I did this on my 2005 1500. Bought one of those aluminum (30% lighter...yeah...maybe), floorjacks at HomeDepot, sprayed the bolt with Kroil (highly recommended by a guy at work), once in the morning and once after I got home from work for a week, and used a "breaker bar". It worked perfectly! The height from the ground to the middle of the front wheel-well on both sides is exactly 36 1/4" each and my truck sits level. Thank you for the how-too!
@PETERTHEMAN445
Жыл бұрын
You a real one for going out In the snow and showing us how to do it 🔥🔥☝🏻🙌🏻🫵🏻🫡👍🏻
@yamaharacer5579
2 жыл бұрын
Thanks I never knew. I got an '04 Z71 Suburban 4x4. Turned mine all the way up and then backed off half a turn. Rides a lil more ridgid in the front but looks better! I'm a first timer thanks to your video!
@603Mechanicvids
2 жыл бұрын
I'm glad my video helped you out, just make sure you get an alignment now, thanks for the comment 👍
@Wil-pi3vz
4 ай бұрын
How much higher did you raise it?
@davejalenderki
2 жыл бұрын
Awesome video. And in the snow as well. Thank you for the time you put into making it and sharing.
@603Mechanicvids
2 жыл бұрын
👍 I appreciate the positive comment thank you
@jewllake
3 жыл бұрын
I love that he uses jack stands and he's working in the snow!
@TheUndertoe
3 жыл бұрын
That shows he is smart! Unlike most people
@sshoel
3 жыл бұрын
@@TheUndertoe White Americans...
@TheUndertoe
3 жыл бұрын
@@sshoelracist much?
@palerider55
2 жыл бұрын
You do realize that after you change the front ride height, you should get the front end alignment checked, because your camber angle has changed.
@benmcbride6956
6 ай бұрын
I recently got new torsion bars and shocks, took it to a shop and they leveled out my truck and gave it an alignment. The shocks settled and lowered the front end just slightly, if I adjusted it to be level again would I need my alignment checked again?
@timmcgrath6496
3 ай бұрын
Yes
@kevinbrown8497
4 жыл бұрын
I'm going to recommend that you use/rent a torsion bar adjustment tool to take the tension off the bolt first. It's safer that way and you're less likely to strip the threads.
@MrAtrice
3 жыл бұрын
or possibly break to bolt in place especially if its so corroded its integral strength is greatly depleted
@jaydanpettegrew7758
3 жыл бұрын
@@MrAtrice if your smart enough you’ll soak the bolt completely with spray and let it set for a couple hours or a day if you have the time then do it. That’s what I did is much better on the bolt
@frankrizzo5659
3 жыл бұрын
@@MrAtrice hell my friend...heat is your friend...if it seems tight like its gonna break, stop and heat...keep trying and keep heating eventually it will start to turn smoothly then you know you used enough heat...hope that helps lol...that trick works for just about everything
@jerryg3578
2 жыл бұрын
In summary: 1. (deep creep)! soak it and come back later 2. Heat will set you free (don't set the penetrant on fire)
@chizzelfingers
Ай бұрын
not needed. they were designed to be raised or lowered exactly like he did it. he does however need an alignment soon. but it's fine what he did. btw where's your video????
@ELMACHETERO.40
2 жыл бұрын
thanks buddy i got a 2002 chevy silverado 1500 and i was wondering how to lift it from the front great video helpful
@603Mechanicvids
2 жыл бұрын
Thanks for the comment 👍 I'm glad it helped you out
@smnnjr4378
Жыл бұрын
Soooo....i came across this video BECAUSE i was looking to see WHY my truck didn't have any coil springs. & find out as i did some research that any marked as 4wd/4x4/off road vehicle will not have springs but have torsion bars. To my surprise, i didn't know what they were BUT i had seen them & never knew what they were (felt very dumb after that). So that's how i ran into this video. Liked 👍 the video by the way on how simple the adjustment was done. Had a truck before now than 10 yrs ago & was never too into customzing or upgrading my truck & now i got another one after looking for So many yrs. But now I'm interested in taking care of my truck pretty good & finding out new things that i should of known back then lol So now here comes some more dumb questions for my own education. Lol why is the adjustment done, what does it do? & how often are we to do that? This adjustment will only make the FRONT wheels adjustment? Or back also? Is this in place of putting LIFTS on the front suspension? My truck has a back lift of about 2in i believe (might be a 3in lift) so would i need to change the lifts from the back if the adjustment lefts it at the same level as back? Plz excuse my ignorance but i am interested in knowing about this torsion bar adjustment and more. Thank you in advance.
@dltdaviddlt4074
4 жыл бұрын
Very helpful, thank you, i just bought a chevy 2002 and the front is way lower than the back, hopefully this solves the problem.
@603Mechanicvids
4 жыл бұрын
Sorry for the late reply, hopefully it helped you out man
@TheUndertoe
4 жыл бұрын
Be careful don’t max em out you’ll need an alinement
@The_Real_Indiana_Joe
2 жыл бұрын
Shocks help that too.
@misaelcruz4947
7 ай бұрын
Let Us know if this help on your 2002, I have the same thing going on with my truck.
@ShinyKnife
2 жыл бұрын
I was thinking you needed a breaker bar. But you got it done like a boss with a standard Ratchet. If I decide to do mine I’ll use a Ratchet. Probably wouldn’t notice it’s getting ready to break with a breaker bar.
@letgodbetrueandeverymanali3656
2 жыл бұрын
Make sure it's off the ground first, that's why he didn't need a breaker bar for leverage. Too much torque if it's on the tires.
@nano-gq9tv
Жыл бұрын
I did it with a 1 foot long rachit for 1 of my buddy's. It was all I hade every crank😂 I'm 125 lbs so I'm not really big😂
@craftman5632
3 жыл бұрын
You should measure the driver side too, make sure it's the same height on both sides. sometimes you have what they call the Chevy lean.
@letgodbetrueandeverymanali3656
2 жыл бұрын
It's leaning because of the fuel tank I believe. That's what I found in a quick search... 👍
@craftman5632
2 жыл бұрын
@@letgodbetrueandeverymanali3656 yeah but wouldn't the rear driver side be leaning too if that's the case.
@letgodbetrueandeverymanali3656
2 жыл бұрын
@@craftman5632 Yes, depending on which side of the tank is overhanging more than half center of the vehicle, it might even be perfectly centered I'm not sure, haven't specifically looked for that but Sunday I'm changing out all my transmission Solenoids, located.under the trans pan, and I'm going to look while I'm under there. Or maybe someone here already knows? 👍
@craftman5632
2 жыл бұрын
@@letgodbetrueandeverymanali3656 the gas tank is right behind the driver's side cab and just before the rear wheel. But anyway my truck has 130,000 miles on it, I'm going to replace my front shocks, and steering stabilizer, maybe my front shocks are bad that's why it's leaning, it'll be a few weeks before I get to that but I'll reply back if that was causing it to lean.
@letgodbetrueandeverymanali3656
2 жыл бұрын
@@craftman5632 Thanks for the info Brother. Yeah, let me know if new shocks fix the issue.
@davebanach9891
2 жыл бұрын
My 98 has the torsion bars cranked all the way, it’s got no suspension in the front so I gotta bring those down, thanks for the video man
@603Mechanicvids
2 жыл бұрын
No problem glad it helped you out. Thanks for viewing
@great2c4me
2 жыл бұрын
Dave, same here! My truck I just bought, the trans axles are maxing out vibrating over highway bumps and I gotta bring her down... did you lower yours? Are you experiencing any inner tire wear from lowering?
@rickn8or
2 жыл бұрын
I'm giving you a thumb's up just for doing that barehanded and bareheaded in the snow.
@603Mechanicvids
2 жыл бұрын
I appreciate that. It was cold for sure but its a pain using gloves while working on the vehicles
@srdamman
Жыл бұрын
Nice explanation. I just had this performed at the local shop (added the alignment part) on a 2002 Tahoe Z71. The front end came up 2 inches, now only 1.5 cm lower than the rear. The goal with the level was to get the Tahoe ready as a lite overlander.
@austinmillwood8426
3 жыл бұрын
Thank you was extremely helpful in leveling my truck
@davideoverman
2 жыл бұрын
Don’t forget to get an alignment afterwards! Or so I’ve heard, haven’t actually done this yet
@sevenmalards
Ай бұрын
Anytime you adjust the torsion bars you have to drive around the block and come back THEN measure. If you measure right off the jack the suspension isn't settled.
@letgodbetrueandeverymanali3656
2 жыл бұрын
I did mine all the way, they were almost there anyway. My truck rides better now, next upgrade are rancho shocks with a 3 in front lift and 2 in...in the rear.
@hayzersolar
10 ай бұрын
just started watching, working in the snow awesome
@YoungGearHeads
Жыл бұрын
Thanks we just finished all the front suspension bits, so on to the ride height adjustment.🙌🏻
@bikermike
3 жыл бұрын
Good video bro! Thinking of doing this for about 1/2" of lift and replacing my jounce bumpers to hopefully restore a bit of ride quality back into the front end. She's sagging a bit after 15 years hahaha..
@603Mechanicvids
3 жыл бұрын
Thanks bro. Do it up, it should definitely help out for sure
@just_isaiah1367
3 жыл бұрын
Mine is sagging 3 inches after 17 years
@richweir5186
2 жыл бұрын
You need to back the truck up about 50 ft then pull back in to measure.
@Alwayz_Angry
6 күн бұрын
if anyone could answer this that would be appreciated, how many inches can you lift with the stock torsion key?
@marklennox2151
3 жыл бұрын
Thanks for posting this. My 2000 Chevy Astro AWD is sagging on the driver's side and I'm hoping this helps.
@abc80s74
4 жыл бұрын
How do lift the rear I have 2002 Chevy Silverado 2wd it was sitting on 22" rims and was lowered 3" now have the stock rims and tires it is real bouncy I want to re lift it to stock height
@603Mechanicvids
4 жыл бұрын
You will have to replace the rear leaf springs with oem ones. That will fix the problem.
@jstone3402
2 жыл бұрын
My torsion bar on my passenger side is causing my passenger wheel to suck in when it should stick out which is causing me not to get a proper alignment. ANY CLUE OR IDEAS ? That can help me
@RubenGonzalez-nm2hf
3 жыл бұрын
Este bato no tiene frío , y aquí en Texas no aguantamos el frio.🥶
@blakej4452
Жыл бұрын
Great Video!! I'm sure I can do this on my own now. Thank you!
@603Mechanicvids
Жыл бұрын
no problem, glad I could help out
@dailydrivensedans4875
Жыл бұрын
Standing it on the frame rails takes almost no weight off the keys. What you need is a torsion key tool too actrually take the weight off. Jacking it up is badically the same as just leaving the tires on the ground. Also if you tow you dont want the front raised any more then half of an inch or your braking and stability will be noticeably worse!
@dylanwaters8968
2 жыл бұрын
Tell me why I leaned back when you start spraying the pb😂🤦🏻
@tonyklafter2876
4 жыл бұрын
Glad more of a question comment I have a 2001 and it rains to the right about 3/4 of an inch how do I fix that.
@user-me6vk6ee1t
8 ай бұрын
Hi I have an 03' gmc sierra extended cab, im planning to switch from 245/70r17 to 275/70r17 without any leveling kit or do I need to do this method to prevent from rubbing the tire to the truck? Any suggestion is highly appreciated.
@ivantinoco2643
3 жыл бұрын
So, will this work if I use a matco rachet instead of a snap on?
@603Mechanicvids
3 жыл бұрын
Yeah
@Firebirds4ever
4 ай бұрын
A Pittsburgh Pro ratchet would be better, but Matco will do ok.
@momnahmed4175
8 ай бұрын
can you make a video on how to adjust the height for rear wheels ?
@stelthcamo357
Жыл бұрын
Will this make the truck run smoother I put new shock on I can feel every bump in the road
@TimothyEakin
2 ай бұрын
thanks dawg so helpfull
@achilles1373
3 жыл бұрын
Love PB Blaster. Does undercoating help in your area with rust prevention? I live in GA so we really don't have that issue.
@603Mechanicvids
3 жыл бұрын
Yes pb is amazing. Yes undercoating is definitely needed in NH, they lay so much salt down on the roads in the winter it just eats the vehicles up fast.
@marklennox2151
3 жыл бұрын
I bought my 2000 Chevy Astro from Georgia and it has absolutely no rust. I'm up in Connecticut though and they use a brine solution that absolutely destroys truck undercarriages. Way worse than salt. I'm going to go through a lot of cans of rubber coating. I'm thinking about Flex Seal.
@DM-qp7do
3 жыл бұрын
🇺🇲 He used jack stands so that tells me he's a smart guy, so I chose this video over dumbshits that crawl under a 5500lbs truck with just a floor jack. Thanks for the video man, it was fast, to the point and helpful 🇺🇲
@trucks_n_tractors_6335
2 жыл бұрын
You only need a floor jack really unless you have a gay truck it won’t crush you if it falls
@thomaskovacs4942
2 жыл бұрын
I use jack stands, but I jack the truck up with a scissor jack out of a Mitsubishi galant 😎😎😎
@shawnlewis5772
2 жыл бұрын
Could I jack the one side of the truck up instead of putting the jack in the middle and just do it side by side?
@603Mechanicvids
2 жыл бұрын
so sorry for the late reply but yes you can do it that way
@shawnlewis5772
2 жыл бұрын
@@603Mechanicvids no it's okay I'm patient just wanting to know so I'm not messing anything up😂😂
@603Mechanicvids
2 жыл бұрын
good to make sure before u just go for it. just make sure you do the same amount of rotations with the bolts on both sides
@shawnlewis5772
2 жыл бұрын
@@603Mechanicvids oh right the dude I bought the truck from torqued the one side bolt for the torsion key and not the other so I have to count my turns on the one side to get it level to the other so I can go from there
@fredobanny8842
3 жыл бұрын
Definitely looks better right away I'm sure another turn would equal it out..
@Meme-zc4cw
2 жыл бұрын
Does this wear out your torsion bars quicker?
@603Mechanicvids
2 жыл бұрын
No but depending on how much you adjust them it can put extra stress on your cv axles, id just do it to level the front with the rear. definitely will need an alignment as well hope this helps
@X4Anthony
3 ай бұрын
what happens if i were to loosen the bolt instead of tightening it
@603Mechanicvids
3 ай бұрын
it would lower the front
@X4Anthony
3 ай бұрын
@@603Mechanicvids thank you for the reply do you have an instagram i could possibly contact you on?
@DanielHunterUSA
10 ай бұрын
I have a 2006 Chevy Silverado that is lower on the passenger side what would that be ? It doesn’t have spring just shocks
@603Mechanicvids
10 ай бұрын
sorry for the late reply but it could be a worn out shock or torsion bar
@ronbailey4297
9 ай бұрын
Make sure you dont raise it too much as the lower control arm will hit the rubber stop
@miguelmejia1944
2 жыл бұрын
So what’s the max you can adjust I’m assuming 3 inches
@603Mechanicvids
2 жыл бұрын
I believe its 2-3 inches but I'm not 100% sure. you would be better off buying some type of lift or leveling kit instead of maxing the stock torsion keys out. The stock suspension components and cv axles wouldn't like all that stress.
@johnmills837
Жыл бұрын
Typical measured fender to ground. So easy
@fixtritephil7712
9 ай бұрын
Readjust headlights when done........
@LookInDJProduction
2 жыл бұрын
weather is not a problem if there is a volition
@sethjohnson2358
3 жыл бұрын
Are my adjusting bolts be uneven? I just looked under my 01 and the driver side is Screwed in pass the crossmember and the passenger in sticking out the crossmember ?
@MrRush240
Жыл бұрын
Mine are the same ! But ima see what happneds if i level them god bless and be carefull
@trevorhaaswyk8440
2 жыл бұрын
Keep up the good work
@morales1ist
3 жыл бұрын
Will try this, Thanks!
@coticadena7804
Жыл бұрын
Cool Cat. Good video.
@willbur5952
3 ай бұрын
Badass I know my project
@abc80s74
4 жыл бұрын
Thank you
@chrischamberlain3489
2 жыл бұрын
Nice job bro
@dadot1738
7 ай бұрын
About to do it to mine until I saw the bolt to crank was missing.
@603Mechanicvids
7 ай бұрын
damn, thats no good. id order a new bolt and get that in asap
@tonyklafter2876
4 жыл бұрын
What if you don't have torsion bars and you just have a rear wheel drive to 2 wheel drive truck with a 6-inch Lift how do you stop it from
@declineofthewest.
4 жыл бұрын
Yes, have some
@fredobanny8842
3 жыл бұрын
Imagine recording in the snow lmao
@serjkeshish7
3 жыл бұрын
Nice 👍,, but can I lower the 2002 Chevy Tahoe the same way the rest end seats to higher ?
@603Mechanicvids
3 жыл бұрын
Yes
@serjkeshish7
3 жыл бұрын
Thank u it worked mush appreciate it. Now I can’t take out sir from the rear air shocks ? Any idea how to deflate the rear air shocks i did disconnect the air hose from the shock ?
@great2c4me
2 жыл бұрын
@@serjkeshish7 did it mess with the camber by lowering it? Are you getting inner tire wear on front tires now?
@timmcgrath6496
3 ай бұрын
And you need to get an alignment
@JulianFRosales
Жыл бұрын
How high can they go?
@natebmx2013
2 жыл бұрын
What size tires are these? And what is the wheel brand and dimensions? I like it!!
@603Mechanicvids
2 жыл бұрын
tires are 265 75 r16 and they're the dirt commander Centennial MT, wheels are black rock series 929 black jack 16×8 i believe the offset is +13
@natebmx2013
2 жыл бұрын
@@603Mechanicvids thank you!
@603Mechanicvids
2 жыл бұрын
no problem
@DarkTerritory71
2 жыл бұрын
What size tires and is that a factory lift? I know this is an old video, but I'm about to do my 2000 Silv. I tried the tiers and rims on, and had about an inch from the bumper to the front of the tire. "We'll see"! Thanks for the info
@603Mechanicvids
2 жыл бұрын
the tires are 265/75r16 and that is the oem suspension
@bigbonner3531
3 жыл бұрын
Did this adjustment change the camber to more positive camber ??
@603Mechanicvids
3 жыл бұрын
It did but very little
@mstrdonmyshrt4219
2 жыл бұрын
Is it the same method for a 99 Chevy 2500 2wd?
@603Mechanicvids
2 жыл бұрын
if your truck has torsion bars then yes this method will work for you
@RudeBoyRedd209
3 жыл бұрын
My truck has decent height stock from new shocks and front end suspension, if I raise my torsion bar do you think I’ll be able to fit some 315/75r16 (35’s) on her ? Thank you (99 Tahoe square body)
@603Mechanicvids
3 жыл бұрын
To be honest I'm not sure, it would definitely be a tight squeeze. I would recommend putting a lift in it. It also depends on the offset of you rims as well. You could look at some chevy forums on Google. Im sure there is someone that has tried this out there. Best of luck to you man👍
@RudeBoyRedd209
3 жыл бұрын
@@603Mechanicvids thanks man much appreciated,
@mrray7792
Жыл бұрын
Me watching the faith he has in that 1/2 inch ratchet lol
@nofx1420
3 жыл бұрын
Cool thx brah!
@Dontworryaboutitq
4 жыл бұрын
What kind of tires are those?
@603Mechanicvids
4 жыл бұрын
Dirt commander Centennial M/T and size is 265/75 R16
@Dontworryaboutitq
4 жыл бұрын
603 vids thanks bro. Keep up the good content
@zacharyd9029
3 жыл бұрын
Do you have to align the truck afterwards ?
@603Mechanicvids
3 жыл бұрын
Its recommended, anytime you adjust the height of a vehicle it changes your camber.
@sydpix
Жыл бұрын
Someone did this to my truck, and it now blows all over the road on windy days.
@righteous1229
3 жыл бұрын
Awesome
@farmalllover8217
2 жыл бұрын
Nice video. What’s wheels do you have
@603Mechanicvids
2 жыл бұрын
Thank you, Black rock series 929 black jack wheels and tires are Centennial Dirt Commander M/T LT265/75R-16
@farmalllover8217
2 жыл бұрын
@@603Mechanicvids what size Wheel and offset? I love the way they look
@603Mechanicvids
2 жыл бұрын
16×8 offset +13
@rigobertorivera6884
Жыл бұрын
What oíl used
@quedogkualum
4 жыл бұрын
What size tires are you running
@603Mechanicvids
4 жыл бұрын
265/75R16 and they are all terrains
@tonyklafter2876
4 жыл бұрын
I'm running the same size tires and they're all the same also
@JulianFRosales
Жыл бұрын
How do you lower the rear?
@Mcr59
Жыл бұрын
Cut springs but that’s stupid as fuck just don’t do that just raise the front
@ajec2451
2 жыл бұрын
don't forget that you're changing the camber of your wheels, to much and you'll have very uneven tire wear.
@ivanjamesjensen3057
2 жыл бұрын
Hey I had to crank mine down because I put shorter springs on the back of Tahoe . camber changed but on one side only why is that ?
@603Mechanicvids
2 жыл бұрын
are both sides adjusted the exact same? I'd go get an alignment done at a shop.
@ivanjamesjensen3057
2 жыл бұрын
@@603Mechanicvids Ya ride heights the same on both sides. k thanks
@brihan24
Жыл бұрын
what's the maximum on the stock keys?
@603Mechanicvids
Жыл бұрын
anywhere from 1.5" - 2"
@ethansgaming4980
2 жыл бұрын
Do your turn left or right to make it higher ??
@603Mechanicvids
2 жыл бұрын
turn it clockwise to raise it
@nestorsanchez6897
Жыл бұрын
You went counter-clockwise in the video at the first adjustment on the passenger side?
@revvedup68
2 жыл бұрын
U think I can fit 285 on it with cranking the torsion bars?
@603Mechanicvids
2 жыл бұрын
I believe they will fit
@603Mechanicvids
2 жыл бұрын
Look on some forums to see if anyone has had any luck doing this.
@jacobcormier4026
2 жыл бұрын
I run 285 on mine with no issues and never adjusted anything and it’s a 01
@imacarfreak6036
2 жыл бұрын
Got an 05 with 3" level kit motofab. Able to fit 33x12.5x20s with +12
@adryenmiles5709
2 жыл бұрын
What wheels and tires do you have?
@603Mechanicvids
2 жыл бұрын
wheels are steel Blackrock series 929 black jack and tires are Centennial Dirt Commander M/T LT265/75R-16 purchased from simple tire
@trentonharrison-5629
3 жыл бұрын
Does it still do good a year later
@603Mechanicvids
3 жыл бұрын
Yes its still good
@raylaux8295
2 жыл бұрын
Wrong method. You need to unload the tension with a unloading tool or a 2 jaw puller. Using the bolt fucks it up.
@ivanm5343
2 жыл бұрын
Which way do you turn to lower ??
@603Mechanicvids
2 жыл бұрын
counter-clockwise
@nolleluviano9427
2 жыл бұрын
Que medidas son tus llantas?
@603Mechanicvids
2 жыл бұрын
265 / 75 r16
@nolleluviano9427
2 жыл бұрын
@@603Mechanicvids Do you think that a 285/75 R 18 tire will fit a silverado without hitting the fender when turning, thanks
@603Mechanicvids
2 жыл бұрын
I'm not 100% sure but I believe they will rub when turning, if you did a little lift you'd be good
@nolleluviano9427
2 жыл бұрын
@@603Mechanicvids Thank you
@tbpc1
2 жыл бұрын
how much did that snap on jacket cost you?
@603Mechanicvids
2 жыл бұрын
unfortunately you can't just buy them it was a thank you for making like 15 or 20 payments on time. not cheap for the money I spent on snapon tools haha
@tbpc1
2 жыл бұрын
@@603Mechanicvids lmfao, i feel your pain, i got mine from paying on a $11,000 tool box, til i got smart, gave it back and bought my dream box on ebay 2 tear top and bottem (intimidator series) snap on box for $3000. and its bigger so all my tools fit, lol but i kept the jacket
@603Mechanicvids
2 жыл бұрын
damn $11,000 for a tool box thats insane, I need to get myself a nice big box I have tools all over the place. I will say the jackets are nice and warm and are definitely pretty strong as well
@jamesfoley9364
2 жыл бұрын
What rims are on that truck
@603Mechanicvids
2 жыл бұрын
blackrock series 929 black jack +13mm offset
@jamesfoley9364
2 жыл бұрын
@@603Mechanicvids what size are the wheels and tires because ngl I really like the look of your truck like the color to
@octoparrot36
3 жыл бұрын
What brand and size rims are those?
@603Mechanicvids
3 жыл бұрын
Dirt commander centennial M/T and the size are 265/75r16
@octoparrot36
3 жыл бұрын
@@603Mechanicvids cool! What about the wheels?
@John_D2
3 жыл бұрын
Rough country leveling keys , are $79. Way better than turning up your bolts , that makes it ride like shit.
Пікірлер: 197