understand what I'm getting into to
@LastFrontierGarage
2 жыл бұрын
Glad it could help Tommy !
@elyeli6250
3 жыл бұрын
is there any way to delete this system and go back to the standard filter on the block? it is a really big inconvenience to have to reach behind the fender to do oil changes
@LastFrontierGarage
3 жыл бұрын
Hi Ely, I believe it might be a possibility, I’m not sure though would have to do some research. Your best bet might be to call a local Ford dealer and see if someone in parts has any info on it.
@SanchoGracie
Жыл бұрын
My 97 4.6 Roush F150 had the oil filter attach easily under the motor too. Everything about the 5.4 2V are a giant PITA.
@hubertpereira5808
5 ай бұрын
Friend, where can I buy the parts for the pipe and the adapter or filter housing. which website thank you
@LastFrontierGarage
5 ай бұрын
Hi, could you be more specific? If you can let me know the time of the video where it shows the parts you’re looking for and I can let you know. This was a while ago and need to jog my memory, some of the o-rings were just general o-rings that matched up with the size that came off for example
@hubertpereira5808
5 ай бұрын
from the minute 14:17 Engine oil cooler line hose, and oil filter housing Ford f150 1998 5.4 V8.
@LastFrontierGarage
5 ай бұрын
@@hubertpereira5808 I got this part from a local parts store called O’Reillys. I’ll try to look around to see if anything is available online. Where do you live?
@hubertpereira5808
5 ай бұрын
Thanks Bro Rice Lake Wisconsin
@LastFrontierGarage
5 ай бұрын
Here are the lines that fit a 1998 Expedition 4.6 www.amazon.com/Dorman-625-201-Oil-Cooler-Line/dp/B001C6L5NW
@TattedTommysTv
2 жыл бұрын
I'm dealing with same issues I thank I'm gonna run my hoses underneath the power steering line seems Ford dropped the ball on installation from the factory don't see any reason we can't just run them under the steering line and Def a headache to mess with mines damn near wore a hole through my steering line to
@peepeepoopoo69420
Жыл бұрын
Can you please find the part number I'm going crazy trying to find it
@LastFrontierGarage
Жыл бұрын
Are you referring to the adapter itself or the gasket? The adapter itself seems to be very hard to find, have you called a Ford parts dealer to see if they know anything?
@marshmower
2 жыл бұрын
Well mine has a sending plate where yours bolts to the adapter but mine has the cooler sandwich too. Now it makes sense. They used a large Allen hex bolt I'm assuming it's 14mm (I hope!). There's about 2.6 inches between the bolt and the frame. I heard someone say in a forum that they cut about 3/4" off an 14mm Allen key and stuck it inside a regular 14mm 6 pt wrench and that gave them a much lower profile for attack.
@LastFrontierGarage
2 жыл бұрын
Nice, thank you for the tips!
@kitt199546
4 жыл бұрын
Any clue what size o rings the lines have on them?
@LastFrontierGarage
3 жыл бұрын
Crown Vic Metal Detecting hi there, just now seeing this, no unfortunately I do not.
@deeka864
Жыл бұрын
Did it fix the problem?
@LastFrontierGarage
Жыл бұрын
Hi deeka, thanks for watching yes it sure did. The next video was flushing the coolant system after locating and fixing the leak which took quite a bit of effort to get all the oil out. kzitem.info/news/bejne/1aB9y2x-jJ99pno
@derrick6112
9 ай бұрын
Was your puppy holding the camera?
@samcro_reaper420psn3
3 жыл бұрын
What is the manufacturer name and/or part number of the oil filter adapter? I need the whole part that connects to the block. Having a hell of a time finding it
@LastFrontierGarage
3 жыл бұрын
What year, make and model do you have @SAMCRO_Reaper420
@LastFrontierGarage
3 жыл бұрын
@SAMCRO what engine size and do you have the remote oil filter under driver side bumper?
@samcro_reaper420psn3
3 жыл бұрын
@@LastFrontierGarage it's the 4.6l. In my '98 Expedition. My oil filter is relocated to underneath the front bumper. The part I need is, in fact, the one in this video. I just cannot seem to find it
@LastFrontierGarage
3 жыл бұрын
Gotcha, yep that would the same part I would need if mine got messed up; I’ll do some digging and get back to you
@samcro_reaper420psn3
3 жыл бұрын
@@LastFrontierGarage Thank you!
@felixsanchez7090
3 жыл бұрын
I have oil in the coolant but no visable leakage could this be the problem?
@LastFrontierGarage
3 жыл бұрын
Felix Sanchez what year do you have? If this part is original on yours there is a high likely good that it is the culprit. Very common on these. Mine has about 150,000 miles and was original and it indeed was the fix.
@felixsanchez7090
3 жыл бұрын
@@LastFrontierGarage it's an 02 5.4 yes all original ok I'll try that thank you
@LastFrontierGarage
3 жыл бұрын
Felix Sanchez let me know how it goes!
@tedkay3750
3 жыл бұрын
replaced my oil cooler lines 98 expedition yesterday! easy , took about 1 hr tops. you do everything from under vehicle. line that attach to oil filter has one bolt on filter side and the tricky one behind filter. the two bolts at oil cooler, kinda tricky , you just need swivel socket and a small extension and fish it through to bolt to remove top and bottom bolt. need a small container to catch a little oil once you disconnect lines. replace with new one's. don't over tighten ..aluminum fittings. 1 st time i replaced mine lasted a little over 4 yrs....i think. bottom line very easy job.
@LastFrontierGarage
3 жыл бұрын
Awesome stuff Ted!!
@Rahvinfyr
3 жыл бұрын
Just looked at my own lines and found this video to see what it's going to take to do this job. Cant see through all the oil caked on mine yet so I'll be back.
@LastFrontierGarage
3 жыл бұрын
@@Rahvinfyr good luck man!
@derrick6112
9 ай бұрын
If you had taken the camera and just run down the street with it, the video would have been 100% more informative. What a crazed up fruit loop.
Пікірлер: 49