Thanks man I needed this. Bought a mustang with the same window problem, took it to my window guy and he said $300 for a factory Ford window with lifetime warranty. I think ill try this $7 fix first lol. Thanks again.
@alexwinton1982
3 жыл бұрын
kin
@johnm.8742
4 жыл бұрын
Great video on showing steps to fix window. My factory glue let go and window is crooked. I'll try the glue that you used, with good results. Thanks a lot!
@SpinnGuitar
4 жыл бұрын
Awesome thank you for this really. I had the exact same thing drivers side front had fallen off passenger side rear. Excellent video
@CodyP2000
3 жыл бұрын
Pretty much what’s going on with my 01 Mustang GT. Heard a loud pop when the window got stuck and the rear window track on driver door broke off. It’s currently free spinning with only the rivet holding onto the metal bar. Gonna try this and see what happens :)
@Terrafire34
6 жыл бұрын
I love my mach 1 but Jesus these plastic door panals are so damn cheap it's why the Europeans make fun of our quality
@MrIlikevideos24
6 жыл бұрын
Its all damn cheap especially those window brackets lmao. They took a dump on my window too now they need to be "glued" back... *cough* cheap *cough*
@scooter8187
5 жыл бұрын
These door panels are a joke. Plastic on the mounting cups is cracking and the pull handle insert won't stay attached to the panel at the top. Ford should still be embarrassed by these 14 years later.
@tinamckeage6665
3 жыл бұрын
Thank you for this video.My my widow the 1st bracket is my problem and the window roppid off the metal piece and window is in the bottom of my door.I am so bummed out.Anyway nice mint Mustang like mine exept the window.
@suzintru1
6 жыл бұрын
Good vid. If I can add some advice. Before doing this, make sure your door hinge/pin assemblies are tight and not worn out. This will cause the door/window assembly to droop down, and misalign. That and your door latch striker plate should also be properly adjusted. Worn hinge pins are a common weak spot on these doors (like mine were). Just saying.
@2004dsgmach1
6 жыл бұрын
Paul Mark good advise
@BobbyDD21
6 жыл бұрын
The rear side of the front drivers window on my vert seems to be misaligned and adjusting the bump stop is not fixing the issue. I wonder if this has something to do with it? If the door is closed though I don't see how the hinge/pin would cause a window misalignment. It seems like the door dragging would just make it harder to close, but once closed I don't see how the door could still be drooping.
@scooter8187
5 жыл бұрын
Great video! I tried this repair with 3M WindowWeld and it didn't hold. I'm going to try the Permatex stuff used in this video.
@2004dsgmach1
5 жыл бұрын
Scott B permeated stuff works best from what I’ve found.
@oscar.v5859
9 ай бұрын
The track that holds the glass fell off the scissors axle should I get a new track
@davidbranham22
3 жыл бұрын
To help with the bracket staying on for longer time, try reinforcing with a zip tie for the rear bracket of each window (driver/passenger). This is because so much torque being applied on by not the best window track design. See additional link -> kzitem.info/news/bejne/tY-q16egpox-aJg
@ferniee16
7 жыл бұрын
Good stuff!! I was having this same issue... and, it was exactly this.
@2004dsgmach1
7 жыл бұрын
ferniee16. Thanks man. Ya it's pretty common on these cars
@leemoknows
7 жыл бұрын
Before you fixed this on your Mach, did you have a rattle inside the door when you closed the door, only when the window was down?
@2004dsgmach1
7 жыл бұрын
azurebluemach. Yes I did but mine would also rattle at times when I hit a big bump. I found 2 bolts loose on the passenger side window track. If you skip to 6:36 you can see the 2 gold bolts that were loose on mine. I'd remove the panel and Check all the bolts for tightness. Rattled like that for years until I accidentally noticed it when removing the panel and now it's solid. Good luck
@leemoknows
7 жыл бұрын
2004dsgmach1 Thanks man! Gonna check that out. Much appreciated. 👍🏼
@davidw7531
2 жыл бұрын
Has the glue held up? Trying to get the same situation addressed, but it only takes a few door closes to end up separated again.
@2004dsgmach1
2 жыл бұрын
Yes sir. 5 years strong
@keanar2054
Жыл бұрын
Same exact thing happened to my 02 but my bump stop is also filled with broken glass from the last window that broke. Any tips on how to get the glue and glass out of the track piece??
@keanar2054
Жыл бұрын
I pried all of the glass out and it’s good as new
@sdragnut
2 жыл бұрын
Awesome Video!! Thank YOU!!
@martincruz5797
3 жыл бұрын
Como se llaman eso sujetadores
@nealrobert5755
4 жыл бұрын
Same problem with mine completely fell out of track i can roll it up and down with my hand...
@cburford2730
6 жыл бұрын
How long did this last? I’m kinda scared to just use the silicone sealant, I’ve heard it’s better to use the urethane which is like $25/30 a tube
@2004dsgmach1
6 жыл бұрын
cburford 1st time I did it on the driver side in 2012 and it’s still working good. This time it was the other glass support that separated
@cburford2730
6 жыл бұрын
2004dsgmach1 I have both of the same issues you had in the video! Maybe I’ll return this $30 tube and get the other stuff for $8 lol
@regioexas
6 жыл бұрын
I did mine 6 yrs ago and I just have to re apply silicone again today
@2004dsgmach1
6 жыл бұрын
I see your name. Must me a damn Texas thing lol
@CancerJake
6 жыл бұрын
Hey man I need help ASAP. I have the same issue on my 01 cobra you had on the driver side and due to the Florida heat that exact piece fell off mine. Where exactly did you put that piece on the driver side window ????
@2004dsgmach1
6 жыл бұрын
Sorry for late response. You just need to put that black piece exactly we’re it once was on the glass. There should be a clean area on glass we’re it was. That’s we’re it needs to be. Again let me know
@CancerJake
6 жыл бұрын
2004dsgmach1 yeah I know it has to go back on the glass . Do you have a picture exactly where? Thanks
@2004dsgmach1
6 жыл бұрын
theclutch3 skip to 7min 50sec. It what the spot your talking about? Does your have a “clean” sport like that on the glass?
@mrpremier4bbg
9 ай бұрын
That glue will fail !
@tyetrippen8775
2 жыл бұрын
What's the name of the part at the part store to ask?
@2004dsgmach1
2 жыл бұрын
Permatex windshield and glass sealant. 7:23
@steve_aintloud2994
4 жыл бұрын
Mine is too high in the front and too low in the rear, before i take everything apart, do you think its that same issue? I can also rock the window front and back, thats how i get it to seal actually lol when its closed i leave it a little lower so it doesnt catch and i push up on the rear side of the window to basically have it sit like it should. So that leads me to think its the glue issue
@2004dsgmach1
4 жыл бұрын
silvr_4v yes sounds like same issue. Seems like window is slightly above glue line or something, your on the right track.
@leemoknows
7 жыл бұрын
Nice! Good info 👍
@2004dsgmach1
7 жыл бұрын
Thanks man
@tizzlebaby_7598
6 жыл бұрын
anyone having this issue but with a rattle noise ? if so how did u fix ?
@2004dsgmach1
6 жыл бұрын
Tizzlebaby_ ya I had a rattle with big bumps and also a pop when operating the window. It ended up being the guide rails bolts were loose. Just make sure all bolts are tight when your in there
@Anonymous_Music
3 жыл бұрын
Damn Wanna trade Mustangs?
@AKWASHERE2015
6 жыл бұрын
I have a 2007 mustang and every time I drive with window all the way down it seems to rattle inside the door? Very loud. When the window is up it is fine... Do you think this is same problem or what? :)
@2004dsgmach1
6 жыл бұрын
AKWASHERE2015 possible the same issue. I had the exact same issue on passenger side a long time ago and during this repair I found out all the window track bolts were loose and obviously rattling. Bust off door panel and touch/move everything to ensure tightness
@AKWASHERE2015
6 жыл бұрын
2004dsgmach1 thank you! So all I have to do is remove the door panel trim nothing else? Only reason why I didn’t yet is that I was told there’s 2 layers ? :)
@2004dsgmach1
6 жыл бұрын
AKWASHERE2015 ahh not sure about the 2 layer thing but yes remove and give everything a good wiggle and also shut the door while sitting inside and trying to look for what’s rattling
@Floresbrandon95
6 жыл бұрын
What is the name of the color of the paint on this car??
@2004dsgmach1
6 жыл бұрын
Brandon Flores. Dark shadow grey
@JonRodGod
5 жыл бұрын
Thanks for the video, but what’s up with the silly ass music lol definitely could have done without it.
@2004dsgmach1
5 жыл бұрын
Jonathon Arms thanks. Thing with music is you have to go off the grid with the genre and type to prevent copyright issues. It works as a full in to keep people semi interested
@JonRodGod
5 жыл бұрын
Hey man I’m working on mine now my back window holder fell off of the window how to I get that slider off the track how you had yours ?
@bkgarage6658
6 жыл бұрын
My window is stuck off track. Help
@2004dsgmach1
6 жыл бұрын
Baseballkid18 if I jumped off the tracks you may need a whole new regulator. Pretty cheap from LMR.con
@bkgarage6658
6 жыл бұрын
2004dsgmach1 it moves up and down a little but it’s off the track and the seal on the outside came off
@kyleblum6018
7 жыл бұрын
what kind of wheels did you put on your mach?
@2004dsgmach1
7 жыл бұрын
Kyle Blum. These are fr500 wheels. Got them from American muscle front 18x9 and rear is 18x10
@kyleblum6018
7 жыл бұрын
All I can find are chrome finished fr 500 wheel sets. Can not find black chrome. Do they still sell them?
@2004dsgmach1
7 жыл бұрын
Kyle Blum. Ok I saw the same thing. Only other option is wheelreplicas.com. They sell some currently but there brand has always been a little bit of a darker black chrome. Do a few searches and you should be able to see what I'm talking about before you buy those thinking they'll look exactly like mine
Пікірлер: 66